Performance - Audi RS7 (C7) 4G 2010-2018
mtc MTC Motorsport - Audi Decat Downpipes 3” - Audi C7 (RS6 / RS7 / S6 / S7 / S8) (Copy)
MTC Motorsport Audi RS6 and RS7 2013+ Stainless Steel Decat Downpipes The RS6 downpipes are machined from SS304 aircraft-grade stainless steel and are tig welded in house Finished in brushed stainless The downpipes are made of 3" stainless pipe straight out of the turbo providing a sharper throttle response due to faster spool of the turbo This downpipe will provide noticeable power gains and a much more aggressive exhaust note which sounds truly amazing. Feedback from customers is that the downpipe crackles and bangs but is quiet on the motorway which is perfect. It produces lower temperatures and less exhaust backpressure due to the relief of the turbocharger. The cylinder charge is increased which contributes to maximum performance. There is also a substantial weight saving in comparison to the factory catalytic converter. The decat is mandrel-bent for better gas flow and maximum internal size to ensure ultimate performance without the loss of mid-range torque. We have tested this product and found increases of around 40-50bhp on test vehicles however, it does have the capability of increasing horsepower by 150-180bhp once your car has a stage 2 map. Will fit the following models perfectly: Audi RS6 2013-2019 Audi RS7 2013-2019 Audi S6 2013-2019 Audi S7 2013-2019 Audi S8 2013-2019 Professional installation is recommended as some exhausts sit slightly different from others and can be tight although the feedback we have received from this product is that it is very easy to fit. We recommend purchasing a Lambda Sensor Spacers to prevent the engine light coming on in most cases. If you search our other products you will find these. This product comes with a lifetime warranty.
£749.00
mtc MTC Motorsport - Audi Decat Downpipes and Mid Pipes - Audi C7 (RS6 / RS7 / S6 / S7 / S8)
MTC Motorsport Audi RS6 C7 and RS7 2013+ Stainless Steel Decat Downpipes with Mid Pipes This kit comes with the mid section that joins directly onto the standard exhaust. Please note, you will need to re-route the rear lambda sensor to fit these which is a very easy job. The RS6 downpipes and mid pipes are machined from SS304 aircraft-grade stainless steel and are tig welded in house Finished in brushed stainless They are made of 3" stainless pipe straight out of the turbo providing a sharper throttle response due to faster spool of the turbo This downpipe will provide noticeable power gains and a much more aggressive exhaust note which sounds truly amazing. Feedback from customers is that the downpipe crackles and bangs but is quiet on the motorway which is perfect. It produces lower temperatures and less exhaust backpressure due to the relief of the turbocharger. The cylinder charge is increased which contributes to maximum performance. There is also a substantial weight saving in comparison to the factory catalytic converter. The decat is mandrel-bent for better gas flow and maximum internal size to ensure ultimate performance without the loss of mid-range torque. No cutting required to fit We have tested this product and found increases of around 40-50bhp on test vehicles however, it does have the capability of increasing horsepower by 150-180bhp once your car has a stage 2 map. These pipes will fit the following models: Audi RS6 2013-2019 Audi RS7 2013-2019 Audi S6 2013-2019 Audi S7 2013-2019 Audi S8 2013-2019 Professional installation is recommended as some exhausts sit slightly different from others and can be tight although the feedback we have received from this product is that it is very easy to fit. We recommend purchasing a Lambda Sensor Spacers to prevent the engine light coming on in most cases (unless you are tuning the car). If you search our other products you will find these. This product comes with a lifetime warranty.
