15% OFF ALL ELIGIBLE ITEMS IN OUR EASTER SALE - USE DISCOUNT CODE "EASTER24" AT CHECKOUT. VALID UNTIL 23:59 1ST APRIL.

Forge Motorsport Shop

1063 products

  • Induction Kit for the Ford Focus ST250 2015 onwards - Car Enhancements UK

    forge Motorsport Induction Kit for the Ford Focus ST250 2015 onwards

    Following a running change to the 2015 Ford Focus ST250, Forge have re-engineered this performance induction kit to suit. Quality CNC Mandrel bent alloy inlet pipe work with no joins, quality 4 ply silicone hoses, and a high performance PiperCross filter increase filtration and flow. As always we supply everything required for an easy installation. This kit is compatible with 2015 onwards cars fitted with the twist type induction sensor located on the intake pipework next to the airbox as shown below:

    £265.02

  • Forge Atmospheric Dump Valve for Ford Fiesta ST 180 Mk7 - Car Enhancements UK

    forge Motorsport Forge Atmospheric Dump Valve for Ford Fiesta ST 180 Mk7

    This valve is for the turbocharged 1.6-litre EcoBoost petrol engine found in the Fiesta ST. It is recommended for any vehicle where the boost pressure has or is going to be increased by an ECU software upgrade, Our alternative is a fully engineered solution, offering significantly improved reliability. Our valve and installation kit replaces the original unit with a pressure/vacuum operated piston valve, that still also retains the desirable OEM ECU control over valve actuation. This product has been thoroughly designed and tested with the expressed intent of offering improved valve response and maintaining ECU control while resulting in absolutely NO fault codes, NO check engine lights, and no adverse effects of any kind. All of the necessary components and detailed instructions are included and everything is designed to make installation as simple as possible.    In The Box:1 x FMDVST180 Valve1 x FMBGFK4 Boost Tap and Bolt1 x Solenoid, Bracket and Screws1 x Blue Spring (Uprated)1 x Wiring Harness2 x Posi-taps10 x Cable Ties1 x 2000mm Length of 4mm Vacuum Hose1 x Forge Key Ring and Sticker1 x Instruction Booklet

    £244.71

  • Forge Brake Hose Set for MK7 Fiesta ST - Car Enhancements UK

    forge Motorsport Forge Brake Hose Set for MK7 Fiesta ST

    A set of ultra-high performance brake hoses for the 2013 MK7 Ford Fiesta ST.Hosetechnik lines are hand-finished with Teflon-lined braided stainless steel bodies and custom-machined stainless fittings. They are available in no less than 12 hard-wearing PVC sleeve colours, which look amazing, and protect against dirt and water ingress.The hoses meet, or exceed, all current FMV. ADR, LTSA, DOT and TUV legislation, making these upgrades totally legal in any market.

    £92.60

  • Forge Blow Off Valve and Kit for the Ford Focus ST 225 MK2 - Car Enhancements UK

    forge Motorsport Forge Blow Off Valve and Kit for the Ford Focus ST 225 MK2

    A remote Blow off, or Dump Valve Kit for the Ford Focus Mk2 ST225. This uses a twin piston valve to ensure compatibility with the engine management system and a custom silicone hose to ensure easy installation. This valve can be installed in combination with the OEM valve, or on it's own by using one of our blanking plates. The hose is available in red, blue, or black, and the valve is available in black. Please select your choice from the options above.   In The Box:1 x FMFOCSTDV Valve1 x 35mm Hose Clamp1 x 50mm Hose Clamp1 x 500mm of 4mm Vacuum Tube1 x 5mm T Piece1 x Silicon Hose #10221 x Instructions1 x Forge Sticker

    £176.40

  • Hard Pipe for the Ford Fiesta 1.0T Ecoboost - Car Enhancements UK

    forge Motorsport Hard Pipe for the Ford Fiesta 1.0T Ecoboost

    1.0 Ecoboost intake hardpipe This Forge Motorsport mandrel bent aluminium pipe replaces the original Ford plastic pipe between the intake and turbo inlet, at the rear of the engine bay. Not only does it lift the appearance of the engine bay, but it also smoothes out the airflow and has a marginal increase in diameter to maximise the amount of air getting into the engine. Combine this with our 1.0 Ecoboost intake FMINDK5 for unrivalled noise and performance. 

