Scorpion Exhaust GPF Back system for the MK2 Puma ST
Available with a Rear Silencer (None Res Option) or as a silencer delete (Predator)
This system is a GPF Back and requires the original system to be cut!
Fitment Years: 2020 - 2024
Model: Puma ST
Fits To: OEM / Scorpion
Pipe Diameter: 70mm/2.75"
This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only.
Fitment
Audi S3 8V 2.0 TFSI 2013-2020 models
Suitable for both GPF and Non-GPF models
Description
Direnza Performance Decat Pipe, manufactured from T304 grade, brushed stainless steel. Handcrafted by our specialist engineering team to ensure high quality & accurate fitment.
A direct replacement for the stock part, Direnza mandrel-bent exhaust components are fully TIG welded and feature CNC-machined flanges for strength and an accurate, secure fit every time.
Engineered to not only improve power and torque across the entire RPM range but Direnza exhaust components improve throttle response to help you push further and faster on the road or the track.
Free flowing 3.5″ bore straight through to optimise exhaust flow until the cat back part of the system.
Weight
9 kg
Product Category
Exhaust Decat
Exhaust Decat - Length (mm)
650
Exhaust Decat - Pipe Bore (mm)
88.9-76.2-65
Sensor Ports
4
This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only.
Removes the oem GPF
This part requires the original system to be cut and is for off road use only
Fitment Years: 2019 - 2025
Model: Supra A90 3.0T GPF Models Only
Fits To: OEM / Scorpion
Pipe Diameter: 76mm/3"
GPF Delete:
What are the benefits of a GPF delete? This additional pipework removes the highly restrictive Gasoline Particulate Filter, which otherwise significantly muffles the exhaust tone, creates excessive back pressure, and limits tuning potential. Removing the GPF typically results in a louder, more aggressive exhaust note and significantly improved tunability. (For motorsport use only.)
FITS:
Supra A90 3.0T GPF Models Only
KEY FACTS
Fitment Years: 2019 - 2025
Model: Supra A90 3.0T GPF Models Only
Fits To: OEM
Exhaust Cutout Cover:
The finishing touch for your Supra build, if you are running a single exit exhaust, is to cover up the gaping hole that no longer serves a purpose. Our cutout cover gives your rear end a much-needed tidy look.
The cover easily installs with pre-applied tape and push clips to the diffuser, requiring no holes to be drilled in your vehicle! (If purchasing the 80mm/3.15” single exit cat-back system, this component is already included and does not need to be purchased separately.)
FITS:
Supra A90 3.0T GPF Models Only
KEY FACTS
Fitment Years: 2019 - 2025
Model: Supra A90 3.0T GPF Models Only
Fits To: OEM / Scorpion
Pipe Diameter: 70mm/2.75"
GPF-Back System:
Our expert technicians have developed a 70mm/2.75” GPF-back system with dual 115mm tailpipes, specifically for the Supra A90 3.0T GPF model. Explore the full specification breakdown and available options below!
This exhaust is non-resonated, meaning it comes without a centre silencer. Removing the original silencer results in a louder sound.
Does our system retain valve functionality? Yes! Drivers can continue to control the car's soundtrack via the mode select button inside the car. This allows the ECU to modulate the sound levels emitted from your Scorpion exhaust.
Once installed, the acoustically tuned silencers — featuring specialised, unique internals (on systems equipped with mid-silencers or backboxes) — and precision CNC mandrel-bent pipework enable the exhaust system to expel engine gases more efficiently. This results in enhanced power delivery, sharper throttle response, and reduced curb weight, thanks to the full stainless-steel construction. Designed for durability, our system offers exceptional longevity, even in the harshest conditions.
Tailpipe Styles:
Ascari: Our premium sport option, available exclusively in a matte carbon finish, highlights the distinctive sporty carbon weave. Its two-piece floating construction, with an inner brushed stainless-steel insert, allows hot gases to pass through without discolouring or weakening the outer carbon fibre shell.
Daytona: This design needs no introduction, the classic Scorpion Daytona slash-cut style with a modern twist on a timeless look. The Daytona is a great-looking option for everything from hot hatchbacks to flagship autobahn saloons.
STW: Put on your leather driving gloves as we embrace motorsport heritage with the classic STW straight-cut trim. Tried and tested, the straight-cut look delivers raw, unfiltered aesthetics, harkening back to a golden era of motoring.
Tailpipe Finishes:
Polished: Premium T304 stainless steel polished trims undergo a meticulous multi-step buffing process, resulting in a long-lasting, mirror-like finish that stays shining. (Available for Daytona / STW trims only.)
Black Ceramic: The matte black finish provides a stealthy, modern look. The tailpipes undergo a specialised coating process, ensuring a durable and flawless finish. (Available for Daytona trim only.)
Single Exit Cat-Back System:
Bring back the golden era of 90s tuning with our fourth-generation Supra-inspired 80mm/3.15” single exit cat-back system.
This full firepower option removes the restrictive GPF filter, which otherwise muffles the exhaust tone, creates intensive back-pressure, and limits tuning potential (for motorsport use only).
The large-diameter single pipework provides improved turbo spooling and that unmistakable JDM sound. Once installed, the freer-flowing single exit system overall improves the vehicle's power delivery and sharpens throttle response while also reducing overall weight.
Further channelling the 90s street tuner energy, the crowning jewel for your Supra is our high-flow angled “Jap” style silencer with a 100mm straight-cut polished tip.
We also offer the finishing touch for your Supra build with our exhaust cutout cover set. This covers the gaping hole that no longer serves a purpose. The cover installs easily with pre-applied tape and push clips, requiring no drilling into your vehicle!
