Performance - Audi A7 (C7) 4G 2010-2018

Higher Output Ignition Coils.for all Volkswagen I Audi I Skoda I Seat with:2.0 TFSI EA113  /  2.0 TSI EA888 gen.12.5 TFSI (pre-2017)  /  3.0 TFSI V6 SC4.2 V8 FSI  /  5.2 V8 FSI For the older-gen TFSI, TSI and FSI engines, RacingLine's Higher Output Ignition Coils deliver greater energy output, ensuring a stronger and more consistent spark. A simple plug-and-play upgrade over the OE factory coils.VWR900003 (individual coil pack) What do they do?The RacingLine Higher Output Ignition Coils are a direct plug-and-play upgrade from your OE ignition coils. Whether your engine is standard or Stage 3 tuned, it will immediately benefit from the greater energy output and stronger, more consistent spark generated by a set of RacingLine Coil Packs. The RacingLine Higher Output Ignition Coils deliver a 10% increase in output energy versus OE. This greater output is perfect for drivers looking to maximise output from either their stock or modified car.  Why have we settled on a 10% gain in output energy for our Coil Packs? Because this is the optimum increase level for VWG's TFSI/TSI/FSI engines. Beyond this, no additional benefit is gained, yet the coil's internal temperatures begin to rise sharply. So, at this level, our Coil Packs can maintain coil voltage under load with little or no drop-off, performing consistently from idle through to the shift point or red-line. Replacement is all the more worthwhile on older engines still running the OE Coil Packs. A new set makes a great preventative maintenance upgrade to avoid the risk of misfires caused as the OE Coil Packs age and gradually break down. Fitment couldn't be easier. These are a simple plug and play replacement. Remove the OE Coil Packs, replace with our Higher Output versions. Confirmed applications VWR900003 – RED   All vehicles fitted with the following engines: 1.8 TSI EA888 Gen 1 2.0 TFSI EA113 2.0 TSI EA888 Gen 1 2.5 TFSI pre-2017 3.0 V6 TFSI Supercharged 4.2 V8 FSI 5.2 V8 FSI   Sold individually.  Most popular models with these engines include: > VW Golf 5 2005-2008 > VW Golf 5 GTI 2005-2008 > VW Golf 6 2008-2014 > VW Golf 6 GTI 2009-2014 > VW Golf 6 R 2009-2014 > VW Scirocco 2008-2017 > VW Jetta / GLI 5 2005-2011 > VW Polo 5 6C/6R 2008-2018 > VW Touran 2018+ > Audi S3 8P 2006-2012 > Audi RS3 8P 2011-2012 > Audi A3 8P 2003-2012 > Audi TT II 8J 2006-2014 > Audi TTRS II 8J 2009-2014 > Audi A4 / S4 / RS4 B8 2007–2015 > Audi A6 / S6 / RS6 C7 4G 2011-2018 > Audi A7 / S7 / RS7 C7 4G 2011-2018 > Audi A8 / S8 D4 2010-2017 > Audi Q7 4L 2009-2015 > Audi R8 (first gen 4S) 2006-2013 > Audi R8 (gen2 4S) 2015+ > SEAT Ibiza 6F 2017+ > SEAT Leon II 1P 2005-2012 > Skoda Octavia II 1Z 2004-2013   What do Coil Packs do?A Coil Pack's function is to transform the car battery’s 12-volt output to a much higher voltage. This intensified electrical energy provides a more reliable source for your spark plug to function from, improving engine performance by igniting the fuel and air mixture more efficiently. We've spend a lot of our development time optimising the Coil Pack's energy levels to ensure operating temperatures are controlled. Over the lifecycle of our Coil Pack, this thermal management will help to prevent future break down.  Coil Packs that generate higher than 10% over OE will overheat and deteriorate over time. We've increased energy output gain to a level that will keep coils as cool as possible for as long as possible. This level of increase represents the 'sweet spot' of the diminishing returns of how much additional energy can benefit the spark strength versus the rapid increase in  internal temperatures for long term reliability and performance. Replaces OE part numbers:06D90511506D905115A06D905115C06D905115D06D905115F06D905115G06D905115K06E905115A06E905115B06E905115C06E905115D06E905115E06E905115F06E905115G06F905115C06F905115E06F905115F06H905115B07K905715D07K905715E07K905715F07K905715G