    £144.26

  • Forge Induction Kit Focus ST250 (Pre Facelift) - Car Enhancements UK

    forge Motorsport Forge Induction Kit Focus ST250 (Pre Facelift)

    With Forge products the performance and quality always come first and this kit really goes out it's way to prove it. With a re-design of the inlet pipe work in alloy, and teaming up with the engineers at PiperCross, who have become famous for extracting extra horsepower on the British Touring Car circuit, we now have a kit which unleashed an extra 17 hp on our test car. As always we supply everything required for an easy installation. The silicone hose is available in a choice of blue or black, so simply select your choice below in the options, when ordering.

    £265.02

  • Braided Brake Lines for the Ford Focus RS MK3 - Car Enhancements UK

    forge Motorsport Braided Brake Lines for the Ford Focus RS MK3

    A set of ultra-high performance brake hoses for the Ford Focus RS MK3Hosetechnik lines are hand-finished with Teflon-lined braided stainless steel bodies and custom-machined stainless fittings. They are available in no less than 12 hard-wearing PVC sleeve colours, which look amazing, and protect against dirt and water ingress.The hoses meet, or exceed, all current FMV. ADR, LTSA, DOT and TUV legislation, making these upgrades totally legal in any market.

    £81.88

  • Upgraded Atmospheric Valve for the Mercedes A/CL/GLA45 (M133 Engine 355 BHP) - Car Enhancements UK

    forge Motorsport Upgraded Atmospheric Valve for the Mercedes A/CL/GLA45 (M133 Engine 355 BHP)

    This valve is an upgrade for the 2.0 turbocharged M133 DE20 LA (265 kW 355BHP version)  engine found in the Mercedes AMG A45 upto 2015. The engine as supplied by AMG has a port for a dump valve on the side of the turbo, but it is blanked off. Whilst this is fine for the stock level of tune, as the boost is turned up when the car is remapped, driveability can be effected and the car can stutter on hard acceleration, which ultimately will reduce the life of the turbo. Our valve bolts straight up to the turbo and is supplied with appropriate hardware in order to source vacuum to operate the valve. The valve features an aluminium piston for longevity, and is fully serviceable and can be rebuilt with a range of springs to suit your level of power. "Fitted to my Facelift A45 AMG. Takes some time to fit but once installed in my opinion is well worth it. Sounds great, loud enough to put a smile on your face but not intrusive or "ricery". Also a great add on for anyone going Stage 2. Thanks again ✌"   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

    £183.18

  • Induction Kit for Citroen DS3, Peugeot RCZ THP 156 and 207 GT/GTi - Car Enhancements UK

    forge Motorsport Induction Kit for Citroen DS3, Peugeot RCZ THP 156 and 207 GT/GTi

    The kit is suitable for the Citroen DS3 1.6 Turbo,the Peugeot RCZ THP 156 and the 207 GT/GTi  We use a custom designed Silicone Hose combined with a non-oiled Pipercross foam high flow filter . Everything needed is supplied in the kit, including the highest quality stainless steel clamps. Our Dyno testing of this kit showed improvements of 6 horsepower over the stock airbox on a standard engine with greater improvements on tuned vehicles. Whilst Power gains may vary depending on your modifications and level of tune, if you desire even more performance, this has to be the perfect choice. The filter is located directly in front of the cold air duct into the engine bay. This kit also significantly tidys up the engine bay by removal of the OEM airbox and associated cold air ducting. PLEASE NOTE: THIS PRODUCT WILL NOT FIT THE DS3 RACING

    £142.61

  • Alloy Boost Pipes for Peugeot 207 GTI and Citroen DS3 turbo - Car Enhancements UK

    forge Motorsport Alloy Boost Pipes for Peugeot 207 GTI and Citroen DS3 turbo

    A pair of mandrel bent Alloy boost pipes for the Peugeot 207 GTI and Citroen DS3 turbo. These have been designed to maximise flow and reduce the resistance of the original OEM fitment. Connecting hose available in red,blue,and black. Please select your choice in the options. Due to variations in fitment we supply alternative hoses within the kit.

