Performance - Audi A1 GB (2019-Present)

Higher Output Ignition Coils.for all Volkswagen I Audi I Skoda I Seat with:1.0 TSI EA211 / 1.2 TSI EA211 /1.4 TSI EA211 / 1.4 Hybrid For your 1.0 / 1.2 / 1.4 TSI, RacingLine's Higher Output Ignition Coils deliver greater energy output, ensuring a stronger and more consistent spark. A simple plug-and-play upgrade over the OE factory coils.VWR900004 (individual coil pack) What do they do?The RacingLine Higher Output Ignition Coils are a direct plug-and-play upgrade from your OE ignition coils. Whether your engine is standard or Stage 3 tuned, it will immediately benefit from the greater energy output and stronger, more consistent spark generated by a set of RacingLine Coil Packs. The RacingLine Higher Output Ignition Coils deliver a 10% increase in output energy versus OE. This greater output is perfect for drivers looking to maximise output from either their stock or modified car.  Why have we settled on a 10% gain in output energy for our Coil Packs? Because this is the optimum increase level for VWG's smaller capacity TSI engines. Beyond this, no additional benefit is gained, yet the coil's internal temperatures begin to rise sharply. So, at this level, our Coil Packs can maintain coil voltage under load with little or no drop-off, performing consistently from idle through to the shift point or red-line. Replacement is all the more worthwhile on older engines still running the OE Coil Packs. A new set makes a great preventative maintenance upgrade to avoid the risk of misfires caused as the OE Coil Packs age and gradually break down. Fitment couldn't be easier. These are a simple plug and play replacement. Remove the OE Coil Packs, replace with our Higher Output versions. Confirmed applications VWR900004 – RED   All vehicles fitted with the following engines: 1.0 TSI : EA211 1.2 TSI : EA211 1.4 TSI : EA211 1.4 Hybrid : EA211 1.6 MPI : EA211   Sold individually.  Most popular models with these engines include: > VW Golf 8 & 8.5 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Up! GTI 2016+ > VW Up! 1.0 TSI 2016+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > VW Polo 5 6C/6R 2008-2018 > VW Polo 6 AW 2017+ > VW T-Cross 2017+ > Audi A1 2010-2018 > Audi A1 GB 2019+ > Audi A3 8Y & 8Y.2 2020+ > Audi A3 8V 2013-2020 > Audi Q3 2019+ > Audi Q2 2017+ > SEAT Ibiza 6J 2008-2017 > SEAT Ibiza 6F 2017+ > SEAT Leon 4 & 4.5 FW 2020+ > SEAT Leon III 5F 2015-2020 > SEAT Ateca 2016+ > SEAT Arona 2017+ > SEAT Toledo 2012+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+ > Skoda Fabia IV 2021+ > Skoda Karoq 2017+ > Skoda Rapid 2017+ > Skoda Kamiq 2019+ > Skoda Scala 2019+ > Skoda Kodiaq 2018+   What do Coil Packs do?A Coil Pack's function is to transform the car battery’s 12-volt output to a much higher voltage. This intensified electrical energy provides a more reliable source for your spark plug to function from, improving engine performance by igniting the fuel and air mixture more efficiently. We've spend a lot of our development time optimising the Coil Pack's energy levels to ensure operating temperatures are controlled. Over the lifecycle of our Coil Pack, this thermal management will help to prevent future break down.  Coil Packs that generate higher than 10% over OE will overheat and deteriorate over time. We've increased energy output gain to a level that will keep coils as cool as possible for as long as possible. This level of increase represents the 'sweet spot' of the diminishing returns of how much additional energy can benefit the spark strength versus the rapid increase in  internal temperatures for long term reliability and performance.