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:70mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:76mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:83mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:90mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This filter is designed to be fitted to the outside of a rigid pipe such as a MAF sensor housing. These filters have an rubber polymer neck and a cone shaped filter element. This enables easy fitting to space-restricted engine compartments, whilst providing a large surface to maximise potential air flow. The filters are constructed using stainless steel cage internal and our famous 15mm thick twin layer foam.  Ramair universal filters are designed and manufactured for a very diverse range of applications and are made here in the UK. They are available in many different sizes and styles available.  Clean using our filter maintenance kit - CK-003 This product has the following dimensions: Filter Internal Neck Diameter: You choose Filter Neck Length: 23mm Filter Overall Height: 130mm Filter Base Width: 150mm Filter Top Width: 93mm Filter Material: 15mm Dual Layer Foam

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This filter is designed to be inserted into a flexible hose such as a rubber or silicone intake pipe. These filters have an aluminium ram-pipe neck and a cone shaped filter element. This integral cone channels all the incoming air, towards the inlet manifold, and in doing so, reduces unnecessary turbulence. These filters are also cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of pleated surface area an added boost of power to your engine too! These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of motorsport filtration the pleated range by Ramair is the premium choice on the market today for your fast road or track car. With its large size, technologically advanced filter and bell mouth alloy spun base this filter kit is capable of handling extremely large power & flow rates. Filter Outer Neck Diameter: Select Your Option Filter Neck Length: 45mm (1.8inch) Filter Overall Length: 185mm (7.3inch) Filter Base Width: 150mm (5.9inch) Filter Top Width: 120mm (4.7inch) Filter Material: Pleated Nanofibre Filter Base Material: Aluminium Filter Base Finish: Black Powder Coat

Read more less

This is a replacement filter for Audi A6/A7/A8 2.0 TFSI/TDI. For a full list of fitments see compatibility chart. Features High Performance, MAF Safe, twin layer, fully reticulated foam Fits in the OEM Airbox and replaces inefficient paper filter Easy to clean using our filter maintenance kit - CK-003 Stainless steel cage support structure Guaranteed surface area using high quality custom blended polymer What Does It Do? The Ramair Panel Filter range is made from twin core Ramair Aeriform foam and our stainless steel cage which is used in many of our tier 1 Motorsport applications for maximum strength. A rubber polymer surround gives a fantastic clean and smooth finish with longevity in mind. These filters are direct replacements for the OEM air filter in your car, making this filter easy to fit and maintain. Ramair twin core foam is unique and like no other in the market. Our foam is designed to give maximum dust filtration along with optimum performance. Filter Length: 123mm (4.8inch) Filter Width: 157mm (6.2inch) Filter Shape: Unique Filter Material: Dual Layer Foam Fitment Compatibility Chart This product fits the following: MAKE MODEL ENGINE YEAR Audi A6 (C7) 1.8 TFSI 2014-2018 Audi A6 (C7) 2.0 TFSI 2011-2018 Audi A6 (C7) 2.0 TDI 2011-2018 Audi A6 (C7) 2.0 TDI Quattro 2015-2018 Audi A6 (C7) 2.0 TFSI Hybrid 2011-2015 Audi A6 (C7) 2.0 TFSI Quattro 2012-2018 Audi A7 (4G) 1.8 TFSI 2015-2018 Audi A7 (4G) 2.0 TFSI 2014-2018 Audi A7 (4G) 2.0 TFSI Quattro 2015-2018 Audi A8 (D4) 2.0 FSI Quattro 2017-2018 Audi A8 (D4) 2.0 TFSI Quattro 2016-2018

