Performance - Audi A3 8V (2012-2020)

Rear Valance Audi A3 Sedan 8V Facelift (Version with single exhaust tips on both sides)   FITS ONLY:Audi A3 S-Line Sportback 8V 2013 - 2016 COMPLETE SET CONTAINS: -> Rear DiffuserCOLOUR:-> Gloss Black This product requires the removal of the original diffuser, self-tapping screws are needed to secure fitment of the new diffuser. CHARACTERISTICS: Adds aesthetic value. Lightweight and offers some flexibility. This product is made from ABS plastic. The same material is used widely in the automotive industry. MORE INFORMATION: No additional work is required to finish the product. The product will arrive with a protective film.  Removal of the protective film will void any returns, only remove once you are certain the product will fit. We cannot be held responsible for the incorrect installation or use of this product. Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.  We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual. This product has been TUV MATERIALGUTACHTEN certified. The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

Read more less

034Motorsport’s RS+ Adjustable MQB Solid Rear Sway Bar for Audi 8V A3/S3, F3 Q3, 8S TT/TTS Quattro, and Volkswagen MK7/7.5 Golf R, Sportwagen, and Alltrack is now available! The 034Motorsport Adjustable Solid Rear Sway Bar is made from a single piece of high-quality, solid 0.938” thick spring steel for maximum rigidity, and is designed to combat understeer while reducing body roll under hard cornering without negatively impacting comfort. Vehicle Fitment:  -Volkswagen   Arteon   Golf Mk7 -Audi   S3 (8V)   S3 (8Y)   A3 (8Y 2020-)   A3 (8V 12-20)   TT Mk3 (8S)   Q3 (Mk2 18-) -SEAT  CUPRA  -Ateca               -Tarraco               -Leon Mk3 (5F)               -Formentor -Skoda  Kodiaq  Octavia Mk3 (5E)  Superb (3V 2015-)   NOTE: this sway bar will not fit these vehicles: 8S TTRS 8V.5 RS3 8Y RS3 Mk8 Golf R 2025+ 8Y.5 Audi S3 Why choose the RS+ Rear Sway Bar over our Standard MQB AWD Rear Sway Bar?Our Standard MQB AWD Rear Sway Bar was designed to provide a neutral handling experience. It reduces understeer while allowing drivers to coax their car into oversteer as desired.The RS+ Rear Sway Bar ticks things up a notch, providing over 171% stiffer than the factory rear sway bar and an additional 70% stiffness over our Standard MQB AWD Rear Sway Bar. This additional stiffness is great for owners looking to maximize rear end rigidity, turn-in response, and better rotation—further reducing understeer and maximizing handling performance! Rate Increase Data: 034Motorsport RS+ vs. Factory Sway Bar 034Motorsport RS+ (Soft) - 144% Rate Increase vs. Factory Audi 8V S3/Mk7 Golf R (22.0mm x 3.0mm) Hollow Rear Sway Bar 034Motorsport RS+ (Stiff) - 171% Rate Increase vs. Factory Audi 8V S3/Mk7 Golf R (22.0mm x 3.0mm) Hollow Rear Sway Bar 034Motorsport Standard MQB AWD Sway Bar vs Factory Sway Bar 034Motorsport Standard MQB AWD Sway Bar (Soft) - 42% Rate Increase vs. Factory Audi 8V S3/Mk7 Golf R (22.0mm x 3.0mm) Hollow Rear Sway Bar 034Motorsport Standard MQB AWD Sway Bar (Stiff) - 70% Rate Increase vs. Factory Audi 8V S3/Mk7 Golf R (22.0mm x 3.0mm) Hollow Rear Sway Bar The 034Motorsport RS+ Adjustable MQB Rear Sway Bar can be used with or without an upgraded Front Sway Bar. For avid track enthusiasts or those looking for the sharpest cornering, our Front Sway Bar is recommended to be paired with our RS+ Rear Sway Bar upgrade. For those looking for the absolute most rear end rotation, the factory front sway bar should be retained.034Motorsport Sway Bar Kits feature maintenance-free polyurethane bushings with a Teflon and polyester liner designed to enhance sway bar response speed while minimizing noise, vibration, and harshness (NVH). This liner also results in an extended service life that allows these bushings to even outlast your vehicle. With no need for additional lubrication, these bushings offer reliable, long-lasting performance without the hassle of regular maintenance and greasing. Built to withstand extreme conditions, the bushings are hydrophobic, heat-resistant up to 500°F, and resistant to water and common automotive chemicals. These bushings are covered by a limited lifetime warranty which covers material cracking, separation of the Teflon liner and polyurethane bushing, or squeaking under normal street or track conditions. Features: Manufactured From High-Quality, Solid, 0.938” Spring Steel Two Positions for Adjustability Based on Driver Preference Sway Bar Rate Data: 034Motorsport (Soft) - 144% Rate Increase vs. vs. Factory Audi 8V S3/Mk7 Golf R (22.0mm x 3.0mm) Hollow Rear Sway Bar 034Motorsport (Stiff) - 171% Rate Increase vs. Factory Audi 8V S3/Mk7 Golf R (22.0mm x 3.0mm) hollow rear sway bar Attractive Black Powdercoat for Protection From the Elements Beautiful Billet CNC Brackets With Clear Anodizing for Protection From The Elements Locating Collars To Prevent the Sway Bar From Walking Side to Side Greaseless, Maintenance Free, Teflon Lined Polyurethane Bushings Teflon and Polyester Composition Liner That Virtually Eliminates Noise, Vibration and Harshness (NVH). Improves Sway Bar Response Speed Extended Service Life No Additional Lubricant Needed, and Should Not Be Added Hydrophobic and Waterproof, Will Not Absorb Water or Be Affected In Even The Wettest Environments Is Not Chemically Reactive and Will Not Be Affected By Common Chemicals Present In The Automotive Environment Heat Resistant, Can Operate Continuously At Temperature Up to 500°F, Much Higher Than What Any Bushing Would See Limited Lifetime Warranty, Covering Manufacture Defects: Material Cracking Separation Of Teflon Liner and Polyurethane Bushing Squeaking Under Normal (Street/Track) Conditions. What's Included: 034Motorsport MQB AWD RS+ Adjustable Solid Rear Sway Bar Teflon Lined Polyurethane Sway Bar Bushings Billet Aluminum Sway Bar Brackets Sway Bar Bracket Installation Hardware Kit  

