Performance - Renault Megane MK4 RS280 & 300

This reinforced silicone intake hose fits the Renault Megane RS 4 280 & 300. Due to its location it really improves the aesthetics of the engine compartment and removes the restrictions found inside the OEM plastic hard pipe.  Complete with hose clamps these are available in red, yellow, blue, or black. Please select your choice in the options above when ordering. This hoses replaces the OEM Renault pipe, part number: 16 57 542 63R   Highlights:  The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically Lifetime warranty*     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This Blow Off, or dump valve, is for the Renault and Nissan Turbo engines that have the electronically controlled bypass valve (OEM Part no. 144839204R). It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred. Unfortunately, the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this. This prevents the diaphragm from sealing. Our alternative is a fully engineered solution offering both significantly improved reliability. The Forge valve is piston based, there is no diaphragm to fail, and of all aluminium billet construction, it replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control, over valve actuation. In The Box:1 x FMDV23A Valve1 x 2000mm of 4mm Vacuum Tube1 x 50mm of 10mm Vacuum Tube1 x 3 port Solenoid and fixings13 x Cable Ties1 x Uprated Red Spring1 x 10-6-10 T Piece1 x Forge USB Instructions1 x Forge Keyring and Sticker If you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Forge designed these silicone hoses so they can withstand pressures that can be experienced on tuned and remapped engines. They will long outlast the original hoses and with our limited lifetime warranty on all Forge products; you can be sure these hoses won't let you down. This boost hose kit includes four Fluorosilicone lined hoses, two CNC machined billet couplers, and all the hose clamps required. To replace the following OEM parts: 144605812R 144632831R 144636922R     Highlights: Available in four colour options; red, blue, black, or yellow Hose included in the kit has a quality inner lining of modified silicone known as 'Fluorosilicone'. This means that the hose will stay bright and vibrant, and will not deteriorate over time. Forge Motorsport fluorosilicone lined hoses are suitable to be used with modern long-life coolants, Organic Acid Technology coolants (O.A.T.) and oil mist. The construction of the hose has been engineered to exceed that of the OEM fitments, the Forge Motorsport hose will enhance any engine bay both technically and aesthetically. Lifetime warranty* *T&C’s apply If you are unsure if this product is suitable for your application, please contact us.      Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Scorpion Exhausts Renault Megane RS280 GPF/ RS300 Trophy Resonated Cat/GPF-back system Fits Years 2019 to 2020 Fits to OEM / Scorpion Pipe Diameter 76mm/3 With a history stretching back over 120 years Renault have a long association with motorsport winning the first Grand Prix motor racing event in 1906 through to the modern era where they have had more notable success in Rallying and Formula one. This rich racing heritage fuelled the release of numerous fast road cars over the years including some of the original hot hatches like the Renault 5 Turbo and Clio Williams. Since the early 1990’s Scorpion have been producing highly sought-after performance exhausts for these fast road cars. Constructed from premium T304 stainless steel, the GPF-back system features 76mm / 3" pipework for high flow. The innovative exhaust system has been acoustically designed to deliver a sporty soundtrack which doesn't drone or create any unwanted frequencies in the cabin. Customers can configure the system to their personal preferences with the choice of a resonated (quieter) or non-resonated (sportier) centre section. Using the latest manufacturing techniques, the GPF-back system weighs less than the OE exhaust which further enhances the already excellent handling chassis. As well as reducing weight, the exhaust increases the Trophy's performance and improves throttle response. For those top tier tuners looking to extract more performance out the 1.8-litre turbo charged engine can look to include the innovative GPF delete / de-cat downpipe to their setup. It's precisely constructed from T304 76mm / 3" pipework and can be installed directly to the OE or Scorpion system making it fully interchangeable.   TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SRN032 Product Type Cat-Back Resonated Resonated Fitment Years 2019 - 2022 Fits To OEM / Scorpion Model Fitment Megane RS280 GPF/ RS300 Trophy Pipe Diameter 76mm/3" * Tailpipe Special Shipping Dimensions 119cm x 60cm x 28cm Notes OE Silencer needs cutting to be removed, Rear Parking Sensors must be unplugged and the Rear Valance removed during installation. Uses OE tailpipes. O.E Valve is removed when fitting to Trophy edition. OEM Scorpion Change Weight Difference 16.35 KG 16 KG -0.35 KG

