Ford Focus MK3

This Silver / Cut 3SDM 0.01 Wheel comes in a 18" by 8.5" size with a PCD of 5x108 and an offset of 45mmThe 18"x8.5" 0.01 Features a per wheel load raiting of 675kgNOTE: The images provided are generic images for this series of wheel and do not depict a specific size or ofset. All sets of 3DSM Cast wheels come with a free fitting kit of nuts/bolts and spigot rings.Please ensure your Make/Model and year are provided accurately to ensure we can identify the correct thread and centre bore.

Read more less

Pack of 4 none drill universal canard set with carbon finish  These are the smaller sizes of Canar - for you to create the ultimate look on your vehicle - ideal for the rear of the car or for any small vehicle front Coated with matte black vinyl these give the carbon affect and add a really cost effective race look to any vehicle  The canards come with pre applied 3M scotch tape meaning there is no drilling or screwing required for application.  Heat up the tape and ensure the area is cleaned with IPA or alchohol wipe prior to application for best results 

Read more less

Replace your Awful Chrome and Red ST badges with our full 4D Replacement's Made from Premium 3mm Acrylic (6mm total with 2 colours) these come with 3M Tape already applied to stick straight on in place of your existing badges! Using the latest in Laser technology, these badges are cut with a smooth edge for a perfect finish! And using 3M's best Out door tape, which gets stronger in adverse weather conditions guaranteeing you will never lose them! Create your own look, with ANY colour Backing and Front to give you a truly Unique experience! The price shown is for 1 Pair (1 Front Small and 1 Rear Large) This is NOT a Gel Inlay - Your OEM Badges will need to be removed

Read more less

Pack of 6 none drill universal canard set with carbon finish and Gloss Black Finish You get 3 sizes of Canard, with 2 of each size - for you to create the ultimate look on your vehicle Coated with matte black vinyl these give the carbon affect and add a really cost effective race look to any vehicle  The canards come with pre applied 3M scotch tape meaning there is no drilling or screwing required for application.  Heat up the tape and ensure the area is cleaned with IPA or alchohol wipe prior to application for best results 

Read more less

Here we give you the brand new wide mouth (or snorkel, as it can be known) for the MK3 focus - Facelift Models This is a straight fit with the removal of the bumper and is held on with 2 bolts! The snorkels are 3D Printed, and pressure tested prior to dispatch to ensure they are strong enough to handle all that is thrown at them! The snorkel is only available in black, However the mouth piece is available in a selection of colours! Technical Info: Max Flow - More speed = more air Prevents hot air being sucked in from the radiator Perfect finish and fit every time available in a multitude of colours Please Note: Whilst we will try and keep on top of stock we advise a 10-14 day delay on all orders, as if this needs to be made they take around 23 hours to print, then the testing to be carried out! Busy periods may be longer 

Read more less

Currently made to order, please allow 2-3 weeks before dispatch. Suitable for Ford Focus Mk3 RS with standard front bumpers. **IMPORTANT** Unpainted, comes finished in white or black coating. We HIGHLY recommend these items are fitted by a reputable body shop. Due to the moulding process and hand finishing of GRP parts, there may be some extra surface preparation on some of the items. Please ensure that your body shop has allowed for any extra preparation, tweaking and adjustments often required on GRP parts for a perfect fit before painting. It is important to trial fit all parts before preparation and painting. Once items have been prepared, primed, painted or modified in any way we cannot accept return of any unwanted items. Not all body shops are specialists in fitting GRP body kits and accessories, please ensure they quote accordingly to include any surface prep needed.  As fitted to our Mk3 RS Demo car. Registered Design Right number 6012612

Read more less

Finally an off the shelf way to fit a Race Tow Strap, no bumper removal and then never using it because your to scared it may crack your bumper due to being bolted in a incorrect towing position  In Fords wisdom they made the original towing eye thread custom, this meant we have to make a tool just to cut the thread on the adapter, then we added a flat section so you can tighten it with a 19mm spanner Complete kit, Genuine TRS Tow strap, adapter boss and Tow strap fixing bolt £34.95 Easy fit zinc plated Tow strap machined adapter thread 'M10 Thread' £24.95 Short tow bolt will fit Focus Mk2 and Mk3 models both ST and RS variants, and also Mk6 Fiesta ST150 Thread avalable on it's own, or with the optional tow strap.