Read more less

Delivering lovely cool intake air temperatures for your Polo GTI 2.0 TSI AW & AW.2. Again and again and again. What does it do?The factory intercooler on the Polo GTI AW has proved to be unable to cope with the demands of higher power, hard driven cars, showing up as serious power losses during hard driving as air temperatures soar. Our massive 'plate & bar' Intercooler System uses a stepped core to give a 56% volume increase over the factory cooler - making it the best performing intercooler upgrade on offer for the MQB-A0 platform Polo GTI AW. By consistently reducing intake air temperatures (IAT), heat soak is minimised delivering increased performance again and again. No need for the recovery cool-down times needed for the production intercooler. Our development focussed on finding the ‘sweet spot’ of maximum IAT cooling versus minimum pressure loss. This has allowed us to achieve increased size without increased lag.  Fitment is specific for the Polo GTI AW - meaning no cutting, drilling or modifications to the crashrequired to fit. MAXIMUM CORE SIZE The massive 'plate & bar' intercooler unit features a high-speed stepped core using extra tall internal tubes for maximum boost flow and a 25% increase in frontal area. SOPHISTICATED CORE Highly effective aluminium plate & bar construction, developed following rigorous testing to optimise core dimensions, fin density, and pipe flow providing a 56% volume increase. SMOOTH END TANKS Cast construction end tanks for minimal turbulence and restriction delivering maximum flow across the entire core depth, with 60mm inlet & outlet. CONFIRMED APPLICATIONSVWR141001 VW POLO GTI AW 2017-2021 VW POLO GTI AW.2 2021+ AUDI A1 40 TFSI GB 2017+ OEM-fitment, requiring no drilling or cutting for perfect fitment. Giant core volume of 10,039,737mm³ vs 6,440,000mm³ for the OEM core. Don't confuse our 'Plate & Bar' construction with the cheaper and less-effective 'Tube & Fin' construction that most aftermarket intercoolers use. Intercooler outlets are 60mm - meaning stock boost pipes or our upgraded boost pipes can be used. INTERCOOLER PERFORMANCE.It's all about air intake temperatures. The OEM factory intercooler on the Polo GTI 2.0 TSI struggles with containing the all-important air intake temperatures once power is upgraded. So, intake air temperatures begin to rise rapidly, heat soak occurs, resulting in significant power losses the harder the car is used. The only way to recover the performance of the standard intercooler is to park the car for an hour. The RacingLine Intercooler makes a great difference in controlling IAT temperatures, meaning that your power increases keep on delivering, run after run.

Read more less

Lifetime warranty* The filter is manufactured to Forge’s specifications by Pipercross  Washable and reusable design. Layered multi-density foam technology. Designed and manufactured in Great Britain. Improvement in engine power and torque. Designed to flow stronger for longer. Fitting is straightforward and can be completed in 20-30 minutes. This kit requires no cutting or modification to the vehicle, allowing it to be reversed back to stock.   FMINDK39 is the long-awaited Forge induction kit for the VAG 1.0 TSI, including the Seat Ibiza Mk5. Our induction kit is an evolution of the FMINDK30 used for the VW UP! GTI. There are two key changes from that kit; the main and most important change is the incorporation of the OEM air duct which allows the kit to fit up to the original cold air ducting. The second alteration is the inclusion of a lid to the heat shield which has been selected to retain as much of the cold air flowing into the airbox as possible. After time spent on the dyno, we achieved gains of 5 bhp and 6lbft torque throughout the rev range which is extremely pleasing results not to mention the improved sound track our intake gives this punchy little 1.0 litre engine - higher gains can be expected from mapped cars. The Forge silicone hose has a larger bore and smooth finish inside giving optimum flow and comes in a choice of three colours: black, red, or grey. The construction of this hose has been engineered to exceed that of the OEM fitments and will enhance any car engine bay both technically and aesthetically. Why not add gold tape to the underside of the aluminium housing to further reflect any heat soak from the engine. The gold tape comes on a 5 metre roll allowing you to apply it to the underside of your Forge intake. Please note, if your engine looks like the picture below FMINDK39 and FMDV18 is not compatible. If your engine looks like the picture below, FMINDK39 and FMDV18 is compatible. CONFIRMED FITMENT AudiA1A1 (8X) 2010-20181.0 TSI 2015-2021 A1 (GB) 2018-1.0 TSISeatArona1.0 TSIAteca1.0 TSIIbizaMk5 (KJ) 2017 - late 20211.0 TSISkodaKodiaq1.0 TSIOctavia1.0 TSI (2018-2021)Scala1.0 TSIVolkswagenGolfMK71.0 TSIMK7.51.0 TSIPolo1.0 TSI T-Cross1.0 TSIT-Roc1.0 116PS