Read more less

APR Ignition Coils are designed to be a direct plug-and-play upgrade to factory coils, and provide greater energy output, ensuring a stronger and more consistent spark. The commonplace replacement of factory ignition coils with those taken from the higher output Audi R8 is popularly believed to provide greater energy output. However, testing proves that they are no more powerful than the factory coils that are found on other engines. APR Ignition Coils increase energy output by up to 10% over stock. They are a direct upgrade or replacement, and come with a unique red housing! Features: Up to 10% more energy output than stock Red housing with APR Logo True upgrade, not just aesthetic Direct plug-and-play Suitable for the following engines: - 1.8T EA888 Gen 1 (Requires 4x)- 2.0T EA113 (Requires 4x)- 2.0T EA888 Gen 1 (Requires 4x)- 2.5 TFSI  Pre 2017 (Requires 5x)- 3.0 V6 Supercharged (Requires 6x)- 4.2 V8 FSI RS4 / RS5 etc. (Requires 8x)These are sold indivually, so you will need to add the number required. If you are unsure which engine you have, please contact our team before purchasing. fits: Shop By Car/Audi/RS4 (B8) Shop By Car/Audi/Q3 (Mk1 11-18) Shop By Car/Audi/A6 (C7) Shop By Car/Audi/A6 (C6) Shop By Car/Skoda/Yeti Shop By Car/SEAT/CUPRA/Toledo Mk3 (5P) Shop By Car/SEAT/CUPRA/Leon Mk2 (1P) Shop By Car/Audi/TT Mk2 (8J) Shop By Car/Audi/RS5 (B8) Shop By Car/Audi/RS4 (B7) Shop By Car/Audi/RS3 (8P) Shop By Car/Audi/A7 (4G8 10-17) Shop By Car/Audi/A5 (B8) Shop By Car/Audi/A4 (B8) Shop By Car/Audi/A4 (B7) Shop By Car/Volkswagen/Tiguan (Mk1) Shop By Car/Volkswagen/Passat CC Shop By Car/Volkswagen/Passat B6 Shop By Car/Volkswagen/EOS Shop By Car/Volkswagen/Scirocco Shop By Car/Volkswagen/Golf Mk5 Shop By Car/Volkswagen/Golf Mk6 Shop By Car/Audi/RS3 (8V) Shop By Car/Skoda/Superb (3T 08-15) Shop By Car/Audi/A3 (8P 03-13) Shop By Car/Audi/S3 (8P) Shop By Car/Audi/S4 (B8) Shop By Car/Audi/S5 (B8) Shop By Car/Audi/TT RS (8J) Shop By Car/Skoda/Octavia Mk2 (1Z)

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

Check out our 4D Number Plate Tags, Designed to be fitted with 4D number plates (but can be fitted to any UK Number plate) Available in any colour you want, with an array of logo's; again, in any colour you want! These simply stick to the left side of your number plate using the pre applied weatherproof backing tape! The tags are only 50mm wide meaning they are 100% legal in terms of sizing under UK number plate law. This listing is for one pair (2 tags) Customise: You choose the colour of your tag! You choose the logo / emblem You choose the orientation of the logo You choose the colour of the logo! Options: We've created 2 sizes, Option 1 is for vehicles who do not use a number plate holder or frame of any kind and just have the plate on the car, this is designed to stick on the left side of the plate and cover it fully. Option 2 is for vehicles which have a number plate frame / holder - is designed a bit smaller so that it fits inside and still gives you the desired look (See disclaimer below) Measurements: Option 1: H 110mm // W 50mm // T 3mm Option 2: H 100mm // W 47mm // T 3mm Want something Custom? Drop us an email to support@ceuk.org and our design team would love to help! Dislciamer: The full size option may not follow the corners of your number plate and may be larger - this is designed to be universal and fit all number plates, it will always cover the corner completely The smaller option may have a 1-2mm border between the tag and your frame, as all frames are different sizes this has been designed to be universal - see photo  

Read more less

Check out our 4D Number Plate Tags, Designed to be fitted with 4D number plates (but can be fitted to any UK Number plate) Available in any colour you want, with an array of logo's; again, in any colour you want! These simply stick to the left side of your number plate using the pre applied weatherproof backing tape! The tags are only 50mm wide meaning they are 100% legal in terms of sizing under UK number plate law. This listing is for one pair (2 tags) Customise: You choose the colour of your tag! You choose the logo / emblem You choose the orientation of the logo You choose the colour of the logo! Options: We've created 2 sizes, Option 1 is for vehicles who do not use a number plate holder or frame of any kind and just have the plate on the car, this is designed to stick on the left side of the plate and cover it fully. Option 2 is for vehicles which have a number plate frame / holder - is designed a bit smaller so that it fits inside and still gives you the desired look (See disclaimer below) Measurements: Option 1: H 110mm // W 50mm // T 3mm Option 2: H 100mm // W 47mm // T 3mm Want something Custom? Drop us an email to support@ceuk.org and our design team would love to help! Dislciamer: The full size option may not follow the corners of your number plate and may be larger - this is designed to be universal and fit all number plates, it will always cover the corner completely The smaller option may have a 1-2mm border between the tag and your frame, as all frames are different sizes this has been designed to be universal - see photo  