Scorpion's meticulous attention to detail and superior engineering skills put them at the very top in terms of construction quality and reliability. But the real difference is the way a Scorpion feels. No other exhaust feels like a Scorpion because no other exhaust is created with our passion and that's one thing which can never be copied. Scorpion's hand built systems not only give you real exclusivity, but added value too. We don't just charge what we feel the market will stand for a premium grade exhaust; when you upgrade to Scorpion you are paying for quality R&D, the finest hand selected materials, extensive testing and for the skill of an automotive engineer. You really are getting more bang for your buck.
Features:
- Lifetime warranty
- Hand made in the UK
- Acoustically developed sound
- Made from T304 grade stainless steel
TRACK TO ROAD ADVANTAGE
Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle.
This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only.
Downpipes with Sports Cats or Decat
INFO:
Fitment Years: 2019 - 2025
Model: Supra A90 3.0T GPF Models Only, BMW M340i G20 xDrive
Fits To: OEM / Scorpion
Pipe Diameter: 125mm/5"
Notes: Engine management light may be activated, Stage 2 ECU remap recommended
Turbo Downpipes:
Ready to push the limits — what are the benefits? We offer high-flow turbo downpipes for drivers and enthusiasts seeking maximum tuning potential — whether fine-tuning on the dyno or pushing every horsepower at the track. Scorpion’s advanced downpipe technology is engineered for uncompromising performance and built to endure.
Our downpipes increase horsepower, dramatically improve gas flow for better turbo spool and reduced back pressure, and amplify the exhaust note for a more aggressive, race-inspired sound. (For motorsport use only.)
Sports Cat: Equipped with high-performance sports catalysts featuring a 200-cell honeycomb design. This precision lattice structure offers significantly improved exhaust gas flow compared to the dense, high cell-count OEM catalysts. Emissions-conscious drivers can tune their vehicles while maintaining some level of control. Keep in mind that catalysts are most effective at their optimal operating temperature — not when cold.
De-Cat: Removes the catalyst entirely, allowing for maximum exhaust flow with no backpressure concerns — ideal for extreme high-horsepower builds. The purpose-built, smooth-bore design ensures optimal gas flow without the restrictions of a catalytic converter.
Scorpion Exhausts - Hand Crafted Performance Car Exhausts
Scorpion exhausts look the way they do in order to perform the way they must. Thankfully that no-compromise performance driven approach means stunning welding and forming craftsmanship, the finest grade materials, and beautiful designs. Turn the key and you get even more. Not just that unmistakable Scorpion soundtrack, but something else; something no other exhaust brand can give you. Red Power - the way a Scorpion exhaust feels, and makes you feel. The sum of a rich heritage of racing, development and innovation gives you a system sure to turn heads, but also one which feels amazing! If you are upgrading your exhaust, insist on the enthusiasts’ brand. Proven to perform at the very highest level. Built to stir your soul. TAKING ACOUSTICS TO THE NEXT LEVEL As with all Scorpion’s high performance products interchange ability with O.E systems are a priority, which is why Scorpion have developed solutions for both the earlier generation of vacuum exhaust valves as well as the latest generation.
Scorpion Stainless Steel Performance Exhausts
Life Time Guarantee For The First Purchase (Excluding Cats & Flexes)
High Quality Type-304 Aircraft Grade Stainless Steel
Over 25 Years of Continuous Exhaust Development and Technical Expertise
Hand Crafted Performance Exhausts
Designed & Made in The UK
Substantial Weight Saving Over Original Equipment Exhaust Systems
-----------------------------------------
This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only.
Downpipes with Sports Cats or Decats
Please note, this product fits multiple models. Please click on the model name below to view all available options.
MK8 Golf R GPF Model
S3 2.0TFSi 8Y Quattro (Sportback) GPF Model
S3 2.0T 8Y Quattro (Saloon) GPF Model
Leon ST VZ 4Drive 2.0STI DSG
INFO:
Fitment Years: 2020 - 2025
Fits To: OEM / Scorpion
Pipe Diameter: 80mm/3.15"
Notes: Engine management light may be activated, Stage 2 ECU remap recommended
Scorpion Exhausts - Hand Crafted Performance Car Exhausts
Scorpion exhausts look the way they do in order to perform the way they must. Thankfully that no-compromise performance driven approach means stunning welding and forming craftsmanship, the finest grade materials, and beautiful designs. Turn the key and you get even more. Not just that unmistakable Scorpion soundtrack, but something else; something no other exhaust brand can give you. Red Power - the way a Scorpion exhaust feels, and makes you feel. The sum of a rich heritage of racing, development and innovation gives you a system sure to turn heads, but also one which feels amazing! If you are upgrading your exhaust, insist on the enthusiasts’ brand. Proven to perform at the very highest level. Built to stir your soul. TAKING ACOUSTICS TO THE NEXT LEVEL As with all Scorpion’s high performance products interchange ability with O.E systems are a priority, which is why Scorpion have developed solutions for both the earlier generation of vacuum exhaust valves as well as the latest generation.