Read more less

With the success of FMINDK30 we took the opportunity to revisit the UP GTI and looked to see if we could improve on the 1.0 TSI air flow to the turbo charger. On investigation we could see that the OEM turbo adaptor was very restrictive and was an area in need for improvement. Therefore, our highly skilled development team got to work designing a solution to maximize the capacity by using our CAD system and physical prototypes. The OEM plastic turbo inlet includes a restrictive ribbed and hollow noise chamber that is designed to disturb the air flow and reduce induction noise, this OEM part has a detrimental effect to the engines performance especially when tuned. For the best possible gains, we removed the chamber allowing us to increase the volume and air flow significantly. Our hose design also has an internal stepped area where it is positioned and joined to the turbo housing, this is to ensure the transition is as smooth as possible from the inlet tract to the turbo. Several different designs and material choices were tested until we arrived with the product you see here. The construction of FMTIA3 is manufactured from reinforced multi ply silicone which is more durable than the OEM plastic pipe and it will also not suffer from heat soak like other similar products available. With its enlarged capacity and less restrictive surface area it routes air directly into your turbo charger and allows a greater volume of air to be compressed, this can have a positive effect on accelerating your vehicle after long deceleration or in between gear changes due to more air being kept within the inlet tract to the turbo charger. One significant feature of FMTIA3 is its compatibility with vehicles equipped with and without the PCV system integrated into the existing turbo intake, the early engines do not have the breather system in place from the fuel tank to the elbow. We supply the necessary hardware to blank of the elbow spouts if its required to fit the turbo inlet adaptor to the earlier engine revision The one way valve and coupler adaptor are also supplied so the elbow can be installed to the newer revised engine. The FMTIA3 is also compatible with the factory air box, however for the best performance results we recommend using our intake systems for your particular chassis application.   This is a product which is essential when tuning the 1.0 TSI engine, if its either stage one or stage two tuning we have seen consistent gains from 3-5 bhp depending on the vehicles state of tune. This is a straightforward yet very effective power increasing modification that can be fitted with basic tools and has a typical installation time of around 60 minutes. As with all Forge products it includes a full set of comprehensive installation instructions to make fitting as straightforward as possible. The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically Increased capacity  No engine check lights (EML) Increased air flow Lifetime warranty* FITS: >> AudiA1A1 (8X) 2010-20181.0 TSI 2015-2021 A1 (GB) 2018-1.0 TSIA31.0TSI>> SeatArona1.0 TSIIbizaMk5 (KJ) 2017 - late 20211.0 TSILeonMk3 2012-20201.0 TSI 2015-2020Toledo1.0 TSI >> SkodaFabiaNJ 2014-20211.0 TSI Octavia1.0 TSI (2018-2021)Rapid1.0 TSI>> VolkswagenGolfMK71.0 TSIMK7.51.0 TSIPolo1.0 TSI T-Roc1.0 116PSUp1.0 GTI/TSI

Read more less

Racingline Performance Silicone Boost Hose Set EA888 Gen4The RacingLine Gen.4 Boost Hose package is a three-piece kit to replace the factory soft flexible rubber hoses and replace them with our beautiful reinforced silicone replacement versions. The kit is a direct OEM replacement: simply remove the factory hoses, and replace them with the three uprated silicone pipes. Simple.Stepped internal joint transitions give a port-matched laminar airflow path, greatly reducing turbulence versus other non-stepped designs.Of course the RacingLine hoses are pressure tested far beyond the turbo’s capabilities, allowing the system to maintain performance under extreme temperature and high-boost conditions. By minimising these restrictions, the smoother airflow and optimised hose routing ensures that the turbo meets less resistance and can thus perform more effectively - moving a larger volume of air and minimising turbulence.Within the kit, the two Intercooler Boost Hoses have unique steel wire helix buried within the silicone construction to eliminate the very real risk of hose collapse, yet still allowing sufficient flexibility without wall distortion and minimising airflow blockage.A great upgrade for any remapped 2.0 TSI EA888 gen.4 car running higher boost than standard. Compatible with the following Vehicles:  > VW Golf 8 GTI 2020+> VW Golf 8 GTI Clubsport 2020+> VW Golf 8 R 2020+> VW Arteon R 2.0 TSI 320ps 2020+> VW T-Roc R 2.0 TSI 2021+> Audi S3 8Y 2020+> Audi A3 2.0 TSI 8Y 2020+> Audi TT 45 TFSI 2.0 TSI 8S 2021+> Audi SQ2 2.0 TSI EA888.4 2021+> Cupra Leon IV 300 TSI FW 2020+> Cupra Leon IV 245 TSI FW 2020+> Cupra Ateca 300PS EA888.4 2021+> Cupra Formentor 310PS 2020+> Cupra Formentor 245PS 2020+> Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+> Skoda Superb III 3V 2.0 TSI EA888.4 2020+> Skoda Kodiaq vRS 2.0 TSI EA888.4 2021+

