Performance - Audi Q3 8U 2011-2018

The price is for ONE PAIR of spacers - if you wish to do all 4 spacers, you need to order QTY x2 All prices INCLUDE Longer Bolts where required.  The Wheel Spacers Detailed Below Also fits the following Vehicles: Manufacturer Vehicle Model Year AUDI A1 A1 SPORTBACK (GBA) 07.18 - AUDI A3 A3 / S3 / RS3 (8P1) 05.03 -08.12 AUDI A3 A3 / S3 / RS3 (8V) 04.12 - 10.20 AUDI A3 A3 / S3 / RS3 (8Y) 04.20 - AUDI A4 A4 / S4 / RS4 (B6) 11.00 - 12.04 AUDI A4 A4 / S4 / RS4 (B7) 11.04 - 06.08 AUDI A6 A6 / S6 / RS6 (C5) 01.97 - 01.05 AUDI A6 A6 / S6 / RS6 (C6) 05.04 - 03.11 AUDI A8 A8 (4D2, 4D8) 03.94 - 12.02 AUDI A8 A8 (4E_) 10.02 - 07.10 AUDI Q2 Q2 / SQ2 (GAB) 06.16 - AUDI Q3 Q3 / SQ3 / RSQ3 (8UB, 8UG) 06.11 - 10.18 AUDI Q3 Q3 / SQ3 / RSQ3 (F3B) 07.18 - AUDI Q4 Q4 (F4B) 03.21 - AUDI TT TT / TTS / TTRS (8J3) 08.06 - 06.14 AUDI TT TT / TTS / TTRS (8S) 07.14 - CUPRA ATECA ATECA (KH7) 09.18 - CUPRA BORN BORN (K11) 08.21 - CUPRA FORMENTOR FORMENTOR (KM7) 07.20 - CUPRA LEON LEON (KL1, KU1) INC ST 09.20 - FORD GALAXY GALAXY (WGR) 03.95 - 05.06 MG MG5 MG5 Kombi / MG5 Estate 10.20 - MG MG6 II MG6 II 11.17 - 12.19 SEAT ALHAMBRA ALHAMBRA (7V8, 7V9) 04.96 - 03.10 SEAT ALHAMBRA ALHAMBRA (710, 711) 06.10 - SEAT ALTEA ALTEA (5P1) 03.04 - SEAT ALTEA ALTEA XL (5P5, 5P8) 10.06 - SEAT ATECA ATECA (KH7) 04.16 - SEAT ARONA ARONA (KJ7) 07.17 - SEAT EXEO EXEO (3R2) 12.08 - SEAT EXEO EXEO ST (3R5) / EXEO STATION WAGON (3R5) 05.09 - SEAT IBIZA IBIZA V (KJ1) 01.17 - SEAT LEON LEON (1P1) 05.05-12.12 SEAT LEON LEON (5F1) INC ST 09.12 - SEAT LEON LEON (KL1) INC ST 11.19 - SEAT TARRACO TARRACO (KN2_) 09.18 - SEAT TOLEDO TOLEDO III (5P2) 04.04 - 05.09 SEAT TOLEDO TOLEDO IV (KG3) 07.12 - SKODA ENYAQ ENYAQ iV COUPE 05.22 - SKODA FABIA FABIA IV (PJ3) 06.21 - SKODA KAMIQ KAMIQ (NW4) 07.19 - SKODA KAROQ KAROQ (NU7) 07.17 - SKODA KODIAQ KODIAQ (NS7) 10.16 - SKODA KODIAQ KODIAQ (PS7) 01.24 - SKODA OCTAVIA OCTAVIA II (1Z3) 02.04 - 06.13 SKODA OCTAVIA OCTAVIA III (5E3, NL3, NR3) 11.12 - SKODA OCTAVIA OCTAVIA IV (NX3) 01.20 - SKODA RAPID RAPID (NH3) 07.12 - SKODA SCALA 02.19 - SKODA SUPERB SUPERB II (3T4) 03.08 - SKODA SUPERB SUPERB III (3V3) 03.15 - SKODA SUPERB SUPERB IV KOMBI (NZ5) / ESTATE (NZ5) 11.23 - SKODA YETI YETI (5L) 05.09 - VW ARTEON ARTEON (3H7, 3H8) 04.17 - VW BEETLE BEETLE (5C1) 04.11 - VW CADDY MK3 03.04 - VW CADDY MK4 05.15 - VW CADDY MK4 09.20 - VW CC 11.11 - 12.16 VW EOS EOS (1F7, 1F8) 03.06 - VW GOLF V MK5 10.03 - 02.09 VW GOLF VI MK6 01.05 - 12.13 VW GOLF VII MK7 08.12 - VW GOLF VIII MK8 11.20 - VW ID.3 ID.3 (E11) 11.19 - VW ID.4 ID.4 (E21) 09.20 - VW ID.5 ID.5 (E39) 07.21 - VW ID.7 ID.7 (ED) 06.23 - VW ID.BUZZ ID.Buzz Bus (EBB/EBA) 05.22 - VW JETTA JETTA III (1K2) 08.05 - 10.10 VW JETTA JETTA IV (162) 04.10 - VW PASSAT PASSAT (3B2) 08.96 - 12.01 VW PASSAT PASSAT (3B3) 11.00 - 08.05 VW PASSAT PASSAT (3C2) 03.05 - VW PASSAT PASSAT CC (357) 05.08 - 01.12 VW PASSAT PASSAT (3G2) 08.14 - VW PASSAT B9 10.23 - VW PHAETON PHAETON (3D_) 04.02 - VW POLO POLO (AW1, BZ1) 06.17 - VW SCIROCCO MK3 05.08 - VW SHARAN SHARAN (7M8, 7M9, 7M6) 05.95 - 03.10 VW SHARAN SHARAN (7N1, 7N2) 05.10 - VW T-CROSS T-CROSS (C11_) 12.18 - VW T-ROC T-ROC (A11) 07.17 - VW TAIGO TAIGO (CS1) 09.21 - VW TIGUAN TIGUAN (5N_) 09.07 - VW TIGUAN TIGUAN (AD1) 02.16 - VW TIGUAN TIGUAN (CT1) 09.23 - VW TOURAN TOURAN (1T1, 1T2) 02.03 - 05.10 VW TOURAN TOURAN (1T3) | GOLF TOURAN 05.10 - 05.15 VW T4 T4 09.90 - 04.03 The Table Below Shows Each Spacer Size & System: Spacer Width Total Car Widening System Number 5mm 10mm 1 8mm 16mm 2 10mm 20mm 2 12mm 24mm 2 15mm 30mm 2 18mm 36mm 2 20mm 40mm 2 20mm 40mm 7 22mm 44mm 2 25mm 50mm 7 30mm 60mm 7

