15% OFF ALL ELIGIBLE ITEMS IN OUR EASTER SALE - USE DISCOUNT CODE "EASTER24" AT CHECKOUT. VALID UNTIL 23:59 1ST APRIL.

DISCOUNTED ITEMS

14794 products

  • Sale -32% AIRTEC INTERCOOLER UPGRADE FOR MONDEO MK3 2.0/2.2 TURBO DIESEL - Car Enhancements UK

    Airtec AIRTEC INTERCOOLER UPGRADE FOR MONDEO MK3 2.0/2.2 TURBO DIESEL

    Airtec Mondeo Mk3 2.0/2.2 Turbo Diesel front mount Intercooler (comes with full brackets and fittings included) Airtec’s latest creation is this intercooler for the Mondeo 2.0 & 2.2 Turbo diesels, they have now changed the total design with new high flow 60mm core and Angled flow end tanks, which in turn has increased power, torque & also lowered ATC Temps, Yes its really that good.BHP & Torque gains on Standard car fitted with Airtec Intercooler upgrade, Rolling road carried out @ AMD.  (Gains. 5.2 bhp increase & we saw the torque rise by a massive 31.5 lb/ft , this figure will be easily doubled when fitted to a remapped Mondeo.)Test results from Street Performance’s Modified Mondeo Diesel.  Mods on car are : -Free Flow exhaust & decat -Pipercross panelfilter -Massive Airtec Intercooler upgrade -Custom map up to 3.3k rpmStreet Performance’s Modified Mondeo made 208bhp & 441 lbft of torque! with the above mods.Quotes by David @ Street Performance  Figures are very good, even without map it does 173hp instead of 155hp.With mapping we saw the power rise up to 208hp. We did limit the car’s torque for more pull tru revs & as smooth power curve as possible (but will be raised 10-20Nm after some more fiddling with the map! along with 220+hp to make ST220/ ST225 owners jealous, with same or better performance with 40-50MPG   They also tested 2 cars to see what the Intake Air charge tempertures were under load, a Complete standard car and street performance’s modified Mondeo, Both cars tested with 8 degrees Ambient  Air temps,  Results – Completely Standard car under load, the Intake tempertures kept rising up to 55-60° and above! Fully tuned car with the Airtec Intercooler fitted and the Intake temps never went higher then 15°, so IC works very well and gives much less stress on engine. Approximate Dimensions: Height 350mm Width 685mmThickness 60mm AIRTEC part no: ATINTFO14

    £477.52£324.14

  • AIRTEC TWIN-SPEC INTERCOOLER UPGRADE FOR GOLF GTI MK5/6 2.0 TFSI - Car Enhancements UK

    Airtec AIRTEC TWIN-SPEC INTERCOOLER UPGRADE FOR GOLF GTI MK5/6 2.0 TFSI

    At AIRTEC we always test our Intercoolers & Radiators to ensure maximum gains from design & core choice. Testing carried @ Devil Developments ‘Stage 1 map Devil 245’ With the Standard Intercooler fitted & Stage 1 re-map we saw power of 246.9bhp & Intake temps (Turbo charged Air Entering the Engine) of 49 degrees, 49 degrees is o.k. but this Golf only had a stg1 re-map! these temps will rise with higher stages of tune, this will mean you will start to lose power. AIRTEC TwinSpec + Standard Intercooler fitted & as before fitted with Stage1 re-map, Power was up to 261bhp! & Intake temps were as Low as 17 degrees with a peak of 21 degrees, the TwinSpec set up clearly works and easily installed under 2 hours. Fits Following models. VW Golf MK5 GTi 2.0 TFSIVW Golf MK5 GTi Edition 30 2.0 TFSI AIRTEC TwinSpec Intercooler Included parts & Features 1 x 70mm core Intercooler with shaped end tanks 2 x Twinspec 5ply silicon hose’s with stainless Jubilee clips 3 x Billet alloy machined push fittings 2 x AIRTEC logo Horn relocation brackets Fitting Instructions and all required fixings Un-Beatable value for money Proven Power Increase’s for Fast Road & Track Can Be used Inconjuction with AIRTEC OEM Intercooler upgrade for even more cooling power! Available in Pro-Series Satin Black Airtec 3 year unlimited mileage warranty NOW ONLY AVAILABLE WITH BLACK HOSES Hose colour shown for illustration purposes only Registered Design Right number: 6023454 AIRTEC part no: ATINTVAG2

    £540.90

  • Sale -42% AIRTEC INTERCOOLER UPGRADE FOR 1.9 DIESEL RENAULT TRAFIC VAN - Car Enhancements UK