Read more less

AIRTEC huge front mount intercooler for Mk3 Focus RS.   The AIRTEC intercooler is the only off the shelf intercooler that uses a 100mm deep core! We use this core only in the most extreme coolers, we name the 100mm core 'GobStopper' due to it's amazing cooling properties. Features of Stage 3.   Smooth flow curved end tanks, for that ultimate flow Huge high flow 100mm core Air-Ram Scoop, forces Air directly into core of intercooler Fitting takes 1-2 hours Increased BHP & torque Figure Available in Pro-Series Black or Natural Silver Strongest Intercooler available, backed up by our 3 year warranty. Fabricated in the UK, in house. Core Thickness 100mm 'this is used on a syvecs powered 800bhp focus rs with an intake temp of 34 degrees' Height 220mm Width 896mm   The 2.5" big boost pipe kit is a must for a remapped RS, everything you need is included in the kit. Features: Hot side (turbo to intercooler) is made from 2.5" light-weight alloy and connected with Pro Hoses 5 ply silicone hose joiners. Available in Pro-Series Black or Motorsport Silver pipework Will fit With the following intercoolers: AIRTEC Pace Pro-Alloy Forge Ford OEM Direct replacement! No modding required. Our 2.5" hard pipe upgrade removes Ford's 2.0" restrictive boost pipes and can see 'bolt on power'.  This kit is designed for BIG BHP / Remapped Focus RS's. All pipes have swaged ends to stop the pipes blowing off on higher power cars. AIRTEC Part no: ATINTFO44/INTBBP   Nitrous blue can be customer ordered with a 3-4 week turnaround

Read more less

PLEASE NOTE: This is for the intercooler only - without hoses PLEASE NOTE: this intercooler is only available in Pro-Series Black AIRTEC huge front mount intercooler for Mk3 Focus RS. The AIRTEC intercooler is the only off the shelf intercooler that uses a 100mm deep core! We use this core only in the most extreme coolers, we name the 100mm core 'GobStopper' due to it's amazing cooling properties. The AIRTEC intercooler for the MK3 Focus RS is already proving itself to be a huge hit in the RS scene and the must have for remapped cars. With the standard intercooler being pretty up to scratch, Airtec have taken this intercooler to a whole new level. Features of Stage 3. Smooth flow curved end tanks, for that ultimate flow Huge high flow 100mm core Air-Ram Scoop, forces Air directly into core of intercooler Fitting takes 1-2 hours Increased BHP & torque Figure Available in Pro-Series Black or Natural Silver Strongest Intercooler available, backed up by our 3 year warranty. Fabricated in the UK, in house.   Core Thickness 100mm 'this is used on a syvecs powered 800bhp focus rs with an intake temp of 34 degrees'   Height 220mm   Width 896mm   Ambient 16.0 degrees centigrade   Test results Into intercooler in degrees centigrade Run 1 - 155 Run 2 - 157 Run 3 - 160   Out of intercooler in degrees centigrade Run 1 - 18  Run 2 - 18 Run 3 - 19 Intercooler Volume Capacity (The amount of charged air that the intercooler can hold) Standard: 4.4AIRTEC: 7.3-litres

Read more less

AIRTEC high-flow turbo hard pipe for the Fiesta 1.0 EcoBoost improves the pressure drop across the charge system, improving the efficiency of the engine and improving the ability for additional performance to be added. Made with high quality stainless steel. The AIRTEC turbo hard pipe will improve airflow and turbo noise (dump valve pshhh) Features: High quality hard pipe Easy to fit Compatible with all Fiesta 1.0 EcoBoost models, Mk7 & Mk8 – 100PS, 125PS, 135PS, 140PS (Limited, Red & Black, 164 models).

Read more less

Is your intercooler looking a bit run down? AIRTEC logo stencil for all AIRTEC intercoolers, freshen up the look of your intercooler. Stencils available for all AIRTEC intercoolers.     Small logo size - (31 x 5cm) Ideal for Mini, Fiesta 1.6 Diesel, 1.0 EcoBoost (Stage 1) Medium logo (44 x 7cm) Ideal for Fiesta MK7 1.0 EcoBoost (Stage 2), Seat Sport, 2.0 TFSI, Astra, Renault Megane. Large logo (61 x 10cm) Ideal for Focus ST 225, Focus RS MK2, Astra VXR (Stage 3) Please note: Stencils are not model specific and can be used on any AIRTEC intercooler.

Read more less

AIRTEC front mount intercooler for the Focus ST MK3 Diesel. Designed to keep air shutters in place, to prevent cooling fans running on. Intercooler made to order, please allow 7-10 days. Approximate dimensions: Width 936mm Height 160mm Thickness ‘core’ 70mm available in black only  Registered Design Right number: 6022639 AIRTEC part no: ATINTFO43

Read more less