Read more less

MST Heat Shield Clear Top Cover - This only for customers who already own MST Intake Kit.   Please see below for compatible vehicles:   MST-VW-MK777 MST-VW-MK777V2 Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2012-2021 Audi A3 (8V) 1.8 TFSI 2015-2021 Audi TT (FV) 1.8 TFSI 2013-2021 Seat Leon (MK3) 1.8 TSI 2013-2021 Skoda Octavia (MK3) 1.8 TSI 2015-2021 Skoda Superb (MK3) 1.8 TSI 2015-2021 VW Touran (MK2) 1.8 TSI 2015-2021 VW Passat (3G) 1.8 TSI 2016-2021 Audi S3 (8V) 2.0 TFSI 2018-2021 Audi SQ2 (GA) 2.0 TFSI 2018-2021 Audi Q3 (F3) 2.0 TFSI 2012-2021 Audi A3 (8V) 2.0 TFSI 2014-2021 Audi TT (FV) 2.0 TFSI 2014-2021 Audi TTS (FV) 2.0 TFSI 2018-2021 Seat Ateca Cupra (KH) 2.0 TSI 2014-2021 Seat Leon Cupra (MK3) 2.0 TSI 2019-2021 Skoda Karoq (NU7/ND7) 2.0 TSI 2015-2021 Skoda Superb (MK3) 2.0 TSI 2013-2021 Skoda Octavia RS (MK3) 2.0 TSI 2017-2021 VW Arteon (3H) 2.0 TSI 2016-2021 VW Tiguan (AD/BW) 2.0 TSI 2013-2021 VW Golf (MK7) 2.0 TSI 2015-2021 VW Passat (3G) 2.0 TSI 2017-2021 VW Tiguan Allspace (AD/BW) 2.0 TSI 2013-2021 VW Golf GTi (MK7) 2.0 TSI 2016-2021 VW Golf GTi Clubsport (MK7) 2.0 TSI 2019-2021 VW Golf GTi TCR (MK7) 2.0 TSI 2019-2021 VW T-Roc R (MK1) 2.0 TSI 2013-2021 VW Golf R (MK7) 2.0 TSI

Read more less

This is a performance enhancing air scoop for the MK8 Golf GTI EA888 EVO 4 engine. Features Can be be fitted in conjunction with the factory air intake system Perfect when installed alongside with our MST Performance Intake System More pronounced intake sound Features twin air tunnels instead of just one on the factory system What Does It Do? This performance air intake scoop delivers increased air flow over the standard restrictive part. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black powdercoated intake scoop Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2012-2021 Audi A3 (8V) 1.8 TFSI 2015-2021 Audi TT (FV) 1.8 TFSI 2013-2021 Seat Leon (MK3) 1.8 TSI 2013-2021 Skoda Octavia (MK3) 1.8 TSI 2015-2021 Skoda Superb (MK3) 1.8 TSI 2015-2021 VW Touran (MK2) 1.8 TSI 2015-2021 VW Passat (3G) 1.8 TSI 2016-2021 Audi S3 (8V) 2.0 TFSI 2018-2021 Audi SQ2 (GA) 2.0 TFSI 2018-2021 Audi Q3 (F3) 2.0 TFSI 2012-2021 Audi A3 (8V) 2.0 TFSI 2014-2021 Audi TT (FV) 2.0 TFSI 2014-2021 Audi TTS (FV) 2.0 TFSI 2018-2021 Seat Ateca Cupra (KH) 2.0 TSI 2014-2021 Seat Leon Cupra (MK3) 2.0 TSI 2019-2021 Skoda Karoq (NU7/ND7) 2.0 TSI 2015-2021 Skoda Superb (MK3) 2.0 TSI 2013-2021 Skoda Octavia RS (MK3) 2.0 TSI 2017-2021 VW Arteon (3H) 2.0 TSI 2016-2021 VW Tiguan (AD/BW) 2.0 TSI 2013-2021 VW Golf (MK7) 2.0 TSI 2015-2021 VW Passat (3G) 2.0 TSI 2017-2021 VW Tiguan Allspace (AD/BW) 2.0 TSI 2013-2021 VW Golf GTi (MK7) 2.0 TSI 2016-2021 VW Golf GTi Clubsport (MK7) 2.0 TSI 2019-2021 VW Golf GTi TCR (MK7) 2.0 TSI 2019-2021 VW T-Roc R (MK1) 2.0 TSI 2013-2021 VW Golf R (MK7) 2.0 TSI 2020-2025 VW Golf R (MK8) 2.0 TSI 2022-2025 Skoda Superb (MK3) 2.0 TSI 2020-2025 VW Tiguan R (AD/BW) 2.0 TSI

Read more less

This is a performance enhancing induction kit for the EA888 Gen 3 VAG engines. For a full list of compatible vehicles please see fitment compatibility chart. Features Improved throttle response Black powdercoated heat shield and inlet pipe Dyno results: max gains 12-14bhp (this may vary dependant on vehicle) Easy to maintain dry pleated filter Cold air straight to the turbo charger What Does It Do? This induction kit delivers increased air flow and induction noise over the standard restrictive air box. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black powdercoated heat shield Black silicone 3" inlet pipe 3" red pleated filter Oversize 3" turbo inlet elbow Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2012-2021 Audi A3 (8V) 1.8 TFSI 2015-2021 Audi TT (FV) 1.8 TFSI 2013-2021 Seat Leon (MK3) 1.8 TSI 2013-2021 Skoda Octavia (MK3) 1.8 TSI 2015-2021 Skoda Superb (MK3) 1.8 TSI 2015-2021 VW Touran (MK2) 1.8 TSI 2015-2021 VW Passat (3G) 1.8 TSI 2016-2021 Audi S3 (8V) 2.0 TFSI 2018-2021 Audi SQ2 (GA) 2.0 TFSI 2018-2021 Audi Q3 (F3) 2.0 TFSI 2012-2021 Audi A3 (8V) 2.0 TFSI 2014-2021 Audi TT (FV) 2.0 TFSI 2014-2021 Audi TTS (FV) 2.0 TFSI 2018-2021 Seat Ateca Cupra (KH) 2.0 TSI 2014-2021 Seat Leon Cupra (MK3) 2.0 TSI 2019-2021 Skoda Karoq (NU7/ND7) 2.0 TSI 2015-2021 Skoda Superb (MK3) 2.0 TSI 2013-2021 Skoda Octavia RS (MK3) 2.0 TSI 2017-2021 VW Arteon (3H) 2.0 TSI 2016-2021 VW Tiguan (AD/BW) 2.0 TSI 2013-2021 VW Golf (MK7) 2.0 TSI 2015-2021 VW Passat (3G) 2.0 TSI 2017-2021 VW Tiguan Allspace (AD/BW) 2.0 TSI 2013-2021 VW Golf GTi (MK7) 2.0 TSI 2016-2021 VW Golf GTi Clubsport (MK7) 2.0 TSI 2019-2021 VW Golf GTi TCR (MK7) 2.0 TSI 2019-2021 VW T-Roc R (MK1) 2.0 TSI 2013-2021 VW Golf R (MK7) 2.0 TSI