Read more less

This is a performance enhancing induction kit for the VAG 1.2 & 1.4 TSI TFSI EA211 engine. This may fit other VAG vehicles with this engine, please see vehicle fitment compatibility chart. Features Improved throttle response Reduced turbo lag Turbocharger feels more responsive Enhanced BOV sounds What Does It Do? This induction kit delivers increased air flow over the standard restrictive part. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black powdercoated turbo inlet pipe Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2014-2018 Audi A1 (8X) 1.2 TFSI 2014-2019 Skoda Octavia (MK3) 1.2 TSI 2014-2019 Seat Toledo (KG) 1.2 TSI 2014-2019 Seat Leon (MK3) 1.2 TSI 2014-2019 Seat Ibiza (6J/6P) 1.2 TSI 2014-2019 Skoda Rapid (NH) 1.2 TSI 2014-2019 Skoda Yeti (5L) 1.2 TSI 2014-2019 Skoda Fabia (NJ) 1.2 TSI 2014-2019 VW Golf (MK7) 1.2 TSI 2014-2019 VW Touran (MK2) 1.2 TSI 2014-2019 VW Beetle (A5) 1.2 TSI 2014-2019 VW Caddy (MK4) 1.2 TSI 2014-2019 VW Polo (6R/6C) 1.2 TSI 2014-2019 VW Jetta (A6) 1.2 TSI 2014-2019 Audi A3 (8V) 1.2 TSI 2014-2019 Audi Q3 (8UB/8UG) 1.4 TFSI 2014-2018 Audi A1 (8X) 1.4 TFSI 2014-2019 Audi Q2 (GA) 1.4 TFSI 2014-2019 Audi A3 (8V) 1.4 TFSI 2014-2019 Seat Toledo (KG) 1.4 TSI 2014-2019 Seat Alhambra (MK2) 1.4 TSI 2014-2019 Seat Ateca (KH) 1.4 TSI 2014-2019 Seat Leon (MK3) 1.4 TSI 2014-2019 Seat Ibiza (6J/6P) 1.4 TSI 2014-2019 Skoda Octavia (MK3) 1.4 TSI 2014-2019 Skoda Superb (MK3) 1.4 TSI 2014-2019 Skoda Rapid (NH) 1.4 TSI 2014-2019 Skoda Yeti (5L) 1.4 TSI 2014-2019 Skoda Fabia VRS (NJ) 1.4 TSI 2014-2019 Skoda Kodiaq (NS) 1.4 TSI 2014-2019 VW Golf (MK7) 1.4 TSI 2014-2019 VW Tiguan (5N) 1.4 TSI 2014-2019 VW Tiguan (AD/BW) 1.4 TSI 2014-2019 VW Tiguan Allspace (AD/BW) 1.4 TSI 2014-2019 VW Passat (3G) 1.4 TSI 2014-2019 VW Beetle (A5) 1.4 TSI 2014-2019 VW Caddy (MK4) 1.4 TSI 2014-2019 VW Passat (CC) 1.4 TSI 2014-2019 VW Polo (6R/6C) 1.4 TSI 2014-2019 VW Touran (MK2) 1.4 TSI 2014-2019 VW Polo Blue GT (6R/6C) 1.4 TSI 2014-2019 VW Scirocco (MK3) 1.4 TSI 2014-2019 VW Sharan (MK2) 1.4 TSI 2014-2019 VW Jetta (A6) 1.4 TSI

Read more less

This is a performance silicone intake hose for 1.2 & 1.4 TSI TFSI EA211 engine. This kit fits other VAG vehicles with this engine, please see vehicle fitment compatibility chart. Features Improved throttle response Silicone inlet pipe Dyno results: max gains 5-7bhp (this may vary dependant on vehicle) What Does It Do? This induction silicone intake hose delivers increased air flow over the standard restrictive part. Whether this hose is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black silicone inlet pipe Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2014-2018 Audi A1 (8X) 1.2 TFSI 2014-2019 Skoda Octavia (MK3) 1.2 TSI 2014-2019 Seat Toledo (KG) 1.2 TSI 2014-2019 Seat Leon (MK3) 1.2 TSI 2014-2019 Seat Ibiza (6J/6P) 1.2 TSI 2014-2019 Skoda Rapid (NH) 1.2 TSI 2014-2019 Skoda Yeti (5L) 1.2 TSI 2014-2019 Skoda Fabia (NJ) 1.2 TSI 2014-2019 VW Golf (MK7) 1.2 TSI 2014-2019 VW Touran (MK2) 1.2 TSI 2014-2019 VW Beetle (A5) 1.2 TSI 2014-2019 VW Caddy (MK4) 1.2 TSI 2014-2019 VW Polo (6R/6C) 1.2 TSI 2014-2019 VW Jetta (A6) 1.2 TSI 2014-2019 Audi A3 (8V) 1.2 TSI 2014-2019 Audi Q3 (8UB/8UG) 1.4 TFSI 2014-2018 Audi A1 (8X) 1.4 TFSI 2014-2019 Audi Q2 (GA) 1.4 TFSI 2014-2019 Audi A3 (8V) 1.4 TFSI 2014-2019 Seat Toledo (KG) 1.4 TSI 2014-2019 Seat Alhambra (MK2) 1.4 TSI 2014-2019 Seat Ateca (KH) 1.4 TSI 2014-2019 Seat Leon (MK3) 1.4 TSI 2014-2019 Seat Ibiza (6J/6P) 1.4 TSI 2014-2019 Skoda Octavia (MK3) 1.4 TSI 2014-2019 Skoda Superb (MK3) 1.4 TSI 2014-2019 Skoda Rapid (NH) 1.4 TSI 2014-2019 Skoda Yeti (5L) 1.4 TSI 2014-2019 Skoda Fabia VRS (NJ) 1.4 TSI 2014-2019 Skoda Kodiaq (NS) 1.4 TSI 2014-2019 VW Golf (MK7) 1.4 TSI 2014-2019 VW Tiguan (5N) 1.4 TSI 2014-2019 VW Tiguan (AD/BW) 1.4 TSI 2014-2019 VW Tiguan Allspace (AD/BW) 1.4 TSI 2014-2019 VW Passat (3G) 1.4 TSI 2014-2019 VW Beetle (A5) 1.4 TSI 2014-2019 VW Caddy (MK4) 1.4 TSI 2014-2019 VW Passat (CC) 1.4 TSI 2014-2019 VW Polo (6R/6C) 1.4 TSI 2014-2019 VW Touran (MK2) 1.4 TSI 2014-2019 VW Polo Blue GT (6R/6C) 1.4 TSI 2014-2019 VW Scirocco (MK3) 1.4 TSI 2014-2019 VW Sharan (MK2) 1.4 TSI 2014-2019 VW Jetta (A6) 1.4 TSI

