Filters
Airtec AIRTEC Stage 2 Induction Kit for 1.0-litre EcoBoost 100ps, 125ps & 140ps
The new design Stage 2 induction kit that works perfectly with the standard 1.0L 100ps, 125ps & new 140ps Fiesta EcoBoost. Expect to see gains of 5-10bhp compared to the original Airbox. Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. Features. Removes ugly original plastic & restrictive airbox Adds power and torque more responsive and exciting driving experience Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') free flowing Airfilter CNC maf sensor boss with AS engraved logo Powder coated alloy heat-shield with 80mm cold feed pipe which directs air to bottom of filter Cold feed pipe, secure to bottom of -shield and secures to lower boost hose, or attach to front lower bumper as shown in the photo Adds style to your engine bay Easy fitting, takes less than 15-20 minutes to install Conclusion. It's easy to fit, looks great, sounds even better, doesn't cost the earth and can be put back to standard within 10 minutes (warranty) A simple modifcation that transforms the look of your engine bay. Choose from Red filter or Black Foam Filter AS good AS it gets. Comes with 24 month warranty 'conditions apply' Please note: during busy periods silicone hoses may need to be made to order and as a result this delay could be 10-14 days. Please take this into consideration prior to ordering!
£170.11 - £266.74
Airtec AIRTEC Stage 2 Induction Kit for MK7 Fiesta ST 1.6 EcoBoost ST180 / ST200 1.6 ECOBOOST
The new design Stage 2 induction kit that works perfectly with the standard Fiesta ST180. Expect to see gains of 5-10bhp compared to the original Airbox. Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. Features. Removes ugly original plastic & restrictive airbox Adds power and torque, more responsive and exciting driving experience Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') free flowing Airfilter & optional k&n dry charger filter cover CNC maf sensor boss with AS engraved logo Powder coated alloy heat-shield Adds style to your ST engine bay Easy fitting, takes less than 15-20 minutes to install Conclusion. It's easy to fit, looks great, sounds even better, doesn't cost the earth and can be put back to standard within 10 minutes (warranty) Choose from Red filter or Black Foam Filter Please note: during busy periods silicone hoses may need to be made to order and as a result this delay could be 10-14 days. Please take this into consideration prior to ordering!
£162.47 - £262.72
Enhanced Performance 1.0 EcoBoost Enhanced Performance Intake System - MK7 Fiesta
Description The Brand New CEUK Stage 2 Enhanced Intake system that works perfectly with the standard 1.0L 100ps, 125ps & new 140ps Fiesta EcoBoost. Expect to see gains of 5-10bhp compared to the original Airbox.#Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. And only £132.50!! Easy fitting, takes less than 15-20 minutes to install Enhancing both sound, Looks AND Performance this kit is a must have for all enthusiasts starting their modified Journey, Complete with a lifetime Guarantee Features: - CEUK “C” Logo To allow air into the filter - Removes ugly original plastic & restrictive airboxAdds power and torque - more responsive and exciting driving experience - #Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') What’s Included? 1x CEUK #Enhanced Filter Cage 1x Car Specific MAF Duct 1x Free Flowing Cotton Air Filter 1x Fitting Kit! Guarantee Lifetime Warranty and Guarantee on all Enhanced Intake Systems
£166.74£166.73
Airtec AIRTEC MOTORSPORT INDUCTION KIT FOR FIESTA MK8 1.0 & ST-LINE (FRONT TURBO)
