Turbos

This product is built with a predetermined actuator spring suitable for at, or slightly above factory boost levels. The actuator can be assembled with a stiffer spring upon request. Please contact us directly concerning this process It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket. Forge Motorsport nor any of it’s authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. After requests for a very durable, fit and forget version of our actuators that would withstand the rigors of marine corrosion or simply would not tarnish, we have now added the option of ordering any of our piston design actuators with stainless steel bodies and external components/fixings. This option does incur a surcharge and will be shown when added to your basket. Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Please contact us by email if you require more information. In The Box:1 x FMNEONACT Actuator1 x Forge Sticker This actuator is built with a Blue coded spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Piston option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Please read the following notes carefully to ensure you select the correct actuator for your turbo. Fiat 500 T-Jet, Fiat Grande Punto T-Jet (including Abarth versions), Abarth T-Jet, and Alfa Mito T-Jet have the IHI turbo fitted as standard. Please select the product code FMACF500 (IHI turbo) in the above drop down menu if you have one of these vehicles.  Fiat 595 145BHP, Fiat 595 Trofeo 160BHP, Fiat 595 Turismo 165BHP, Fiat 595 Competizione 180BHP, and Fiat 695 Rivale 180BHP have either the IHI or Garrett turbo fitted as standard. Please select FMACF500 (IHI turbo) from the option menu if your 595/695 model has the IHI turbo as standard. Select FMACF14 (Garrett) if your model has the Garrett turbo as standard. Please refer to the images of the stock actuators below if you are unsure. Otherwise please refer to a Fiat Tuner for advice or contact us on 01452380999 IHI turbo stock actuator – mounting bracket fixed to actuator body. IHI turbo stock actuator (in situ) – mounting bracket fixed to actuator body. Garrett turbo stock actuator (in-situ) – mounting bracket fixed to turbo housing Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMACF500/FMACF14 Actuator1 x Forge Sticker This actuator is built with a stock spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

A turbo actuator for the Fiat Punto Evo, Fiat 124 Spider, Fiat 500 and Jeep Renegade (Multi Air Engine ONLY) This actuator fits directly to the turbocharger casting. Therefore no additional brackets is required. Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMACFPEVO Actuator1 x Forge Sticker This actuator is built with a stock spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 3, 048 option   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

The Revo 2.0TFSI Stage 3 turbo kit combined with Revo Stage 3 performance software gives the 2.0TFSI an entirely new lease of life, seeing close to 350bhp and 350lbft along with increases throughout the rev-range making for not just a powerful car but a true all-round performance car. Whether you have a 2.0TFSI VW MK5 Golf GTi, a SEAT Leon FR, Skoda Octavia VRS or even a SEAT Altea our high-quality stage 3 package is designed to provide not just power gains but improved drivability, giving you an incredibly capable and rewarding vehicle to drive. The automotive-grade silicone hoses have been designed in-house with stepped necks so the transition of airflow is smooth throughout the system, the intake hose on the TSI has been designed to allow you to reduce the neck size to accommodate the factory intake set up or an aftermarket intake with 3 varying reducers. The diverter valve relocation features a one-piece machined housing for the OE part to bolt to and then connect to the new silicone hoses. BENEFITS +350 BHP +350 LBFT Torque Genuine Borg Warner Turbo Stepped Silicone Hoses Smooth Power Delivery   REVO QUALITY The Borg-Warner turbo has been modified to Revo’s exact standards and features a set of custom silicone hoses which relocates the factory diverter valve. The Revo Borg Warner K04 - 0064 benefits from a re-designed outlet that not only removes the OEM resonator but increases airflow, as with all Revo products the quality of the work is second to none. Our comparison images show the quality/ superiority over competitor K04 turbos on the market. The kit comes complete with all new gaskets, bolts and fittings required for installation.   POWER & TORQUE   Power (BHP) Power (kW) Torque (lbft) Torque (Nm) OEM Stock 186 / 197 136 / 146 207 280 Revo Stage 3 297 - 347 221 - 258 307 - 347 416 - 470     Notes: Recommended Revo Authorised Dealer Fitment only Please contact your local Revo Authorised Dealer for additional information and availability. © Revo

Read more less

TECHNICAL DATA AIRTEC Motorsport turbo cooler for Astra H VXR. Ideal for fast road and race!Designed to help cool the super heated water which comes out of the turbo before it goes back into the water header tank. By fitting a turbo cooler you are increasing efficiency of your cooling system, in return will help lower engine temperature Complete with full fitting instructions for an easy install. Features: 1x AIRTEC turbo cooler 2x Pro Hoses silicone hoses 1x Fixing bracket 1x Fitting instructions All relevant fixings / fixtures

Read more less