Read more less

Scorpion Exhausts Renault Megane RS280 (Non GPF) Resonated cat-back system Fits Years 2018 to 2018 Fits to OEM / Scorpion Pipe Diameter 76mm/3 With a history stretching back over 120 years Renault have a long association with motorsport winning the first Grand Prix motor racing event in 1906 through to the modern era where they have had more notable success in Rallying and Formula one. This rich racing heritage fuelled the release of numerous fast road cars over the years including some of the original hot hatches like the Renault 5 Turbo and Clio Williams. Since the early 1990’s Scorpion have been producing highly sought-after performance exhausts for these fast road cars. Constructed from premium T304 stainless steel, the GPF-back system features 76mm / 3" pipework for high flow. The innovative exhaust system has been acoustically designed to deliver a sporty soundtrack which doesn't drone or create any unwanted frequencies in the cabin. Customers can configure the system to their personal preferences with the choice of a resonated (quieter) or non-resonated (sportier) centre section. Using the latest manufacturing techniques, the GPF-back system weighs less than the OE exhaust which further enhances the already excellent handling chassis. As well as reducing weight, the exhaust increases the Trophy's performance and improves throttle response. For those top tier tuners looking to extract more performance out the 1.8-litre turbo charged engine can look to include the innovative GPF delete / de-cat downpipe to their setup. It's precisely constructed from T304 76mm / 3" pipework and can be installed directly to the OE or Scorpion system making it fully interchangeable.  TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SRN031 Product Type Cat-Back Resonated Resonated Fitment Years 2018 - 2018 Fits To OEM / Scorpion Model Fitment Megane RS280 (Non GPF) Pipe Diameter 76mm/3" * Shipping Dimensions 119cm x 60cm x 28cm Notes OE Silencer needs cutting to be removed, Rear Parking Sensors must be unplugged and the Rear Valance removed during installation. Uses OE tailpipes OEM Scorpion Change Weight Difference 17.45 KG 16 KG -1.45 KG

Read more less

Scorpion Exhausts Renault Megane RS280 (Non GPF) Non-resonated cat-back system Fits Years 2018 to 2018 Fits to OEM / Scorpion Pipe Diameter 76mm/3 With a history stretching back over 120 years Renault have a long association with motorsport winning the first Grand Prix motor racing event in 1906 through to the modern era where they have had more notable success in Rallying and Formula one. This rich racing heritage fuelled the release of numerous fast road cars over the years including some of the original hot hatches like the Renault 5 Turbo and Clio Williams. Since the early 1990’s Scorpion have been producing highly sought-after performance exhausts for these fast road cars. Constructed from premium T304 stainless steel, the GPF-back system features 76mm / 3" pipework for high flow. The innovative exhaust system has been acoustically designed to deliver a sporty soundtrack which doesn't drone or create any unwanted frequencies in the cabin. Customers can configure the system to their personal preferences with the choice of a resonated (quieter) or non-resonated (sportier) centre section. Using the latest manufacturing techniques, the GPF-back system weighs less than the OE exhaust which further enhances the already excellent handling chassis. As well as reducing weight, the exhaust increases the Trophy's performance and improves throttle response. For those top tier tuners looking to extract more performance out the 1.8-litre turbo charged engine can look to include the innovative GPF delete / de-cat downpipe to their setup. It's precisely constructed from T304 76mm / 3" pipework and can be installed directly to the OE or Scorpion system making it fully interchangeable.  TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SRNS031 Product Type Cat-Back Resonated Non-resonated Fitment Years 2018 - 2018 Fits To OEM / Scorpion Model Fitment Megane RS280 Pipe Diameter 76mm/3" * Shipping Dimensions 119cm x 60cm x 28cm Notes OE Silencer needs cutting to be removed, Rear Parking Sensors must be unplugged and the Rear Valance removed during installation. Uses OE tailpipes OEM Scorpion Change Weight Difference 17.45 KG 15 KG -2.45 KG

