Performance - Audi S4 B8 (2007-2015)

Custom Car Number Plate Keyring – Personalised Reg Plate Keyring for Car Enthusiasts Add a personal touch to your keys with our Custom Number Plate Keyring, designed to replicate your actual car registration plate. Whether you're a proud car owner, collector, or just love a bit of custom flair, this keyring is the perfect accessory to show off your pride and joy. ✅ Customisable with your exact number plate✅ Durable Dual Layer 6mm acrylic construction✅ Colour Customisable for maximum visibility✅ Ideal gift for car lovers, new drivers or clubs✅ Lightweight yet strong – built to last Why choose our number plate keyring? Each keyring is made to order using high-quality materials that ensure long-lasting colour and detail. It’s lightweight enough for everyday use, yet tough enough to handle daily wear and tear. The miniature plate design mirrors UK registration plates, giving it a premium and authentic look. Choose whatever colour Face plate and back plate you want to give you a truly customised look. Perfect for: Personal use Gifts for new car owners Car club merchandise Show & shine accessories  

Read more less

Higher Output Ignition Coils.for all Volkswagen I Audi I Skoda I Seat with:2.0 TFSI EA113  /  2.0 TSI EA888 gen.12.5 TFSI (pre-2017)  /  3.0 TFSI V6 SC4.2 V8 FSI  /  5.2 V8 FSI For the older-gen TFSI, TSI and FSI engines, RacingLine's Higher Output Ignition Coils deliver greater energy output, ensuring a stronger and more consistent spark. A simple plug-and-play upgrade over the OE factory coils.VWR900003 (individual coil pack) What do they do?The RacingLine Higher Output Ignition Coils are a direct plug-and-play upgrade from your OE ignition coils. Whether your engine is standard or Stage 3 tuned, it will immediately benefit from the greater energy output and stronger, more consistent spark generated by a set of RacingLine Coil Packs. The RacingLine Higher Output Ignition Coils deliver a 10% increase in output energy versus OE. This greater output is perfect for drivers looking to maximise output from either their stock or modified car.  Why have we settled on a 10% gain in output energy for our Coil Packs? Because this is the optimum increase level for VWG's TFSI/TSI/FSI engines. Beyond this, no additional benefit is gained, yet the coil's internal temperatures begin to rise sharply. So, at this level, our Coil Packs can maintain coil voltage under load with little or no drop-off, performing consistently from idle through to the shift point or red-line. Replacement is all the more worthwhile on older engines still running the OE Coil Packs. A new set makes a great preventative maintenance upgrade to avoid the risk of misfires caused as the OE Coil Packs age and gradually break down. Fitment couldn't be easier. These are a simple plug and play replacement. Remove the OE Coil Packs, replace with our Higher Output versions. Confirmed applications VWR900003 – RED   All vehicles fitted with the following engines: 1.8 TSI EA888 Gen 1 2.0 TFSI EA113 2.0 TSI EA888 Gen 1 2.5 TFSI pre-2017 3.0 V6 TFSI Supercharged 4.2 V8 FSI 5.2 V8 FSI   Sold individually.  Most popular models with these engines include: > VW Golf 5 2005-2008 > VW Golf 5 GTI 2005-2008 > VW Golf 6 2008-2014 > VW Golf 6 GTI 2009-2014 > VW Golf 6 R 2009-2014 > VW Scirocco 2008-2017 > VW Jetta / GLI 5 2005-2011 > VW Polo 5 6C/6R 2008-2018 > VW Touran 2018+ > Audi S3 8P 2006-2012 > Audi RS3 8P 2011-2012 > Audi A3 8P 2003-2012 > Audi TT II 8J 2006-2014 > Audi TTRS II 8J 2009-2014 > Audi A4 / S4 / RS4 B8 2007–2015 > Audi A6 / S6 / RS6 C7 4G 2011-2018 > Audi A7 / S7 / RS7 C7 4G 2011-2018 > Audi A8 / S8 D4 2010-2017 > Audi Q7 4L 2009-2015 > Audi R8 (first gen 4S) 2006-2013 > Audi R8 (gen2 4S) 2015+ > SEAT Ibiza 6F 2017+ > SEAT Leon II 1P 2005-2012 > Skoda Octavia II 1Z 2004-2013   What do Coil Packs do?A Coil Pack's function is to transform the car battery’s 12-volt output to a much higher voltage. This intensified electrical energy provides a more reliable source for your spark plug to function from, improving engine performance by igniting the fuel and air mixture more efficiently. We've spend a lot of our development time optimising the Coil Pack's energy levels to ensure operating temperatures are controlled. Over the lifecycle of our Coil Pack, this thermal management will help to prevent future break down.  Coil Packs that generate higher than 10% over OE will overheat and deteriorate over time. We've increased energy output gain to a level that will keep coils as cool as possible for as long as possible. This level of increase represents the 'sweet spot' of the diminishing returns of how much additional energy can benefit the spark strength versus the rapid increase in  internal temperatures for long term reliability and performance. Replaces OE part numbers:06D90511506D905115A06D905115C06D905115D06D905115F06D905115G06D905115K06E905115A06E905115B06E905115C06E905115D06E905115E06E905115F06E905115G06F905115C06F905115E06F905115F06H905115B07K905715D07K905715E07K905715F07K905715G

