30% OFF ALL REVO SOFTWARE IN MARCH. USE CODE *MODMARCH* AT CHECKOUT - INSTALL IN OUR BRADFORD HQ - click here

Maxton - Audi S6 C7 Facelift

14 products

  • REAR VALANCE AUDI S6/ A6 S-LINE C7 FACELIFT - Car Enhancements UK

    Maxton Design REAR VALANCE AUDI S6/ A6 S-LINE C7 FACELIFT

    Rear Valance Audi S6 / A6 S-Line C7 Facelift FITS ONLY:Audi S6 C7 Facelift Sedan / Avant (2015-2017)Audi A6 S-Line C7 Facelift Sedan / Avant (2014-2017)** Warning! We recommend changing the exhaust and exhaust tips! **** For diesel engines, the exhaust and exhaust tips must be changed! ** COMPLETE SET CONTAINS: - Rear Diffuser This product requires the removal of the original diffuser, self-tapping screws are needed to secure fitment of the new diffuser. Our full fitting manual can be found here: REAR DIFFUSER WITH CLIPS INSTALLATION MANUAL CHARACTERISTICS: Adds aesthetic value. Lightweight and offers some flexibility. This product is made from ABS plastic. The same material is used widely in the automotive industry. MORE INFORMATION: No additional work is required to finish the product. The product will arrive with a protective film.  Removal of the protective film will void any returns, only remove once you are certain the product will fit. We cannot be held responsible for the incorrect installation or use of this product. Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.  We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual. This product has been TUV MATERIALGUTACHTEN certified. The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

    £184.00

  • REAR SIDE DIFFUSERS AUDI S6/ A6 S-LINE C7 FL (2014-2017) - Car Enhancements UK

    Maxton Design REAR SIDE DIFFUSERS AUDI S6/ A6 S-LINE C7 FL (2014-2017)

    Rear Side Splitters Audi S6 / A6 S-Line C7 Facelift FITS ONLY:Audi S6 C7 Facelift Sedan / Avant (2015-2017)Audi A6 S-Line C7 Facelift Sedan / Avant (2014-2017)** Fits only with: AU-S6-C7F-AV-RS1 ** COMPLETE SET CONTAINS:-> Diffusers (Left+Right)Fitting manuals: REAR SIDE SPLITTERS INSTALLATION MANUAL Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure. We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our

    £94.00

  • FRONT SPLITTER AUDI A6 C7 S-LINE / S6 C7 FACELIFT (2014-2018) - Car Enhancements UK

    Maxton Design FRONT SPLITTER AUDI A6 C7 S-LINE / S6 C7 FACELIFT (2014-2018)

    Front Splitter V.1 Audi S6 / A6 S-Line C7 FL FITS ONLY:Audi S6 C7 Facelift Sedan / Avant (2015-2017)Audi A6 S-Line C7 Facelift Sedan / Avant (2014-2017) COMPLETE SET CONTAINS:-> Splitter/Front Bumper Lip Spoiler-> Mounting Kit-> Mounting Manual Fitting manual: FRONT SPLITTER INSTALLATION MANUAL Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our

    £184.00

  • FRONT SPLITTER AUDI S6/ A6 S-LINE C7 FACELIFT - Car Enhancements UK

    Maxton Design FRONT SPLITTER AUDI S6/ A6 S-LINE C7 FACELIFT

    FRONT SPLITTER AUDI S6/ A6 S-LINE C7 FACELIFT fits only: Audi S6 C7 Facelift Sedan/ Avant (2015- 2017)Audi A6 S-Line C7 Facelift Sedan/ Avant (2014- 2017) ** Before mounting, cut the lower part of the bumper **   COMPLETE SET CONTAINS:-> Splitter/Front Bumper Lip Spoiler Product is made of Fiberglass.All parts are brand new. Material is weather resistant, will not deform in low and high temperatures. Parts made of Fiberglass characterize with increased strength and flexibility. Parts are unpainted. Buyer is advised to entrust the installation to an expert. Parts need to be prepared and trial fitted before painting We can only accept a return within 14 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

    £307.01

  • FRONT RACING SPLITTER AUDI A6 C7 S-LINE (2 SPLITTERS = 1 SET) (2011-2014) - Car Enhancements UK

    Maxton Design FRONT RACING SPLITTER AUDI A6 C7 S-LINE (2 SPLITTERS = 1 SET) (2011-2014)

    FRONT SPLITTER AUDI A6 C7 S-LINE fits only : AUDI A6 C7 S-LINE 2011-2014   COMPLETE SET CONTAINS:    SPLITTER /FRONT BUMPER LIP SPOILER (CNC) + FRONT SPLITTER Hybrid structure : textured/gloss black/carbon look splitter + standard racing splitter  Mounting kit    Splitter is in black colour, it's ready for mounting.No need of any additional work, unless you want to paint it for a different colour.Splitter lowers the car visually and improves the grip and vehicle stability.Product is made of ABS plastic. ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility.   This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

    £254.02

  • SIDE SKIRTS DIFFUSERS AUDI A6 C7 S-LINE / S6 C7 FACELIFT (2014-2018) - Car Enhancements UK

    Maxton Design SIDE SKIRTS DIFFUSERS AUDI A6 C7 S-LINE / S6 C7 FACELIFT (2014-2018)