Read more less

Upgraded Boost Pipe Kit.For all VWG MQB 2.0 TSI EA888 gen.4for higher output 300/310/320/333PS Continental TurboVWR140013 The RacingLine Boost Pipe Kit for 2.0 TSI MQB 'Evo' gen.4 (Continental turbo) delivers smooth, uninterrupted airflow to increase power and torque, replacing the restrictive, failure-prone factory boost pipes.For Golf mk8 R, GTI CS, Audi S3, Cupra Leon & Formentor & many more. This 3-piece RacingLine GEN.4 Boost Pipe kit for 2.0TSI EA888.4 high-output Continental turbo MQB 'Evo' cars deliver smooth, uninterrupted airflow to increase power and torque, replacing the restrictive failure-prone factory boost pipes. By promoting increased airflow throughout the charge flow path, along with removing boost-leak weak points, performance and reliability gains are guaranteed! The RacingLine Boost Pipe kit for 2.0 TSI gen.4 MQB "evo' delivers smooth, uninterrupted airflow to increase power and torque, replacing the restrictive, failure-prone factory boost pipes on all EA888 gen.4 higher output Continental turbo cars. The 3-piece Boost Pipe kit replaces the factory pipework between the turbocharger, the intercooler, and the throttle body with one-piece, mandrel-bent 6000 series aluminium tubes with thin wall 60mm OD for maximum smooth air flow. It’s by minimising the restrictions of the factory pipes and optimising the routing that this increased airflow is achieved. As well as giving enhanced turbocharger sound and faster spool, fitment of these Boost Pipes ensures that the turbo meets less resistance thus allowing it to perform more effectively - moving a larger volume of air and minimising turbulence. The RacingLine Boost Pipe Kit comprises three separate pieces. Two mandrel-bent hard-pipes for the turbo-intercooler and intercooler-throttle body chargepath, plus a reinforced turbo outlet Silicone Hose for the turbo outlet. The Boost Pipes themselves are formed from single piece, mandrel-bent 6000 series aluminium tube with thin wall 60mm OD. The silicone hose is hand-wound multi-ply over internal wire reinforcement, ensuring resistance to both heat and deformation. Meanwhile, barbed ends on the pipes ensure no risk of blow off, even under extreme boost pressure conditions. As you’d expect from RacingLine, each pipe is hand polished then anodised black with laser etched logos as the finishing touch - to look great in your engine bay, and stay looking great. As with all RacingLine products, perfect fitment is a priority. So, all the mounting brackets are carefully TIG welded to ensure dimensional perfection. And within each kit, RacingLine include a stainless steel Mikalor-brand clamp, OEM rubber mounting bobbins and new bolts to make sure you achieve the perfect installation. Install is direct OEM-replacement and requires no additional drilling or cutting to fit - meaning install is fully reversible. Finally, the Boost Pipes can be used with either factory rubber hoses or, for best results we'd highly recommend pairing them with the RacingLine Gen.4 Boost Hose Kit (VWR140006) APPLICATIONS:2.0 TSI / EA888 Gen.4 enginesContinental Turbo 300-333PSVWR140013 > VW Golf 8 & 8.5 R 2020+> VW Golf 8 & 8.5 GTI Clubsport 2020+> VW Arteon R 2.0 TSI 320ps 2020+> VW T-Roc R 2.0 TSI 2019+> VW Tiguan II R 2.0 TSI 320ps 2020+ > Audi S3 8Y & 8Y.2 2020+> Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+> Audi SQ2 (EA888.4) 2021+ > Cupra Leon 4 & 4.5 300 TSI FW 2020+> Cupra Ateca 300ps (EA888.4) 2021+> Cupra Formentor 310ps 2020+ > Skoda Superb III 3V 2.0 TSI (facelift EA888.4) 2021+  The RacingLine Boost Pipe Kit has three pieces: smooth aluminium mandrel-bent hard-pipes for the turbo-intercooler and intercooler-throttle body airflow, plus a reinforced turbo outlet Silicone Hose:      