Read more less

This is a performance enhancing induction kit for the VAG 1.2 & 1.4 TSI TFSI EA211 engine. This may fit other VAG vehicles with this engine, please see vehicle fitment compatibility chart. Features Improved throttle response Reduced turbo lag Turbocharger feels more responsive Enhanced BOV sounds What Does It Do? This induction kit delivers increased air flow over the standard restrictive part. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black powdercoated turbo inlet pipe Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2014-2018 Audi A1 (8X) 1.2 TFSI 2014-2019 Skoda Octavia (MK3) 1.2 TSI 2014-2019 Seat Toledo (KG) 1.2 TSI 2014-2019 Seat Leon (MK3) 1.2 TSI 2014-2019 Seat Ibiza (6J/6P) 1.2 TSI 2014-2019 Skoda Rapid (NH) 1.2 TSI 2014-2019 Skoda Yeti (5L) 1.2 TSI 2014-2019 Skoda Fabia (NJ) 1.2 TSI 2014-2019 VW Golf (MK7) 1.2 TSI 2014-2019 VW Touran (MK2) 1.2 TSI 2014-2019 VW Beetle (A5) 1.2 TSI 2014-2019 VW Caddy (MK4) 1.2 TSI 2014-2019 VW Polo (6R/6C) 1.2 TSI 2014-2019 VW Jetta (A6) 1.2 TSI 2014-2019 Audi A3 (8V) 1.2 TSI 2014-2019 Audi Q3 (8UB/8UG) 1.4 TFSI 2014-2018 Audi A1 (8X) 1.4 TFSI 2014-2019 Audi Q2 (GA) 1.4 TFSI 2014-2019 Audi A3 (8V) 1.4 TFSI 2014-2019 Seat Toledo (KG) 1.4 TSI 2014-2019 Seat Alhambra (MK2) 1.4 TSI 2014-2019 Seat Ateca (KH) 1.4 TSI 2014-2019 Seat Leon (MK3) 1.4 TSI 2014-2019 Seat Ibiza (6J/6P) 1.4 TSI 2014-2019 Skoda Octavia (MK3) 1.4 TSI 2014-2019 Skoda Superb (MK3) 1.4 TSI 2014-2019 Skoda Rapid (NH) 1.4 TSI 2014-2019 Skoda Yeti (5L) 1.4 TSI 2014-2019 Skoda Fabia VRS (NJ) 1.4 TSI 2014-2019 Skoda Kodiaq (NS) 1.4 TSI 2014-2019 VW Golf (MK7) 1.4 TSI 2014-2019 VW Tiguan (5N) 1.4 TSI 2014-2019 VW Tiguan (AD/BW) 1.4 TSI 2014-2019 VW Tiguan Allspace (AD/BW) 1.4 TSI 2014-2019 VW Passat (3G) 1.4 TSI 2014-2019 VW Beetle (A5) 1.4 TSI 2014-2019 VW Caddy (MK4) 1.4 TSI 2014-2019 VW Passat (CC) 1.4 TSI 2014-2019 VW Polo (6R/6C) 1.4 TSI 2014-2019 VW Touran (MK2) 1.4 TSI 2014-2019 VW Polo Blue GT (6R/6C) 1.4 TSI 2014-2019 VW Scirocco (MK3) 1.4 TSI 2014-2019 VW Sharan (MK2) 1.4 TSI 2014-2019 VW Jetta (A6) 1.4 TSI

Read more less

This is a performance silicone intake hose for 1.2 & 1.4 TSI TFSI EA211 engine. This kit fits other VAG vehicles with this engine, please see vehicle fitment compatibility chart. Features Improved throttle response Silicone inlet pipe Dyno results: max gains 5-7bhp (this may vary dependant on vehicle) What Does It Do? This induction silicone intake hose delivers increased air flow over the standard restrictive part. Whether this hose is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black silicone inlet pipe Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2014-2018 Audi A1 (8X) 1.2 TFSI 2014-2019 Skoda Octavia (MK3) 1.2 TSI 2014-2019 Seat Toledo (KG) 1.2 TSI 2014-2019 Seat Leon (MK3) 1.2 TSI 2014-2019 Seat Ibiza (6J/6P) 1.2 TSI 2014-2019 Skoda Rapid (NH) 1.2 TSI 2014-2019 Skoda Yeti (5L) 1.2 TSI 2014-2019 Skoda Fabia (NJ) 1.2 TSI 2014-2019 VW Golf (MK7) 1.2 TSI 2014-2019 VW Touran (MK2) 1.2 TSI 2014-2019 VW Beetle (A5) 1.2 TSI 2014-2019 VW Caddy (MK4) 1.2 TSI 2014-2019 VW Polo (6R/6C) 1.2 TSI 2014-2019 VW Jetta (A6) 1.2 TSI 2014-2019 Audi A3 (8V) 1.2 TSI 2014-2019 Audi Q3 (8UB/8UG) 1.4 TFSI 2014-2018 Audi A1 (8X) 1.4 TFSI 2014-2019 Audi Q2 (GA) 1.4 TFSI 2014-2019 Audi A3 (8V) 1.4 TFSI 2014-2019 Seat Toledo (KG) 1.4 TSI 2014-2019 Seat Alhambra (MK2) 1.4 TSI 2014-2019 Seat Ateca (KH) 1.4 TSI 2014-2019 Seat Leon (MK3) 1.4 TSI 2014-2019 Seat Ibiza (6J/6P) 1.4 TSI 2014-2019 Skoda Octavia (MK3) 1.4 TSI 2014-2019 Skoda Superb (MK3) 1.4 TSI 2014-2019 Skoda Rapid (NH) 1.4 TSI 2014-2019 Skoda Yeti (5L) 1.4 TSI 2014-2019 Skoda Fabia VRS (NJ) 1.4 TSI 2014-2019 Skoda Kodiaq (NS) 1.4 TSI 2014-2019 VW Golf (MK7) 1.4 TSI 2014-2019 VW Tiguan (5N) 1.4 TSI 2014-2019 VW Tiguan (AD/BW) 1.4 TSI 2014-2019 VW Tiguan Allspace (AD/BW) 1.4 TSI 2014-2019 VW Passat (3G) 1.4 TSI 2014-2019 VW Beetle (A5) 1.4 TSI 2014-2019 VW Caddy (MK4) 1.4 TSI 2014-2019 VW Passat (CC) 1.4 TSI 2014-2019 VW Polo (6R/6C) 1.4 TSI 2014-2019 VW Touran (MK2) 1.4 TSI 2014-2019 VW Polo Blue GT (6R/6C) 1.4 TSI 2014-2019 VW Scirocco (MK3) 1.4 TSI 2014-2019 VW Sharan (MK2) 1.4 TSI 2014-2019 VW Jetta (A6) 1.4 TSI

