Ford

Forge Motorsport Boost Tap for the Ford Mustang 2.3 Ecoboost and the Mk3 Focus RS. This adaptor plate is installed between the boost (MAP) sensor and the mounting surface. This allows a tap to run a vacuum operated valve or for connection to a boost gauge.   In the box:1 x Vacuum tap1 x Allen Cap Bolt10 x Cable Ties1 x 3000mm of 4mm Vacuum Tube

Read more less

A set of ultra-high performance brake hoses for the 2013 MK7 Ford Fiesta ST.Hosetechnik lines are hand-finished with Teflon-lined braided stainless steel bodies and custom-machined stainless fittings. They are available in no less than 12 hard-wearing PVC sleeve colours, which look amazing, and protect against dirt and water ingress.The hoses meet, or exceed, all current FMV. ADR, LTSA, DOT and TUV legislation, making these upgrades totally legal in any market.

Read more less

Forge Motorsport FMINDK5 – Fiesta 1.0 Ecoboost intake The 1.0 Ecoboost engine runs a small turbocharger so the key to releasing power from the engine is minimising restriction, which is exactly what the Forge motorsport intake does. Featuring a fully CNC machined MAF housing and pipe that matches the standard Ecoboost housing exactly, coupled to a large Pipercross airfilter, the Forge Motorsport Ecoboost intake looks as good as it sounds, with a noticeable increase in induction and dump valve recirculation noise. The kit comes complete with all parts necessary to fit, including a large heatshield in order to reduce inlet temperatures. Full instructions are included.

Read more less

A replacement turbo actuator for the Ford Focus ST250. This product is built with a predetermined actuator spring suitable for at or slightly above factory boost levels. The actuator can be assembled with a stiffer spring upon request. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket. Please Note: The pressure figures listed in the drop down menu above are minimum regulated pressure figures. Forge Motorsport nor any of it’s authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure.   In The Box:1 x FMACST250 Actuator1 x Forge Sticker

Read more less

fits : Ford Focus mk3 preface version 2010 - 2014   COMPLETE SET CONTAINS: -FRONT BUMPER   Please Note: By selecting “Add to cart” you are agreeing to the below statement!   All Maxton Design Fibreglass items, such as bumpers, Spoilers and spoiler extensions - as well as skirts will require “prep” before installing! These are not a simple “un-box & fit” modification. In transit, the items may get chipped or marked and as such prior to painting it is important you understand that the parts may require Filling, Sanding & Repairing prior to going to paint, which can be undertaken by any reputable body shop at minimal cost!  Return requests based on the reasons Above are not accepted so please be aware you have agreed to this statement And the definition of “Prep” prior to purchasing.      Product is made of Fiberglass. All parts are brand new. Material is weather resistant, will not deform in low and high temperatures. Parts made of Fiberglass characterize with increased strength and flexibility. Parts are unpainted. Buyer is advised to entrust the installation to an expert. Parts need to be prepared and trial fitted before painting.    This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

COMPLETE SET CONTAINS: FRONT BUMPER SPOILER Product is made of Fiberglass. Please Note: By selecting “Add to cart” you are agreeing to the below statement!   All Maxton Design Fibreglass items, such as bumpers, Spoilers and spoiler extensions - as well as skirts will require “prep” before installing! These are not a simple “un-box & fit” modification. In transit, the items may get chipped or marked and as such prior to painting it is important you understand that the parts may require Filling, Sanding & Repairing prior to going to paint, which can be undertaken by any reputable body shop at minimal cost!      Return requests based on the reasons Above are not accepted so please be aware you have agreed to this statement And the definition of “Prep” prior to purchasing.    All parts are brand new. Material is weather resistant, will not deform in low and high temperatures. Parts made of Fiberglass characterize with increased strength and flexibility. Parts are unpainted. Buyer is advised to entrust the installation to an expert. Parts need to be prepared and trial fitted before painting.   This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

COMPLETE SET CONTAINS: SPLITTER /FRONT BUMPER LIP SPOILER WITH TIE BARS Mounting kit (glue, screws) Mounting manual Splitter is in black colour, it's ready for mounting. No need of any additional work, unless you want to paint it for a different colour. Splitter lowers the car visually and improves the grip and vehicle stability.  Product is made of ABS plastic.  ABS material was created specifically for use in the automotive industry. ABS is used in production of factory bumpers and other car body parts. ABS products are characterized with increased strength and flexibility.   This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

COMPLETE SET CONTAINS: -SPLITTER /FRONT BUMPER LIP SPOILER WITH TIE BARS - Mounting kit (glue, screws) -Mounting manual Splitter is in black colour, it's ready for mounting.No need of any additional work, unless you want to paint it for a different colour.Splitter lowers the car visually and improves the grip and vehicle stability. Product is made of ABS plastic. ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility   This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

fits : Ford Focus mk3 ST preface model 2012 - 2014 COMPLETE SET CONTAINS:  -SPLITTER /FRONT BUMPER LIP SPOILER WITH TIE BARS - Mounting kit (glue, screws) - Mounting manual   Splitter is in black colour, it's ready for mounting.No need of any additional work, unless you want to paint it for a different colour.Splitter lowers the car visually and improves the grip and vehicle stability. Product is made of ABS plastic. ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility.   This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

fits : Ford Focus mk3 ST preface model 2012 - 2014   COMPLETE SET CONTAINS:   SLITTER /FRONT BUMPER LIP SPOILER WITH TIE BARS Mounting kit (glue, screws) Mounting manual   WITHOUT CANARDS !   Splitter is in black colour, it's ready for mounting.No need of any additional work, unless you want to paint it for a different colour.Splitter lowers the car visually and improves the grip and vehicle stability. Product is made of ABS plastic. ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility.   This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

its : FORD Fiesta mk7.5 ST with Maxton front bumper 2013 -   COMPLETE SET CONTAINS:   SPLITTER /FRONT BUMPER LIP SPOILER Mounting kit (glue, screws) Mounting manual   Splitter is in black colour, it's ready for mounting.No need of any additional work, unless you want to paint it for a different colour.Splitter lowers the car visually and improves the grip and vehicle stability. Product is made of ABS plastic. ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility.   This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

fits : Ford Focus mk3 ST preface model 2012 - 2014   COMPLETE SET CONTAINS: - SPLITTER /FRONT BUMPER LIP SPOILER - Mounting kit (glue, screws) - Mounting manual   Splitter is in black colour, it's ready for mounting.No need of any additional work, unless you want to paint it for a different colour.Splitter lowers the car visually and improves the grip and vehicle stability. Product is made of ABS plastic. ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility.   This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less