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:70mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:76mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:83mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:90mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This filter is designed to be fitted to the outside of a rigid pipe such as a MAF sensor housing. These filters have an rubber polymer neck and a cone shaped filter element. This enables easy fitting to space-restricted engine compartments, whilst providing a large surface to maximise potential air flow. The filters are constructed using stainless steel cage internal and our famous 15mm thick twin layer foam.  Ramair universal filters are designed and manufactured for a very diverse range of applications and are made here in the UK. They are available in many different sizes and styles available.  Clean using our filter maintenance kit - CK-003 This product has the following dimensions: Filter Internal Neck Diameter: You choose Filter Neck Length: 23mm Filter Overall Height: 130mm Filter Base Width: 150mm Filter Top Width: 93mm Filter Material: 15mm Dual Layer Foam

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This filter is designed to be inserted into a flexible hose such as a rubber or silicone intake pipe. These filters have an aluminium ram-pipe neck and a cone shaped filter element. This integral cone channels all the incoming air, towards the inlet manifold, and in doing so, reduces unnecessary turbulence. These filters are also cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of pleated surface area an added boost of power to your engine too! These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of motorsport filtration the pleated range by Ramair is the premium choice on the market today for your fast road or track car. With its large size, technologically advanced filter and bell mouth alloy spun base this filter kit is capable of handling extremely large power & flow rates. Filter Outer Neck Diameter: Select Your Option Filter Neck Length: 45mm (1.8inch) Filter Overall Length: 185mm (7.3inch) Filter Base Width: 150mm (5.9inch) Filter Top Width: 120mm (4.7inch) Filter Material: Pleated Nanofibre Filter Base Material: Aluminium Filter Base Finish: Black Powder Coat

Read more less

This performance intake kit is designed to fit the Volkswagen, Audi, Seat and Skoda with 1.5 / 1.0 TSI engines Features Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions Mounts to standard factory mounting points and rubbers Easy to clean using our filter maintance kit - CK-003 What Will I Get? Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include: Black powder coated heat shield Ramair foam filter Black silicone intake pipe Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2017-2021 Skoda Octavia (MK3) 1.5 TSI 2018-2021 Audi Q2 (GA) 1.5 TSI 2018-2021 Audi A1 (GB) 1.5 TSI 2018-2021 Audi Q3 (F3) 1.5 TSI 2018-2021 Seat Arona (KJ) 1.5 TSI 2018-2021 Seat Ateca (KH) 1.5 TSI 2018-2021 Seat Leon (MK3) 1.5 TSI 2020-2025 Seat Leon (MK4) 1.5 TSI 2018-2021 Seat Tarraco (KN2) 1.5 TSI 2018-2021 Seat Ibiza (6F) 1.0 MPI 2018-2021 Seat Ibiza (6F) 1.5 TSI 2017-2021 Skoda Kamiq (NW) 1.5 TSI 2017-2021 Skoda Karoq (NU7/ND7) 1.5 TSI 2017-2021 Skoda Scala (NW) 1.5 TSI 2017-2021 Skoda Kodiaq (NS) 1.5 TSI 2017-2021 Skoda Superb (MK3) 1.5 TSI 2017-2021 VW Arteon (3H) 1.5 TSI 2020-2025 VW Golf (MK8) 1.5 eTSI 2020-2025 VW Golf (MK8) 1.5 TSI 2020-2021 VW T-Cross (MK1) 1.5 TSI 2017-2021 VW T-Roc (MK1) 1.5 TSI 2017-2021 VW Golf (MK7) 1.5 TSI 2017-2021 VW Touran (MK2) 1.5 TSI 2017-2021 VW Tiguan (AD/BW) 1.5 TSI 2017-2021 VW Tiguan Allspace (AD/BW) 1.5 TSI 2017-2021 VW Polo (AW) 1.0 MPI 2017-2021 VW Polo (AW) 1.5 TSI 2017-2021 VW Passat (3G) 1.5 TSI 2017-2021 Audi A3 (8V) 1.5 TFSI 2017-2021 Audi A3 (8V) 1.5 TSI 2020-2021 Audi A3 (8Y) 1.5 TSI 2020-2023 VW Caddy (MK4) 1.5 TFSI 2020-2023 VW Caddy (MK5) 1.5 TFSI  