Read more less

Please note: spacers are sold as PAIRS! if you want to do front and rear than qty x2 is needed! Even better driving dynamics and more exciting looks: H&R TRAK+ wheel spacers make your car even sportier! By moving the wheel out from the hub, TRAK+ wheel spacers widen the stance of the vehicle and lower its roll center. This simple modification increases lateral stability, which in turn provides improved handling, greater safety and of course, the sleek style you’ve been looking for. Like all of H&R’s street-engineered products, H&R TRAK+ wheel spacers are certified by the German Technical Inspection Agency (TÜV). H&R also has the correct wheel bolts or nuts to install TRAK+ wheel spacers on most cars, with original or aftermarket wheels. 40mm overall Axle spacers High strength, light weight aluminum/magnesium alloy CNC machined Anodized for optimum corrosion protection Available for most domestic and imported automobiles For use with original or aftermarket wheels (Studs may need shortening if aperture in rear of alloy wheel is not sufficient for clearance) Compatible with all suspension designs TUV approved SPECIFICATIONS Track widening per axle [mm] 40 Thickness [mm] 20 Number of Holes 5.0 Bolt Hole Circle Ø [mm] 112 Centering Diameter [mm] 57.1 Colour Black Registration Type with TÜV® certificate   Please note, Due to the nature and complexity of a wheel spacer, customers MUST know that the size they are ordering is correct prior to ordering by measuring your stud length and wheel groove depth. Unfortunately, if over tightened the integrity of the spacer and / or bolts can be compromised - and due to this, any spacer that has been fitted, trial fitted or removed from its packaging can not be returned! Please be aware of this as by ordering you agree to this!

Read more less

  THIS IS BRAND NEW UNUSED ON CLEARANCE Beautifully crafted from the highest quality 3K carbon, the Revo Carbon Series is much more than a visual enhancement. Designed to directly replace restrictive OEM components, the Carbon Series has performance woven in to the core of every product.   REVO CARBON SERIES - AIR INTAKE SYSTEM The Revo Carbon Series Air Intake System for the 2.0 & 1.8TSI offers unparalleled performance benefits along with a striking visual addition to your engine bay. The full kit, which comes complete with a matching Carbon Series front scoop, lid, back-pipe and Pro-Panel filter completely replaces any restrictive elements of the OEM intake system, decreasing turbulence and allowing a larger volume of air to reach the turbo more quickly KEY FEATURES Increased Performance Improves Air Flow Efficiency Carbon Series Quality Replaces Restrictive Stock Turbo Elbow Engineered for both LHD and RHD Fitment 16% Larger Air Box Outlet     FULL KIT INCLUDES 90mm Turbo Inlet Hose Machined Inlet Carbon Air Box Lid ProPanel Air Filter Carbon Front Section Coolant Relocation Hose RESEARCH AND DEVELOPMENT All Revo products are designed in-house, allowing our team of engineers to rigorously test products during the design process. Only Revo offers a kit with a 16% larger lid outlet and matching hose, ensuring maximum performance at even Stage 3 and above specification.   GRAPHS To ensure this product would meet our exacting standards and performance, we carried out controlled testing on a Stage 4 Skoda Octavia VRS 2.0TSI running Shell vPower pump fuel on an in-house Dynapak hub dyno. With impressive results in comparison to the standard set up, peak results showed up to +41 WHP and +42 NM over stock with an average of +19whp and +25NM throughout the rev range.     VEHICLE APPLICATIONS   Manufacturer Model Engine Year Audi A3 (8V) 1.8 / 2.0 TFSI 12 - Audi S3 (8V)/td> 2.0 TFSI 12 - Audi TT (MK3) 2.0 TFSI 15 - Audi TTS (MK3) 2.0 TFSI 15 - Seat Leon (MK3) 1.8 / 2.0 TSI 12 - Skoda Octavia (MK3) 1.8 / 2.0 TFSI 12 - Skoda Superb 2.0 TSI 15 - Seat Ibiza Cupra 1.8 TSI 15 - Volkswagen Golf (MK7) 2.0 TSI GTI 14 - Volkswagen Golf (MK7) 2.0 TSI R 14 - Volkswagen Golf (MK7) 1.8 TSI 12 - * Fitments for 1.8 TSI & 2.0 TSI Engines with IHI IS20 and IS38 Turbos INDIVIDUAL PRODUCTS Carbon SeriesCarbon Lid & Hose Kit Carbon SeriesCarbon Scoop Carbon Series Secondary Breather Revo Carbon Series air intake systems perform beautifully. Designed to function no matter the power, Carbon Series intakes look great because of their effective design.

