The ultimate "CAIS" Fiesta ST MK8 Induction kit is here!! PRE ORDER FOR FEBRUARY DELIVERY If your going to upgrade your Fiesta ST MK8 Air Intake do it properly. All to often we find the cheap induction kits used on the Fiesta ST MK8 is not only sapping power but are not secured and therefore move around under acceleration. In comes the VUDU Fiesta ST MK8 induction kit to take the lime light with its show stopping features found below. KEY FEATURES   Built in and trade market "RAM FEED" Cold Air Elbow Free Flow Cotton pro air filter with *lifetime guarantee* VUDU Etched billet machined securing bracket Heat resistant powder coated heat reduction shield for ultimate heat dissipation Retained rubber bobbins for secure fitment in place of nut and bolt   We specifically designed this fiesta induction kit with our "RAM FEED" cold air elbow to further feed the induction air filter ensuring amazingly low IAT intake air temperature and consistent power figures. Further to this we decided the correct thing to do was manufacture a billet machined bracket to secure the filter in situation and laser etched with our prestigious VUDU logo. Our Sales Director Nick Cook decided the very best way to test this Fiesta ST induction kit was to take the car over to the Nürburgring and push it to its limits. We also where met with extreme heat which made the test even more interesting.     We are confident this Fiesta ST Induction kit not only provides amazing value for money but outstanding performance and aesthetic looks for your MK8 ST couple this with the amazing audible noise from this air intake and its a clear No1 choice.

Read more less

DESCRIPTION What vehicles does this fit? Please note: This will not fit Post 2020 EcoBoost models as there was a change to the shape - please ensure you check the shape VS your own airbox before ordering! This air filter is a direct replacement part. If you’re unsure at all about choosing the correct part for your vehicle, just contact us via the contact form. This PRORAM performance filter has been designed to replace your standard OEM air filter inside your vehicles air box. These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of Motorsport filtration the PRORAM range by Ramair is the premium choice on the market today for your fast road or track car. Key Dimensions Filter Type: Flat Filter Quantity: 1 Filter Shape: Unique Filter Length: 216mm Filter Width: 160mm Filter Depth: N/A Filter Internal Neck Diameter: N/A   Part Number Cross References This part is an equivalent replacement for the following manufacturers part numbers… OEM Part Numbers:  Ford 180530 Ford 2066235 Ford FA1935 Ford GN159601AA Mann Part Numbers: C22031 K&N Part Numbers: 33-3117 Pipercross Part Numbers: PP1998 ITG Part Numbers: WB-285 Other Part Numbers: BMC FM100220   Features  High flow, synthetic nanofiber filtration media Fits in the OEM Airbox and replaces inefficient paper filter Lifetime washable filter Precision injection molded for a perfect fit Guaranteed surface area using high quality custom blended polymer

Read more less

NOW IN STOCK The all new Stage 3 ready Intake kit from our sister company Enhanced Performance is here! Replacing the entire system from the Airbox to the turbo, this kit is designed to maximise power! Improving performance and offering an aggressive intake sound we have ensured that the maximum amount of airflow is delivered as quickly as possible to where its needed! What's in the Kit? 1x Enhanced Performance Crossover Pipe 1x Turbo to Crossover couple silicone 1x Silicone Primary Hose (Blue, Red or black) 1x Enhanced Performance Intake Cage 1x Enhanced Performance Sensor Tube 1x Enhanced Performance Filter (Pro Cotton, Foam or Standard Cotton) 2x Jubilee Clips Technical Info: Each component has been designed to maximise airflow giving a speedy delivery to the turbo, Our free flowing pipe is 25% larger in internal diameter than the oem counterpart, and removes the bend in the middle section which has been known to create turbulence! Overall a wider smoother route for air to pass giving more power!