    Airtec AIRTEC INTERCOOLER UPGRADE FOR 1.9 DIESEL RENAULT TRAFIC VAN

    AIRTEC are proud to introduce the front mount intercooler upgrade for the Renault Trafic van.Designed to fit the 2001-2007 1.9 diesel model, this freer-flowing intercooler is a direct replacement for the smaller and more restrictive OEM set up.Featuring an 80mm core design together with cast end tanks, the AIRTEC intercooler offers much greater surface area, efficiency and volume over standard. Despite this improvement, it fits neatly behind the original grille, requires no trimming or cutting and can be used with the original hoses.The comprehensive fitting kit includes all the correct fixtures and fittings, step-by-step instructions with pictures and should take around 1-2 hours to complete.The intercooler is available in a choice of of either Natural Silver or Pro-Series Black finishes, with or without the AIRTEC logo.Features: Designed and manufactured in the UK by AIRTECAIRTEC logo’d cast end tanks for improved airflow and unbeatable strengthProven reduction in charge temps3-year unlimited mileage warrantyAvailable in either Pro-Series Black finishesAIRTEC logo available at no extra chargeUnbeatable value for money! Approximate Dimensions:Width: 540mm  Height: 185mm Depth: 80mmIntercooler Volume Capacity (The amount of charged air that the intercooler can hold)Standard: 1.57-litresAIRTEC: 3.55-litresJust over twice the capacity of standard!Also fits the following:Vauxhall VivaroNissam PrimastarAIRTEC part no: ATINTREN6

    £477.52£275.57

  • Sale -25% AIRTEC INTERCOOLER UPGRADE FOR FIAT PUNTO ABARTH - Car Enhancements UK

    Airtec AIRTEC INTERCOOLER UPGRADE FOR FIAT PUNTO ABARTH

    AIRTEC front mount intercooler for the Fiat Punto Abarth. Great addition to any standard or remapped Puntos. Replaces original restrictive 50mm core intercooler for AIRTEC’s high flow 60mm core intercooler Airtec Intercooler dimensions: Height – 205mm Width – 820mm Thick – 65mm Registered Design Right number: 6022629 AIRTEC part number: ATINTFT2

    £477.52£358.58

  • Sale -11% AIRTEC INTERCOOLER UPGRADE FOR MK6 FIESTA 1.6 TDCI - Car Enhancements UK

    Airtec AIRTEC INTERCOOLER UPGRADE FOR MK6 FIESTA 1.6 TDCI

    AIRTEC front mount intercooler upgrade for the Mk6 Fiesta 1.6 diesel TDCi Designed to fit all 1.6 diesel models. PLEASE NOTE: This intercooler kit will require trimming to the bumper and radiator cradle Featuring a 60mm core design together with high-flow cast end tanks, the AIRTEC intercooler offers much greater surface area, efficiency and volume over standard. Despite this improvement, it fits behind the original bumper but does require trimming and cutting to fit! The comprehensive fitting kit includes all the correct fixtures and fittings, step-by-step instructions with pictures and should take approximately 2.5 hours to complete. The intercooler is available in Pro-Series Black finish and with or without the AIRTEC logo. Features: Designed and manufactured in the UK by AIRTEC AIRTEC logo’d cast end tanks for improved airflow and unbeatable strength Proven reduction in charge temps 3-year unlimited mileage warranty Available in Pro-Series Black finish AIRTEC logo available at no extra charge Unbeatable value for money! Hose colour shown for illustraion purposes only AIRTEC part no: ATINTFO45

    £477.52£424.21

  • Sale -54% AIRTEC 60MM CORE HALF-SIZE INTERCOOLER UPGRADE FOR ESCORT RS TURBO S1 - Car Enhancements UK

    Airtec AIRTEC 60MM CORE HALF-SIZE INTERCOOLER UPGRADE FOR ESCORT RS TURBO S1

    AIRTEC half-size front mount intercooler upgrade for the Escort RS Turbo S1 Features: 60mm AIRTEC spec core Requires no cutting or filling Works with original fan assembly or option to upgrade to an Italian 11″ fan Adjustable alloy side bracket for easy fitting Half the size of the front mount S1 intercooler however it has been made with a 60mm core instead of the 50mm core that is used on the full front mount intercooler to aid in its cooling properties Can be seen though the front grill when fitted and looks great, easily the best looking intercooler upgrade available for S1. Approximate dimensions: Width 290mm Thickness 50mm Height 300mm Available in Pro-Series Black or Natural Silver AIRTEC part no: ATINTFO15

