Performance - Cupra Leon

Part of our IllumiNite range - an ultra bright white halogen replacement for your fog and cornering bulbs. 35W - 6500K Ice White Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering.

Read more less

Get this bottle of Ceramic QDS Absolutely FREE when you follow the steps below! YOU NEED TO ADD THIS TO YOUR CART! Simply complete the task below, add this item to your basket (Maximum of 1) and if you meet the criteria set out below, the bottle price will be removed from your basket! Task: Purchase any items that total OVER £50 (Excluding VAT) from one of the below collections  (Basically anything CEUK Branded, Enhanced Performance Branded or in our clearance) Car Enhancements UK Enhanced Performance Clearance Only so many available! 1 FREE BOTTLE PER ORDER ONLY! Alternatively if you wish to just buy one for £20 - thats also fine!

Read more less

Description Struggling to see when reversing? Need an #Enhanced Upgrade? With a brand new design, using lower powered led's with a higher lumen output, you can be sure that this is a fantastic upgrade for your vehicle! Consisting of 32 High powered LED's around the side, and 2 high power projection leds on the end these bulbs give a fantastic projection. We give you, the #Enhanced Edition 955 LED Unit Technical Info 12v Low Power useage / High Lumen Output 5000k Ice White in colour 34 SMD's perr LED Whats in the package? 2x 955 Enhanced Edition LED Unit's Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.  Fitting Video

Read more less

VBT Cross Drilled 340x30mm Front Brake Discs   The Vagbremtechnic brake discs are a direct replacement for your OE discs and have many additional benefits over a standard brake disc.   Highly durable anticorrosion coating that protects all product surfaces (internal and external)Extended service life due to improved anticorrosion durabilityPerformance pattern allowing greater cooling of braking surfaceImproved visual appearanceThe price is for 1 pair of discs FITS: AUDI A3 8V AUDI S3 8V AUDI TT 8S CUPRA ATECA CUPRA FORMENTOR CUPRA LEON SPORTSTOURER CUPRA LEON SEAT LEON MK3 5F SKODA OCTAVIA MK3 5E GOLF MK7 GOLF MK8

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb V3 This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Will fit in any vehicle which takes a H8 or H11 fitting provided you have about 1 inch of space behind the bulb! Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H8/11 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.   

Read more less

CEUK ChromoLite Indicator Upgrade Tired of the orange look of your current indicator bulbs? Want something different? Well here you go! Our indicator bulbs are a mirror reflective silver colour, But still glow Bright Orange. Not only are they brighter than standard, but they enhance the look of your car dramatically by taking away the horrible orange of factory bulbs! These bulbs are the offset pin type, please check they are correct for your car before ordering. Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

PFC13-14 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 13-14mm --- PFC15-16 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 15-16mm --- PFC17-18 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 17-18mm --- PFC19-20 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 19-20mm --- PFC21-22 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 21-22mm --- PFC23-24 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 23-24mm --- PFC25-27 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 25-27mm --- PFC28-30 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 28-30mm --- PFC31-33 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 31-33mm

Read more less

VBT Hooked Discs are the latest disc face design by AP Racing. Vagbremtechnic adapted the initial design onto OEM discs for the following reasons.  1.They give improved bite 2. For high temperature track day use they give better debris clearance and reduces distortion vibration. For road use we decided to opt for the version where the outer grooves do not run out to outside diameter but stay within the confines of the disc face. For road applications they also generate less noise than straight or curved groove discs and don't suffer the fatigue cracking that drilled disc users can experience after many heat cycles. So win win for VBT Hooked, Vagbremtechnic also take a non handed OEM casting and LeftRight the VBT Hooked pattern to ensure temperature stability and an appropriately designed disc face for either the nearside or offside of the car to give a good gas path despite not using a handed casting. We've seen some real success on a budget with these discs especially when used with a four piston caliper upgrade. Where they really come into their own though is when theyre combined with a more capable set of brake pads - this is a real track day enabler and we find customers finding other weaker areas of their car such as tyres and suspension now that their car stops reliably again and again. VBT Hooked is the homologated disc face for BTCC and has been for three years. FITS:  AUDI A3 8P AUDI A3 8V AUDI TT 8S CUPRA FORMENTOR CUPRA LEON SPOURTSTOURER CUPRA LEON SEAT LEON MK2 1P SEAT LON MK3 5F SKODA OCTAVIA MK2 1Z SKODA OCTAVIA MK3 5E VW BEETLE 1997-2010 VW CADDY 2K VW EOS VW GOLF MK5 VW GOLF MK6 VW GOLF MK7 VW GOLF MK8 VW JETTA 1B VW JETTA 1K VW SCIROCCO