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

The Only Thing You Need To Open Your Car Boot In One Kit  Automatically open your boot, making loading and unloading hassle-free.  The No.1 Brand for automatic boot struts.  One installation, a year-long guarantee or your money back.  Manufactured with high-grade materials, ensuring durability and long-lasting performance.  Fast, easy DIY installation.  Use your existing key, no coding, simply plug & play.

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

Check out our 4D Number Plate Tags, Designed to be fitted with 4D number plates (but can be fitted to any UK Number plate) Available in any colour you want, with an array of logo's; again, in any colour you want! These simply stick to the left side of your number plate using the pre applied weatherproof backing tape! The tags are only 50mm wide meaning they are 100% legal in terms of sizing under UK number plate law. This listing is for one pair (2 tags) Customise: You choose the colour of your tag! You choose the logo / emblem You choose the orientation of the logo You choose the colour of the logo! Options: We've created 2 sizes, Option 1 is for vehicles who do not use a number plate holder or frame of any kind and just have the plate on the car, this is designed to stick on the left side of the plate and cover it fully. Option 2 is for vehicles which have a number plate frame / holder - is designed a bit smaller so that it fits inside and still gives you the desired look (See disclaimer below) Measurements: Option 1: H 110mm // W 50mm // T 3mm Option 2: H 100mm // W 47mm // T 3mm Want something Custom? Drop us an email to support@ceuk.org and our design team would love to help! Dislciamer: The full size option may not follow the corners of your number plate and may be larger - this is designed to be universal and fit all number plates, it will always cover the corner completely The smaller option may have a 1-2mm border between the tag and your frame, as all frames are different sizes this has been designed to be universal - see photo  

Read more less

Check out our 4D Number Plate Tags, Designed to be fitted with 4D number plates (but can be fitted to any UK Number plate) Available in any colour you want, with an array of logo's; again, in any colour you want! These simply stick to the left side of your number plate using the pre applied weatherproof backing tape! The tags are only 50mm wide meaning they are 100% legal in terms of sizing under UK number plate law. This listing is for one pair (2 tags) Customise: You choose the colour of your tag! You choose the logo / emblem You choose the orientation of the logo You choose the colour of the logo! Options: We've created 2 sizes, Option 1 is for vehicles who do not use a number plate holder or frame of any kind and just have the plate on the car, this is designed to stick on the left side of the plate and cover it fully. Option 2 is for vehicles which have a number plate frame / holder - is designed a bit smaller so that it fits inside and still gives you the desired look (See disclaimer below) Measurements: Option 1: H 110mm // W 50mm // T 3mm Option 2: H 100mm // W 47mm // T 3mm Want something Custom? Drop us an email to support@ceuk.org and our design team would love to help! Dislciamer: The full size option may not follow the corners of your number plate and may be larger - this is designed to be universal and fit all number plates, it will always cover the corner completely The smaller option may have a 1-2mm border between the tag and your frame, as all frames are different sizes this has been designed to be universal - see photo  

Read more less

Introducing the Enhanced Edition LED H7 Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in ANY H7 Fitments and replaces the OEM lamp unit for an ultra bright replacement. This bulb can be used as a dipped & high beam upgrade as well as a foglight. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! No longer any need for clips & caps! The bulb is designed to fit in any H7 fixing without any adjustments or additional items, and utilising its 4 point technology, this can be orientated in either 2 or 4 location points to ensure the best output and zero polarity issues! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H7 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H7 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped & high beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H8 or H11 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H8/11 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