The new AIRTEC Motorsport induction kit that works perfectly with the standard 1.0 Fiesta Mk8 ST-Line.Expect to see gains of 5-10bhp compared to the original Airbox.Please note: This kit is designed to fit the pre 2020 model that has the turbo at the front. for the 2020-onwards 1.0 EcoBoost model with the turbo at the rear please see: INDUCTION KIT FOR FIESTA MK8 1.0 & ST-LINE (REAR TURBO 2020 ONWARDS) Enhanced induction sound, great looks and loud recirculation dump valve noise on let off.Features: Removes ugly original plastic & restrictive airboxAdds power and torquemore responsive and exciting driving experienceEnhanced induction sound and turbo recirculation noise (dump valve ‘psssh’)free flowing Airfilter & optional k&n dry charger filter coverCNC maf sensor bossPowder coated alloy heat-shield with 80mm cold feed pipe which directs air to bottom of filterCold feed pipe, secure to bottom of heat-shield and secures to lower boost hose, or attach to front lower bumper as shown in the photoAdds style to your engine bayEasy fitting, takes less than 15-20 minutes to install It’s easy to fit, looks great, sounds even better, doesn’t cost the earth and can be put back to standard within 10 minutes (warranty)A simple modification that transforms the look of your engine bay. Please note: Bolt needs cutting if fitting optional silicone hose. Registered Design Right number 6023921 AIRTEC part no: ATIKFO17
£158.54 - £257.59
Airtec AIRTEC Motorsport induction kit for Fiesta MK8 1.5 ST
The new AIRTEC Motorsport induction kit that works perfectly with the standard 1.5 ST 200 Mk8 Fiesta. Expect to see gains of 5-10bhp compared to the original Airbox. Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. Add a pro Silicone Hose - Price includes hose clamps Features: Removes ugly original plastic & restrictive airbox Adds power and torque more responsive and exciting driving experience Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') free flowing Airfilter & optional k&n dry charger filter cover CNC maf sensor boss Powder coated alloy heat-shield with 80mm cold feed pipe which directs air to bottom of filter Cold feed pipe, secure to bottom of heat-shield and secures to lower boost hose, or attach to front lower bumper as shown in the photo Adds style to your engine bay Easy fitting, takes less than 15-20 minutes to install It's easy to fit, looks great, sounds even better, doesn't cost the earth and can be put back to standard within 10 minutes (warranty) A simple modifcation that transforms the look of your engine bay. Please note: during busy periods silicone hoses may need to be made to order and as a result this delay could be 10-14 days. Please take this into consideration prior to ordering!
£170.11 - £273.37
Enhanced Performance 1.0 EcoBoost MK8 Fiesta (Pre 2020) - Enhanced Performance Induction Kit
Please note: Will not fit september 2020 models onward as ford have changed the engine! Description The Fully Re-Designed Intake Kit from Enhanced Performance adds both performance and visual beauty to your MK8 Fiesta 1.0 EcoBoost Expect to see gains of around 5-10BHP from stock, this kit will also function exceptionally along side any stage 2 remap. You can also run this induction kit on a fully standard EcoBoost with no issues! Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. Features Removes ugly original plastic & restrictive airbox. Adds power and torque more responsive and exciting driving experience Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') free flowing Cone Airfilter CNC sensor boss Powder coated alloy heat-shield with C Performance logo laser cut into it. Adds style to your engine bay Easy fitting, takes less than 15-20 minutes to install (See guide here) Whats in the kit? 1x Enhanced Performance MK8 Heat shield powder coated black 1x CNC Sensor Tube 1x Choice of Cone Air Filter 1x Fitting Kit Warranty 12 months as standard! Videos Induction Kit Whilst Driving
£150.00
Enhanced Performance MK8 / MK8.5 Fiesta ST - Enhanced Performance Intake System