Read more less

Please note: spacers are sold as PAIRS! if you want to do front and rear than qty x2 is needed! Even better driving dynamics and more exciting looks: H&R TRAK+ wheel spacers make your car even sportier! By moving the wheel out from the hub, TRAK+ wheel spacers widen the stance of the vehicle and lower its roll center. This simple modification increases lateral stability, which in turn provides improved handling, greater safety and of course, the sleek style you’ve been looking for. Like all of H&R’s street-engineered products, H&R TRAK+ wheel spacers are certified by the German Technical Inspection Agency (TÜV). H&R also has the correct wheel bolts or nuts to install TRAK+ wheel spacers on most cars, with original or aftermarket wheels. 40mm overall Axle spacers High strength, light weight aluminum/magnesium alloy CNC machined Anodized for optimum corrosion protection Available for most domestic and imported automobiles For use with original or aftermarket wheels (Studs may need shortening if aperture in rear of alloy wheel is not sufficient for clearance) Compatible with all suspension designs TUV approved SPECIFICATIONS Track widening per axle [mm] 40 Thickness [mm] 20 Number of Holes 5.0 Bolt Hole Circle Ø [mm] 112 Centering Diameter [mm] 57.1 Colour Black Registration Type with TÜV® certificate   Please note, Due to the nature and complexity of a wheel spacer, customers MUST know that the size they are ordering is correct prior to ordering by measuring your stud length and wheel groove depth. Unfortunately, if over tightened the integrity of the spacer and / or bolts can be compromised - and due to this, any spacer that has been fitted, trial fitted or removed from its packaging can not be returned! Please be aware of this as by ordering you agree to this!

Read more less

Make Model Sub-Model Engine Engine Type BHP Year Special Comments Front Brake Caliper Type AUDI Q3 8U 1.4 Turbo 125 2016-2018 ATE AUDI Q3 8U 1.4 Turbo 150 2014-2015 ATE AUDI Q3 8U 1.4 Turbo 150 2015-2018 ATE AUDI Q3 8U 2.0 Turbo Diesel 140 2011-2015 ATE AUDI Q3 8U 2.0 Turbo Diesel 140 2015-2018 ATE AUDI Q3 8U 2.0 Turbo Diesel 177 2013-2015 ATE AUDI Q3 8U 2.0 Turbo Diesel 177 2015-2018 ATE AUDI Q3 quattro 8U 2.0 Turbo 170 2011-2015 ATE AUDI Q3 quattro 8U 2.0 Turbo 170 2015-2018 ATE AUDI Q3 quattro 8U 2.0 Turbo 180 2015-2018 ATE AUDI Q3 quattro 8U 2.0 Turbo 211 2011-2015 ATE AUDI Q3 quattro 8U 2.0 Turbo 211 2015-2018 ATE AUDI Q3 quattro 8U 2.0 Turbo Diesel 140 2012-2015 ATE AUDI Q3 quattro 8U 2.0 Turbo Diesel 140 2015-2018 ATE AUDI Q3 quattro 8U 2.0 Turbo Diesel 177 2011-2015 ATE AUDI Q3 quattro 8U 2.0 Turbo Diesel 177 2015-2018 ATE

Read more less

This Performance intake kit is designed to fit the MK7 Volkswagen Golf, Audi, Seat Leon, and Skoda that have the EA211 - 1.4 TSI/TFSI engine. Features 70mm intake diameter Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions Easy to clean using our filter maintance kit - CK-003 What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits, see below for what this kit will include: Black powder coated heat shield Ramair Foam Filter Black powder coated aluminium intake pipe PVC intake ducting Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2014-2019 Audi Q3 (8UB/8UG) 1.4 TFSI 2014-2018 Audi A1 (8X) 1.2 TFSI 2014-2018 Audi A1 (8X) 1.4 TFSI 2014-2019 Audi Q2 (GA) 1.4 TFSI 2014-2019 Skoda Octavia (MK3) 1.2 TSI 2014-2019 Seat Toledo (KG) 1.4 TSI 2014-2019 Seat Toledo (KG) 1.2 TSI 2014-2019 Seat Alhambra (MK2) 1.4 TSI 2014-2019 Seat Ateca (KH) 1.4 TSI 2014-2019 Seat Leon (MK3) 1.2 TSI 2014-2019 Seat Leon (MK3) 1.4 TSI 2014-2019 Seat Ibiza (6J/6P) 1.4 TSI 2014-2019 Seat Ibiza (6J/6P) 1.2 TSI 2014-2019 Skoda Octavia (MK3) 1.4 TSI 2014-2019 Skoda Superb (MK3) 1.4 TSI 2014-2019 Skoda Rapid (NH) 1.4 TSI 2014-2019 Skoda Rapid (NH) 1.2 TSI 2014-2019 Skoda Yeti (5L) 1.2 TSI 2014-2019 Skoda Yeti (5L) 1.4 TSI 2014-2019 Skoda Fabia VRS (NJ) 1.4 TSI 2014-2019 Skoda Kodiaq (NS) 1.4 TSI 2014-2019 Skoda Fabia (NJ) 1.2 TSI 2014-2019 VW Golf (MK7) 1.2 TSI 2014-2019 VW Golf (MK7) 1.4 TSI 2014-2019 VW Tiguan (5N) 1.4 TSI 2014-2019 VW Touran (MK2) 1.2 TSI 2014-2019 VW Tiguan (AD/BW) 1.4 TSI 2014-2019 VW Tiguan Allspace (AD/BW) 1.4 TSI 2014-2019 VW Passat (3G) 1.4 TSI 2014-2019 VW Beetle (A5) 1.2 TSI 2014-2019 VW Caddy (MK4) 1.2 TSI 2014-2019 VW Beetle (A5) 1.4 TSI 2014-2019 VW Caddy (MK4) 1.4 TSI 2014-2019 VW Passat (CC) 1.4 TSI 2014-2019 VW Polo (6R/6C) 1.2 TSI 2014-2019 VW Polo (6R/6C) 1.4 TSI 2014-2019 VW Touran (MK2) 1.4 TSI 2014-2019 VW Polo Blue GT (6R/6C) 1.4 TSI 2014-2019 VW Scirocco (MK3) 1.4 TSI 2014-2019 VW Sharan (MK2) 1.4 TSI 2014-2019 VW Jetta (A6) 1.4 TSI 2014-2019 VW Jetta (A6) 1.2 TSI 2014-2019 Audi A3 (8V) 1.2 TSI 2014-2019 Audi A3 (8V) 1.4 TFSI