£849.00
PlexiClick® - Invisible Number Plate Holder Clip
This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily
£10.00
Pro Props Pro Props Carbon Fibre Bonnet / Boot / Door Show Prop
Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)
£69.99
Enhanced Edition LED H7 Mini
Introducing the Enhanced Edition LED H7 Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in ANY H7 Fitments and replaces the OEM lamp unit for an ultra bright replacement. This bulb can be used as a dipped & high beam upgrade as well as a foglight. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! No longer any need for clips & caps! The bulb is designed to fit in any H7 fixing without any adjustments or additional items, and utilising its 4 point technology, this can be orientated in either 2 or 4 location points to ensure the best output and zero polarity issues! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H7 fitting Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H7 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£54.00£42.00
Enhanced Edition LED H8/11 Mini Fog Unit
Description Introducing the Enhanced Edition LED H8/11 Fog Bulb Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped & high beam upgrade Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H8 or H11 fitting Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H8/11 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£42.00
Wurth Wurth Brake Fluid - Dot4 500ml
For hydraulic brake and clutch systems. Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3) Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual. Min. dry boiling point 260°C. Min. wet boiling point 165°C Notice Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs. Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water. DOT 4 Technical Info Contents 500 ml Colour Pale Amber Chemical basis Butoxyethanol Shelf life from production 36 Month Min. wet boiling point 165 °C Min. dry boiling point 260 °C Density 1.052 g/ml Density conditions at 20°C pH value 7-11
£10.00
Milltek Sport Milltek Sport - Cat Back Exhaust (Multiple Options) Audi RS7 C7 (Inc Performance Edition)
fits: Audi RS7 C7 Sportback 4.0 V8 TFSI biturbo inc Performance Edition 2013 to 2018 Notes: Uses OE Tips Milltek Do Not Supply The Black Valve Motors - {valve motors from the OE exhaust are required for fitment} Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis) Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.
£2,211.32 - £2,389.00
DSG "RS" Carbon Replacement Shift Knob & Gator
Genuine Carbon fibre replacement DSG shifter knob with Black Trim & button, supplied with Black Gator & Red stitching! The knob is a direct replacement, this simply has a twist clip which clips straight on once the OEM knob is removed! The gator requires attachment to the plastic trim found in your car (Existing gator is usually stapled to it!) You can use staples, glue, needle and thread or other methods to attach the new gator to your existing plastic trim. This is second to none in terms of quality and will give your audi a Premium feel, how it should be! Will only fit on vehicles with the plastic trim shape shown below. Please contact us if you are unsure
£120.00
034 Motorsport 034 Motorsport Direct Injection Head Port Cleaning Tool
Modern direct injection engines are efficient and powerful, but are prone to carbon deposits that build up inside the intake port and on the back-side of intake valves. These deposits rob the engine of power and efficiency. Traditional methods of manually removing these deposits can be difficult, time consuming, and expensive. The 034Motorsport Direct Injection Head Port Cleaning Tool makes short and easy work of removing these deposits from your intake ports and valves. The tool has a small port for a media blasting wand and a large port that connects to a shop vacuum hose. The vacuum generated by the shop vac holds the tool in place up against the intake port, freeing your hands to focus on the media blasting. To use, simply rotate the crankshaft to close the intake valves in a given intake port before positioning the Direct Injection Head Port Cleaning Tool on the intake port. Turn on the vacuum and media blast away. All of the blasting media is sucked into