Read more less

Original centre silencer delete with x-pipe INFO: Fitment Years: 2009 - 2017 Model: S4 3.0 TFSI V6 Quattro & Avant B8/B8.5 09-16 / S5 3.0 TFSI V6 Quattro 8T Coupe 12-17 Fits To: OEM / Scorpion Pipe Diameter: 63.5mm/2.5"   Scorpion Exhausts - Hand Crafted Performance Car Exhausts Scorpion exhausts look the way they do in order to perform the way they must. Thankfully that no-compromise performance driven approach means stunning welding and forming craftsmanship, the finest grade materials, and beautiful designs. Turn the key and you get even more. Not just that unmistakable Scorpion soundtrack, but something else; something no other exhaust brand can give you. Red Power - the way a Scorpion exhaust feels, and makes you feel. The sum of a rich heritage of racing, development and innovation gives you a system sure to turn heads, but also one which feels amazing! If you are upgrading your exhaust, insist on the enthusiasts’ brand. Proven to perform at the very highest level. Built to stir your soul. TAKING ACOUSTICS TO THE NEXT LEVEL As with all Scorpion’s high performance products interchange ability with O.E systems are a priority, which is why Scorpion have developed solutions for both the earlier generation of vacuum exhaust valves as well as the latest generation. Scorpion Stainless Steel Performance Exhausts Life Time Guarantee For The First Purchase (Excluding Cats & Flexes) High Quality Type-304 Aircraft Grade Stainless Steel Over 25 Years of Continuous Exhaust Development and Technical Expertise Hand Crafted Performance Exhausts Designed & Made in The UK Substantial Weight Saving Over Original Equipment Exhaust Systems -----------------------------------------  

Read more less

Original centre silencer delete with x-pipe INFO: Fitment Years: 2009 - 2017 Model: S4 3.0 TFSI V6 Quattro & Avant B8/B8.5 09-16 / S5 3.0 TFSI V6 Quattro Sportback 8T 10-17 Fits To: OEM / Scorpion Pipe Diameter: 63.5mm/2.5"   Scorpion Exhausts - Hand Crafted Performance Car Exhausts Scorpion exhausts look the way they do in order to perform the way they must. Thankfully that no-compromise performance driven approach means stunning welding and forming craftsmanship, the finest grade materials, and beautiful designs. Turn the key and you get even more. Not just that unmistakable Scorpion soundtrack, but something else; something no other exhaust brand can give you. Red Power - the way a Scorpion exhaust feels, and makes you feel. The sum of a rich heritage of racing, development and innovation gives you a system sure to turn heads, but also one which feels amazing! If you are upgrading your exhaust, insist on the enthusiasts’ brand. Proven to perform at the very highest level. Built to stir your soul. TAKING ACOUSTICS TO THE NEXT LEVEL As with all Scorpion’s high performance products interchange ability with O.E systems are a priority, which is why Scorpion have developed solutions for both the earlier generation of vacuum exhaust valves as well as the latest generation. Scorpion Stainless Steel Performance Exhausts Life Time Guarantee For The First Purchase (Excluding Cats & Flexes) High Quality Type-304 Aircraft Grade Stainless Steel Over 25 Years of Continuous Exhaust Development and Technical Expertise Hand Crafted Performance Exhausts Designed & Made in The UK Substantial Weight Saving Over Original Equipment Exhaust Systems -----------------------------------------  

Read more less

 This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. Downpipes with Sports Cats in Front Pipes or DECAT Downpipe INFO: Fitment Years: 2009 - 2017 Model: S4 3.0 TFSI V6 Quattro & Avant B8/B8.5 09-16 / S5 3.0 TFSI V6 Quattro 8T Coupe 12-17 Fits To: OEM / Scorpion Pipe Diameter: 63.5mm/2.5" Notes: Engine management light may be activated, Stage 2 ECU remap recommended Scorpion Exhausts - Hand Crafted Performance Car Exhausts Scorpion exhausts look the way they do in order to perform the way they must. Thankfully that no-compromise performance driven approach means stunning welding and forming craftsmanship, the finest grade materials, and beautiful designs. Turn the key and you get even more. Not just that unmistakable Scorpion soundtrack, but something else; something no other exhaust brand can give you. Red Power - the way a Scorpion exhaust feels, and makes you feel. The sum of a rich heritage of racing, development and innovation gives you a system sure to turn heads, but also one which feels amazing! If you are upgrading your exhaust, insist on the enthusiasts’ brand. Proven to perform at the very highest level. Built to stir your soul. TAKING ACOUSTICS TO THE NEXT LEVEL As with all Scorpion’s high performance products interchange ability with O.E systems are a priority, which is why Scorpion have developed solutions for both the earlier generation of vacuum exhaust valves as well as the latest generation. Scorpion Stainless Steel Performance Exhausts Life Time Guarantee For The First Purchase (Excluding Cats & Flexes) High Quality Type-304 Aircraft Grade Stainless Steel Over 25 Years of Continuous Exhaust Development and Technical Expertise Hand Crafted Performance Exhausts Designed & Made in The UK Substantial Weight Saving Over Original Equipment Exhaust Systems -----------------------------------------  