Read more less

This Performance intake kit is designed to fit the 2.0 TSI EA888 engines with 80mm MAF found in the 2004 – 2011 MK5 platform and Gen 3 versions of the Scirocco and Jetta with the 2.0T EA888 engines. Features 80mm intake diameter Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions Easy to clean using our filter maintance kit - CK-003 What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. Year Make Model Engine 2014-2018 VW Beetle (5C) 2.0 TSI 2013-2016 VW Golf (MK6) 2.0 TSI 2014-2018 Audi Q3 (8UB/8UG) 2.0 TFSI 2013-2017 VW Scirocco (MK3) 2.0 TSI What Will I Get? Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include: Black powder coated heat shield Ramair foam filter Black silicone intake pipe Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following:

Read more less

This Performance intake kit is designed to fit the Volkswagen Golf MK8 GTI and R that have the 2.0 TSI/TFSI engine. Features 80mm intake diameter Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions Easy to clean using our filter maintance kit - CK-003 What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include: Black powder coated heat shield Ramair foam filter Black silicone intake pipe Full fitting kit with easy step by step instructions Videos Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2014-2021 Audi TT (FV) 2.0 TFSI 2015-2021 Seat Alhambra (MK2) 2.0 TSI 2018-2021 VW Arteon (3H) 2.0 TSI 2018-2021 Cupra Ateca (KH) 2.0 TSI 2018-2021 Cupra Formentor (KM7) 2.0 TSI 2013-2021 VW Golf GTi (MK7) 2.0 TSI 2016-2021 VW Golf GTi Clubsport (MK7) 2.0 TSI 2013-2021 VW Golf R (MK7) 2.0 TSI 2013-2021 Seat Leon Cupra (MK3) 2.0 TSI 2013-2021 Seat Leon ST (MK3) 2.0 TSI 2013-2021 Skoda Octavia RS (MK3) 2.0 TSI 2015-2021 VW Passat (B8) 2.0 TSI 2018-2021 Audi SQ2 (GA) 2.0 TFSI 2015-2018 Audi Q3 (8UB/8UG) 2.0 TFSI 2019-2021 VW T-Roc R (MK1) 2.0 TSI 2016-2024 VW Tiguan (AD/BW) 2.0 TSI 2018-2023 VW Touareg (CR/RC) 2.0 TSI 2020-2025 VW Golf R (MK8) 2.0 TSI 2020-2025 VW Golf GTi (MK8) 2.0 TSI 2020-2025 VW Golf GTi Clubsport (MK8) 2.0 TSI 2020-2025 Audi S3 (8Y) 2.0 TFSI 2020-2025 Audi A3 (8Y) 2.0 TFSI

Read more less

APR Ignition Coils are designed to be a direct plug-and-play upgrade to factory coils, and provide greater energy output, ensuring a stronger and more consistent spark. The commonplace replacement of factory ignition coils with those taken from the higher output Audi R8 is popularly believed to provide greater energy output. However, testing proves that they are no more powerful than the factory coils that are found on other engines. APR Ignition Coils increase energy output by up to 10% over stock. They are a direct upgrade or replacement, and come with a unique red housing! Features: Up to 10% more energy output than stock Red housing with APR Logo True upgrade, not just aesthetic Direct plug-and-play Suitable for the following engines: - 1.8T EA888 Gen 1 (Requires 4x)- 2.0T EA113 (Requires 4x)- 2.0T EA888 Gen 1 (Requires 4x)- 2.5 TFSI  Pre 2017 (Requires 5x)- 3.0 V6 Supercharged (Requires 6x)- 4.2 V8 FSI RS4 / RS5 etc. (Requires 8x)These are sold indivually, so you will need to add the number required. If you are unsure which engine you have, please contact our team before purchasing. fits: Shop By Car/Audi/RS4 (B8) Shop By Car/Audi/Q3 (Mk1 11-18) Shop By Car/Audi/A6 (C7) Shop By Car/Audi/A6 (C6) Shop By Car/Skoda/Yeti Shop By Car/SEAT/CUPRA/Toledo Mk3 (5P) Shop By Car/SEAT/CUPRA/Leon Mk2 (1P) Shop By Car/Audi/TT Mk2 (8J) Shop By Car/Audi/RS5 (B8) Shop By Car/Audi/RS4 (B7) Shop By Car/Audi/RS3 (8P) Shop By Car/Audi/A7 (4G8 10-17) Shop By Car/Audi/A5 (B8) Shop By Car/Audi/A4 (B8) Shop By Car/Audi/A4 (B7) Shop By Car/Volkswagen/Tiguan (Mk1) Shop By Car/Volkswagen/Passat CC Shop By Car/Volkswagen/Passat B6 Shop By Car/Volkswagen/EOS Shop By Car/Volkswagen/Scirocco Shop By Car/Volkswagen/Golf Mk5 Shop By Car/Volkswagen/Golf Mk6 Shop By Car/Audi/RS3 (8V) Shop By Car/Skoda/Superb (3T 08-15) Shop By Car/Audi/A3 (8P 03-13) Shop By Car/Audi/S3 (8P) Shop By Car/Audi/S4 (B8) Shop By Car/Audi/S5 (B8) Shop By Car/Audi/TT RS (8J) Shop By Car/Skoda/Octavia Mk2 (1Z)