Read more less

A direct replacement part that offers increases in performance and response, as well as sound and aesthetics, the enlarged induction pipe features a smoother design with less bends to hinder airflow and an increase in overall internal volume to reduce restriction and improve flow to the turbo. TECHNICAL DATA As part of our expanding Fiesta ST Mk8 product range, AIRTEC Motorsport are proud to launch our enlarged induction pipe suitable for track or fast road use. A direct replacement part that offers increases in performance and response, as well as sound and aesthetics, the enlarged induction pipe features a smoother design with less bends to hinder airflow and an increase in overall internal volume to reduce restriction and improve flow to the turbo. Made from high quality aluminium for an improved look and feel, the larger pipe also features an AIRTEC plaque and is available in a powder-coated black finish for a subtle OEM+ look. The kit includes a silicone reducer and connects to the standard air box or to an uprated induction kit, such as our AIRTEC Motorsport kit. The comprehensive installation package includes all fixtures and fittings, and detailed instructions. With valuable performance gains and an improved look to the engine bay, the AIRTEC Motorsport enlarged induction pipe is an essential modification. Specification: Suitable for Fiesta Mk8 ST Direct replacement part Improves air flow to the turbo Made from high quality alloy Powder-coated black finish AIRTEC Motorsport plaque Includes all fixtures and fittings Features detailed fitting guide   AIRTEC Part No: ATMSFO124

Read more less

REVO OEM+ AIR INTAKE SYSTEM FORD FIESTA ST MK8 1.5 ECOBOOST The Revo OEM+ Air Intake System for the 1.5 EcoBoost engine improves performance whilst utilising the stock airbox. Ensuring your engine can get access to enough air is paramount when increasing power; more air means more power throughout the rev-range. Only Revo Air Intake Systems are specifically designed to work in harmony with your vehicle and Revo ECU Software. Engineered to directly replace the restrictive pipework and filter, this kit comes complete with a front silicone hose, aluminium pipe, three-layer foam filter, turbo inlet silicone and fitting kit. KEY FEATURES Increased Performance Improved Air Flow Efficiency Increased diameter crossover Three Stage Foam Filter Utilises stock airbox   OEM VS REVO When you begin to enhance performance, the restrictive OEM intake struggles to flow enough air, robbing the engine of power. The Revo Air Intake System removes these restrictive elements promoting smoother airflow. OEM+ systems replace any restrictive components with parts precisely engineered to reduce turbulence and improve airflow. Revo Flush Fit silicone hoses avoid unwanted turbulence at joins and increase the rate at which air can flow ensuring maximum performance at any level of tuning. CROSS OVER PIPE The Revo engineering team knew that to create the most effective kit, every component had to be considered to maximise and smooth airspeed. The system is designed around the aluminium cross over pipe, mandrel-bent to maintain the internal diameter in the corner and to remove the restrictions found in the OEM pipe. The direct routing and increased diameter pipe offer superior flow and deliver more air to the turbocharger over a shorter period.   SILICONE HOSES The plastic hoses on the stock system are designed with a corrugated style to flex with the engine movement, while this has its place it also causes a large amount of turbulence as the airflow doesn’t have a smooth direct path to the turbo. We designed the silicone hoses with stepped internals to ensure a flush fit and to minimise turbulence while still allowing for engine movement.   AIR FILTER The standard paper filter found in most vehicles performs well under normal conditions, however, with the increased power it becomes a major choking point in the system. Revo filters work by trapping dirt particles within each of the oiled foam layers while allowing air to negotiate its way through, reducing restriction and offering much longer service intervals. The new Revo filter features a direct replacement three-layer foam filter,   MOUNTING BRACKET AND FITTING KIT The Revo kits come complete with a full fitting kit that allows for easy installation. Included is a fully machined crossover bracket which increases the strength of this fixture point and alleviates any possibility of bracket failure from engine movement.     RESEARCH AND DEVELOPMENT All Revo products are designed in-house and are rigorously tested utilising an in-house 3D printer, latest CAD and CFD programs, hub dyno and Revo data acquisition software. The Revo intake allows the turbo to run more efficiently, intake a larger volume of air and minimise turbulence to increase both power and torque, as highlighted during controlled dyno testing. The Revo Fiesta Mk8 OEM+ air intake system was tested in-house to compare the performance against that of the Ford OEM intake. First tested on a vehicle running the OEM intake with Revo Stage 1 software, Revo Intercooler and a Milltek GPF back exhaust, the Revo intake was then installed and tested in the same controlled environment to highlight the benefits of enhanced cooling. PERFORMANCE DATA The results show improvement throughout the whole rev range, but especially towards the top end of the rev range. The Revo intake offering an average gain of +4WHP, and +6NM torque over the stock part. Increased airflow also delivers impressive peak performance gains of +11WHP @6100rpm and +13NM @6100RPM over the stock intake system. AIRFLOW More air, less restriction. The Revo system was tested on a flow bench to highlight the efficiency of the kit in allowing more air to reach the turbo, quickly and with less restriction. The OEM system reached its maximum potential of 490 cubic feet per minute with a restriction of 1082 mmWg, compared to the Revo system which was able to flow 570 CFM with a restriction of only 1029 mmWg. This difference allows the engine to still make power at the top of the rev limit, whilst also highlighting the efficiency and less restriction at the lower end, resulting in smoother and increased throttle response.     FITMENT VEHICLE APPLICATIONS Manufacturer Model Engine Year Ford Fiesta ST 1.5 EcoBoost 2018 onwards DOCUMENTS The following documents are available to view: FITTING INSTRUCTIONS Download the Revo Ford Fiesta MK8 ST OEM+ Intake System Instructions NOTES Simple replacement of the OEM part Stock airbox not included