    Side Skirts Diffusers Audi A6 S-Line / S6 C7 FL FITS ONLY:Audi S6 C7 Facelift Sedan / Avant (2015-2017)Audi A6 S-Line C7 Facelift Sedan / Avant (2014-2017) COMPLETE SET CONTAINS:-> Side Skirt Splitters-> Mounting Kit-> Mounting Manual Fitting manual: SIDE SKIRT DIFFUSERS INSTALLATION MANUAL Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our

    £184.00

  • AUDI S6 C7 AVANT WIDE BODY + SET OF CARBON SPLITTERS - Car Enhancements UK

    Maxton Design AUDI S6 C7 AVANT WIDE BODY + SET OF CARBON SPLITTERS

    WIDE BODY + SET OF CARBON SPLITTERS AUDI S6 C7 AVANTfits: AUDI S6 C7 AVANT 2015-     COMPLETE SET CONTAINS:    FRONT SPLITTER - CARBON  FRONT FENDERS - Enlarges + 2.5cm on each side  REAR FENDERS - Enlarges + 5cm on each side    SIDE EXTENSIONS OF REAR BUMPER  SIDE SKIRTS - CARBON  REAR DIFFUSER - CARBON  REAR SPOILER Product is made of Fiberglass.All parts are brand new. Material is weather resistant, will not deform in low and high temperatures. Parts made of Fiberglass characterize with increased strength and flexibility. Parts are unpainted. Buyer is advised to entrust the installation to an expert. Parts need to be prepared and trial fitted before painting.This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

    £3,119.08

  • REAR SIDE DIFFUSERS AUDI S6/ A6 S-LINE C7 FACELIFT - Car Enhancements UK

    Maxton Design REAR SIDE DIFFUSERS AUDI S6/ A6 S-LINE C7 FACELIFT

    Rear Side Diffusers Audi S6 / A6 S-Line C7 Facelift FITS ONLY:Audi S6 C7 Facelift Sedan / Avant (2015-2017)Audi A6 S-Line C7 Facelift Sedan / Avant (2014-2017)** Fits only with: AU-S6-C7F-AV-RS1 **COMPLETE SET CONTAINS:-> Diffusers (Left + Right) Our fiberglass products are handmade. Please understand that this could mean the product requires adjustments before beginning the installation / painting process. If the product arrives with any scuff marks it will not affect the finish, as it is unpainted, and preparation needs to be completed first. Adjustments include: - Sanding – Essential - Priming – Essential - Shaping - Possible We always recommend taking such products to a professional body shop that specialises in or is familiar with fiberglass. Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

    £158.00

  • SIDE SKIRTS DIFFUSERS AUDI S6/ A6 S-LINE C7 FACELIFT - Car Enhancements UK

    Maxton Design SIDE SKIRTS DIFFUSERS AUDI S6/ A6 S-LINE C7 FACELIFT

    Side Skirts Diffusers Audi S6 / A6 S-Line C7 Facelift FITS ONLY:Audi S6 C7 Facelift Sedan / Avant (2015-2017)Audi A6 S-Line C7 Facelift Sedan / Avant (2014-2017)COMPLETE SET CONTAINS:-> Side Skirts Diffusers Our fiberglass products are handmade. Please understand that this could mean the product requires adjustments before beginning the installation / painting process. If the product arrives with any scuff marks it will not affect the finish, as it is unpainted, and preparation needs to be completed first. Adjustments include: - Sanding – Essential - Priming – Essential - Shaping - Possible We always recommend taking such products to a professional body shop that specialises in or is familiar with fiberglass. Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

    £413.00

  • CENTRAL REAR SPLITTER AUDI S6 C7 AVANT (WITHOUT VERTICAL BARS) - Car Enhancements UK

    Maxton Design CENTRAL REAR SPLITTER AUDI S6 C7 AVANT (WITHOUT VERTICAL BARS)

    Central Rear Splitter Audi S6 C7 Avant FITS ONLY:Audi S6 C7 Avant (2012-2014) COMPLETE SET CONTAINS:-> Central Rear Splitter Fitting manual: REAR CENTER SPLITTERS INSTALLATION MANUAL Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure. We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our

    £94.00

  • CENTRAL REAR SPLITTER AUDI S6 C7 AVANT (WITH VERTICAL BARS) - Car Enhancements UK

    Maxton Design CENTRAL REAR SPLITTER AUDI S6 C7 AVANT (WITH VERTICAL BARS)

    Central Rear Splitter (Vertical Bars) Audi S6 C7 Avant FITS ONLY:Audi S6 C7 Avant (2012-2014) COMPLETE SET CONTAINS:-> Central Rear Splitter Fitting manual: REAR CENTER SPLITTERS INSTALLATION MANUAL Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure. We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our

    £174.00

  • AUDI S6 C7 AVANT (CNC) REAR DIFFUSER & REAR SIDE SPLITTERS - Car Enhancements UK

    Maxton Design AUDI S6 C7 AVANT (CNC) REAR DIFFUSER & REAR SIDE SPLITTERS

    Rear Diffuser & Rear Side Splitters Audi S6 C7 Facelift FITS ONLY:Audi S6 C7 Facelift (2015-2017) COMPLETE SET CONTAINS: -> Rear Diffuser-> Splitters (Left + Right) Product is made of ABS plastic. ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

    £169.01

Login

Forgot your password?

Don't have an account yet?
Create account