Scorpion Stainless Steel Performance Exhausts
Life Time Guarantee For The First Purchase (Excluding Cats & Flexes)
High Quality Type-304 Aircraft Grade Stainless Steel
Over 25 Years of Continuous Exhaust Development and Technical Expertise
Hand Crafted Performance Exhausts
Designed & Made in The UK
Substantial Weight Saving Over Original Equipment Exhaust Systems
-----------------------------------------
Description
FITS:
Cupra Leon ST VZ 4Drive 2.0TSi
KEY FACTS
Fitment Years: 2020 - 2025
Model: Leon ST VZ 4Drive
Fits To: OEM / Scorpion
Pipe Diameter: 80mm/3.15"
Scorpion's meticulous attention to detail and superior engineering skills put them at the very top in terms of construction quality and reliability. But the real difference is the way a Scorpion feels. No other exhaust feels like a Scorpion because no other exhaust is created with our passion and that's one thing which can never be copied. Scorpion's hand built systems not only give you real exclusivity, but added value too. We don't just charge what we feel the market will stand for a premium grade exhaust; when you upgrade to Scorpion you are paying for quality R&D, the finest hand selected materials, extensive testing and for the skill of an automotive engineer. You really are getting more bang for your buck.
Features:
- Lifetime warranty
- Hand made in the UK
- Acoustically developed sound
- Made from T304 grade stainless steel
TRACK TO ROAD ADVANTAGE
Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle.
This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only.
Downpipes with Sports Cats
INFO:
Fitment Years: 2018 - 2024
Model: UP! GTI & 1.0 TSI
Fits To: OEM / Scorpion
Pipe Diameter: 76mm/3"
Notes: Engine management light may be activated, Stage 2 ECU remap recommended
Scorpion Exhausts - Hand Crafted Performance Car Exhausts
Scorpion exhausts look the way they do in order to perform the way they must. Thankfully that no-compromise performance driven approach means stunning welding and forming craftsmanship, the finest grade materials, and beautiful designs. Turn the key and you get even more. Not just that unmistakable Scorpion soundtrack, but something else; something no other exhaust brand can give you. Red Power - the way a Scorpion exhaust feels, and makes you feel. The sum of a rich heritage of racing, development and innovation gives you a system sure to turn heads, but also one which feels amazing! If you are upgrading your exhaust, insist on the enthusiasts’ brand. Proven to perform at the very highest level. Built to stir your soul. TAKING ACOUSTICS TO THE NEXT LEVEL As with all Scorpion’s high performance products interchange ability with O.E systems are a priority, which is why Scorpion have developed solutions for both the earlier generation of vacuum exhaust valves as well as the latest generation.
Scorpion Stainless Steel Performance Exhausts
Life Time Guarantee For The First Purchase (Excluding Cats & Flexes)
High Quality Type-304 Aircraft Grade Stainless Steel
Over 25 Years of Continuous Exhaust Development and Technical Expertise
Hand Crafted Performance Exhausts
Designed & Made in The UK
Substantial Weight Saving Over Original Equipment Exhaust Systems
-----------------------------------------
IMAGES ARE ONLY TO SHOW THE FINISH OF THE TIPS AND ARE NOT SPECIFICALLY THE TIPS YOU WILL RECIEVE! YOU WILL RECEIVE ONE EXHAUST TIP ONLY
100mm Tip Assembly replacement tips for milltek system
To replace existing or change current colour scheme
This part is suitable for use on the following vehicles:
Ford Bronco 6th Gen - 2.3l i4 & 2.7l V6 Ecoboost (4 Door Model Only) (2021 and Later)Ford F150 SuperCrew (5.5ft Bed) 3.5 V6 EcoBoost (2021 and Later)Ford F150 SuperCrew (5.5ft Bed) 5.0 V8 (2021 and Later)Ford Mustang 5.0 V8 GT (Fastback) (2015 to 2018)Ford Mustang 2.3 EcoBoost (S550 Fastback) (2015 to 2018)Ford Mustang 2.3 EcoBoost (S650 Fastback) (2024 and Later)Jeep Wrangler JL/JLU 3.6 V6 2 Door Models (Excluding 4Xe) (2019 and Later)Jeep Wrangler JL/JLU 3.6 V6 4 Door Models (Excluding 4Xe) (2019 and Later)Toyota Tacoma 3.5L V6 Crew Cab (5ft Bed) & Extended Cab (6ft Bed) (2016 to 2023)
Exhaust System numbers that use this part:
SSXFD219SSXFD221SSXFD223SSXFD225SSXFD467SSXFD471SSXFD487SSXFD507SSXFD511SSXJP115SSXJP120SSXJP125SSXJP130SSXM432SSXM434SSXTY194SSXTY199
This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only.
Volkswagen Golf Mk7 / Mk7.5 R 2.0 TSI 2013-2020 models
Suitable for both GPF and Non-GPF models
Description
Direnza Performance Decat Pipe, manufactured from T304 grade, brushed stainless steel. Handcrafted by our specialist engineering team to ensure high quality & accurate fitment.
A direct replacement for the stock part, Direnza mandrel-bent exhaust components are fully TIG welded and feature CNC-machined flanges for strength and an accurate, secure fit every time.
Engineered to not only improve power and torque across the entire RPM range but Direnza exhaust components improve throttle response to help you push further and faster on the road or the track.
Free flowing 3.5″ bore straight through to optimise exhaust flow until the cat back part of the system.
Weight
9 kg
Product Category
Exhaust Decat
Exhaust Decat - Length (mm)
650
Exhaust Decat - Pipe Bore (mm)
88.9-76.2-65
Sensor Ports
4
Description
FITS:
Jaguar F-Type R 2014-2019
KEY FACTS
Fitment Years: 2014 - 2019
Model: F-Type R
Fits To: OEM / Scorpion
Pipe Diameter: 63.5mm/2.5"
Tailpipe Diameter - 90mm
Scorpion's meticulous attention to detail and superior engineering skills put them at the very top in terms of construction quality and reliability. But the real difference is the way a Scorpion feels. No other exhaust feels like a Scorpion because no other exhaust is created with our passion and that's one thing which can never be copied. Scorpion's hand built systems not only give you real exclusivity, but added value too. We don't just charge what we feel the market will stand for a premium grade exhaust; when you upgrade to Scorpion you are paying for quality R&D, the finest hand selected materials, extensive testing and for the skill of an automotive engineer. You really are getting more bang for your buck.