Read more less

The FMINDK38 is the cold air induction system for Ford’s latest generation 1.5-liter 3-cylinder ST engine. Like with all manufacturers in recent times the need to make smaller engines more efficient and more powerful has been an engineer’s top priority, this then creates a problem for the aftermarket manufacturers to improve what is already fitted to the vehicle, nevertheless this hasn’t stopped us at Forge Motorsport. A large amount of knowledge and knowhow from past development with all Ford models was available to us, however this is a totally new power unit and we needed to spend an extensive amount of testing time to ensure we ended up with a product that gives genuine improvements over the standard air box.    The choice of filter was decided after weeks of real-world testing and hours on the dyno experimenting with different filter options. We found that our Forge pleated filter worked best with an increase in power and torque while maintaining the best filtration properties, the build quality of the filter is superb and carries a limited lifetime warranty. This performance filter has been designed with a high quality silicone coupling and W2 Stainless Steel hose clamps to join the anodized black machined billet velocity stack. The filter is made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. The use of the velocity stack MAF sensor housing maximises as much smooth air flow as possible. Our skilled CAD engineers have simulated different MAF sensor housing models to create the best design for this kit. The illustrations below demonstrate the benefit of using velocity stack science and show the smoothed air flow into the MAF sensor housing and inlet tract from the air filter. With the combination of both the filter and MAF sensor housing we saw total gains of 4bhp however this only tells half the story, if you study the data from the dyno graph you can see the increase in torque from 1500-3000 RPM and again at 4500 until the red line, in fact at 2200 RPM gains of 20NM are achieved. This is also the same with the BHP power figures, you are seeing gains sooner and at the latter stages of the rev range, making the engine perform stronger when you need it to.  On a tuned vehicle this combination is an essential purchase as the OEM air box is found to be too restrictive to achieve the optimum power figures and smooth power delivery. As a bi-product from FMINDK38 the acoustics from the 1.5 engine have been improved, there is now a purposeful induction roar under hard acceleration and a very addictive turbo flutter when you lift off the throttle. Not only to improve the aesthetics but to aid as a heat defence from the hot engine, we have provided a laser cut and powder coated aluminium shield, this surrounds the filter and incorporates the OEM air ducting to direct cold air to the intake. This kit can be installed to the OEM intake pipe or can be paired with our own silicone intake pipe FMINLH21, the key here is to further smooth the airflow to the turbo and eliminate any metal pipework as this is susceptible to greater heat soak and a potential loss in power.   A commonly asked question is will this fit any other aftermarket or the inlet hose intake? The answer is yes it will fit other manufacturers inlet hoses and fits to the original Ford inlet hose.  MAF Boss Manufactured from 6082 aerospace grade aluminium. Black anodised & powder coating for ultimate protection and durability.   Forge Pleated performance air filter which has been designed with a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. No engine management lights (EML) Increased air flow   Limited Lifetime warranty  