Read more less

Introducing the Enhanced Edition LED H7 Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in ANY H7 Fitments and replaces the OEM lamp unit for an ultra bright replacement. This bulb can be used as a dipped & high beam upgrade as well as a foglight. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! No longer any need for clips & caps! The bulb is designed to fit in any H7 fixing without any adjustments or additional items, and utilising its 4 point technology, this can be orientated in either 2 or 4 location points to ensure the best output and zero polarity issues! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H7 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H7 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped & high beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H8 or H11 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H8/11 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

For hydraulic brake and clutch systems. Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3) Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual. Min. dry boiling point 260°C. Min. wet boiling point 165°C Notice Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs. Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water.  DOT 4 Technical Info Contents 500 ml Colour Pale Amber Chemical basis Butoxyethanol Shelf life from production 36 Month Min. wet boiling point 165 °C Min. dry boiling point 260 °C Density 1.052 g/ml Density conditions at 20°C pH value 7-11

Read more less

Modern direct injection engines are efficient and powerful, but are prone to carbon deposits that build up inside the intake port and on the back-side of intake valves. These deposits rob the engine of power and efficiency. Traditional methods of manually removing these deposits can be difficult, time consuming, and expensive. The 034Motorsport Direct Injection Head Port Cleaning Tool makes short and easy work of removing these deposits from your intake ports and valves. The tool has a small port for a media blasting wand and a large port that connects to a shop vacuum hose. The vacuum generated by the shop vac holds the tool in place up against the intake port, freeing your hands to focus on the media blasting. To use, simply rotate the crankshaft to close the intake valves in a given intake port before positioning the Direct Injection Head Port Cleaning Tool on the intake port. Turn on the vacuum and media blast away. All of the blasting media is sucked into the shop vac, making the entire process quick and easy, with little to no clean-up necessary afterwards. Features:Machined from Billet 6061-T6 Aluminum For DurabilityClear Anodized for an Attractive, Corrosion Resistant FinishFits Standard 40mm (1 1/2") ShopVac HoseAccommodates Media Blast Wands Up to 10mm (3/8") in DiameterMakes Carbon Cleaning of Direct Injection VAG Engines Much Easier and Faster What's Included:Direct Injection Head Port Cleaning Tool (x1)Lots of Additional Free Time Fitment Guide:See Fitment Guide Tab for Extensive List of Applications Frequently Asked Questions:Does this fit the cylinder head without injector removal? - YESDoes this fit the B7 RS4 heads without injector removal? - YESNote: For 2.0 motors, it is easier to use this tool with the injectors removed, and the 2.0 injectors are easy to remove.   Suitable for: Shop By Car/Audi/RS7 (C7) Shop By Car/Audi/Q3 (Mk1 11-18) Shop By Car/Audi/A6 (C7) Car Care/Tools Shop By Car/Audi/A6 (C6) Shop By Car/SEAT/CUPRA/Exeo Shop By Car/Skoda/Roomster Shop By Car/SEAT/CUPRA/Ibiza Mk5 (6J) Shop By Car/Audi/TT Mk2 (8J) Shop By Car/Audi/S4 (B7) Shop By Car/Audi/S4 (B6) Shop By Car/Audi/RS5 (B8) Shop By Car/Audi/RS4 (B7) Shop By Car/Audi/RS3 (8P) Shop By Car/Audi/R8 Mk1 (42 06-15) Shop By Car/Audi/A8 Shop By Car/Audi/A7 (4G8 10-17) Shop By Car/Audi/A5 (B8) Shop By Car/Audi/A4 (B8) Shop By Car/Audi/A4 (B7) Shop By Car/Volkswagen/Tiguan (Mk1) Shop By Car/Volkswagen/Passat B6 Shop By Car/Volkswagen/EOS Shop By Car/Audi/A4 (B9) Shop By Car/Audi/A5 (B9) Shop By Car/Skoda/Fabia Mk3 (NJ) Shop By Car/Volkswagen/Tiguan (Mk2) Shop By Car/Volkswagen/Golf Mk5/Maintenance / Tools Shop By Car/Audi/S3 (8V)/Maintenance / Tools Shop By Car/SEAT/CUPRA/Ateca Shop By Car/Audi/Q2 Shop By Car/Audi/S6 (C7) Shop By Car/Volkswagen/Golf Mk7/Maintenance / Tools Shop By Car/Skoda/Karoq Shop By Car/Skoda/Kamiq Shop By Car/Volkswagen/Golf Mk6/Maintenance / Tools Shop By Car/Skoda/Octavia Mk3 (5E)/Maintenance / Tools Shop By Car/Skoda/Fabia Mk2 (5J)/Maintenance / Tools Shop By Car/Audi/S6 (C6) Shop By Car/Audi/A3 (8P 03-13)/Maintenance / Tools Shop By Car/Audi/A3 (8V 12-20)/Maintenance / Tools Shop By Car/Audi/S3 (8P)/Maintenance / Tools Shop By Car/Audi/TT Mk3 (8S)/Maintenance / Tools Shop By Car/Audi/S5 (B8)/Maintenance / Tools Shop By Car/Audi/TT RS (8J)/Maintenance / Tools Shop By Car/Skoda/Fabia Mk1 (6Y)/Maintenance / Tools Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Maintenance / Tools Shop By Car/Volkswagen/Beetle (16)/Maintenance / Tools Shop By Car/SEAT/CUPRA/Formentor Shop By Car/Audi/RS6 (C7)/Maintenance / Tools     Code: 034-034-108-Z054