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

 compatible for: Audi A3 1.8/2.0 TSI 2015 Onwards Q3 2.0 TSI (2015-2018) S3 2.0 TSI (8V Chassis) 2.0TSI (8Y Chassis) Sportback 2.0TSI (8Y Chassis) SQ2 2.0TSI (2018-2021) TT Mk2 2.0  A31.8/2.0 TSI 2015 Onwards Q32.0 TSI (2015-2018) S3 2.0 TSI (8V Chassis) 2.0TSI (8Y Chassis) Sportback 2.0TSI (8Y Chassis) SQ22.0TSI (2018-2021) TTMk2 Cupra Ateca VZ1, VZ2, VZ3, VZN 2021- Formentor 2.0 TSI (245 BHP) 2.0 TSI (310 BHP) Leon VZ1, VZ2, VZ3 Seat Leon Mk3 2012-2020 Skoda Kodiaq 2.0TSI (EA888 Gen 3) RS 2021- Octavia VRS 2.0 TSI 2013 Onwards Octavia 4 RS Superb 280 4x4 DSG Volkswagen Arteon 2.0 TSI Golf MK7 1.8 TFSI GTI GTI Clubsport ED40 R MK7.5 GTI  R MK8 Clubsport 45 GTI GTI S R Jetta MK7 (2018-2021) 2.0 GLI MK7.5 (2021-) 2.0 GLI Passat 2.0 TSI (2015-2021) T-Roc 2.0 2018-2021 Tiguan 2.0 TSI 2017 Onwards R 2022 Onwards (Gen 4) Touareg 2.0 TSI (2018-2021) Product Description Highlights: Power gains of up to 13BHP (when paired with the appropriate turbo inlet adaptor) Torque gains of up to 17NM (when paired with the appropriate turbo inlet adaptor) Pleated or foam filter available Greater engine sound Made in the UK Lifetime guarantee With our in-house VW Golf MK8R development vehicle we have been able to complete thorough testing on the EA888 gen4 platform, from rolling roads to track time. This has allowed us to create FMINDK44, the second induction kit we have available for the EA888 gen 3 and gen 4 platform (alongside our carbon fibre variant, FMINDK40). This kit features either a Forge Motorsport Ram Air high flow, pleated, synthetic nanofiber filtration filter or a Pipercross foam filter. Both are manufactured for optimum size and fit to the available space giving superior flow and filtration with enhanced breathing for the 2.0 turbo charged engine. It also features a larger surface area than the stock filter and many competitors’ alternatives. The intake diameter has been carefully tuned to provide exactly the correct quantity of air for consistent power gains throughout the rev range and minimising the chance of low-end torque loss; the pipework is specifically designed to feed the turbo without interruption. The result of this is a gain of induction acoustics under acceleration, which improves the driving experience and adds a bit more drama to the EA888 engine. With the use of SolidWorks, our CAD engineers have designed the heat shroud to fit round all the contours of the engine bay. This shroud combined with our specially formulated thermal coatings protects the intake from radiant heat while also guiding the cold air from the OE cold air ducting to the filter and housing. The majority of our dyno testing was done on our VW Golf R MK8 EA888 Gen 4, as such you may find slight variations in gains when fitted to other vehicles sharing this engine. During the final prototypes testing we found that the induction kit with stock turbo inlet produced gains on average of 3.5BHP. However, when paired with our turbo inlet adaptor FMTIA5 (RHD), FMTIA6, or FMTIA9 (LHD), or FMINLMK7, this is where the stock EA888 gen4 engine saw impressive gains, increasing power up to 13BHP at 6500RPM with a significant average power increase from 4500RPM to the 6700RPM Rev limit of 8BHP; while the drivability and the punch from extra torque increases can be felt on the road at between 4000RPM to the rev limit an average gain of 17NM is achieved. It’s worth remembering that this is with a stock ECU and no tune, so we would expect to see mapped cars returning even greater yields of power.     Why Do We Try To Decrease Inlet Air Temperatures (IAT’S)? By utilising the OEM cold air feed, and keeping the heat shield open on the headlight corner side we were able to see a decrease in IAT’s compared to the OEM during testing. By ensuring that the intake heat shield is open on this side it also means that vehicles being tuned to stage 2/3+ have a reduced risk of being restricted with them pulling in a greater quantity of air. Temperature and volume of air supplied to your vehicles engine that is compressed by the turbo charger has a better effect on performance when cool as this is to provide the engine with more oxygen (denser air), thus improving the combustion in each cylinder. In addition, by regulating and reducing the air temperature, it also increases the reliability of an engine by keeping the AFRs (Air Fuel Ratios) in each cylinder at a safe level, which in turn can increase an engines power due to the air being cooler. A bigger bang is then created within the cylinder, providing the correct amount of fuel is added. This can equate to an increase in BHP and torque. It’s worth noting that this induction kit offers a massive amount of air to the EA888 engine, which is a must for anyone looking to push the performance when tuning to stage1, stage 2 and beyond. Not only do you get the bhp performance benefits, but FMINDK44 also offers a greater sound from the engine; particularly when on boost, and our product testers have reported a more responsive throttle too. Careful consideration into the other platforms that share the same engine configurations had also been at the forefront of our development engineers’ minds. This needed various vehicles to be sourced to ensure a perfect fit for many of the VAG groups performance vehicles. You have only got to look at our compatibility list to realise how much research and development has gone into this extraordinary performance induction kit. The kit comes complete with everything you need for installation, which can be carried out in around 1 hour, including a set of full colour instructions. For such an easy to fit product it truly does create some remarkable gains. The kit has been designed not just to increase power but to fit a whole range of vehicles on the MQB platform. This goes as far as to include cars using the OEM turbo elbow and the Forge Motorsport FMTIA5/FMTIA6/FMTIA9 high flow elbows. With FMTIA5/FMTIA6/FMTIA9 using multi ply silicone, it has minimal flex; however the OEM inlet hose uses an accordion rib design which could cause the filter to damage itself or the heat shield. Unlike our competitors, we have included a P-clip and tab on the back of the heat shield, allowing the OEM inlet hose to be secured to the heat shield, meaning no damage and no annoying rattles! Time taken to install - around 1 hour