Read more less

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle. Guaranteed to increase horsepower and torque Roto-molded HDPE intake tube paired with oversized oiled cotton air filter Engineered to provide high airflow and exceptional filtration Replaces factory air filter and intake tube Filter only requires cleaning every 100,000 miles under normal highway driving conditions Typical installation can be completed in 90 minutes or less with simple hand tools 10-Year/Million Mile Limited Warranty™ Will not void vehicle warranty SPECIFICATIONS Estimated Horsepower Gain 18.7 HP @ 2050 RPM Replacement Filter 33-3117 Air Filter Color Red Air Filter Material Cotton Gauze Air Filter Outlet Shape Round Clamps Included 2 Clamp Material Stainless Steel Clamp Style Regular Couplers Included 2 Type Gen I Product Style 57i Series International Kits Intake Pipe Color / Finish Black Intake Pipe Material High-Density Cross-Linked Polyethylene Street Legal In All US States No TUV Approved (Europe) No Weight 2.7 lb (1.2 kg) Product Box Height 9.25 in (235 mm) Product Box Length 15.13 in (384 mm) Product Box Width 9.13 in (232 mm) California Restricted Not legal for sale or use in California Mounting Hardware Included Yes Warranty 1,000,000 Miles/10 Year

Read more less

As part of our expanding Fiesta Mk8 platform product range, AIRTEC Motorsport is proud to launch our intake kit for the 2020 onwards 1.0-litre and ST-Line suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s original air intake system to allow more flow whilst maintaining low intake temperatures, improving response, as well as sound and aesthetics within the engine bay. Having previously designed a number of shielded induction kits for other performance models, we were keen to develop an extensive intake package for the 2020 onwards 1.0 EcoBoost model to offer significant improvements. Featuring a free-flowing cotton air filter, laser cut shield and accompanying aluminium intake pipe with billet MAF housing, our kit is a direct replacement for the restrictive OEM air box set up. To ensure the new air filter does not suffer with heat soak issues from the confines of the engine bay, the shield provides a barrier from the heat of the engine and is fed cold air from the original front intake. There is also the option to add a Pro Hoses silicone intake pipe, which replaces the flexible OEM item with a less restrictive, freer flowing hose that’s available in three colours to improve the look of the engine bay. The result is increased power, improved throttle response, heightened induction noise and a more pleasing look to the engine bay. The kit requires no additional drilling or cutting to fit and comes complete with all the correct fixtures and fittings, as well as detailed instructions. Please note: This kit is designed to fit the 2020-onwards 1.0 EcoBoost model with the turbo at the rear. The pre 2020 model has the turbo at the front – see here: induction kit for Fiesta MK8 ST-Line front turbo  Please ensure correct fitment before ordering.  Features: Comprehensive induction kit designed specially for the 2020 onwards Mk8 1.0 EcoBoost platform Large cotton air filter for improved flow and increased performance Laser cut shield helps to ensure lower intake temperatures Optional Pro Hoses intake hose to further improve flow Improved soundtrack and under bonnet aesthetics Long-lasting, high-quality black powder coat finish Includes all fixtures and fittings AIRTEC Part No: ATIKFO35

Read more less

This tube is designed to be a part of the intake system, generally placed between the Air Filter and primary hose when replacing the Airbox for an Open Air intake kit Measuring 70mm externally from edge to edge and housing the twist type sensors found on post 2015 fords. Pipe is fully black with engraved EP Logo, Featuring Bracket and black screw to secure sensor. Designed to fit with an air filter using a 70mm Inlet Confirmed Fitment: Ford Fiesta MK8 & MK8.5 2018 > Ford Puma ST MK2 2019 > Ford Focus MK4 All Petrol Models 2018 > May fit others.