Read more less

The 034Motorsport Billet Coolant Vent Union is designed to replace the factory plastic and failure-prone coolant union on the cylinder head of the EA888 Gen3 and Gen4 engines. Being in close proximity to the turbocharger, the factory plastic coolant union is subject to a lot of heat, becoming brittle and failing over time. Upgrading to the Billet Coolant Vent Union minimizes the risk of coolant leaks, enhancing the reliability of your EA888!The 034Motorsport Billet Coolant Vent Union is machined from billet 6061-T6 aluminum, which is ideal for components exposed to high temperatures and harsh operating conditions. The Billet Coolant Vent Union is then black anodized for long-lasting looks and corrosion resistance to ensure that this upgrade is able to withstand the high temperatures next to your turbocharger. FEATURES: CNC Machined From Billet 6061-T6 Aluminum Black Anodized for Long Lasting Good Looks and Corrosion Resistance New O-Ring Preinstalled Direct Replacement of OEM Component WHAT’S INCLUDED: 034Motorsport Billet Coolant Vent Union 1x O-Ring Preinstalled VEHICLE FITMENT FOR: Shop By Car/Audi/Q3 (Mk1 11-18) Shop By Car/Audi/A6 (C7) Shop By Car/Audi/A7 (4G8 10-17) Shop By Car/Audi/A5 (B8) Shop By Car/Audi/A4 (B9) Shop By Car/Audi/A5 (B9) Shop By Car/Volkswagen/Passat B8 Shop By Car/Audi/Q5 (B9) Shop By Car/Volkswagen/Tiguan (Mk2) Shop By Car/Volkswagen/Arteon Shop By Car/Audi/S3 (8V) Shop By Car/Volkswagen/Golf Mk7 Shop By Car/Skoda/Octavia Mk3 (5E) Shop By Car/Audi/A3 (8Y 2020-) Shop By Car/Audi/A3 (8V 12-20) Shop By Car/Audi/TT Mk3 (8S) Shop By Car/SEAT/CUPRA/Leon Mk3 (5F) Shop By Car/Volkswagen/Beetle (16) Shop By Car/Audi/S3 (8Y)