the shop vac, making the entire process quick and easy, with little to no clean-up necessary afterwards. Features:Machined from Billet 6061-T6 Aluminum For DurabilityClear Anodized for an Attractive, Corrosion Resistant FinishFits Standard 40mm (1 1/2") ShopVac HoseAccommodates Media Blast Wands Up to 10mm (3/8") in DiameterMakes Carbon Cleaning of Direct Injection VAG Engines Much Easier and Faster What's Included:Direct Injection Head Port Cleaning Tool (x1)Lots of Additional Free Time Fitment Guide:See Fitment Guide Tab for Extensive List of Applications Frequently Asked Questions:Does this fit the cylinder head without injector removal? - YESDoes this fit the B7 RS4 heads without injector removal? - YESNote: For 2.0 motors, it is easier to use this tool with the injectors removed, and the 2.0 injectors are easy to remove. Suitable for: Shop By Car/Audi/RS7 (C7) Shop By Car/Audi/Q3 (Mk1 11-18) Shop By Car/Audi/A6 (C7) Car Care/Tools Shop By Car/Audi/A6 (C6) Shop By Car/SEAT/CUPRA/Exeo Shop By Car/Skoda/Roomster Shop By Car/SEAT/CUPRA/Ibiza Mk5 (6J) Shop By Car/Audi/TT Mk2 (8J) Shop By Car/Audi/S4 (B7) Shop By Car/Audi/S4 (B6) Shop By Car/Audi/RS5 (B8) Shop By Car/Audi/RS4 (B7) Shop By Car/Audi/RS3 (8P) Shop By Car/Audi/R8 Mk1 (42 06-15) Shop By Car/Audi/A8 Shop By Car/Audi/A7 (4G8 10-17) Shop By Car/Audi/A5 (B8) Shop By Car/Audi/A4 (B8) Shop By Car/Audi/A4 (B7) Shop By Car/Volkswagen/Tiguan (Mk1) Shop By Car/Volkswagen/Passat B6 Shop By Car/Volkswagen/EOS Shop By Car/Audi/A4 (B9) Shop By Car/Audi/A5 (B9) Shop By Car/Skoda/Fabia Mk3 (NJ) Shop By Car/Volkswagen/Tiguan (Mk2) Shop By Car/Volkswagen/Golf Mk5/Maintenance / Tools Shop By Car/Audi/S3 (8V)/Maintenance / Tools Shop By Car/SEAT/CUPRA/Ateca Shop By Car/Audi/Q2 Shop By Car/Audi/S6 (C7) Shop By Car/Volkswagen/Golf Mk7/Maintenance / Tools Shop By Car/Skoda/Karoq Shop By Car/Skoda/Kamiq Shop By Car/Volkswagen/Golf Mk6/Maintenance / Tools Shop By Car/Skoda/Octavia Mk3 (5E)/Maintenance / Tools Shop By Car/Skoda/Fabia Mk2 (5J)/Maintenance / Tools Shop By Car/Audi/S6 (C6) Shop By Car/Audi/A3 (8P 03-13)/Maintenance / Tools Shop By Car/Audi/A3 (8V 12-20)/Maintenance / Tools Shop By Car/Audi/S3 (8P)/Maintenance / Tools Shop By Car/Audi/TT Mk3 (8S)/Maintenance / Tools Shop By Car/Audi/S5 (B8)/Maintenance / Tools Shop By Car/Audi/TT RS (8J)/Maintenance / Tools Shop By Car/Skoda/Fabia Mk1 (6Y)/Maintenance / Tools Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Maintenance / Tools Shop By Car/Volkswagen/Beetle (16)/Maintenance / Tools Shop By Car/SEAT/CUPRA/Formentor Shop By Car/Audi/RS6 (C7)/Maintenance / Tools Code: 034-034-108-Z054
£72.58
POWERFLEX Powerflex ANTI-ROLL BAR LATERAL SUPPORT CLAMPS - 13-33mm
PFC13-14 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 13-14mm --- PFC15-16 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 15-16mm --- PFC17-18 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 17-18mm --- PFC19-20 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 19-20mm --- PFC21-22 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 21-22mm --- PFC23-24 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 23-24mm --- PFC25-27 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 25-27mm --- PFC28-30 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 28-30mm --- PFC31-33 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 31-33mm
£48.54
Racingline High-Flow Replacement Filter - Audi RS6 / RS7 (C8) 4.0TFSI
Racingline Performance High-Flow Replacement Filter - Audi RS6 / RS7 (C8) 4.0TFSIThe RacingLine High-Flow Panel Air Filter for Audi RS6 & RS7 C8 4.0 TFSI replaces the restrictive factory paper filter element with a much higher flow, reusable triple-layer Trifoam filter. Put simply, it’s the best Panel Air Filter you can buy for the V8TT. By allowing your engine to breathe better and operate more efficiently, you'll improve the engine’s airflow, and power and fuel economy gains will follow.By removing the significant restrictions that the standard paper panel filter gives, our giant Panel Filter allows a small but worthwhile increase in airflow through to the turbos. It's the perfect complement to either a stock car, or to Stage 1 tuning Confirmed applications. VWR1160RS > Audi RS6 C8 2018+ > Audi RS6 Performance C8 2023+ > Audi RS7 C8 4K8 2018+ > Audi RS7 Performance C8 / 4K8 2023+