Read more less

Make Model Sub-Model Engine Engine Type BHP Year Special Comments Front Brake Caliper Type AUDI A3 8V 1.4 Turbo and Electric 204 2014-2020 TRW AUDI A3 8V 1.5 Turbo 150 2018-2020 TRW AUDI A3 8V 1.8 Turbo 180 2012-2020 TRW AUDI A3 8V 2.0 Turbo Diesel 150 2012-2020 TRW AUDI A3 8V 2.0 Turbo Diesel 150 2012-2020 TRW AUDI A3 8V 2.0 Turbo Diesel 184 2013-2020 TRW AUDI A3 quattro 8V 1.8 Turbo 180 2012-2020 TRW AUDI A3 quattro 8V 2.0 Turbo 190 2016-2020 TRW AUDI A3 quattro 8V 2.0 Turbo 190 2016-2020 TRW AUDI A3 quattro 8V 2.0 Turbo Diesel 150 2012-2020 TRW AUDI A3 quattro 8V 2.0 Turbo Diesel 150 2012-2020 TRW AUDI A3 quattro 8V 2.0 Turbo Diesel 184 2013-2020 TRW AUDI A3 Cabriolet 8V 1.8 Turbo 180 2014-2020 TRW AUDI A3 Cabriolet 8V 2.0 Turbo 190 2016-2020 TRW AUDI A3 Cabriolet 8V 2.0 Turbo Diesel 150 2014-2020 TRW AUDI A3 Cabriolet 8V 2.0 Turbo Diesel 150 2014-2020 TRW AUDI A3 Cabriolet quattro 8V 1.8 Turbo 180 2014-2020 TRW AUDI A3 Cabriolet quattro 8V 2.0 Turbo 190 2016-2020 TRW AUDI A3 Cabriolet quattro 8V 2.0 Turbo Diesel 150 2014-2020 TRW AUDI A3 Cabriolet quattro 8V 2.0 Turbo Diesel 150 2014-2020 TRW

Read more less

Make Model Sub-Model Engine Engine Type BHP Year Special Comments Front Brake Caliper Type AUDI A3 8V 1.4 Turbo and Electric 204 2014-2020 TRW AUDI A3 8V 1.5 Turbo 150 2018-2020 TRW AUDI A3 8V 1.8 Turbo 180 2012-2020 TRW AUDI A3 8V 2.0 Turbo 190 2016-2020 TRW AUDI A3 8V 2.0 Turbo 190 2016-2020 TRW AUDI A3 8V 1.6 Turbo Diesel 110 2012-2020 TRW AUDI A3 8V 2.0 Turbo Diesel 110 2013-2020 TRW AUDI A3 8V 2.0 Turbo Diesel 143 2012-2020 TRW AUDI A3 8V 2.0 Turbo Diesel 150 2012-2020 TRW AUDI A3 8V 2.0 Turbo Diesel 184 2013-2020 TRW AUDI A3 quattro 8V 1.8 Turbo 180 2012-2020 TRW AUDI A3 quattro 8V 2.0 Turbo 190 2016-2020 TRW AUDI A3 quattro 8V 2.0 Turbo 190 2016-2020 TRW AUDI A3 quattro 8V 2.0 Turbo Diesel 150 2012-2020 TRW AUDI A3 quattro 8V 2.0 Turbo Diesel 184 2013-2020 TRW AUDI A3 Cabriolet 8V 1.4 Turbo 125 2014-2020 TRW AUDI A3 Cabriolet 8V 1.4 Turbo 140 2014-2020 TRW AUDI A3 Cabriolet 8V 1.8 Turbo 180 2014-2020 TRW AUDI A3 Cabriolet 8V 2.0 Turbo 190 2016-2020 TRW AUDI A3 Cabriolet 8V 1.6 Turbo Diesel 110 2014-2020 TRW AUDI A3 Cabriolet 8V 2.0 Turbo Diesel 150 2014-2020 TRW AUDI A3 Cabriolet quattro 8V 1.8 Turbo 180 2014-2020 TRW AUDI A3 Cabriolet quattro 8V 2.0 Turbo 190 2016-2020 TRW AUDI A3 Cabriolet quattro 8V 2.0 Turbo Diesel 150 2014-2020 TRW

Read more less

PRORAM oversized kit for the MQB platform fitting both RHD and LHD vehicles.  Features Our performance synthetic nanofiber air filter, a Twin-Tangential Velocity Stack, designed to optimise airflow. The hardpipe tapers from 102mm (4”) at the inlet to our 80mm oversized turbo elbow. A custom v-band clamp secures the parts and allows for easy fitment and a take-off barb connects the oem vacuum line. The heat shield helps maintain low intake temperatures by providing a physical barrier between the air filter and the rest of the engine bay The detailed fitting guide included in every box means everything is provided for a quick and easy and easy installation. Offers proven performance gains – especially with a tuned vehicle.  Easy to clean using our filter maintance kit - CK-003 What Does It Do? This induction kit will increase the airflow into the turbo while increasing engine noise over the restrictive factory air intake system. This kit includes everything required for the fitting of the induction kit. This kit replaces all of the factory intake pipework right back to the turbo inlet. What Will I Get? Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include: Black powder coated laser cut heat shield Proram pleated filter Oversized aliminium hardpipe Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2016-2021 Audi S3 (8V) 2.0 TFSI 2018-2021 Audi SQ2 (GA) 2.0 TFSI 2018-2021 Audi Q3 (F3) 2.0 TFSI 2013-2021 Seat Leon (MK3) 1.8 TSI 2018-2021 Seat Ateca Cupra (KH) 2.0 TSI 2014-2021 Seat Leon Cupra (MK3) 2.0 TSI 2019-2021 Skoda Karoq (NU7/ND7) 2.0 TSI 2015-2021 Skoda Superb (MK3) 2.0 TSI 2013-2021 Skoda Octavia (MK3) 1.8 TSI 2015-2021 Skoda Superb (MK3) 1.8 TSI 2013-2021 Skoda Octavia RS (MK3) 2.0 TSI 2017-2021 VW Arteon (3H) 2.0 TSI 2016-2021 VW Tiguan (AD/BW) 2.0 TSI 2013-2021 VW Golf (MK7) 2.0 TSI 2015-2021 VW Passat (3G) 2.0 TSI 2017-2021 VW Tiguan Allspace (AD/BW) 2.0 TSI 2015-2021 VW Touran (MK2) 1.8 TSI 2015-2021 VW Passat (3G) 1.8 TSI 2013-2021 VW Golf GTi (MK7) 2.0 TSI 2016-2021 VW Golf GTi Clubsport (MK7) 2.0 TSI 2019-2021 VW Golf GTi TCR (MK7) 2.0 TSI 2019-2021 VW T-Roc R (MK1) 2.0 TSI 2013-2021 VW Golf R (MK7) 2.0 TSI 2012-2021 Audi A3 (8V) 2.0 TFSI 2012-2021 Audi A3 (8V) 1.8 TFSI 2014-2021 Audi TT (FV) 2.0 TFSI 2015-2021 Audi TT (FV) 1.8 TFSI 2014-2021 Audi TTS (FV) 2.0 TFSI