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

Introducing the Enhanced Edition LED H7 Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in ANY H7 Fitments and replaces the OEM lamp unit for an ultra bright replacement. This bulb can be used as a dipped & high beam upgrade as well as a foglight. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! No longer any need for clips & caps! The bulb is designed to fit in any H7 fixing without any adjustments or additional items, and utilising its 4 point technology, this can be orientated in either 2 or 4 location points to ensure the best output and zero polarity issues! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H7 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H7 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped & high beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H8 or H11 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H8/11 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

For hydraulic brake and clutch systems. Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3) Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual. Min. dry boiling point 260°C. Min. wet boiling point 165°C Notice Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs. Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water.  DOT 4 Technical Info Contents 500 ml Colour Pale Amber Chemical basis Butoxyethanol Shelf life from production 36 Month Min. wet boiling point 165 °C Min. dry boiling point 260 °C Density 1.052 g/ml Density conditions at 20°C pH value 7-11

Read more less

Modern direct injection engines are efficient and powerful, but are prone to carbon deposits that build up inside the intake port and on the back-side of intake valves. These deposits rob the engine of power and efficiency. Traditional methods of manually removing these deposits can be difficult, time consuming, and expensive. The 034Motorsport Direct Injection Head Port Cleaning Tool makes short and easy work of removing these deposits from your intake ports and valves. The tool has a small port for a media blasting wand and a large port that connects to a shop vacuum hose. The vacuum generated by the shop vac holds the tool in place up against the intake port, freeing your hands to focus on the media blasting. To use, simply rotate the crankshaft to close the intake valves in a given intake port before positioning the Direct Injection Head Port Cleaning Tool on the intake port. Turn on the vacuum and media blast away. All of the blasting media is sucked into the shop vac, making the entire process quick and easy, with little to no clean-up necessary afterwards. Features:Machined from Billet 6061-T6 Aluminum For DurabilityClear Anodized for an Attractive, Corrosion Resistant FinishFits Standard 40mm (1 1/2") ShopVac HoseAccommodates Media Blast Wands Up to 10mm (3/8") in DiameterMakes Carbon Cleaning of Direct Injection VAG Engines Much Easier and Faster What's Included:Direct Injection Head Port Cleaning Tool (x1)Lots of Additional Free Time Fitment Guide:See Fitment Guide Tab for Extensive List of Applications Frequently Asked Questions:Does this fit the cylinder head without injector removal? - YESDoes this fit the B7 RS4 heads without injector removal? - YESNote: For 2.0 motors, it is easier to use this tool with the injectors removed, and the 2.0 injectors are easy to remove.   Suitable for: Shop By Car/Audi/RS7 (C7) Shop By Car/Audi/Q3 (Mk1 11-18) Shop By Car/Audi/A6 (C7) Car Care/Tools Shop By Car/Audi/A6 (C6) Shop By Car/SEAT/CUPRA/Exeo Shop By Car/Skoda/Roomster Shop By Car/SEAT/CUPRA/Ibiza Mk5 (6J) Shop By Car/Audi/TT Mk2 (8J) Shop By Car/Audi/S4 (B7) Shop By Car/Audi/S4 (B6) Shop By Car/Audi/RS5 (B8) Shop By Car/Audi/RS4 (B7) Shop By Car/Audi/RS3 (8P) Shop By Car/Audi/R8 Mk1 (42 06-15) Shop By Car/Audi/A8 Shop By Car/Audi/A7 (4G8 10-17) Shop By Car/Audi/A5 (B8) Shop By Car/Audi/A4 (B8) Shop By Car/Audi/A4 (B7) Shop By Car/Volkswagen/Tiguan (Mk1) Shop By Car/Volkswagen/Passat B6 Shop By Car/Volkswagen/EOS Shop By Car/Audi/A4 (B9) Shop By Car/Audi/A5 (B9) Shop By Car/Skoda/Fabia Mk3 (NJ) Shop By Car/Volkswagen/Tiguan (Mk2) Shop By Car/Volkswagen/Golf Mk5/Maintenance / Tools Shop By Car/Audi/S3 (8V)/Maintenance / Tools Shop By Car/SEAT/CUPRA/Ateca Shop By Car/Audi/Q2 Shop By Car/Audi/S6 (C7) Shop By Car/Volkswagen/Golf Mk7/Maintenance / Tools Shop By Car/Skoda/Karoq Shop By Car/Skoda/Kamiq Shop By Car/Volkswagen/Golf Mk6/Maintenance / Tools Shop By Car/Skoda/Octavia Mk3 (5E)/Maintenance / Tools Shop By Car/Skoda/Fabia Mk2 (5J)/Maintenance / Tools Shop By Car/Audi/S6 (C6) Shop By Car/Audi/A3 (8P 03-13)/Maintenance / Tools Shop By Car/Audi/A3 (8V 12-20)/Maintenance / Tools Shop By Car/Audi/S3 (8P)/Maintenance / Tools Shop By Car/Audi/TT Mk3 (8S)/Maintenance / Tools Shop By Car/Audi/S5 (B8)/Maintenance / Tools Shop By Car/Audi/TT RS (8J)/Maintenance / Tools Shop By Car/Skoda/Fabia Mk1 (6Y)/Maintenance / Tools Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Maintenance / Tools Shop By Car/Volkswagen/Beetle (16)/Maintenance / Tools Shop By Car/SEAT/CUPRA/Formentor Shop By Car/Audi/RS6 (C7)/Maintenance / Tools     Code: 034-034-108-Z054