Features:
- Lifetime warranty
- Hand made in the UK
- Acoustically developed sound
- Made from T304 grade stainless steel
After its launch in the 1950’s the Fiat 500 was produced for almost 20 years going on to become an iconic model. When the decision was taken to relaunch the model in 2007 50 years after the first it was natural that Abarth a name synonymous with Fiat and performance would be involved producing their own 500/595/695 variants.
To compliment these Scorpion have developed a cat-back 63.5mm/2.5”, non-resonated system with a choice of 100mm Carbon Ascari, polished Daytona or black ceramic coated Daytona tailpipes. The cat back system not only enhances performance it gives a deeper sportier tone than the original. In addition, for the models with the Garret turbo fitted there is the option of a 76mm/3” de-cat downpipe for those wanting to further tune their 1.4 turbo Abarth’s.
TRACK TO ROAD ADVANTAGE
Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle.
This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only.
Downpipes with Sports Cats
INFO:
Fitment Years: 2014 - 2019
Model: F-Type R
Fits To: OEM / Scorpion
Pipe Diameter: 70mm/2.75"
Notes: Engine management light may be activated, Stage 2 ECU remap recommended
Scorpion Exhausts - Hand Crafted Performance Car Exhausts
Scorpion exhausts look the way they do in order to perform the way they must. Thankfully that no-compromise performance driven approach means stunning welding and forming craftsmanship, the finest grade materials, and beautiful designs. Turn the key and you get even more. Not just that unmistakable Scorpion soundtrack, but something else; something no other exhaust brand can give you. Red Power - the way a Scorpion exhaust feels, and makes you feel. The sum of a rich heritage of racing, development and innovation gives you a system sure to turn heads, but also one which feels amazing! If you are upgrading your exhaust, insist on the enthusiasts’ brand. Proven to perform at the very highest level. Built to stir your soul. TAKING ACOUSTICS TO THE NEXT LEVEL As with all Scorpion’s high performance products interchange ability with O.E systems are a priority, which is why Scorpion have developed solutions for both the earlier generation of vacuum exhaust valves as well as the latest generation.
Scorpion Stainless Steel Performance Exhausts
Life Time Guarantee For The First Purchase (Excluding Cats & Flexes)
High Quality Type-304 Aircraft Grade Stainless Steel
Over 25 Years of Continuous Exhaust Development and Technical Expertise
Hand Crafted Performance Exhausts
Designed & Made in The UK
Substantial Weight Saving Over Original Equipment Exhaust Systems
-----------------------------------------
Replacement Exhaust Valve motor for the exhaust valve on the MK8 / 8.5 Fiesta ST
Ideal if yours is damaged or if you have a post 2020 model with the different valve which wont fit with exhausts!
These are plug and play fitment
Will fit the following vehicles:
Ford Fiesta Mk8 & Mk8.5 ST 1.5 EcoBoost 200PS All Years (2018-2024)
Ford Puma ST 1.5 200ps EcoBoost (OPF/GPF Equipped) (2020 and Later)
Ford Puma ST 1.0 170PS (OPF/GPF Equipped Vehicles) (2023 and Later)
Audi RS4 B9 2.9 V6 Turbo Avant (OPF/GPF Models) (2019 and Later)
Audi RS5 B9 2.9 V6 Turbo Coupe (OPF/GPF Models) (2019 and Later)
Audi RS5 B9.5 2.9 V6 Turbo Coupe (Non OPF Models) (2019 and Later)
Audi RS5 B9 2.9 V6 Turbo Sportback (OPF/GPF Models) (2019 and Later)
Audi RS5 B9.5 2.9 V6 Turbo Sportback (Non OPF Models) (2019 and Later)
Seat Cupra Formentor VZ5 2.5T 5 Cylinder 390PS 4Drive (2021 and Later)
Replacement Exhaust Valve motor for the exhaust valve on the MK8 / 8.5 Fiesta ST
Ideal if yours is damaged or if you have a post 2020 model with the different valve which wont fit with exhausts!
These are plug and play fitment
Will fit the following vehicles:
Ford Fiesta Mk8 & Mk8.5 ST 1.5 EcoBoost 200PS All Years (2018-2024)
Ford Puma ST 1.5 200ps EcoBoost (OPF/GPF Equipped) (2020 and Later)
Ford Puma ST 1.0 170PS (OPF/GPF Equipped Vehicles) (2023 and Later)
Audi RS4 B9 2.9 V6 Turbo Avant (OPF/GPF Models) (2019 and Later)
Audi RS5 B9 2.9 V6 Turbo Coupe (OPF/GPF Models) (2019 and Later)
Audi RS5 B9.5 2.9 V6 Turbo Coupe (Non OPF Models) (2019 and Later)
Audi RS5 B9 2.9 V6 Turbo Sportback (OPF/GPF Models) (2019 and Later)
Audi RS5 B9.5 2.9 V6 Turbo Sportback (Non OPF Models) (2019 and Later)
Seat Cupra Formentor VZ5 2.5T 5 Cylinder 390PS 4Drive (2021 and Later)
Replacement Exhaust Valve motor for the exhaust valve on the MK8 / 8.5 Fiesta ST
Ideal if yours is damaged or if you have a post 2020 model with the different valve which wont fit with exhausts!