Read more less

The ProMax enclosed filter has a modular design. Supplied with a bell mouth inlet and base adapter the housing can be combined with a foam Ramair or a pleated Proram filter. The aluminium enclosure shields against engine temps whilst the bell mouth is positioned for an increased cold air feed resulting in an added performance boost. This kit also includes custom silicone hoses from filter to turbo to increase performance and overall design aesthetics. The added hoses help create a more direct, undisturbed air flow for max performance gains. ProMax is great for applications in motorsport, fast road, and kit cars, where space is at a premium, but performance is critical. Features Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions Lightweight Adjustable Bespoke Mounting bracket Easy to clean using our filter maintance kit - CK-003   This product has the following dimensions: Filter External Neck Diameter: 80mm Overall Length: 240mm Base Width: 176mm Inlet Diameter: 102mm Filter Material: Foam Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2016-2021 Audi S3 (8V) 2.0 TFSI 2018-2021 Audi SQ2 (GA) 2.0 TFSI 2018-2021 Audi Q3 (F3) 2.0 TFSI 2013-2021 Seat Leon (MK3) 1.8 TSI 2018-2021 Seat Ateca Cupra (KH) 2.0 TSI 2014-221 Seat Leon Cupra (MK3) 2.0 TSI 2019-2021 Skoda Karoq (NU7/ND7) 2.0 TSI 2015-2021 Skoda Superb (MK3) 2.0 TSI 2013-2021 Skoda Octavia (MK3) 1.8 TSI 2015-2021 Skoda Superb (MK3) 1.8 TSI 2013-2021 Skoda Octavia RS (MK3) 2.0 TSI 2017-2021 VW Arteon (3H) 2.0 TSI 2016-2021 VW Tiguan (AD/BW) 2.0 TSI 2013-2021 VW Golf (MK7) 2.0 TSI 2015-2021 VW Passat (3G) 2.0 TSI 2017-2021 VW Tiguan Allspace (AD/BW) 2.0 TSI 2015-2021 VW Touran (MK2) 1.8 TSI 2015-2021 VW Passat (3G) 1.8 TSI 2013-2021 VW Golf GTi (MK7) 2.0 TSI 2016-2021 VW Golf GTi Clubsport (MK7) 2.0 TSI 2019-2021 VW Golf GTi TCR (MK7) 2.0 TSI 2019-2021 VW T-Roc R (MK1) 2.0 TSI 2013-2021 VW Golf R (MK7) 2.0 TSI 2012-2021 Audi A3 (8V) 2.0 TFSI 2012-2021 Audi A3 (8V) 1.8 TFSI 2014-2021 Audi TT (FV) 2.0 TFSI 2015-2021 Audi TT (FV) 1.8 TFSI 2014-2021 Audi TTS (FV) 2.0 TFSI

Read more less

This Performance intake kit is designed to fit the MK7 Volkswagen Golf, Audi, Seat Leon, and Skoda that have the EA211 - 1.4 TSI/TFSI engine. Features 70mm intake diameter Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions Easy to clean using our filter maintance kit - CK-003 What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits, see below for what this kit will include: Black powder coated heat shield Ramair Foam Filter Black powder coated aluminium intake pipe PVC intake ducting Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2014-2019 Audi Q3 (8UB/8UG) 1.4 TFSI 2014-2018 Audi A1 (8X) 1.2 TFSI 2014-2018 Audi A1 (8X) 1.4 TFSI 2014-2019 Audi Q2 (GA) 1.4 TFSI 2014-2019 Skoda Octavia (MK3) 1.2 TSI 2014-2019 Seat Toledo (KG) 1.4 TSI 2014-2019 Seat Toledo (KG) 1.2 TSI 2014-2019 Seat Alhambra (MK2) 1.4 TSI 2014-2019 Seat Ateca (KH) 1.4 TSI 2014-2019 Seat Leon (MK3) 1.2 TSI 2014-2019 Seat Leon (MK3) 1.4 TSI 2014-2019 Seat Ibiza (6J/6P) 1.4 TSI 2014-2019 Seat Ibiza (6J/6P) 1.2 TSI 2014-2019 Skoda Octavia (MK3) 1.4 TSI 2014-2019 Skoda Superb (MK3) 1.4 TSI 2014-2019 Skoda Rapid (NH) 1.4 TSI 2014-2019 Skoda Rapid (NH) 1.2 TSI 2014-2019 Skoda Yeti (5L) 1.2 TSI 2014-2019 Skoda Yeti (5L) 1.4 TSI 2014-2019 Skoda Fabia VRS (NJ) 1.4 TSI 2014-2019 Skoda Kodiaq (NS) 1.4 TSI 2014-2019 Skoda Fabia (NJ) 1.2 TSI 2014-2019 VW Golf (MK7) 1.2 TSI 2014-2019 VW Golf (MK7) 1.4 TSI 2014-2019 VW Tiguan (5N) 1.4 TSI 2014-2019 VW Touran (MK2) 1.2 TSI 2014-2019 VW Tiguan (AD/BW) 1.4 TSI 2014-2019 VW Tiguan Allspace (AD/BW) 1.4 TSI 2014-2019 VW Passat (3G) 1.4 TSI 2014-2019 VW Beetle (A5) 1.2 TSI 2014-2019 VW Caddy (MK4) 1.2 TSI 2014-2019 VW Beetle (A5) 1.4 TSI 2014-2019 VW Caddy (MK4) 1.4 TSI 2014-2019 VW Passat (CC) 1.4 TSI 2014-2019 VW Polo (6R/6C) 1.2 TSI 2014-2019 VW Polo (6R/6C) 1.4 TSI 2014-2019 VW Touran (MK2) 1.4 TSI 2014-2019 VW Polo Blue GT (6R/6C) 1.4 TSI 2014-2019 VW Scirocco (MK3) 1.4 TSI 2014-2019 VW Sharan (MK2) 1.4 TSI 2014-2019 VW Jetta (A6) 1.4 TSI 2014-2019 VW Jetta (A6) 1.2 TSI 2014-2019 Audi A3 (8V) 1.2 TSI 2014-2019 Audi A3 (8V) 1.4 TFSI