Read more less

Please note: This product is for the 2020> Model with Brembo Calliper 300 BHP - If Unsure please get in touch! YELLOWSTUFF Yellowstuff ⁃ A first in a new range of 'Hybrid' materials that can be safely and legally used on worlds roads being R90 approved UK are a high friction upgrade pad for all fast street use Yellowstuff has been the flagship pad by EBC for over a decade and gives instant brake response, great feel and modulations with silk-smooth noise free braking and was also improved in 2021 to be copper free and conform to all new legislations for the environment and our pads are fully shimmed chamfered and slotted . Yellow arrives with pad surface Brake-in coating to accelerate pad bedding after install. 0.48 stable friction once bedded Strong initial bite ,work from cold Zero rotor damage Short to medium race lifetime Copper free for ECO compliance ✔ R90 Approved With a stable friction coefficient of 0.48μ right up to race temperatures of 450℃,Yellowstuff is a very popular pad amongst kit car drivers and lighter race cars having clinched the MX5 race series. Although heat scorched, the compound does require careful bedding in before race use,  If planning track use we recommend using the pad for a period on the street to pre bed before making a track excursion. If you require faster track bedding also consider our new Bluestuff R 90 approved compound which beds in faster. BLUESTUFF A great all round sport and race pad, revised to a new improved formula in 2021 for faster bed-in. Bluestuff material exhibits a 0.52μ stable friction once bedded stable up to a slightly higher 550℃/1000℉ than its sister compound yellow but with the benefit of 30% longer life than yellow. Blue has been a trackday favourite for years and is the spec pad for the BMW 318i Cup series throughout Europe.New formula is copper free to conform to upcoming environmental legislations 0.52μ stable friction once bedded Strong initial bite ,work from cold Zero rotor damage Copper free for ECO compliance Excellent upgrade pad for SUV and armored vehicles in street use ✔ R90 Approved Pads do require careful bedding in before track use.  Bluestuff also has good bite from cold and is an Aramid fibre base offering reduced rotor wear and has been popular with Trackday drivers due to its longer wear life than Yellowstuff, it's stablemate. RP-1 EBC Racing's RP‑1 compound is an ultra‑high performance track and race pad designed for high performance vehicles driven hard on track. RP‑1 has a very stable friction coefficient of 0.45μ up to and beyond 750℃, making it an excellent performer for even the most demanding vehicle applications. Due to its relatively high friction coefficient, RP‑1 is not Reg 90 homologated for road use within Europe and is therefore illegal for use on the public road. Unlike some other race pads on the market, RP‑1 offers a usable cold friction of 0.35μ below 100℃ meaning it can be safely used as a road pad for non‑European markets where Reg 90 homologation is not mandatory. At 100℃ the friction gently climbs to 0.45μ and stays there up to and beyond the designed upper working temperature range of 750℃. RP‑1 boasts good pad life but the unique characteristic of RP‑1 is that it boasts exceptionally low disc wear, lower than virtually all other competitor race materials tested by EBC Racing. RP‑1 has a progressive pedal feel with unrivalled modulation. RP‑1 does not have the snatchy pedal feel or high levels of noise often associated with other race pads on the market. Compared to EBC Racing's other track pad RP‑X, RP‑1 has a 25% reduction in friction coefficient across its working temperature range making RP‑1 the more suitable choice for light‑medium weight cars, cars with non EBC Big Brake Kits fitted, or vehicles with no ABS. For heavy or inherently under‑servoed vehicles which suit a very aggressive pad, EBC Racing's other track material RP‑X may be preferable. RP-X EBC Racings' RP‑X compound is an ultra‑high performance track and race pad designed for performance vehicles driven hard on track and for dedicated race cars. RP‑X has a very stable friction coefficient of 0.55μ up to and beyond 850℃, making it an excellent performer for even the most demanding vehicle applications. RP‑X also has a high friction level from cold, requiring no warmup to achieve maximum braking effect which makes this material well suited for sprint race and hill climb events. Although RP‑X is not R90 homologated for use on the public roads in EU member states, the fact this material possesses excellent cold performance means RP‑X can be safely used for driving to/from motorsport events (where local laws permit). EBC Racing does however emphasise that RP‑X has been developed for peak on‑track performance, meaning higher levels of brake dust and brake noise should be expected. RP‑X has comparable disc wear to many other popular track/race materials, however RP‑X disc wear is considerably greater than EBC Racing's other track pad RP‑1 which results in high levels of brake dust. Compared to RP‑1, RP‑X has a 25% increase in friction coefficient across its working temperature range with a much more 'positive' initial bite. This characteristic potentially makes RP‑X more suitable on heavy or inherently under‑servoed vehicles. For light‑medium weight vehicles, cars with non EBC Big Brake Kits fitted, or vehicles with no ABS, the less fierce nature of EBC Racing's other track material RP‑1 may be preferable.

Read more less

Description We introduce to you the IllumiNite D2S Bi Xenon replacement bulb upgrade!  A simple replacement unit, completely plug and play providing phenomenal results. Suitable for any D2S application including self leveling headlights. Upto 50% Brighter than OEM / Standard Headlights providing a safer driving experience at night but without causing glare to other drivers. Suitable for Projectors - Will not burn lenses! Technical Specs Colour: 6000K White Power: 12v / 35w Fitment: D2S Xenon / HID Pack Contents 2x D2S Bulbs Guarantee Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. 14 day Money back guarantee if unsatisfied Subject to product being returned at Buyers cost in a re salable condition!

Read more less

Description: When traveling Abroad, or even in the UK its always best to have a tyre inflator in your vehicle! 12v with fused cigerette lighter plug - up to 300psi. Complete with adapter kit for football and bicycle. 3mtr Cable - Enough to use even on large vehicles.

Read more less

Description: The Slime Smart Spair is "THE SMART WAY TO FIX FLATS FAST". No need to jack-up the car or remove the wheel - just install Slime tyre sealant, plug in the air compressor, turn it on, reinflate and go. Stow it under your car seat or in the boot - The Smart Spair offers a portable solution for flat tire repair. No need to remove the tyre. No need to wait for recovery assistance. Avoid dangerous roadside delays. Fix a flat fast - in 15 minutes or less! Emergency repair kit fixes a in 15 minutes No need to remove the tire 300psi 12v Tyre inflator with adapters included Includes a bottle of Slime tire sealant and a portable air compressor Seals punctures up to a quarter-inch Repairs punctures up to 6mm in tubeless tyres Comes with adapters to inflate mattresses, balls or other inflatables

Read more less