Description The Fully Redesigned Enhanced Performance Intake system that works perfectly with the standard or modified Fiesta MK8 ST & MK8.5Expect to see gains of 5-10bhp compared to the original Airbox.#Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. And starts from only £150!! Easy fitting, takes less than 15-20 minutes to install Enhancing both sound, Looks AND Performance this kit is a must have for all enthusiasts starting their modified Journey, Complete with a lifetime Guarantee Get your car ready for stage 2 and beyond! Features - CEUK “EP” Logo In Chrome - Removes ugly original plastic & restrictive airbox - Adds power and torque - more responsive and exciting driving experience - #Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') Choice of Air Filter Whats included: 1x CEUK #Enhanced Filter Cage 1x Sensor Housing Tube 1x High Flowing Cotton Air Filter 1x Fitting Kit! Video: Guarantee Lifetime Warranty and Guarantee on all Enhanced Intake Systems
£150.00
Airtec AIRTEC Stage 2 Induction Kit for Focus MK3 ST Facelift/Pre-Facelift
The new design Stage 2 induction kit that works perfectly with the standard Focus ST 250. Expect to see gains of 5-10bhp compared to the original Airbox. Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off Features. Removes ugly original plastic & restrictive airbox Adds power and torque, more responsive and exciting driving experience Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') free flowing Airfilter & optional k&n dry charger filter cover CNC maf sensor boss with AS engraved logo Powder coated alloy heat-shield with 80mm cold feed pipe which directs air to bottom of filter Adds style to your engine bay Easy fitting Conclusion. It's easy to fit, looks great, sounds even better, doesn't cost the earth and can be put back to standard quickly (warranty)
£358.58
Enhanced Performance MK7 Fiesta ST180/200 Enhanced Performance Enhanced Intake System
Description The Brand New CEUK Stage 2 Enhanced Intake system that works perfectly with the standard Fiesta ST180 & ST200. Expect to see gains of 5-10bhp compared to the original Airbox.#Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. And only £132.50!! Easy fitting, takes less than 15-20 minutes to install Enhancing both sound, Looks AND Performance this kit is a must have for all enthusiasts starting their modified Journey, Complete with a lifetime Guarantee Features: - CEUK “C” Logo To allow air into the filter - Removes ugly original plastic & restrictive airboxAdds power and torque - more responsive and exciting driving experience - #Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') What’s Included? 1x CEUK #Enhanced Filter Cage. 1x Car Specific MAF Duct 1x Free Flowing Cotton Air Filter 1x Fitting Kit! Guarantee Lifetime Warranty and Guarantee on all Enhanced Intake Systems
£145.00
Airtec AIRTEC Stage 3 Induction Kit for ST180/ST200
The new design Stage 3 induction kit that works perfectly with the standard Fiesta ST180. Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. Features. Removes ugly original plastic & restrictive airbox Replaces bigger silicone hoses with hard pipes Adds more power and torque, more responsive and exciting driving experience Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') free flowing Airfilter & optional k&n dry charger filter cover CNC maf sensor boss with AS engraved logo Powder coated alloy heat-shield Adds style to your ST engine bay Easy fitting, takes less than 15-20 minutes to install Conclusion. It's easy to fit, looks great, sounds even better, doesn't cost the earth and can be put back to standard within 10 minutes (warranty) AS good AS it gets. Comes with 24 month warranty 'conditions apply' Will fit Fiesta ST 200 Please note: during busy periods silicone hoses may need to be made to order and as a result this delay could be 10-14 days. Please take this into consideration prior to ordering!