Read more less

This performance intake kit is designed to fit the Volkswagen, Audi, Seat and Skoda with 1.5 / 1.0 TSI engines Features Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions Mounts to standard factory mounting points and rubbers Easy to clean using our filter maintance kit - CK-003 What Will I Get? Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include: Black powder coated heat shield Ramair foam filter Black silicone intake pipe Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2017-2021 Skoda Octavia (MK3) 1.5 TSI 2018-2021 Audi Q2 (GA) 1.5 TSI 2018-2021 Audi A1 (GB) 1.5 TSI 2018-2021 Audi Q3 (F3) 1.5 TSI 2018-2021 Seat Arona (KJ) 1.5 TSI 2018-2021 Seat Ateca (KH) 1.5 TSI 2018-2021 Seat Leon (MK3) 1.5 TSI 2020-2025 Seat Leon (MK4) 1.5 TSI 2018-2021 Seat Tarraco (KN2) 1.5 TSI 2018-2021 Seat Ibiza (6F) 1.0 MPI 2018-2021 Seat Ibiza (6F) 1.5 TSI 2017-2021 Skoda Kamiq (NW) 1.5 TSI 2017-2021 Skoda Karoq (NU7/ND7) 1.5 TSI 2017-2021 Skoda Scala (NW) 1.5 TSI 2017-2021 Skoda Kodiaq (NS) 1.5 TSI 2017-2021 Skoda Superb (MK3) 1.5 TSI 2017-2021 VW Arteon (3H) 1.5 TSI 2020-2025 VW Golf (MK8) 1.5 eTSI 2020-2025 VW Golf (MK8) 1.5 TSI 2020-2021 VW T-Cross (MK1) 1.5 TSI 2017-2021 VW T-Roc (MK1) 1.5 TSI 2017-2021 VW Golf (MK7) 1.5 TSI 2017-2021 VW Touran (MK2) 1.5 TSI 2017-2021 VW Tiguan (AD/BW) 1.5 TSI 2017-2021 VW Tiguan Allspace (AD/BW) 1.5 TSI 2017-2021 VW Polo (AW) 1.0 MPI 2017-2021 VW Polo (AW) 1.5 TSI 2017-2021 VW Passat (3G) 1.5 TSI 2017-2021 Audi A3 (8V) 1.5 TFSI 2017-2021 Audi A3 (8V) 1.5 TSI 2020-2021 Audi A3 (8Y) 1.5 TSI 2020-2023 VW Caddy (MK4) 1.5 TFSI 2020-2023 VW Caddy (MK5) 1.5 TFSI  

Read more less

  Front Splitter V.1 Audi S3 / A3 S-Line Hatchback / Sportback 8V Facelift FITS:Audi S3 Hatchback 8V Facelift 2017-2020Audi A3 S-Line Hatchback 8V Facelift 2017-2020Audi S3 Sportback 8V Facelift 2017-2020Audi A3 S-Line Sportback 8V Facelift 2017-2020 COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

Read more less

PFF3-1302 Made in our Black 95A material with a tapered bore to reduce stress during articulation, this bush fits vehicles with the combination of an aluminium subframe (OE Part No. 5Q0199369, 5WA199369A and 3Q0199369E) and pressed-steel wishbones only. For vehicles with a steel subframe, please use PFF85-802. For vehicles requiring further on-car caster adjustment, please use PFF3-902G. OEM Part Number: Bush = 5C0407183 / 5Q0407183 / 81A407183 OEM Part Number: Arm = 5C0407151 / 5Q0407153 / 5Q0407151R / 5Q0407152R OEM Part Number: Arm = 1K0407151BE / 1K0407152BE / 81A407151C / 81A407152C   Sold as set of 2 needed for car    Fitment:Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi RS3 MK3 8V (2015 - 2020), Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi RS3 MK4 8Y (2020 on), Seat Formentor 2WD (2020 on), Seat Formentor 4WD (2020 on), Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link (2012-2019), Volkswagen Golf MK7 5G 4WD inc R (2012-2019), Volkswagen Golf MK7 GTE, Volkswagen Golf MK8 2WD Multi-Link (2020 -), Volkswagen Golf R MK8 4WD (2020 -), Volkswagen Passat B8 (2013 - 2024), Volkswagen T-Roc 4-Motion inc R (2018 on), Volkswagen T-Roc FWD Rear Beam (2018 on), Volkswagen Tiguan AD/BW MK2 (2017 on), Volkswagen Touran (2017 on), Volkswagen Arteon (2017 on)  

Read more less

Rear Valance Audi A3 S-Line Sportback 8V (Version with dual exhausts tips on one side) FITS ONLY:Audi A3 S-Line Sportback 8V 2013 - 2016 COMPLETE SET CONTAINS: -> Rear DiffuserCOLOUR:-> Gloss Black This product requires the removal of the original diffuser, self-tapping screws are needed to secure fitment of the new diffuser. CHARACTERISTICS: Adds aesthetic value. Lightweight and offers some flexibility. This product is made from ABS plastic. The same material is used widely in the automotive industry. MORE INFORMATION: No additional work is required to finish the product. The product will arrive with a protective film.  Removal of the protective film will void any returns, only remove once you are certain the product will fit. We cannot be held responsible for the incorrect installation or use of this product. Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.  We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual. This product has been TUV MATERIALGUTACHTEN certified. The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

Read more less

Rear Valance Audi A3 S-Line Sportback 8V (Version with single exhaust tips on one side) FITS ONLY:Audi A3 S-Line Sportback 8V 2013 - 2016 COMPLETE SET CONTAINS: -> Rear DiffuserCOLOUR:-> Gloss Black This product requires the removal of the original diffuser, self-tapping screws are needed to secure fitment of the new diffuser. Our full fitting manual can be found here:  CHARACTERISTICS: Adds aesthetic value. Lightweight and offers some flexibility. This product is made from ABS plastic. The same material is used widely in the automotive industry. MORE INFORMATION: No additional work is required to finish the product. The product will arrive with a protective film.  Removal of the protective film will void any returns, only remove once you are certain the product will fit. We cannot be held responsible for the incorrect installation or use of this product. Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.  We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual. This product has been TUV MATERIALGUTACHTEN certified. The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