    £477.52£220.10

  • AIRTEC INTERCOOLER UPGRADE FOR HONDA CIVIC TYPE R FK2 – WITH BIG BOOST PIPE KIT - Car Enhancements UK

    Airtec AIRTEC INTERCOOLER UPGRADE FOR HONDA CIVIC TYPE R FK2 – WITH BIG BOOST PIPE KIT

    AIRTEC front mount intercooler upgrade for the Honda Civic Type R FK2. Designed to fit all 2015-2017 Honda Civic Type R models, this freer flowing front mount intercooler set up is a direct replacement for the much smaller, and more restrictive, OEM set up. Dyno proven back-to-back testing showed a huge reduction in charge temps over standard (see below). Despite its much greater surface area and volume, the AIRTEC intercooler upgrade fits neatly behind the original front bumper and requires no additional drilling or cutting. The comprehensive fitting kit includes silicone hose connectors for an easy fit, all the correct fixings, full instructions and larger diameter boost hoses. Features: 60mm to 100mm two-step core design Cast free flowing end tanks Alloy air scoop to help direct air through the core Direct fit, minor trimming needed to under tray Hand crafted big boost pipes Available in a choice of either natural silver or pro series black finishes, with or without the AIRTEC logo. Test results taken at AmD Rolling Road showing charge temps before and after the OEM intercooler and the AIRTEC upgrade. (Tested on Dream Automotive’s FK2 demo car ) Run 1 OEM intercoolerIN – 131  OUT – 60 AIRTEC intercooler IN – 117  OUT – 16 Run 2 OEM intercoolerIN – 134   OUT – 62 AIRTEC intercoolerIN – 107  OUT – 17 Run 3 OEM intercooler IN – 132  OUT – 58 AIRTEC intercooler IN – 120  OUT – 18 Registered Design Right number: 6022632 Height 370mm Core thickness 60mm / 100mm (Stepped design) Width approx. 1000mm (Including end tanks) Outlet size 63mm AIRTEC part number: ATINTHON02

    £809.18

  • Sale -32% AIRTEC INTERCOOLER UPGRADE FOR ALFA ROMEO MITO 1.4 - Car Enhancements UK

    Airtec AIRTEC INTERCOOLER UPGRADE FOR ALFA ROMEO MITO 1.4

    AIRTEC front mount replacement intercooler for the Alfa Romeo Mito Great addition to any standard or remapped Mito Replaces the restrictive standard intercooler for the AIRTEC high-flow 60mm core intercooler. 60mm thick proven bar and plate core, spec’d to AIRTEC designs AIRTEC logo’d cast end tanks for improved airflow and unbeatable strength Proven reduction in charge temperatures 3-year unlimited mileage warranty Available in Pro-Series Black finishes AIRTEC logo available at no extra charge Unbeatable value for money! Approximate Dimensions: Height – 205mm Width – 820mm Thickness – 65mm Registered Design Right number: 6022629 AIRTEC part no: ATINTALFA1

    £477.52£325.24

  • AIRTEC MOTORSPORT INTERCOOLER UPGRADE FOR GOLF MK5 GT 1.4 TSI - Car Enhancements UK

    Airtec AIRTEC MOTORSPORT INTERCOOLER UPGRADE FOR GOLF MK5 GT 1.4 TSI

    After much research, development and testing at AIRTEC HQ, our intercooler upgrade for the VW Golf GT Mk5 1.4 TSI has been added to our ever-growing range of products. Built using a high flow core to offer increased cooling efficiency and performance, we take pride ensuring all of our kits are finished to our usual high standard and premium quality. Designed in the UK and offered at a reasonable price. Great addition to any standard or re-mapped Golf. AIRTEC Front mount Intercooler kit Includes these parts & Features 1 x Huge 60mm core Intercooler with flowed cast end tanks, this means less welding and a stronger Intercooler. High quality  silicon hoses which means better flow inside the pipe work, finished stainless Jubilee clips. Retains original crash bar Retains original fog lights No cutting to bumper If running Golf GTI fog surrounds, no cutting is required Fitting Instructions and all required fixings Proven power increase for Fast Road & Track builds Available in Pro-Series Black or Natural Silver AIRTEC 3 year unlimited mileage warranty Fitting will take 2-4 hours depending on mechanical skill Fits all MK5 1.4 Twin Charge TSi Petrol models Please note: If running Golf GTI fog surrounds, no cutting is required Approximate Dimensions Width – 740mm Height – 170mm Thick – 70mm Registered Design Right number: 6023454 AIRTEC part no: ATINTVAG24

    £480.13

  • AIRTEC INTERCOOLER UPGRADE FOR BMW 135I/335I/Z4 35I (N54) - Car Enhancements UK

    Airtec AIRTEC INTERCOOLER UPGRADE FOR BMW 135I/335I/Z4 35I (N54)