£167.99
Number Plate Frame - Audi Variants (Multiple Logo's)
3D / 4D Number Plate frames! These are an Acrylic frame that your number plate sits in to add a bit of style to your car! Made up of 3 pieces to give a full customised number plate holder! Backing Base Plate Frame Surround Coloured insert with or without logo! Price is for One Frame - if you would like front and rear, please order QTY x2 You choose the following 3 options: The colour of your Insert Which logo you want - If Any The colour of your logo! The frame of the plate is always provided in BLACK. The logo is cut out of the insert - then a second coloured logo of your choise is inserted into the gap to give it a fully smoth and professional finish! How it works? Simply insert your number plate inside the frame using either a gel or foam double sided tape - then attach the frame to your car. These are suitable for front and rear number plates. Due to the nature of acrylic, its difficult to drill without it cracking so the frame needs to be stuck to the vehicle. We do offer a full fitting kit as well which is smaller double sided acrylic rectangles that attach to the back side of the frame and again to the car. Fitment: Please be aware these require a FLAT SURFACE to be adhered to, For the rear which has the beveled recesses for the holes our fitting kit will allow fitment, however, due to their weight and inability to be drilled you will struggle to insert these plates over say a honeycomb or mesh grill. In these instances it may be worth just ordering for the rear! It is important you fully prepare the area before sticking these in place to prevent loss. If the plate falls off your vehicle and is damaged or lost sadly this is not covered under warranty. If you require any customisation please get in touch via Email or Whatsapp, If we can do this - we will. This may incur additional costs however!
£25.00
Enhanced Edition LED H1
Here we introduce to you our #Enhanced Edition H1 LED Upgrade. This product can NOT be used as a cornering light! Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. Unlike other suppliers, CEUK has developed an LED bulb which does not require the splicing of wires and difficult intricate clips to hold the lamp in place. This unit fits in its entirety as an OEM H1 Halogen bulb would. The LED's come as standard 6000K ice white, Its worth noting that due to the design of headlamps, different lamps and light units may give different results to those found in our pictures. Good to know. High Lumen Output Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 20,000 (10,000 Per Bulb) What's in the box 2x H1 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£33.00
Enhanced Edition LED H8/11 Fog Unit V3
Description Introducing the Enhanced Edition LED H8/11 Fog Bulb V3 This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped beam upgrade Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Will fit in any vehicle which takes a H8 or H11 fitting provided you have about 1 inch of space behind the bulb! Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H8/11 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£54.00£45.00
Enhanced Edition LED H7 - Version 3
Description Here we introduce to you our #Enhanced Edition H7 LED V3 Upgrade. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Its worth noting that due to the design of the bulb, The driver / Heat fade is built into the back of the bulb and may not fit into all headlamp types. If you have any concerns please contact us at support@ceuk.org Please note - Some vehicles may require an LED clip of some sort to fit this item, message us direct if you want to clarify if your vehicle requires these. Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H7 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints LED clip not included - If required Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£45.00 - £72.50
IllumiNite H11 Fog / Cornering Bulbs
Part of our IllumiNite range - an ultra bright white halogen replacement for your fog and cornering bulbs. 35W - 6500K Ice White Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering.