£358.57 - £370.73
RamAir RamAir Pro Ram Cotton Filter - 70mm
These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of motorsport filtration the PRORAM range by Ramair is the premium choice on the market today for your fast road or track car. Neck Inside Diameter (A):70mm Overall Width (B): 150mm Overall Length: 185mm Component Dimensions Base Width: 150mm Base Length: 37mm Filter Top Width (D): 120mm Filter Base Width: 150mm Filter Length (C): 148mm Item Specifics Base Material: Rubber Polymer Base Finish: Gloss Base Colour: Black Filter Material: Synthetic Filter Reinforcement: Black Wire Mesh If 70mm Filters are sold out, you may receive a 90mm Inlet filter with a 70mm reducer ring! TECHNICAL SPECS Neck Internal Diameter 70mm EAN 5056185609656
£51.62
ITG Filters Fiesta ST180 1.6T ITG Intake System
Motorsport Filtration Technology Induction Technology Group (ITG) are the suppliers for the highest level of motorsport including championship winning F1, WRC and BTCC teams. This same technology and design skill has filtered into their range of fast road / track day products. The Fiesta ST's standard air box is a major restriction when the power levels are increased, the ITG cold air system makes improvements over the standard design in every aspect. Spec List Perfect location for cold high pressure air Heat soak is reduced Short direct path for air flow High quality world leading multi layer foam design Filter size increase by over 50% Perfectly sized CNC MAF housing means short term fuel trims are not affected Increased turbo intake noise and divertor valve discharge PERON proven to over + 300HP - we use this kit on all stock turbo, hybrid and P3XX turbo systems at power levels in excess of 370hp Applications Fits all global 2013 and newer Ford Fiesta ST 1.6T
£269.99
Revo FORD FIESTA ST MK8 | REVO AIR INTAKE SYSTEM
REVO OPEN CONE AIR INTAKE SYSTEM FORD FIESTA ST MK8 1.5 ECOBOOST The Revo open cone Air Intake System for the 1.5 EcoBoost engine improves performance and offers an aggressive intake sound. Ensuring your engine can get access to enough air is paramount when increasing power; more air means more power throughout the rev-range. Only Revo Air Intake Systems are specifically designed to work in harmony with your vehicle and Revo ECU Software. Engineered to directly replace the stock airbox, pipework and filter, this kit comes complete with a front silicone hose, aluminium pipe, heat shield, filter, turbo inlet silicone and fitting kit. KEY FEATURES Increased Performance & Air Flow Efficiency Three Stage Foam Filter Direct filter to turbo fitment Stepped Silicone for smooth airflow OEM VS REVO When you begin to enhance performance, the restrictive OEM intake struggles to flow enough air, robbing the engine of power. The Revo Air Intake System removes these restrictive elements promoting smoother airflow. Open Cone systems replace the OEM air box to make space for the heat shield, filter and pipework which joins directly to the turbo. Revo Flush Fit silicone hoses avoid unwanted turbulence at joins and increase the rate at which air can flow ensuring maximum performance at any level of tuning. CROSS OVER PIPE The Revo engineering team knew that to create the most effective kit, every component had to be considered to maximise and smooth airspeed. The system is designed around the single-piece aluminium cross over pipe, mandrel-bent to maintain the internal diameter in the corner and to remove the restrictions found in the OEM pipe. The direct routing and increased diameter pipe offer superior flow and deliver more air to the turbocharger over a shorter period. SILICONE HOSES The plastic hoses on the stock system are designed with a corrugated style to flex with the engine movement, while this has its place it also causes a large amount of turbulence as the airflow doesn’t have a smooth direct path to the turbo. We designed the silicone hoses with stepped internals to ensure a flush fit and to minimise turbulence while still allowing for engine movement. The turbo inlet hose has an increased inner diameter that gradually tapers from the hard pipe to turbo to optimise airflow. AIR FILTER An intake system is only as good as the filter. This kit comes complete with a custom Revo foam filter, supported by galvanised epoxy-coated mesh for strength under load. Revo three-stage foam filters work very differently to conventional paper or cotton-gauze alternatives designed to trap particles on the outer layer. Revo filters trap debris and particles within the foam layers, allowing air to still navigate through. The spun base of the filter offers a smooth radius aluminium bell mouth, specifically designed for optimum airflow from the filter to pipe-work. HEATSHIELD Ensuring the engine has access