These are plug and play fitment
Will fit the following vehicles:
Ford Fiesta Mk8 & Mk8.5 ST 1.5 EcoBoost 200PS All Years (2018-2024)
Ford Puma ST 1.5 200ps EcoBoost (OPF/GPF Equipped) (2020 and Later)
Ford Puma ST 1.0 170PS (OPF/GPF Equipped Vehicles) (2023 and Later)
Audi RS4 B9 2.9 V6 Turbo Avant (OPF/GPF Models) (2019 and Later)
Audi RS5 B9 2.9 V6 Turbo Coupe (OPF/GPF Models) (2019 and Later)
Audi RS5 B9.5 2.9 V6 Turbo Coupe (Non OPF Models) (2019 and Later)
Audi RS5 B9 2.9 V6 Turbo Sportback (OPF/GPF Models) (2019 and Later)
Audi RS5 B9.5 2.9 V6 Turbo Sportback (Non OPF Models) (2019 and Later)
Seat Cupra Formentor VZ5 2.5T 5 Cylinder 390PS 4Drive (2021 and Later)
Replacement Exhaust Valve motor for the exhaust valve on the MK8 / 8.5 Fiesta ST
Ideal if yours is damaged or if you have a post 2020 model with the different valve which wont fit with exhausts!
These are plug and play fitment
Will fit the following vehicles:
Ford Fiesta Mk8 & Mk8.5 ST 1.5 EcoBoost 200PS All Years (2018-2024)
Ford Puma ST 1.5 200ps EcoBoost (OPF/GPF Equipped) (2020 and Later)
Ford Puma ST 1.0 170PS (OPF/GPF Equipped Vehicles) (2023 and Later)
Audi RS4 B9 2.9 V6 Turbo Avant (OPF/GPF Models) (2019 and Later)
Audi RS5 B9 2.9 V6 Turbo Coupe (OPF/GPF Models) (2019 and Later)
Audi RS5 B9.5 2.9 V6 Turbo Coupe (Non OPF Models) (2019 and Later)
Audi RS5 B9 2.9 V6 Turbo Sportback (OPF/GPF Models) (2019 and Later)
Audi RS5 B9.5 2.9 V6 Turbo Sportback (Non OPF Models) (2019 and Later)
Seat Cupra Formentor VZ5 2.5T 5 Cylinder 390PS 4Drive (2021 and Later)
Replacement Exhaust Valve motor for the exhaust valve on the MK8 / 8.5 Fiesta ST
Ideal if yours is damaged or if you have a post 2020 model with the different valve which wont fit with exhausts!
These are plug and play fitment
Will fit the following vehicles:
Ford Fiesta Mk8 & Mk8.5 ST 1.5 EcoBoost 200PS All Years (2018-2024)
Ford Puma ST 1.5 200ps EcoBoost (OPF/GPF Equipped) (2020 and Later)
Ford Puma ST 1.0 170PS (OPF/GPF Equipped Vehicles) (2023 and Later)
Audi RS4 B9 2.9 V6 Turbo Avant (OPF/GPF Models) (2019 and Later)
Audi RS5 B9 2.9 V6 Turbo Coupe (OPF/GPF Models) (2019 and Later)
Audi RS5 B9.5 2.9 V6 Turbo Coupe (Non OPF Models) (2019 and Later)
Audi RS5 B9 2.9 V6 Turbo Sportback (OPF/GPF Models) (2019 and Later)
Audi RS5 B9.5 2.9 V6 Turbo Sportback (Non OPF Models) (2019 and Later)
Seat Cupra Formentor VZ5 2.5T 5 Cylinder 390PS 4Drive (2021 and Later)
IMAGES ARE ONLY TO SHOW THE FINISH OF THE TIPS AND ARE NOT SPECIFICALLY THE TIPS YOU WILL RECIEVE! YOU WILL RECEIVE ONE EXHAUST TIP ONLY
1x 90mm Tip Assembly replacement tips for milltek system
To replace existing or change current colour scheme
This part is suitable for use on the following vehicles:
Audi S4 3.0 Turbo V6 B9 - Saloon/Sedan & Avant (Non Sport Diff Models) - Left Hand Drive Cars Only (2016 and Later)Audi S4 3.0 Turbo V6 B9 - Saloon/Sedan & Avant (Non Sport Diff Models) - Right Hand Drive Cars Only (2016 and Later)Audi S5 3.0 V6 Turbo Sportback B9 (Non Sport Diff Models Only) - Right Hand Drive Cars Only (2017 and Later)Audi S5 3.0 V6 Turbo Sportback B9 (Non Sport Diff Models Only) - Left Hand Drive Cars Only (2017 and Later)BMW 1 Series 120i & 125i (F20 & F21 - B48 Engine Only inc OPF Models) (2016 to 2019)BMW 1 Series M140i 3 & 5 Door (F20 & F21 LCI, Non-OPF) (2015 to 2018)BMW 1 Series M140i 3 & 5 Door (F20 & F21 LCI, OPF/GPF Only) (2019 to 2020)BMW 2 Series M240i Coupe (F22 LCI, Non-OPF & None xDrive) (2015 to 2018)BMW 2 Series M240i Coupe (F22 LCI, OPF Only & Non xDrive Models) (2019 to 2020)BMW 2 Series M2 Coupé (F87) (2016 to 2018)BMW 2 Series M2 Competition Coupé (F87) (2018 and Later)BMW 3 Series F30 320i L M Sport Saloon (Long wheelbase) (LCI models, None xDrive, Non-OPF & B48 Engine) (2015 to 2019)BMW 3 Series F30 320i M Sport Saloon (LCI models, None xDrive, Non-OPF & B48 Engine) (2015 to 2019)BMW 3 Series F31 M340i Touring (2018 to 2019)BMW 3 Series F80 M3 & M3 Competition Saloon (Non OPF/GPF Models Only) (2014 to 2018)BMW 3 Series F80 M3, M3 Competition & M3 CS Saloon (OPF/GPF Models Only) (2019 to 2020)BMW 4 Series F82/83 M4 Coupe/Convertible & M4 Competition Coupé (Non-OPF equipped models only) (2014 to 2018)BMW 4 Series F82/83 M4 Coupe/Convertible, M4 Competition & M4 CS Coupé (OPF/GPF equipped models only) (2019 to 2020)Ford Fiesta Mk8 1.0T EcoBoost ST-Line 3 & 5 Door (Non-OPF/GPF Models Only) (2017 to 2019)Ford Fiesta Mk8 1.0T EcoBoost ST-Line 3 & 5 Door (100,125 & 140ps OPF/GPF Models Only) (2019 and Later)Ford Fiesta Mk8 1.0T EcoBoost ST-Line 3 & 5 Door (155ps Hybrid OPF/GPF Models Only (2020 and Later)Ford Fiesta Mk8 ST 1.5 EcoBoost 200PS (Pre Sept 2020 Models Only) (2018 to 2020)Ford Fiesta Mk8 & Mk8.5 ST 1.5 EcoBoost 200PS (Post Sept 2020 Models Only) (2020 and Later)Ford Mustang 5.0 V8 GT (Fastback) (2015 to 2018)Ford Puma ST 1.5 200ps EcoBoost (OPF/GPF Equipped) (2020 and Later)Ford Puma ST 1.0 170PS (OPF/GPF Equipped Vehicles) (2023 and Later)Ford Ranger 2.0TDCI 205PS Bi-Turbo Diesel (2022 and Later)Hyundai / Kia i20 N 1.6 T-GDi 204PS (OPF/GPF Equipped Cars Only) (2021 and Later)INEOS Grenadier B58 3.0 I6 Turbo Petrol (2023 and Later)INEOS Grenadier B57 3.0 I6 Turbo Diesel (2023 and Later)INEOS Quartermaster 3.0 (B58) Petrol (OPF & Non-OPF Vehicles) (2024 and Later)INEOS Quartermaster 3.0 (B57) Diesel (2024 and Later)Land Rover / Range Rover Defender D200, D250 & D300 90, 110 & 130 (Diesel Models) (2019 and Later)Land Rover / Range Rover Defender 90 2.0 I4 P300 & P400e (OPF/GPF and Non-OPF/GPF Equipped Vehicle Compatible) (2020 and Later)Land Rover / Range Rover Defender 90 3.0 I6 P400 (OPF/GPF and Non-OPF/GPF Equipped Vehicle Compatible) (2020 and Later)Land Rover / Range Rover Defender 110 2.0 I4 P300 & P400e (OPF/GPF and Non-OPF/GPF Equipped Vehicle Compatible) (2020 and Later)Land Rover / Range Rover Defender 110 3.0 I6 P400 (OPF/GPF and Non-OPF/GPF Equipped Vehicle Compatible) (2020 and Later)Land Rover / Range Rover Defender 130 2.0 I4 P300 & P400e (OPF/GPF and Non-OPF/GPF Equipped Vehicle Compatible) (2023 and Later)Land Rover / Range Rover Defender 130 3.0 I6 P400 (OPF/GPF and Non-OPF/GPF Equipped Vehicle Compatible) (2023 and Later)Land Rover / Range Rover Defender 90 5.0 V8 525PS (OPF/GPF Vehicles Only) (2021 and Later)Land Rover / Range Rover Defender 90 5.0 V8 525PS (NAS Non-OPF/GPF Vehicles Only) (2021 and Later)Land Rover / Range Rover Defender 110 5.0 V8 525PS (OPF/GPF Vehicles Only) (2021 and Later)Land Rover / Range Rover Defender 110 5.0 V8 525PS (NAS Non-OPF/GPF Vehicles Only) (2021 and Later)Land Rover / Range Rover Defender 130 5.0 V8 500PS (OPF/GPF Vehicles Only) (2023 and Later)Land Rover / Range Rover Defender 130 5.0 V8 500PS (NAS Non-OPF/GPF Vehicles Only) (2023 and Later)Mercedes G-Class G63 (W463) 4.0 Bi-Turbo V8 (ROW Non GPF/OPF Cars Only) (2019 and 2024)Mercedes G-Class G63 (W463) 4.0 Bi-Turbo V8 (UK/European GPF/OPF Cars Only) (2019 to 2024)Mercedes G-Class G63 (W465) 4.0 Bi-Turbo V8 (Both GPF/OPF EU & NAS Non-OPF Cars) (2024 and Later)New Mini Mk3 (F56) Mini Cooper S 2.0 Turbo (UK and European models & Pre-LCI Only) (2014 to 2018)New Mini Mk3 (F55) Mini Cooper S 2.0 Turbo - 5 Door Hatch (ROW/NA Models) (2014 and Later)New Mini Mk3 (F56) Mini Cooper S 2.0 Turbo (Rest of World) (2014 and later)New Mini Mk3 (F55) Mini Cooper S 2.0 Turbo - 5 Door Hatch (UK and European models) - LCI with GPF/OPF Only (2019 and Later)New Mini Mk3 (F56) Mini Cooper S 2.0 Turbo (UK and European models) - LCI with GPF/OPF Only (2019 to 2020)New Mini Mk3 (F56) Mini Cooper S 2.0 Turbo (UK and European models) - LCI with GPF/OPF Only - 70mm OE Systems (2020 to 2024)New Mini Mk3 Mini JCW & GP3 2.0 Turbo (UK and European models) - GPF/OPF Only (2020 and Later)Renault / Alpine A110 A110S 1.8TCe (S Models only) (2019 and Later)Volkswagen Polo GTI 2.0 TSI (AW - 5 Door) - Non GPF/OPF Models Only (2018 to 2019)Volkswagen Polo 1.5 TSI (AW 5 Door inc Facelift Models) - GPF/OPF Models Only (2019 and Later)Volkswagen Polo GTI 2.0 TSI (AW 5 Door PRE Facelift Models only) - GPF/OPF Models Only (2019 to 2021)Volkswagen Polo GTI 2.0 TSI 207ps (AW 5 Door Facelift Models) - GPF/OPF Models Only (2021 and Later)Volkswagen Up! 1.0TSI 90PS (3 & 5 Door) (2016 and Later)Volkswagen Up! GTI 1.0TSI 115PS (3 & 5 Door) (2018 and Later)