£15.60£13.00
Universal Engine Bay Dress Up Kit (M6 Fitment)
Here we have our Bespoke dress up kits, One of the things that we are most famous for! Why do people spend thousands on making their engine bay look magical, but not replace the grubby rusty screws that come with your car from factory? That is a question we frequently ask, and we have the solution! We supply Anodized washers, complete with a stainless steel screw, to replace your existing ones and make your car really "Pop". The benefits are, Basically:- Your screws will never rust- You can select any colour you want!- It looks the bomb! This kit is for a Universal set of screws and washers in M6 fitment PLEASE ENSURE YOUR SCREWS ARE M6 BEFORE ORDERING! Contents: 10x Washer - 10x Stainless Steel Screw (M6)Locations: Headlights, Headlight Cover, Slam Panel etc You've seen these on eBay for £7, So why buy from us you ask...Well, The ones on eBay come with Cheaply made screws and washers, Our washers are made from a premium grade aluminium and anodized to last, and all our bolts are made from stainless steel!Our products are specific to your motor, And our replacement screws are direct stainless steel replicas of the factory screw. Meaning when they arrive, you fit them! No messing about, and no disappointment. Ad-Hoc screws and washers can be ordered, Please contact us for details!
£13.00
Racingline RacingLine High-Output Ignition Coil Pack - MQB Style (Sold Individually)
Higher Output Ignition Coils.for all VW Group 2.0 TSI engines and bigger. RacingLine's Higher Output Ignition Coils deliver greater energy output, ensuring a stronger and more consistent spark. A simple plug-and-play upgrade over the OE factory coils. What dothey do? The RacingLine Higher Output Ignition Coils are a direct plug-and-play upgrade from your OE ignition coils. Whether your engine is standard or Stage 3 tuned, it will immediately benefit from the greater energy output and stronger, more consistent spark generated by a set of RacingLine Coil Packs. The RacingLine Higher Output Ignition Coils deliver a 10% increase in output energy versus OE. This greater output is perfect for drivers looking to maximise output from either their stock or modified car Why have we settled on a 10% gain in output energy for our Coil Packs? Because this is the optimum increase level for VWG's TSI engines. Beyond this, no additional benefit is gained, yet the coil's internal temperatures begin to rise sharply. So, at this level, our Coil Packs can maintain coil voltage under load with little or no drop-off, performing consistently from idle through to the shift point or red-line Replacement is all the more worthwhile on older engines still running the OE Coil Packs. A new set makes a great preventative maintenance upgrade to avoid the risk of misfires caused as the OE Coil Packs age and gradually break down. Fitment couldn't be easier. These are a simple plug and play replacement. Remove the OE Coil Packs, replace with our Higher Output versions. Three Colour choices: 'R' BLUE VWR900000 GTI RED VWR900001 NARDO GREY VWR900002 Sold individually - remember to order sets of four, five, six or eight as required. Confirmed applications VWR900000 – BLUE I VWR900001 – RED I VWR900002 – GREY All vehicles fitted with the following engines: 1.8 TSI : EA888.3 2.0 TSI : EA888.3 & 3B 2.0 TSI : EA888.4 2.5 TFSI : EA855 EVO 3.0 V6 TFSI : EA839 2.9 V6 TFSI : EA839 4.0 V8 TFSI : EA825 Sold individually. Most popular models with these engines include: > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > VW Polo 5 GTI 1.8 TSI 6C 2015-2018 > VW Polo 6 AW 2017+ > Audi S1 2.0 TFSI 2015-2018 > Audi A1 GB 2019+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Audi SQ5 2017+ > Audi A4 / S4 / RS4 B9 2015+ > Audi A5 / S5 / RS5 F5 B9 2015+ > Audi A6 / S6 / RS6 C8 2018+ > Audi A6 / S6 / RS6 C7 4G 2011-2018 > Audi A7 / S7 / RS7 C8 4K8 2018+ > Audi A7 / S7 / RS7 C7 4G 2011-2018 > Audi A8 / S8 D5 2017+ > Audi A8 / S8 D4 2010-2017 > Audi Q8 4M8 50 TDI & 45 TDI 2018+ > Audi Q8 / SQ8 / RSQ8 4M8 2018+ > Audi Q7 / SQ7 4M 2016-2019 > Audi R8 2015+ > SEAT Ibiza Cupra 1.8TSI 6J 2017-2018 > SEAT Ibiza 6F 2017+ > Cupra Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > Cupra Formentor 2020+ > Cupra Ateca 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+ > Skoda Kodiaq 2018+ > Porsche Panamera 970 2010-2017 > Porsche Macan 2014+ > Porsche Cayenne 2019+ > Lamborghini Urus 2018-2021 > Bentley Bentayga 2016-2021