Read more less

Scorpion Exhausts Renault Megane RS280 (Non GPF) De-cat downpipe Fits Years 2018 to 2018 Fits to OEM / Scorpion Pipe Diameter 76mm/3 With a history stretching back over 120 years Renault have a long association with motorsport winning the first Grand Prix motor racing event in 1906 through to the modern era where they have had more notable success in Rallying and Formula one. This rich racing heritage fuelled the release of numerous fast road cars over the years including some of the original hot hatches like the Renault 5 Turbo and Clio Williams. Since the early 1990’s Scorpion have been producing highly sought-after performance exhausts for these fast road cars. Constructed from premium T304 stainless steel, the GPF-back system features 76mm / 3" pipework for high flow. The innovative exhaust system has been acoustically designed to deliver a sporty soundtrack which doesn't drone or create any unwanted frequencies in the cabin. Customers can configure the system to their personal preferences with the choice of a resonated (quieter) or non-resonated (sportier) centre section. Using the latest manufacturing techniques, the GPF-back system weighs less than the OE exhaust which further enhances the already excellent handling chassis. As well as reducing weight, the exhaust increases the Trophy's performance and improves throttle response. For those top tier tuners looking to extract more performance out the 1.8-litre turbo charged engine can look to include the innovative GPF delete / de-cat downpipe to their setup. It's precisely constructed from T304 76mm / 3" pipework and can be installed directly to the OE or Scorpion system making it fully interchangeable.  TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SRNC031 Product Type Turbo-Downpipe Fitment Years 2018 - 2018 Fits To OEM / Scorpion Model Fitment Megane RS280 (Non GPF) Pipe Diameter 76mm/3" * Shipping Dimensions 73cm x 32cm x 32cm Closed Circuit Product Yes OEM Scorpion Change Weight Difference 6.36 KG 2.6 KG -3.76 KG

Read more less

FRONT SPLITTER RENAULT MEGANE MK4 GT-LINE (2016-) Fits only: RENAULT MEGANE MK4 GT-LINE (2016-)   COMPLETE SET CONTAINS:-> Splitter/Front Bumper Lip Spoiler-> Mounting Kit-> Mounting Manual   Fitting manual: https://www.maxtondesign.co.uk/pdf/splitter_fitting-manual-maxton.pdf   Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our

Read more less

REAR SIDE SPLITTERS RENAULT MEGANE MK4 GT-LINE (2016-) Fits Only:  RENAULT MEGANE MK4 GT-LINE (2016-)   COMPLETE SET CONTAINS:-> Rear Side Splitters (Left & right)-> Fitting manual / Fitting kit https://www.maxtondesign.co.uk/pdf/rear-side-splitters_fitting-manual-maxton.pdf Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure. We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our

Read more less

FRONT SPLITTER V.1 Renault Megane IV RS (2018-2020) Fits only: Renault Megane IV RS (2018-2020)   COMPLETE SET CONTAINS:-> Splitter/Front Bumper Lip Spoiler-> Mounting Kit-> Mounting Manual   Fitting manual: https://www.maxtondesign.co.uk/pdf/splitter_fitting-manual-maxton.pdf   Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our

Read more less

FRONT SPLITTER V.2 RENAULT MEGANE IV RS (2018-2020) Fits Only: Renault Megane IV RS (2018-2020)   COMPLETE SET CONTAINS:-> Splitter/Front Bumper Lip Spoiler-> Mounting Kit-> Mounting Manual   Fitting manual: https://www.maxtondesign.co.uk/pdf/splitter_fitting-manual-maxton.pdf Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our

Read more less

SIDE SKIRTS DIFFUSERS RENAULT MEGANE MK4 RS (2018-2020) fits only: Renault Megane MK4 RS (2018-2020)   COMPLETE SET CONTAINS:    SIDE SKIRTS DIFFUSERS  Mounting kit   Product is made of ABS plastic. ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility.   This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less