Read more less

REAR UPPER WISHBONE INNER BUSH PFR85-514   OEM Part Number: Arm = 5Q0505323D / 5Q0 505 323 D OEM Part Number: Arm = 1K0505323N / 1K0 505 323 N --- REAR UPPER WISHBONE INNER BUSH PFR85-514BLK   OEM Part Number: Arm = 5Q0505323D / 5Q0 505 323 D OEM Part Number: Arm = 1K0505323N / 1K0 505 323 N --- fits: Audi A1 Quattro (2013), Audi S1 8X (2015 on), Audi A3 inc Quattro MK2 8P (2003-2012), Audi RS3 MK2 8P (2011-2013), Audi S3 MK2 8P (2006-2012), Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi RS3 MK3 8V (2015 - 2020), Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi RS3 MK4 8Y (2020 on), Seat Alhambra MK2 (2010 - ON), Seat Ateca Multi-Link (2016-ON), Volkswagen Beetle A5 Multi-Link (2011 - ON), Volkswagen Bora A5 (1K) (2005-2010), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK6 inc R 5K (2009-2012), Volkswagen Golf MK5 1K, Volkswagen Golf Mk5 GTI & R32, Volkswagen Golf Plus 5M, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK6 A6 Multi-Link (2011 - 2018), Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK5 A5 1K (2005-2010), Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon Mk2 1P (2005-2012), Skoda Octavia Mk2 1Z (2004-2012), Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Volkswagen Passat B6 & B7 Typ3C (2006-2013), Volkswagen Passat B8 (2013 on), Volkswagen Passat CC 35 (2008-2012), Audi Q2 4WD Quattro MULTI LINK, Audi Q3 8U, Audi RSQ3 8U,  Audi Q3 F3, Audi RSQ3 F3, Volkswagen Scirocco MK3 (2008 - 2017), Seat Altea 5P (2004-), Seat Tarraco (2018-), Volkswagen Sharan MK2 (2010 - ON), Skoda Kodiaq (2017 - ON), Skoda Yeti 5L (2009 - 2017), Skoda Superb (2009-2010), Skoda Superb (2010 - 2015), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen Tiguan 5N MK1 (2007 - 2017), Volkswagen Tiguan AD/BW MK2 (2017 on), Seat Toledo Mk3 5P (2004-2009), Volkswagen Touran (2003-2015), Volkswagen Touran (2017 - ), Audi TT MK2 8J (2007-2014), Audi TTRS MK2 8J (2009-2014), Audi TT / TTRS Mk3 FV/8S (2014 on), Volkswagen Vento A5 (2005 - 2010), Volkswagen Arteon (2017 on), Volkswagen CC (2012 - 2017), Volkswagen Eos 1F (2006-2016)

Read more less

REAR LOWER TRACK ROD INNER BUSH PFR85-512   OEM Part Number: Arm = 1K0501529F / 1K0 501 529 F OEM Part Number: Arm = 1K0501529J / 1K0 501 529 J OEM Part Number: Arm = 1K0501529C / 1K0 501 529 C --- REAR LOWER TRACK ROD INNER BUSH PFR85-512BLK   OEM Part Number: Arm = 1K0501529F / 1K0 501 529 F OEM Part Number: Arm = 1K0501529J / 1K0 501 529 J OEM Part Number: Arm = 1K0501529C / 1K0 501 529 C --- FITS: Audi A1 Quattro (2013), Audi A3 inc Quattro MK2 8P (2003-2012), Audi RS3 MK2 8P (2011-2013), Audi S3 MK2 8P (2006-2012), Seat Alhambra MK2 (2010 - ON), Volkswagen Beetle A5 Multi-Link (2011 - ON), Volkswagen Bora A5 (1K) (2005-2010), Volkswagen Golf MK6 inc R 5K (2009-2012), Volkswagen Golf MK5 1K, Volkswagen Golf Mk5 GTI & R32, Volkswagen Golf Plus 5M, Volkswagen Jetta MK6 A6 Multi-Link (2011 - 2018), Volkswagen Jetta MK5 A5 1K (2005-2010), Seat Leon Mk2 1P (2005-2012), Skoda Octavia Mk2 1Z (2004-2012), Volkswagen Passat B6 & B7 Typ3C (2006-2013), Volkswagen Passat CC 35 (2008-2012), Audi Q3 8U, Audi RSQ3 8U,  Volkswagen Scirocco MK3 (2008 - 2017), Seat Altea 5P (2004-), Volkswagen Sharan MK2 (2010 - ON), Skoda Yeti 5L (2009 - 2017), Skoda Superb (2009-2010), Skoda Superb (2010 - 2015), Volkswagen Tiguan 5N MK1 (2007 - 2017), Seat Toledo Mk3 5P (2004-2009), Volkswagen Touran (2003-2015), Audi TT MK2 8J (2007-2014), Audi TTRS MK2 8J (2009-2014), Volkswagen Vento A5 (2005 - 2010), Volkswagen CC (2012 - 2017), Volkswagen Eos 1F (2006-2016)

Read more less

The 034Motorsport Billet Coolant Vent Union is designed to replace the factory plastic and failure-prone coolant union on the cylinder head of the EA888 Gen3 and Gen4 engines. Being in close proximity to the turbocharger, the factory plastic coolant union is subject to a lot of heat, becoming brittle and failing over time. Upgrading to the Billet Coolant Vent Union minimizes the risk of coolant leaks, enhancing the reliability of your EA888!The 034Motorsport Billet Coolant Vent Union is machined from billet 6061-T6 aluminum, which is ideal for components exposed to high temperatures and harsh operating conditions. The Billet Coolant Vent Union is then black anodized for long-lasting looks and corrosion resistance to ensure that this upgrade is able to withstand the high temperatures next to your turbocharger. FEATURES: CNC Machined From Billet 6061-T6 Aluminum Black Anodized for Long Lasting Good Looks and Corrosion Resistance New O-Ring Preinstalled Direct Replacement of OEM Component WHAT’S INCLUDED: 034Motorsport Billet Coolant Vent Union 1x O-Ring Preinstalled VEHICLE FITMENT FOR: Shop By Car/Audi/Q3 (Mk1 11-18) Shop By Car/Audi/A6 (C7) Shop By Car/Audi/A7 (4G8 10-17) Shop By Car/Audi/A5 (B8) Shop By Car/Audi/A4 (B9) Shop By Car/Audi/A5 (B9) Shop By Car/Volkswagen/Passat B8 Shop By Car/Audi/Q5 (B9) Shop By Car/Volkswagen/Tiguan (Mk2) Shop By Car/Volkswagen/Arteon Shop By Car/Audi/S3 (8V) Shop By Car/Volkswagen/Golf Mk7 Shop By Car/Skoda/Octavia Mk3 (5E) Shop By Car/Audi/A3 (8Y 2020-) Shop By Car/Audi/A3 (8V 12-20) Shop By Car/Audi/TT Mk3 (8S) Shop By Car/SEAT/CUPRA/Leon Mk3 (5F) Shop By Car/Volkswagen/Beetle (16) Shop By Car/Audi/S3 (8Y)