£41.99
Enhanced Edition LED H7 - Version 2
Description Here we introduce to you our #Enhanced Edition H7 LED V2 Upgrade. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, Its worth noting that due to the design of the bulb, The driver / Heat fade is built into the back of the bulb and may not fit into all headlamp types. If you have any concerns please contact us at support@ceuk.org Please note - Some vehicles may require an LED clip of some sort to fit this item, message us direct if you want to clarify if your vehicle requires these. These are sold separately. Good to know. High Lumen Output Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 20,000 (10,000 Per Bulb) What's in the box 2x H7 LED Units (6000k Default) LED clip not included - If required Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£53.99£44.99
MK7 Fiesta Number plate Option
This product is for Full Kits with a MK7 Number Plate product option, where the customer can choose this item as part of their kit!
£7.50 - £17.00
Trim Removal Tool - 3 Piece Kit
3 Piece trim removal tool kit. Ideal for those little jobs, We use these for installing sequential indicators and fog light guards as they work great at removing mirror caps and fog surrounds All 3 tools are the same size with 1 narrow end.
£1.80£1.50
Replacement H7 HID Bulb
Price is for 1 single bulb H7 Replacement HID Bulb for almost any HID Kit, including our Enhanced & Ultimate Kits Perfect replacement for a bulb that has given up the ghost or just doesn't seem as bright any more! Available in 5000k or 6000k - Price is for 1 Single Bulb Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Depending on batch, live cable may be red or blue, so please don’t be concerned if the picture shows a blue cable and yours is red - the product is the same. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering.
£18.01£15.00
Racingline RacingLine Replacement Rotors Only - STAGE 2 AND STAGE 3 BIG BRAKE KITS
Racingline Replacement 352mm Rotors - STAGE 3 - VWR680000These replacement Rotors come without bells ready to build onto the original bells of your 2013-2016 Volkswagen Racing 6-Pot Brake kit.Please note: They are not compatible with the Other generations of Racingline Big Brake Kit. Racingline Replacement 360mm Rotors - STAGE 3 - VWR680001 These replacement Rotors come without bells ready to build onto the original bells of your 2016-2018 Racingline 6-Pot Brake kit.Please note: They are not compatible with the Other generations of Racingline Big Brake Kit. Racingline 345mm Replacement Rotors (Complete) - STAGE 2 - VWR680002These replacement rotors are suitable for the Racingline 'Stage 2' Brake Kit for the PQ35 Platform and MQB Platform ModelsSold as a Pair of Rotors.- The discs have a new thickness of 30mm- The min thickness is 28mm- The max wear thickness is 1.4mm per side Racingline Replacement 355mm Rotors - STAGE 3 - VWR680003These replacement Rotors come without bells ready to build onto the original bells of your Current Generation 355mm Racingline Stage 3 Big Brake Kit.- The discs have a new thickness of 32mm- The min thickness is 30mm- The max wear thickness is 1.4mm per sidePlease note: They are not compatible with the Older generations of Racingline Big Brake Kit. Racingline Replacement 380mm Rotors - STAGE 3 - VWR680004These replacement Rotors come without bells ready to build onto the original bells of your Current Generation 380mm Racingline Stage 3 Big Brake Kit.- The discs have a new thickness of 32mm- The min thickness is 30mm- The max wear thickness is 1.4mm per sidePlease note: They are not compatible with the Older generations of Racingline Big Brake Kit.
£491.40 - £655.20