For hydraulic brake and clutch systems. Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3) Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual. Min. dry boiling point 260°C. Min. wet boiling point 165°C Notice Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs. Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water.  DOT 4 Technical Info Contents 500 ml Colour Pale Amber Chemical basis Butoxyethanol Shelf life from production 36 Month Min. wet boiling point 165 °C Min. dry boiling point 260 °C Density 1.052 g/ml Density conditions at 20°C pH value 7-11

Read more less

Compatible for: Audi -A1  A1 25/30 1.0 TSI/TFSI 2022- (GB) -A3 1.0 TSI (2022-) -Q2 1.0 TSI (2022-) Seat -Arona 1.0 TSI (2022-) -Ateca 1.0 TSI (2022-) -Ibiza    Mk5 (KJ) 2017 - late 2021  1.0 TSI              Mk5 (KJ) 2021-  1.0 TSI -Leon Mk4 2022-  1.0 TSI Skoda -Fabia PJ 2022- 1.0 TSI -Kamiq  1.0 TSI (2022-) -Karoq 1.0 TSI (2022-) -Octavia 1.0 TSI (2022-) -Scala 1.0 TSI (2022-) Volkswagen -Golf MK8  1.0 TSI (2022-) -Polo 1.0 TSI (2022-) -T-Cross 1.0 TSI (2022-) -T-Roc 1.0 TSI (2022-) -Taigo 1.0 TSI (2022-)   FMINDK52 is the Forge Motorsport cold air induction system for the 2022 onwards 1.0 TSI engine found in a large selection of vehicles from the VW, Audi, Skoda, and Seat range. With the highly successful FMINDK30 and FMINDK39 induction kits for the previous generation 1.0 TSI VAG vehicles there has been a large demand for Forge Motorsport to develop an improved air intake system for the latest VAG power unit.  As with all manufacturers in recent times, the need to make smaller capacity engines more powerful with better efficiency has been their top priority. To achieve these goals, the OEM design engineers must maximise the space to its fullest, which in turn creates more of a challenge for the aftermarket manufacturers and tuners to improve what is already fitted to the vehicle. Nonetheless, this has not stopped us at Forge Motorsport! Even with plenty of expertise from past developments with the previous small capacity VAG engines, this new power unit needed an extensive amount of testing time to ensure we produced a product that provided genuine improvements over the standard air box.  The CAD designed, laser cut, and precision folded heat shield is designed to form a barrier between the air inlet tract and radiant heat from the engine. It also helps duct the cold air to the air filter, to preserve low intake temperatures, which in-turn creates more power. Finished in our black textured powder coating, this creates a product with an OEM look and quality. This kit is offered with our Forge high flow, pleated, synthetic nanofiber filtration filter, which has been manufactured for optimum size and fit to the available space giving superior flow and filtration with enhanced breathing for the 1.0 turbo charged engine.   Alternatively, there is our foam filter option available soon that has been exclusively manufactured by Pipercross. During dyno testing we tried several filter options and we found that neither filter excelled over the other with results being almost identical throughout the rev range. Both the filters offered can be oiled by the end user to prevent fine dust commonly found in hot climates from entering the inlet tract. Testing was completed using Performance Remap in Gloucester with their VTEC 4 wheel drive dynamometer. This was to ensure all our data has been achieved with results as accurately as possible by an independent tuner.  The dyno graph below shows torque gains at 2600RPM all the way to redline, with a gain of nearly 10NM from between 3000RPM and 3500RPM. This gain is very beneficial as it is consistently higher than stock from turbo spool up through to full boost, resulting in noticeably sharper acceleration and a more exhilarating experience for the driver, as typically this is where true power gains can be felt when behind the wheel.   The Forge Motorsport induction kit FMINDK52 includes all the necessary hardware and step by step installation instructions for any car enthusiast with basic garage tools to fit at home, in just a couple of hours!  