Exhaust System numbers that use this part:
SSXAU1077SSXAU1084SSXAU1177SSXAU1184SSXAU647SSXAU654SSXBM1036SSXBM1043SSXBM1049SSXBM1053SSXBM1059SSXBM1070SSXBM1075SSXBM1083SSXBM1089SSXBM1104SSXBM1109SSXBM1114SSXBM1116SSXBM1120SSXBM1123SSXBM1136SSXBM1143SSXBM1150SSXBM1167SSXFD229SSXFD242SSXFD247SSXFD252SSXFD259SSXFD289SSXFD295SSXFD349SSXFD354SSXFD394SSXFD400SSXFD446SSXHY156SSXHY161SSXINE104SSXINE109SSXINE118SSXINE125SSXLR103SSXLR108SSXLR113SSXLR118SSXLR123SSXLR128SSXLR133SSXLR138SSXLR143SSXLR148SSXLR153SSXLR158SSXLR166SSXLR171SSXLR176SSXLR181SSXLR186SSXLR207SSXLR212SSXLR217SSXLR222SSXLR237SSXLR242SSXM438SSXM441SSXM448SSXM458SSXM464SSXM470SSXM475SSXM484SSXM489SSXM500SSXMZ162SSXMZ167SSXMZ169SSXRN429SSXVW430SSXVW435SSXVW486SSXVW504SSXVW559SSXVW736
THIS ITEM IS A CLEARANCE ITEM AND IS NONE RETURNABLE. IT IS A CUSTOMER RETURN WHO ORDERED THE INCORRECT TIP. THE ITEM IS BRAND NEW AND HAS NEVER BEEN INSTALLED
Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality.
These performance exhausts are made in 2"/50.8mm pipework and fit from the centre section backwards replacing the rear section.
All relevant fittings and gaskets are supplied.
(Note- Only fits petrol models).
This only fits the ST rear panel available from your local Ford dealer (Part number - F13559944/137105).
Related Media Files
Example of cat back exhaust (non-resonated).
Example of cat back exhaust (resonated).
Cobra Sport Exhausts Ford promotional video.
Rear Valance V.3 + Milltek Sport Exhaust BMW 1 F40 M-Pack / M135i
FITS:
BMW 1 F40 M-Pack 2019 - 2024BMW 1 F40 M135i 2019 - 2024COMPLETE SET CONTAINS:- Rear diffuser - Milltek GPF/OPF back exhaust system
MILLTEK DESCRIPTION:
Every Milltek system is designed, developed and hand-finished here in the UK by time-served craftsmen, each one produced in aerospace grade type 304, non-magnetic stainless steel. This superior material is less susceptible to discolouration, lasts almost indefinitely and is used throughout the entire construction of our pipework, silencers and associated hardware.Mandrel bending ensures constant radius bends for optimised gasflow, and bore diameters are carefully enlarged over stock to ensure ultimate performance without the loss of mid-range torque. All of the Milltek exhaust systems endure a comprehensive acoustic development process to deliver a tone that is sporty and crisp, without ever inducing NVH, drone or cabin resonance.
We always recommend the exhaust is fitted by a competent garage or tuning workshop so normally avoid issuing install guides.
MILLTEK EU TYPE-APPROVAL CERTIFICATE
The systems are 2.76 inch (70mm tube) and there are downpipes available to remove the OPF with and without Hi Flow Sports Cats.The pre sept systems require re-use of the OEM Valve actuator, however the post sept models changed, and we therefore now supply the correct actuator to work with the same system.There is also an Active Valve Control available for these models to give the user complete control over the valve positions at different drive modes / ranges.The OPF-Back System is EC Approved.
REAR DIFFUSER DESCRIPTION:
** This product is a replacement for original diffuser **
CHARACTERISTICS OF REAR DIFFUSER:- Adds aesthetic value.- Lightweight and offers some flexibility.- This product is made from ABS plastic. The same material is used widely in the automotive industry.
MORE INFORMATION ABOUT REAR DIFFUSER:- No additional work is required to finish the product.- The product will arrive with a protective film.- Removal of the protective film will void any returns, only remove once you are certain the product will fit.- We cannot be held responsible for the incorrect installation or use of this product.- Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.- We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.- This product has been TUV MATERIALGUTACHTEN certified.- The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.
Product is made of ABS plastic.
Available in three surface look options: textured, gloss black, carbon look.
This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).