    AIRTEC intercooler for the E82 BMW 135i, E92 335i and E89 Z4 35i (N54) 60mm thick proven bar and plate core, spec’d to AIRTEC designs AIRTEC logo’d cast end tanks for improved airflow and unbeatable stength Dyno proven power gains Lower intake temps meaning a safer engine 3-year unlimited mileage warranty Available in either Natural Silver or Pro Series Black finishes AIRTEC logo available at no extra charge Unbeatable value for money! Test results Carried out at AmD Essex rolling road. Intercoolers being testing for ACT (Air Charge Temperature) Standard BMW Intercooler (Stage 1 remap). Average air temperature into intercooler: 115 degreesAverage air temp out of intercooler: 69 degrees With intake temps over 60 degrees it is likely that the engine will be pulling back the power AIRTEC Intercooler (Stage 1 remap) Average air temp into Intercooler. 84 degreesAverage air temp out of Intercooler. 36 degrees With lower intake temperatures our AIRTEC intercooler was seeing an increase in power of 17 bhp The increase in power proves just how important it is to have lower intake temperatures and why our AIRTEC intercooler is a must have for any remapped cars Registered Design Right number: 6023245 AIRTEC part no: ATINTBMW2

    £601.68

  • Sale -7% AIRTEC MOTORSPORT 50MM CORE INTERCOOLER UPGRADE FOR MITSUBISHI COLT CZT - Car Enhancements UK

    Airtec AIRTEC MOTORSPORT 50MM CORE INTERCOOLER UPGRADE FOR MITSUBISHI COLT CZT

    As part of our expanding Mitsubishi product range, AIRTEC Motorsport is proud to launch our intercooler upgrade suitable for track or fast road use. In order to ensure there is no noticeable loss in performance during extended periods of hard driving, we have developed a larger, freer-flowing intercooler that is a direct replacement for the smaller and more restrictive OEM item. Our solution to increasing the intercooler’s size and performance within the confines of the limited space behind the bumper and crash bar is based upon a 50mm twin pass core. This offers a massive  increase in overall capacity in comparison to the original intercooler, as well as a significant increase in frontal area over standard, which allows it to make the most of the air flow provided. Together with our high-flow end tanks to ensure flow is directed correctly and efficiently, the AIRTEC Motorsport intercooler offers much greater efficiency and volume over standard. The comprehensive kit includes silicone connectors and all fixtures and fittings. DYNO TESTEDStock IntercoolerIAT at air filter: 30-32*cRelative Humidity: 41%Barometric Pressure: 1,012mBar Run 1  In: 142*cOut: 68*cRun 2 In: 145*cOut: 65*cRun 3  In: 143*cOut: 66*c Max pressure drop: 0.65psi AIRTEC Motorsport IntercoolerIAT at air filter: 31-34*cRelative Humidity: 38%Barometric Pressure: 1,011mBar Run 1  In: 136*cOut: 39*cRun 2  In: 138*cOut: 41*cRun 3In: 135*cOut: 38*c Max pressure drop 1.91psi Features: Huge 50mm core Flowed end tanks High quality silicone hoses and stainless-steel jubilee clips Retains original crash bar No cutting to bumper Fitting Instructions and all required fixings Proven power increase for fast road & track Available in Pro-Series Black or Natural Silver AIRTEC 3-year unlimited mileage warranty Fitting will take 2-4 hours depending on mechanical skill Fits Mitsubishi Colt CZT Registered Design Right number: 6022641 AIRTEC Part No: ATINTMITS01

    £477.52£445.67

  • AIRTEC INTERCOOLER UPGRADE FOR VAUXHALL ADAM 1.4 TURBO - Car Enhancements UK

    Airtec AIRTEC INTERCOOLER UPGRADE FOR VAUXHALL ADAM 1.4 TURBO

    AIRTEC front mount intercooler for Vauxhall Adam 1.4T Designed to work with re-mapped ECU for best results Finished in Pro-Series Satin Black with a choice of silicone hose colours Removes restrictive OE Vauxhall intercooler, which suffers from heat soak on tuned cars. AIRTEC Front mount Intercooler kit Includes these parts & Features 1 x Huge 80mm core Intercooler with flowed cast end tanks, this means less welding and a stronger Intercooler ‘same a VXR design’ High quality 4/5ply silicon hose’s with alloy joiners & stainless Jubilee clips Fitting Instructions and all required fixings Un-Beatable value for money Proven Power Increase’s for Fast Road & Track Available in Pro-Series Satin Black Airtec 3 year unlimited mileage warranty Fitting will take 2-3 hours depending on mechanical skill Registered Design Right number: 6023243 AIRTEC part no: ATINTVAUX11

    £540.90

Login

Forgot your password?

Don't have an account yet?
Create account