Read more less

This product CAN NOT be used in conjunction with FMTIA13 FMINLH26 is our replacement intake hose for the 2022- VAG 1.0 TSI engine. This is a direct replacement for the original plastic inlet hose. This is a simple fitment which replaces the entire restrictive rear factory plastic ‘bellows’ pipe between the airbox and the turbocharger inlet.  Constructed from reinforced high quality 5 ply silicone, this hose offers increased rigidity to prevent deformation from engine movement or heat cycles. This product is offered in two colours, gloss black or bright red, so this hose is not only functional but it also improves the aesthetics of the TSI engine bay. Audi -A1  A1 25/30 1.0 TSI/TFSI 2022- (GB) -A3 1.0 TSI (2022-) -Q2 1.0 TSI (2022-) Seat -Arona 1.0 TSI (2022-) -Ateca 1.0 TSI (2022-) -Ibiza    Mk5 (KJ) 2017 - late 2021  1.0 TSI              Mk5 (KJ) 2021-  1.0 TSI -Leon Mk4 2022-  1.0 TSI Skoda -Fabia PJ 2022- 1.0 TSI -Kamiq  1.0 TSI (2022-) -Karoq 1.0 TSI (2022-) -Octavia 1.0 TSI (2022-) -Scala 1.0 TSI (2022-) Volkswagen -Golf MK8  1.0 TSI (2022-) -Polo 1.0 TSI (2022-) -T-Cross 1.0 TSI (2022-) -T-Roc 1.0 TSI (2022-) -Taigo 1.0 TSI (2022-)   This product takes about 10 minutes to install and like all our silicone products, is covered by our lifetime warranty.

Read more less

  Similar to many of the newer VAG engines, the latest 1.0 TSI power plant is not equipped with a diverter valve fitted as standard, Forge Motorsport has developed a twin piston dump valve that not only gives you a loud audible sound when lifting off the throttle, but also increases the throttle response during gear changes by reducing turbo lag. It has been designed to help the turbocharger maintain its rotational speed ready for when you accelerate, whilst also taking the strain away from the impeller. Without removing this stress from your turbo, it can lead to premature failure especially on remapped engines and modified vehicles.       This valve kit allows the fitment of our fast response blow off valve preventing turbo surge and prolonging the life of your engine’s turbocharger. The kit includes all the necessary hardware and step by step installation instructions for any car enthusiast with appropriate garage tools to fit at home, in just a couple of hours!  Due to the exposed position of the OEM boost pipe and the nature of heat cycle, the plastic that the OEM pipe is made from can deteriorate over time, becoming brittle and susceptible to boost leaks. This kit totally replaces this plastic pipe from turbo to manifold with a multi-ply silicone hose (available in a choice of red or black). Highlights: CNC machined billet couplers and components CNC machined twin piston Forge valve. Two hose options: red or black (Custom colours available but will incur a 50% non-refundable deposit and a lead time of 8-10 weeks) Forge Motorsports dump valve will not bring on any check engine lights (EML)  The hose has a quality inner lining of modified silicone known as 'Fluorosilicone'. This means that the hose will stay bright and vibrant and will not deteriorate over time. Forge Motorsport lined hoses are suitable to be used with modern long-life coolants, Organic Acid Technology coolants (O.A.T.) and oil mist. The construction of the hose has been engineered to exceed that of the OEM fitments, the Forge Motorsport hose will enhance any engine bay both technically and aesthetically. We cannot guarantee that this product will fit with all aftermarket intakes. Lifetime warranty We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner Audi-A1 A1 GB 25/30 1/0 TSI (2022-)-A3 1.0 TSI (2022-)-Q21.0 TSI (2022-) A1A1 (GB) 25/30 1.0 TSI (2022-) A31.0 TSI (2022-) Q21.0 TSI (2022-) Seat Arona 1.0 TSI (2022-) Ateca 1.0 TSI (2022-) Ibiza Mk5 (KJ) 2017 - late 2021 1.0 TSI Mk5 (KJ) 2021- 1.0 TSI Leon Mk4 2022- 1.0 TSI Skoda Fabia PJ 2022- 1.0 TSI Kamiq 1.0 TSI (2022-) Karoq 1.0 TSI (2022-) Octavia 1.0 TSI (2022-) Scala 1.0 TSI (2022-) Volkswagen Golf MK8 1.0 TSI (2022-) Polo 1.0 TSI (2022-) T-Cross 1.0 TSI (2022-) T-Roc 1.0 TSI (2022-) Taigo 1.0 TSI (2022-) This part will take approximately 1 hour to fit.  

Read more less