Read more less

FRONT WISHBONE FRONT BUSH PFF85-501 For a camber adjustable bush use PFF85-501G. OEM Part Number: Bush = 1K0407182 / 5Q0407182 / 1K0407182A OEM Part Number: Arm = 1K0407152BG (Steel) OEM Part Number: Arm = 8J0407151D (Aluminium) --- FRONT WISHBONE FRONT BUSH PFF85-501BLK   OEM Part Number: Bush = 1K0407182 / 5Q0407182 / 1K0407182A OEM Part Number: Arm = 1K0407152BG (Steel) OEM Part Number: Arm = 8J0407151D (Aluminium) --- FRONT WISHBONE FRONT BUSH CAMBER ADJUSTABLE PFF85-501G This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. OEM Part Number: Bush = 1K0407182 / 5Q0407182 / 1K0407182A OEM Part Number: Arm = 1K0407152BG (Steel) OEM Part Number: Arm = 8J0407151D (Aluminium) --- FRONT WISHBONE FRONT BUSH CAMBER ADJUSTABLE PFF85-501GBLK This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. OEM Part Number: Bush = 1K0407182 / 5Q0407182 / 1K0407182A OEM Part Number: Arm = 1K0407152BG (Steel) OEM Part Number: Arm = 8J0407151D (Aluminium) --- FITS: Audi A3 inc Quattro MK2 8P (2003-2012), Audi RS3 MK2 8P (2011-2013), Audi S3 MK2 8P (2006-2012), Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi RS3 MK3 8V (2015 - 2020), Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Audi RS3 MK4 8Y (2020 on), Seat Alhambra MK2 (2010 - ON), Seat Ateca Multi-Link (2016-ON), Seat Ateca Rear Beam (2016-ON), Volkswagen Beetle A5 Multi-Link (2011 - ON), Volkswagen Beetle A5 Rear Beam (2011 - ON), Volkswagen Bora A5 (1K) (2005-2010), Volkswagen Caddy Mk3 Typ 2K (2004 - 06/2010), Volkswagen Caddy Mk3.5 Typ 2K (06/2010 - 2020), Volkswagen Caddy MK4 Typ SB (2020-ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK6 inc R 5K (2009-2012), Volkswagen Golf MK5 1K, Volkswagen Golf Mk5 GTI & R32, Volkswagen Golf Plus 5M, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK6 A6 Multi-Link (2011 - 2018), Volkswagen Jetta MK6 A6 Rear Beam (2011 - 2018), Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK7 A7 Rear Beam (2018-ON), Volkswagen Jetta MK5 A5 1K (2005-2010), Skoda Karoq 2WD, Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink,  Seat Leon KL Rear Beam, Seat Leon Mk2 1P (2005-2012), Skoda Octavia Mk2 1Z (2004-2012), Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Volkswagen Passat B6 & B7 Typ3C (2006-2013), Volkswagen Passat B8 (2013 on), Volkswagen Passat CC 35 (2008-2012), Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Audi Q3 8U, Audi RSQ3 8U, Audi Q3 F3, Audi RSQ3 F3, Volkswagen Scirocco MK3 (2008 - 2017), Seat Altea 5P (2004-), Seat Tarraco (2018-), Volkswagen Sharan MK2 (2010 - ON), Skoda Kodiaq (2017 - ON), Skoda Yeti 5L (2009 - 2017), Skoda Superb (2009-2010), Skoda Superb (2010 - 2015), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan 5N MK1 (2007 - 2017), Volkswagen Tiguan AD/BW MK2 (2017 on), Seat Toledo Mk3 5P (2004-2009), Volkswagen Touran (2003-2015), Volkswagen Touran (2017 - ), Ford Transit / Tourneo Connect Mk3 (2021 ON), Audi TT MK2 8J (2007-2014), Audi TTRS MK2 8J (2009-2014), Audi TT / TTRS Mk3 FV/8S (2014 on), Volkswagen Vento A5 (2005 - 2010), Volkswagen Arteon (2017 on), Volkswagen CC (2012 - 2017), Volkswagen Eos 1F (2006-2016)

Read more less

PFC13-14 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 13-14mm --- PFC15-16 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 15-16mm --- PFC17-18 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 17-18mm --- PFC19-20 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 19-20mm --- PFC21-22 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 21-22mm --- PFC23-24 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 23-24mm --- PFC25-27 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 25-27mm --- PFC28-30 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 28-30mm --- PFC31-33 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 31-33mm

Read more less

3D / 4D Number Plate frames! These are an Acrylic frame that your number plate sits in to add a bit of style to your car! Made up of 3 pieces to give a full customised number plate holder! Backing Base Plate Frame Surround Coloured insert with or without logo! Price is for One Frame - if you would like front and rear, please order QTY x2 You choose the following 3 options: The colour of your Insert Which logo you want - If Any The colour of your logo! The frame of the plate is always provided in BLACK. The logo is cut out of the insert - then a second coloured logo of your choise is inserted into the gap to give it a fully smoth and professional finish! How it works? Simply insert your number plate inside the frame using either a gel or foam double sided tape - then attach the frame to your car. These are suitable for front and rear number plates. Due to the nature of acrylic, its difficult to drill without it cracking so the frame needs to be stuck to the vehicle. We do offer a full fitting kit as well which is smaller double sided acrylic rectangles that attach to the back side of the frame and again to the car. Fitment: Please be aware these require a FLAT SURFACE to be adhered to, For the rear which has the beveled recesses for the holes our fitting kit will allow fitment, however, due to their weight and inability to be drilled you will struggle to insert these plates over say a honeycomb or mesh grill. In these instances it may be worth just ordering for the rear!  It is important you fully prepare the area before sticking these in place to prevent loss. If the plate falls off your vehicle and is damaged or lost sadly this is not covered under warranty. If you require any customisation please get in touch via Email or Whatsapp, If we can do this - we will. This may incur additional costs however!

Read more less

Here we introduce to you our #Enhanced Edition H1 LED Upgrade. This product can NOT be used as a cornering light! Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. Unlike other suppliers, CEUK has developed an LED bulb which does not require the splicing of wires and difficult intricate clips to hold the lamp in place. This unit fits in its entirety as an OEM H1 Halogen bulb would. The LED's come as standard 6000K ice white,  Its worth noting that due to the design of headlamps, different lamps and light units may give different results to those found in our pictures. Good to know. High Lumen Output Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 20,000 (10,000 Per Bulb) What's in the box 2x H1 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb V3 This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Will fit in any vehicle which takes a H8 or H11 fitting provided you have about 1 inch of space behind the bulb! Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H8/11 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.   

Read more less