Read more less

VWR 'Cup Edition' EVO 8.5 x 18" Alloy Wheels RacingLine's 'Cup Edition' EVO 8.5 x 18" alloy wheel has been developed for our track and race cars to give a track-orientated rim that's both ultra-strong yet light. Why choose 'Cup Edition' EVO? The VWR ‘Cup Edition’ EVO 18" Alloy Wheel has been a favourite for a decade for race and track cars to deliver an ultra-strong yet lightweight rim capable of repeatedly coping with the extreme demands that track driving brings. Developed direct from our racing programme, this exact family of VWR 'Cup Edition' EVO Alloy Wheels is based on the rims used in the Volkswagen Racing Cup and the British Touring Car Championship.  Now, our Cup Edition EVO wheel updates this classic design with lighter weight, a fresh new appearance and stunning detailing. The perfect track dimensions for MQB/MQBE of 8.5 x 18" diameter with an ET45 offset. Finished in a choice of stunning hard-wearing Satin Gunmetal Grey, Gloss Black, Matte Bronze or Motorsport White, all complete with RacingLine centre cap. Produced to the highest standards, developed and manufactured to exceed OEM standards. PERFECT FITMENT Fitment offset of ET45 for many VWG models on MQB, MQB EVO and A5 platforms with 5x112 PCD. LIGHT : STRONG Weighing 9.7kg / 21.3lbs per wheel, whilst crucially still retaining the strength needed for the demands of road or track. IDEAL FOR TRACK The choice of 18" rim is ideal for track use, allowing a higher, squarer tyre fitment without the risk of excessive rubbing. Precision engineered for Perfect Performance. Max. wheel load of 560kg tested to ISO 7141 for geometric accuracy, impact strength, structural fatigue and load rating requirements Knurled bead seats to prevent tyre slip/rotation Weight removed from the mounting face including drainage cutouts to ensure no trapped water or debris between wheel and hub face causing long term corrosion Choice of four durable finishes to look good, and stay looking good Confirmed applications. Fitment for all VWG models on MQB, MQB EVO and A5 platforms with 5x112 PCD: VWR610008 18 x 8.5 ET45 Gunmetal Grey   VWR610009 18 x 8.5 ET45 Motorsport White​ ​VWR610010 18 x 8.5 ET45 Gloss Black   VWR610011 18 x 8.5 ET45 Matte Bronze For motorsport use (eg. for vehicles with additional camber for arch clearance) we also offer an ET35 offset in Gunmetal Grey. VWR610100 18 x 8.5 ET35 Gunmetal Grey > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Golf 5 2005-2008 > VW Golf 6 2008-2014 > VW Scirocco 2008-2017 > VW Jetta / GLI 5 2005-2011 > VW Jetta / GLI 6 2011-2018 > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi SQ2 2018+ > Audi S3 8P 2006-2012 > Audi A3 8P 2003-2012 > Audi TT II 8J 2006-2014 > Cupra Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > SEAT Leon II 1P 2005-2012 > Cupra Formentor 2020+ > Cupra Ateca 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Octavia II 1Z 2004-2013   Strength matters. With a load rating of 560kg per wheel, these Cup Edition EVO wheels have the strength to cope with repeated, harsher track use.  It's essential for the rim to have this sort of strength engineered-in from the start. Just imagine the 'spike loads' running through a wheel hitting circuit kerbing (such as sausage kerbs) through a corner at speed. Obsessive weight saving. We've put a lot of development time into weight reduction, but without compromising strength. Incorporating cut-outs in the mounting face, material removal in the front and back of each spoke, even a groove running around the outer rim to save a few more grams. ​Knurled tyre bead seat. Another nice new feature incorporated into the design are knurled strips on the outer barrel of the wheel where the tyre bead seats.    A true motorsport feature that prevents unwanted tyre slip or rotation on the rim in extreme use. The result? 9.7kg / 21.3lbs per wheel, yet still retaining a load rating of 560kg.

Read more less

This performance intake kit is designed to fit the VW 1.0 TSI platform. For full compatibility please check list below. Features Easy to maintain with our filter maintenance kit – CK-003 Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits, see below for what this kit will include: Black powder coated heat shield Proram pleated filter Black powder coated aluminium intake pipe Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2015-2018 Audi A1 (8X) 1.0 TFSI 2016-2020 Audi A3 (8V) 1.0 TFSI 2017-2025 Seat Arona (KJ) 1.0 TSI 2016-2025 Seat Ateca (KH) 1.0 TSI 2015-2020 VW Caddy (MK4) 1.0 TSI 2014-2022 Skoda Fabia (MK3) 1.0 TSI 2015-2020 VW Golf (MK7) 1.0 TSI 2019-2025 Skoda Kamiq (NW) 1.0 TSI 2017-2025 Skoda Karoq (NU7/ND7) 1.0 TSI 2015-2020 Seat Leon (MK3) 1.0 TSI 2016-2020 Skoda Octavia (MK3) 1.0 TSI 2017-2025 VW Polo (AW) 1.0 TSI 2017-2019 Skoda Rapid (NH) 1.0 TSI 2016-2020 Audi Q2 (GA) 1.0 TFSI 2019-2025 Skoda Scala (NW) 1.0 TSI 2018-2025 VW T-Cross (MK1) 1.0 TSI 2019-2025 VW T-Roc (MK1) 1.0 TSI 2017-2019 Seat Toledo (MK4) 1.0 TSI 2015-2017 Seat Ibiza (MK4) 1.0 TSI 2018-2025 Seat Ibiza (MK5) 1.0 TSI

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

Spoiler CAP 3D Audi A3 / A3 S-Line / S3 / RS3 Sedan 8V FITS ONLY:Audi A3 Sedan 8V (2013-2016)Audi A3 S-Line Sedan 8V (2013-2016)Audi RS3 Sedan 8V (2013-2016)Audi S3 Sedan 8V (2013-2016)Audi A3 Sedan 8V (2016-2020)Audi A3 S-Line Sedan 8V (2016-2020)Audi RS3 Sedan 8V (2016-2020)Audi S3 Sedan 8V (2016-2020) COMPLETE SET CONTAINS:-> Spoiler CAP 3D + 3M Tape-> Degreasing Cloth-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.  

Read more less

Spoiler CAP Audi A3 / A3 S-Line / S3 / RS3 Sedan 8V FITS ONLY:Audi A3 Sedan 8V (2013-2016)Audi A3 S-Line Sedan 8V (2013-2016)Audi RS3 Sedan 8V (2013-2016)Audi S3 Sedan 8V (2013-2016)Audi A3 Sedan 8V (2016-2020)Audi A3 S-Line Sedan 8V (2016-2020)Audi RS3 Sedan 8V (2016-2020)Audi S3 Sedan 8V (2016-2020) COMPLETE SET CONTAINS:-> Spoiler Extension + 3M Tape-> Degreasing Cloth-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified. #    

Read more less