Read more less

ITG Air Filter for the Ford Fiesta ST Mk8 Please note: This will not fit Post 2020 EcoBoost models as there was a change to the shape - please ensure you check the shape VS your own airbox before ordering! The ITG Air Filter has been expertly designed in-house by ITG themselves to guarantee you the signature high quality that you'd expect from an ITG system.  Measuring from 161 to 217mm, the Mk8 Ford Fiesta ST Air Filter improves the air flow passing through the standard airbox on the Mk8 Ford Fiesta ST 1.5 EcoBoost (2018-) model. ITG Air Filters Part number: WB285 ITG produce a wide range of air filter systems for a number of make and models, if you're in need of that little extra power or you're just after a superior filter in general to reduce the amount of dust, then the ITG Performance Air Filter is the filter for you. Need to Learn More? Please contact a member of our Mk8 Fiesta ST tuning experts at AET Motorsport for any additional details you require regarding the ITG Air Filter. Our team will be more than happy to help with any questions that you may have regarding the product. Call or Email to discuss: Tel: 01924 228042 | Email: info@aetmotorsport.com

Read more less

As part of our expanding Mk8 Fiesta platform product range, AIRTEC Motorsport is proud to launch enclosed intake kit for the ST model, suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s original air intake system to allow more flow whilst maintaining low intake temperatures, improving response, as well as sound and aesthetics within the engine bay. AIRTEC Part No: ATIKFO34 TECHNICAL DATA As part of our expanding Mk8 Fiesta platform product range, AIRTEC Motorsport is proud to launch our enclosed intake kit for the ST model, suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s original air intake system to allow more flow whilst maintaining low intake temperatures, improving response, as well as sound and aesthetics within the engine bay. Having previously designed a number of enclosed induction kits for other performance models, we were keen to develop an extensive intake package for the Mk8 Fiesta ST to offer significant improvements. Featuring a large, free-flowing cotton air filter housed inside a three-piece enclosure, the comprehensive kit also includes a replacement aluminium intake pipe. To ensure the new air filter does not suffer with heat soak issues from the confines of the engine bay, the laser cut heat shields provide a barrier from the heat of the engine and is fed cold air from the original front intake. The result is increased power, improved throttle response, heightened induction noise and a more pleasing look to the engine bay. The kit is a direct replacement that requires no additional drilling or cutting to fit, and comes complete with all the correct fixtures and fittings, as well as detailed instruction Optional Secondary Cold Air Feed: To increase the volume of cold air directed towards the air box, there is also an optional cold air feed inlet, which fits in place to the underside of the new air box. This can be used to provide a second constant flow of fresh air from the front grille area of the car to the air box, or if the car is fitted with an AIRTEC Motorsport Stage 3 intercooler, you can purchase the designated side air duct to connect the feed to – Stage 3 Intercooler Cold Air Feed.   Features: Comprehensive induction kit designed specially for the Mk8 Fiesta ST platform Large cotton air filter for improved flow and increased performance Laser cut enclosed shields help to ensure lower intake temperatures Front intake directs constant feed of cold air to the filter Optional secondary cold air feed Improved soundtrack and under bonnet aesthetics Long lasting, high quality black powder coat finish Includes all fixtures and fittings AIRTEC Part No: ATIKFO34

Read more less

ITG Air Filter to suit Ford Fiesta Mk 8 ST 1.5 EcoBoost & 1.0 EcoBoost from 04/2018 onwards. mk2 puma st ITG Air Filter Code WB280 measures 161 x 217mm Please note: This will not fit Post 2020 EcoBoost models as there was a change to the shape - please ensure you check the shape VS your own airbox before ordering!

Read more less