to cold air is vital for performance. The Revo heat shield channels cold air from the front intake duct while partitioning the filter from the heat of the engine bay. The Revo Heatshield uses the stock mounting points to provide easy and secure installation. MOUNTING BRACKET AND FITTING KIT The Revo kits come complete with a full fitting kit that allows for easy installation. Included is a fully machined crossover bracket which increases the strength of this fixture point and alleviates any possibility of bracket failure from engine movement. RESEARCH AND DEVELOPMENT All Revo products are designed in-house and are rigorously tested utilising an in-house 3D printer, latest CAD and CFD programs, hub dyno and Revo data acquisition software. The Revo intake allows the turbo to run more efficiently, intake a larger volume of air and minimise turbulence to increase both power and torque, as highlighted during controlled dyno testing. The Revo Fiesta Mk8 open cone air intake system was tested in-house to compare the performance against that of the Ford OEM intake. First tested on a vehicle running the OEM intake with Revo Stage 1 software, Revo Intercooler and a Milltek GPF back exhaust, the Revo intake was then installed and tested in the same controlled environment to highlight the benefits of enhanced cooling. PERFORMANCE DATA The results show improvement throughout the whole rev range, but especially towards the top end of the rev range. The Revo intake offering an average gain of +7WHP, and +11NM torque over the stock part. Increased airflow also delivers impressive peak performance gains of +14WHP @6200rpm and +19NM @5100RPM over the stock intake system. AIRFLOW More air, less restriction. The Revo system was tested on a flow bench to highlight the kits efficiency in allowing more air to reach the turbo, quickly and with less restriction. The OEM system reached its maximum potential of 490 cubic feet per minute with a restriction of 1082 mmWg, compared to the Revo system which was able to flow 700 CFM with a restriction of only 965 mmWg. This difference allows the engine to still make power at the top of the rev limit, whilst also highlighting the efficiency and less restriction at the lower end, resulting in smoother and increased throttle response. FITMENT VEHICLE APPLICATIONS Manufacturer Model Engine Year Ford Fiesta ST 1.5 EcoBoost 2018 onwards DOCUMENTS The following documents are available to view: FITTING INSTRUCTIONS Download the Revo Ford Fiesta MK8 ST Open Cone Intake System Instructions NOTES Simple replacement of the OEM part
£425.00
RamAir RamAir Intake kit - MK8 Fiesta ST
This full air box replacement induction kit is designed specifically for the Ford Fiesta ST MK8 1.5 Ecoboost. This kit allows for increase in airflow and induction noise over the factory intake equipment. The heat shield replaces the factory air box and mounts to standard OEM mounting points, it also replaces the standard intake hose. Whilst an ECU remap is not required, it will help you make the most of the increased potential airflow.
£222.83
Enhanced Performance CEUK Enhanced Performance MK7 Fiesta Maf Duct & Air Filter Assembly
Fiesta Mk 7 C:Performance Air Filter and MAF Duct assembly (60mm diameter outlet) consists of our C:Performance oiled cotton air filter and MAF duct, Specifically designed for the Fiesta MK7. This kit is offered as a performance alternative to our Enhanced Intake kits, and will attach to either the OEM Induction hose, Or any Upgrade Silicone Hose (Also available from CEUK) Although recommended to be fitted with one of our Cages, This will work perfectly fine in replacement of your OEM Airbox Suitable for all the following vehicles; Ford Fiesta Mk7 1.0 Ecoboost Air Intake Kit (100PS) (2013 onwards) Ford Fiesta Mk7 1.0 Ecoboost Air Intake Kit (125PS) (2013 onwards) Ford Fiesta Mk7 1.0 Ecoboost Air Intake Kit (140PS) (Black/Red Edition – 2013 onwards) Ford Fiesta Mk7 1.25 Litre Air Intake Kit (60PS) Duratec Petrol (2008 to 2012) Ford Fiesta Mk7 1.25 Litre Air Intake Kit (82PS) Duratec Petrol (2008 onwards) Ford Fiesta Mk7 1.4 Litre Air Intake Kit (96PS) Duratec Petrol (2008 to 2012) Ford Fiesta Mk7 1.5 Litre Air Intake Kit (112PS) Ti-VCT Duratec Petrol (2013 onwards) Ford Fiesta Mk7 1.6 Litre Air Intake Kit (120PS) Ti-VCT Duratec Petrol (2008 to 2012) Ford Fiesta Mk7 1.5 Litre Air Intake Kit (75PS) TDCi Duratorq Diesel (2013 onwards) Ford Fiesta Mk7 1.6 Litre Air Intake Kit (90PS) TDCi Duratorq Diesal (2008 to 2010) Ford Fiesta Mk7 1.6 Litre Air Intake Kit (95PS) TDCi Duratorq Diesel (2010 onwards) Included in the kit: 70mm Cotton Air Filter 60mm Maf Duct Step Up Silicone Hose Ring Jubilee Clip The filter is supplied pre-oiled and ready for installation, and the hose clamp is included.