    £241.99 - £268.99

  • Induction Kit for Hyundai i30N and Veloster N - Car Enhancements UK

    forge Motorsport Induction Kit for Hyundai i30N and Veloster N

    Forge Motorsport are excited to release our industry leading intake for the Hyundai i30N. This aftermarket cold air intake system improves your i30N’s airflow in several key ways. It routes the air more directly into your engine, using a huge 102 mm diameter CNC mandrel bent alloy pipe. The aftermarket system also improves the airflow by adding a high-flow, high efficiency air filter in place of the more restrictive factory air filter. Finally, the cold air intake system is set up to allow cooler air to easily flow into your engine The intake diameters on these air intakes have been carefully tuned to provide exactly the correct quantity of air ensuring solid consistent power gains throughout the rev range without any loss of low-end torque. The pipework is specifically designed to feed the turbo without interruption. The upshot to all of this is a gain of induction acoustics under acceleration, which improves the driving experience and adds a bit more drama to the Hyundai’s 2.0 four pot engine. As always filtration is important when developing an intake, so we once again turned to the industry leaders and Forge long term filtration partners Pipercross. With over 25 years’ experience in both the domestic and motorsport market they recommended a multi-layer foam construction filter, these filters work perfectly in our ‘Hi-Flow’ range. The large filter provided flows 60% more air than the stock filter. The intake is finished off with our unique black thermal powder coating. This kit comes with Forge’s usual detailed fitting guide to help make installation as easy as possible. Hyundai boast figures of 275bhp and 278lb.ft on their standard vehicle. When we ran our CAT backed performance exhaust development vehicle on the dyno with this intake it reached figures of 296bhp and 310lb.ft! Interestingly there has been lots of divided opinions about our intake requiring a heat shield. Testing took place with the bonnet shut and replicated wind speeds of around 70MPH. Intake temperatures were logged and monitored along with thermal images taken,. During this testing, we did not see the inlet pipe or intake temperatures rise; even after 4 hard pulls, the inlet temperatures stayed at a steady 30°C. Why not add gold tape to the underside of the aluminium housing to further reflect any heat soak from the engine. The Gold tape comes on a 5 metre roll allowing you to apply it to the underside of your Forge Motorsport product. In the Box:1 x Black Alloy Hard Pipe1 x Pipercross Filter1 x Valve Silicon Joiner2 x Hose clamps Please watch our video on how to fit an air filter without damaging it.   This interactive image was created with ThingLink.View this image on thinglink.com.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

    £362.27 - £385.80

  • Alloy Hard Pipe Kit for Renault Megane 225/230 - Car Enhancements UK

    forge Motorsport Alloy Hard Pipe Kit for Renault Megane 225/230

    An alloy and silicone replacement boost pipe kit for the Megane 225/230. The silicone couplers are available in a choice of red, blue, or black. Please note: In order to install this kit you will also require the hose with a  "T" piece connection (FMRMBHT) if you have a blow off valve connection or if you do not have a blow off valve, you will need a straight hose (FMRMBHS). These items must be ordered in addition to this kit. Please see the related items below. We are selling this kit in this way as many owners already have the blow off valve hose if they have a valve installed, or already have the straight hose if they have fitted a boost hose kit. In this hard pipe kit, the hoses and associated pipework are of 51mm diameter. This gives a big improvement on the restrictive 43mm standard pipes, which in places are quite restrictive.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

    £190.77 - £217.75

Login

Forgot your password?

Don't have an account yet?
Create account