Read more less

REAR ANTI ROLL BAR LINK BUSH PFR3-718   OEM Part Number: 8K0505465G --- REAR ANTI ROLL BAR LINK BUSH PFR3-718BLK   OEM Part Number: 8K0505465G --- FITS: Audi A4 (2008-2016), Audi A4 Quattro Inc. Allroad (2008 - 2016),  Audi RS4 (2012-2016), Audi S4 (2009-2016), Audi A5 (2007-2016), Audi A5 Quattro (2007-2016), Audi RS5 (2010 - 2016), Audi S5 (2007 - 2016),  Audi A6 (2011 - 2018), Audi A6 Quattro (2011 - 2018), Audi RS6 (2012 - 2018), Audi S6 (2012 - 2018), Audi A7 (2010 - 2017), Audi A7 Quattro (2010 - 2017), Audi RS7 (2013 - 2017), Audi S7 (2012 - 2017) ,  Audi A8 (2010 - 2017), Audi A8 Quattro (2010 - 2017), Audi S8 Quattro (2010 - 2017), Porsche Macan 95B (2014 on), Audi Q5 (2008-2017), Audi Q5 Quattro (2008-2017), Audi SQ5 (2013 - 2017) Quantity per car 2 (Price is for amount in pack)    INSTRUCTIONS/DRAWING       

Read more less

REAR UPPER WISHBONE OUTER BUSH PFR3-716   OEM Part Number: Bush = 8K0501541 OEM Part Number: Arm = 8K0505323H OEM Part Number: Arm = 8K0505324H --- REAR UPPER WISHBONE OUTER BUSH PFR3-716BLK   OEM Part Number: Bush = 8K0501541 OEM Part Number: Arm = 8K0505324H OEM Part Number: Arm = 8K0505323H --- REAR UPPER WISHBONE INNER BUSH PFR3-716   OEM Part Number: Bush = 8K0501541 OEM Part Number: Arm = 8K0505323H OEM Part Number: Arm = 8K0505324H --- REAR UPPER WISHBONE INNER BUSH PFR3-716BLK   OEM Part Number: Bush = 8K0501541 OEM Part Number: Arm = 8K0505324H OEM Part Number: Arm = 8K0505323H --- FITS: Audi A4 (2008-2016), Audi A4 Quattro Inc. Allroad (2008 - 2016),  Audi RS4 (2012-2016), Audi S4 (2009-2016), Audi A5 (2007-2016), Audi A5 Quattro (2007-2016), Audi RS5 (2010 - 2016), Audi S5 (2007 - 2016),  Audi A6 (2011 - 2018), Audi A6 Quattro (2011 - 2018), Audi RS6 (2012 - 2018), Audi S6 (2012 - 2018), Audi A7 (2010 - 2017), Audi A7 Quattro (2010 - 2017), Audi RS7 (2013 - 2017), Audi S7 (2012 - 2017) ,  Audi A8 (2010 - 2017), Audi A8 Quattro (2010 - 2017), Audi S8 Quattro (2010 - 2017), Porsche Macan 95B (2014 on), Audi Q5 (2008-2017), Audi Q5 Quattro (2008-2017), Audi SQ5 (2013 - 2017) Quantity per car 2 (Price is for amount in pack)    INSTRUCTIONS/DRAWING       

Read more less

REAR LOWER TRACK ROD OUTER BUSH PFR3-715 PFR3-715 is a reinforced replacement bush to revitalise bush performance and provide stability to the rear suspension. OEM Part Number: 8K0501529N OEM Part Number: 8K0501530N OEM Part Number: 8K0501529L --- REAR LOWER TRACK ROD INNER BUSH PFR3-715 PFR3-715 is a reinforced replacement bush to revitalise bush performance and provide stability to the rear suspension. OEM Part Number: 8K0501529N OEM Part Number: 8K0501530N OEM Part Number: 8K0501529L --- REAR LOWER TRACK ROD OUTER BUSH PFR3-715BLK PFR3-715BLK is a reinforced replacement bush to revitalise bush performance and provide stability to the rear suspension. OEM Part Number: 8K0 501 529 N OEM Part Number: 8K0 501 530 N OEM Part Number: 8K0 501 529 L --- REAR LOWER TRACK ROD INNER BUSH PFR3-715BLK PFR3-715BLK is a reinforced replacement bush to revitalise bush performance and provide stability to the rear suspension. OEM Part Number: 8K0501529N OEM Part Number: 8K0501530N OEM Part Number: 8K0501529L --- FITS: Audi A4 (2008-2016), Audi A4 Quattro Inc. Allroad (2008 - 2016),  Audi RS4 (2012-2016), Audi S4 (2009-2016), Audi A5 (2007-2016), Audi A5 Quattro (2007-2016), Audi RS5 (2010 - 2016), Audi S5 (2007 - 2016),  Audi A6 (2011 - 2018), Audi A6 Quattro (2011 - 2018), Audi RS6 (2012 - 2018), Audi S6 (2012 - 2018), Audi A7 (2010 - 2017), Audi A7 Quattro (2010 - 2017), Audi RS7 (2013 - 2017), Audi S7 (2012 - 2017) ,  Audi A8 (2010 - 2017), Audi A8 Quattro (2010 - 2017), Audi S8 Quattro (2010 - 2017), Porsche Macan 95B (2014 on), Audi Q5 (2008-2017), Audi Q5 Quattro (2008-2017), Audi SQ5 (2013 - 2017) Quantity per car 2 (Price is for amount in pack)    INSTRUCTIONS/DRAWING       