£108.00 - £118.00
Enhanced Performance Enhanced Performance Maf Duct housing - Fiesta MK7 (None ST)
Enhanced Performance Maf Housing to suit the following Vehicles: MK7.5 Fiesta 1.0 EcoBoost Mk7.5 All Diesel MK7 All Diesel MK7 All petrol NA Engines 60mm Internal Diameter Made from CNC Aluminium with a smooth flow internal design and correct scaling to allow the perfect amount of air to flow into the system as well as take an accurate reading from the MAF. Designed to work With CEUK/Airtec/Forge Stage 2 & 3 intake kits Features iconic EP Logo on exterior of the duct Professionally Anodised Machine finished for a perfect fit every time Raised ends for enhanced hose grip Also available supplied with a Silicone coupler ring to allow the tube to be installed with a 70mm inlet air filter
£60.00 - £65.00
Enhanced Performance Enhanced Pro Filter - CEUK Pro Cotton Filter 70-90mm
"Its so good we put our name on it" Giving you the brand new Enhanced Pro Filter - Made by ProRam exclusively for CEUK (RamAir) The filter itself has a 90mm Inlet, and comes with 4x Reducer Rings allowing it to be installed to an 85mm, 80mm, 75mm and 70mm inlet also! A metal end cap allows for our EP Logo & the iconic CEUK logo to be laser engraved, whilst durable rubber polymer is used at the base to provide strength! Reinforced wire mesh holds this synthetic black cotton piece together with the grab bar featuring the iconic ProRam Logo. The perfect replacement filter for your air intake kit! Neck Inside Diameter (A): 90mm Overall Width (B): 150mm Overall Length: 165mm
£47.35
Airtec AIRTEC Motorsport Induction Kit for 1.0-litre Mk3 Focus Facelift
The new AIRTEC Motorsport induction kit that works perfectly with the standard 1.0L 100ps, 125ps & new 140ps Focus Mk3 EcoBoost Expect to see gains of 5-10bhp compared to the original Airbox. Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. Features. Removes ugly original plastic & restrictive airbox Adds power and torque More responsive and exciting driving experience Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') Free flowing Airfilter & optional k&n dry charger filter cover CNC maf sensor boss with AS engraved logo Powder coated alloy heat-shield with 80mm cold feed pipe which directs air to bottom of filter Adds style to your engine bay Easy fitting, takes less than 15-20 minutes to install Optional Pro Hoses induction hose - Recommended for durability and strength compared to standard hose. Conclusion. It's easy to fit, looks great, sounds even better, doesn't cost the earth and can be put back to standard within 10 minutes (warranty) A simple modification that transforms the look of your engine bay. AS good AS it gets. Comes with 24 month warranty 'conditions apply' PLEASE NOTE: Currently does not fit the PRE-FACELIFT screw type MAF sensor. Only fits FACELIFT push and twist sensor.
£182.27 - £266.75
K&N K&N Air Filter / Induction Kit cleaning Kit
K&N Cleaning Kit Aerosol 99-5000EU K&N Power Kleen works to dissolve the dirt build up and old filter oil, and can be washed away with water. This Recharger Kit comes with a 204 milliliter aerosol spray can of oil and a 355 milliliter K&N pump bottle of Power Kleen air filter cleaner.99-5000EU will restore air flow efficiency and will bring your K&N oiled cotton air filter to like new condition Can be used on both Foam & Cotton / Pleated Labeled in English, Spanish, Swedish, Polish and Czech Restores filter to like new condition Removes road grime, engine exhaust and grease from K&N filters The only cleaner designed specifically for K&N cotton filters
£18.00
Enhanced Performance 70mm Inlet Enhanced Performance Replacement Air Filter
Enhanced Performance Replacement Air Filter, with a 70mm diameter inlet, suitable for all Enhanced Performance intake kits or any other intake with a 70mm inlet filter! Also suitable as a simple upgrade! It is recommended to purchase a maf housing to work with this filter. Suitable for any vehicle with a 70mm inlet The replacement Air Filter is supplied pre-oiled and ready for installation.