Rear Valance + Milltek Sport Non-Resonated Exhaust Audi RS3 Sportback 8V Facelift
FITS:
Audi RS3 Sportback 8V Facelift (2017-2020)** Non-Resonated Cat Back **COMPLETE SET CONTAINS:- Rear diffuser - Milltek GPF/OPF back exhaust system
MILLTEK DESCRIPTION:
Every Milltek system is designed, developed and hand-finished here in the UK by time-served craftsmen, each one produced in aerospace grade type 304, non-magnetic stainless steel. This superior material is less susceptible to discolouration, lasts almost indefinitely and is used throughout the entire construction of our pipework, silencers and associated hardware.Mandrel bending ensures constant radius bends for optimised gasflow, and bore diameters are carefully enlarged over stock to ensure ultimate performance without the loss of mid-range torque. All of the Milltek exhaust systems endure a comprehensive acoustic development process to deliver a tone that is sporty and crisp, without ever inducing NVH, drone or cabin resonance.
We always recommend the exhaust is fitted by a competent garage or tuning workshop so normally avoid issuing install guides.
MILLTEK EU TYPE-APPROVAL CERTIFICATE
The systems are 2.76 inch (70mm tube) and there are downpipes available to remove the OPF with and without Hi Flow Sports Cats.The pre sept systems require re-use of the OEM Valve actuator, however the post sept models changed, and we therefore now supply the correct actuator to work with the same system.There is also an Active Valve Control available for these models to give the user complete control over the valve positions at different drive modes / ranges.The OPF-Back System is EC Approved.
REAR DIFFUSER DESCRIPTION:
** This product is a replacement for original diffuser **
CHARACTERISTICS OF REAR DIFFUSER:- Adds aesthetic value.- Lightweight and offers some flexibility.- This product is made from ABS plastic. The same material is used widely in the automotive industry.
MORE INFORMATION ABOUT REAR DIFFUSER:- No additional work is required to finish the product.- The product will arrive with a protective film.- Removal of the protective film will void any returns, only remove once you are certain the product will fit.- We cannot be held responsible for the incorrect installation or use of this product.- Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.- We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.- This product has been TUV MATERIALGUTACHTEN certified.- The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.
Product is made of ABS plastic.
Available in three surface look options: textured, gloss black, carbon look.
This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).
Rear Valance + Milltek Sport Resonated Exhaust Audi RS3 Sportback 8V Facelift
FITS:
Audi RS3 Sportback 8V Facelift (2017-2020)** Resonated Cat Back **COMPLETE SET CONTAINS:- Rear diffuser - Milltek GPF/OPF back exhaust system
MILLTEK DESCRIPTION:
Every Milltek system is designed, developed and hand-finished here in the UK by time-served craftsmen, each one produced in aerospace grade type 304, non-magnetic stainless steel. This superior material is less susceptible to discolouration, lasts almost indefinitely and is used throughout the entire construction of our pipework, silencers and associated hardware.Mandrel bending ensures constant radius bends for optimised gasflow, and bore diameters are carefully enlarged over stock to ensure ultimate performance without the loss of mid-range torque. All of the Milltek exhaust systems endure a comprehensive acoustic development process to deliver a tone that is sporty and crisp, without ever inducing NVH, drone or cabin resonance.
We always recommend the exhaust is fitted by a competent garage or tuning workshop so normally avoid issuing install guides.
MILLTEK EU TYPE-APPROVAL CERTIFICATE
The systems are 2.76 inch (70mm tube) and there are downpipes available to remove the OPF with and without Hi Flow Sports Cats.The pre sept systems require re-use of the OEM Valve actuator, however the post sept models changed, and we therefore now supply the correct actuator to work with the same system.There is also an Active Valve Control available for these models to give the user complete control over the valve positions at different drive modes / ranges.The OPF-Back System is EC Approved.
REAR DIFFUSER DESCRIPTION:
** This product is a replacement for original diffuser **
CHARACTERISTICS OF REAR DIFFUSER:- Adds aesthetic value.- Lightweight and offers some flexibility.- This product is made from ABS plastic. The same material is used widely in the automotive industry.
MORE INFORMATION ABOUT REAR DIFFUSER:- No additional work is required to finish the product.- The product will arrive with a protective film.- Removal of the protective film will void any returns, only remove once you are certain the product will fit.- We cannot be held responsible for the incorrect installation or use of this product.- Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.- We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.- This product has been TUV MATERIALGUTACHTEN certified.- The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.
Product is made of ABS plastic.
Available in three surface look options: textured, gloss black, carbon look.
This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).
Scorpion Exhaust - Golf MK5 GTi Original centre silencer delete pipe
None resonated
FITS:
MK5 Golf GTI
MK Golf GTI Edition 30
Contents:
OE Res Delete Pipe
Fitting Kit
Good to know:
Fits To: OEM Only
Pipe Diameter: 70mm/2.75"
OEM Resonator Delete:What are the benefits of a resonator delete? Retain your standard back box for a stealthy aesthetic while enhancing your exhaust sound. Though a resonator delete won’t provide the full benefits of a complete performance exhaust system, it removes the factory resonator designed to mute your exhaust. This upgrade delivers a more aggressive tone, a slight weight reduction, and potential performance gains. (Fits the OEM back box and/or rear section only.)The Scorpion Advantage:Precision-engineered Scorpion exhausts incorporate our cutting-edge track-to-road technology, sharing proven motorsport tech with you. Crafted from premium T304 stainless steel, designed to endure the harshest of conditions. CNC Mandrel bent construction provides unmatched gas-flow, enhancing throttle response and boosting BHP. The manufacturing process also ensures weight-saving gains compared to OEM.Upgrade with Scorpion today for unrivalled acoustics and a driving experience taken to the next level!