Read more less

REAR WHEEL BEARING HOUSING BUSH PFR3-714   OEM Part Number: 8K0505279E --- REAR WHEEL BEARING HOUSING BUSH PFR3-714BLK   OEM Part Number: 8K0505279E --- FITS: Audi A4 (2008-2016), Audi A4 Quattro Inc. Allroad (2008 - 2016),  Audi RS4 (2012-2016), Audi S4 (2009-2016), Audi A5 (2007-2016), Audi A5 Quattro (2007-2016), Audi RS5 (2010 - 2016), Audi S5 (2007 - 2016),  Audi A6 (2011 - 2018), Audi A6 Quattro (2011 - 2018), Audi RS6 (2012 - 2018), Audi S6 (2012 - 2018), Audi A7 (2010 - 2017), Audi A7 Quattro (2010 - 2017), Audi RS7 (2013 - 2017), Audi S7 (2012 - 2017) ,  Audi A8 (2010 - 2017), Audi A8 Quattro (2010 - 2017), Audi S8 Quattro (2010 - 2017), Porsche Macan 95B (2014 on), Audi Q5 (2008-2017), Audi Q5 Quattro (2008-2017), Audi SQ5 (2013 - 2017) Quantity per car 2 (Price is for amount in pack)    INSTRUCTIONS/DRAWING       

Read more less

PFC13-14 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 13-14mm --- PFC15-16 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 15-16mm --- PFC17-18 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 17-18mm --- PFC19-20 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 19-20mm --- PFC21-22 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 21-22mm --- PFC23-24 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 23-24mm --- PFC25-27 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 25-27mm --- PFC28-30 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 28-30mm --- PFC31-33 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 31-33mm

Read more less

3D / 4D Number Plate frames! These are an Acrylic frame that your number plate sits in to add a bit of style to your car! Made up of 3 pieces to give a full customised number plate holder! Backing Base Plate Frame Surround Coloured insert with or without logo! Price is for One Frame - if you would like front and rear, please order QTY x2 You choose the following 3 options: The colour of your Insert Which logo you want - If Any The colour of your logo! The frame of the plate is always provided in BLACK. The logo is cut out of the insert - then a second coloured logo of your choise is inserted into the gap to give it a fully smoth and professional finish! How it works? Simply insert your number plate inside the frame using either a gel or foam double sided tape - then attach the frame to your car. These are suitable for front and rear number plates. Due to the nature of acrylic, its difficult to drill without it cracking so the frame needs to be stuck to the vehicle. We do offer a full fitting kit as well which is smaller double sided acrylic rectangles that attach to the back side of the frame and again to the car. Fitment: Please be aware these require a FLAT SURFACE to be adhered to, For the rear which has the beveled recesses for the holes our fitting kit will allow fitment, however, due to their weight and inability to be drilled you will struggle to insert these plates over say a honeycomb or mesh grill. In these instances it may be worth just ordering for the rear!  It is important you fully prepare the area before sticking these in place to prevent loss. If the plate falls off your vehicle and is damaged or lost sadly this is not covered under warranty. If you require any customisation please get in touch via Email or Whatsapp, If we can do this - we will. This may incur additional costs however!

Read more less