£36.00
Enhanced Performance MK8 Fiesta ST - Intake Crossover Pipe - Enhanced Performance
NOW IN STOCK The all new Stage 3 ready Crossover Pipe from our sister company Enhanced Performance is here! Improving performance and offering an aggressive intake sound we have ensured that the maximum amount of airflow is delivered as quickly as possible to where its needed! What's in the Kit? 1x Enhanced Performance Crossover Pipe 1x Turbo to Crossover couple silicone 2x Jubilee Clips Technical Info: Each component has been designed to maximise airflow giving a speedy delivery to the turbo, Our free flowing pipe is 25% larger in internal diameter than the oem counterpart, and removes the bend in the middle section which has been known to create turbulence! Overall a wider smoother route for air to pass giving more power! Will fit with any other brand of silicone / primary hose including RamAir & Pro Alloy
£175.00£150.00
Ford Motor Company MK8 Fiesta Dual Air Feed
As seen on the Fiesta ST - this will fit all models and replaces the single air feed food on the NON st models Genuine Ford Dual Air Feed As Fitted to the New Fiesta ST 1.5T EcoBoost Direct fit to 1.0 Mk8 Ecoboost Fiesta The Fiesta Mk8 1.0 Ecoboost is fitted with a single cold air intake tube and quite restrictive when adding power. This will restrict the amount of air able to be passed to the air filter assembly and subsequently to the engine and turbo lowering any potential power output. The Mk8 ST comes with a very similar setup but with dual feeds which is a direct fit onto the 1.0 increasing that much needed Cold Air Flow. Will not fit standard 1.0 airbox - requires intake kit to be fitted.
£70.00
Enhanced Performance 1.0 EcoBoost Enhanced Performance Stage 2 Kit - MK7 Fiesta
Description #Enhance your MK Fiesta 1 Litre EcoBoost with the Enhanced Performance stage hardware kit Featuring everything needed to take your car from #ZeroToHero you can make your baby boost a true pocket rocket Hoses, Crossover Logo and Intercooler {if selected} logo will all be supplied in the colour you choose on the drop down. Save money by buying the kit together Whats Included 1 x Enhanced Intake Kit 1 x CEUK Primary Induction Hose 1 x CEUK Crossover Pipe 1 x CEUK Secondary Induction Hose 1 x CEUK Turbo Hard Pipe 1 x CEUK Intercooler Hose Kit Optional Extras AirTec Stage 2 Intercooler {Supplied Black with same colour Logo as hoses unless otherwise specified} Milltek Turbo Back Exhaust with Cat and Cat Back Delivery We aim to have all the items with you within 7 working days, in some very rare cases this may take upto a fortnight. Some items may be sent seperately in seperate packages due to size
£730.20 - £2,567.10
Pro Pro Hoses Induction Hose Upgrade for Fiesta Mk8 ST-200
Pro Hoses silicone induction hose for Fiesta MK8 ST-200. Replaces Ford's restrictive plastic intake hose with a smooth, large internal bore silicone hose upgrade for increased air flow and performance. Pro Hoses brings you another world leading quality hose. This induction hose upgrade is available in the following colours: Frozen White Bright Red Gloss Black Bright Blue Pink Yellow Green Grey Orange Nitrous Blue Purple Bring your Fiesta MK8 ST EcoBoost engine bay to life with Pro Hoses, the professional choice. Will fit on the standard airbox, as well as the Airtec Stage 2 Intake Kit
£85.02 - £91.10