Read more less

  Fitment Audi    A6 (C7)   A6 (C6)   Q7 (4L 05-15)   Q5 (B8)   A8   S4 (B8)   S5 (B8) Volkswagen    Touareg (Mk3 20-) From the factory, Audi's 3.0T engine is equipped with a plastic thermostat housing. While sufficient when new, its plastic construction is prone to degradation over time. After enduring thousands of heat cycles and consistent exposure to chemical-rich antifreeze, the housing becomes brittle and begins to crack. Once the material is compromised, it can lead to a significant coolant leak, which, if left unchecked, may result in overheating and severe engine damage. This is especially problematic for the supercharged 3.0T, where maintaining proper engine temperature is critical for both performance and longevity. Our engineers set out to fix this issue with the ECS Billet Aluminum Thermostat Upgrade, engineered for enhanced durability, efficiency, and reliability. This precision-machined 6061 T6 billet aluminum thermostat replaces the failure-prone factory plastic housing, addressing one of the most common failure modes for all 3.0T supercharged engines. Designed with both performance and longevity in mind, this thermostat is the ultimate solution to overheating and coolant leaks, offering peace of mind in everyday driving and high-performance applications. The ECS Billet Aluminum Thermostat is the perfect choice for Audi 3.0T owners looking to enhance cooling system durability and reliability while eliminating the weaknesses of the OEM design. Take control of your engine’s performance and longevity today! PERFORMANCE FEATURES Our 6061-T6 billet aluminum housing is engineered for superior strength and reliability, offering exceptional resistance to cracking and warping. A striking red anodized finish provides corrosion resistance while adding a sleek aesthetic to your engine bay. The billet aluminum thermostat fin assembly features DLC (diamond-like coating) to reduce friction in thermostat operation, ensuring smooth and reliable performance. The internal return spring features a durable Zinc coating for exceptional longevity and corrosion resistance.  Our proprietary scraper seal is constructed from high-quality Viton rubber, providing a secure, leak-free seal for optimal cooling system performance. The ECS Billet Aluminum Thermostat Upgrade comes with an 80°C thermostat pre-installed for ease of assembly. BENEFITS Fixes Common Failure Modes: Eliminates the risk of cracking, leaking, and other issues associated with the OE plastic thermostat housing. Enhanced Cooling Performance: Maintains stable engine temperatures, even under demanding street or track conditions. Dual-Purpose Design: Built for high-performance enthusiasts while offering reliability for daily drivers. PRODUCT DEVELOPMENT Our ECS 3.0T Billet Aluminum Thermostat Upgrade was designed, engineered, tested, and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:70mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:76mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:83mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:90mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This filter is designed to be fitted to the outside of a rigid pipe such as a MAF sensor housing. These filters have an rubber polymer neck and a cone shaped filter element. This enables easy fitting to space-restricted engine compartments, whilst providing a large surface to maximise potential air flow. The filters are constructed using stainless steel cage internal and our famous 15mm thick twin layer foam.  Ramair universal filters are designed and manufactured for a very diverse range of applications and are made here in the UK. They are available in many different sizes and styles available.  Clean using our filter maintenance kit - CK-003 This product has the following dimensions: Filter Internal Neck Diameter: You choose Filter Neck Length: 23mm Filter Overall Height: 130mm Filter Base Width: 150mm Filter Top Width: 93mm Filter Material: 15mm Dual Layer Foam

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This filter is designed to be inserted into a flexible hose such as a rubber or silicone intake pipe. These filters have an aluminium ram-pipe neck and a cone shaped filter element. This integral cone channels all the incoming air, towards the inlet manifold, and in doing so, reduces unnecessary turbulence. These filters are also cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of pleated surface area an added boost of power to your engine too! These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of motorsport filtration the pleated range by Ramair is the premium choice on the market today for your fast road or track car. With its large size, technologically advanced filter and bell mouth alloy spun base this filter kit is capable of handling extremely large power & flow rates. Filter Outer Neck Diameter: Select Your Option Filter Neck Length: 45mm (1.8inch) Filter Overall Length: 185mm (7.3inch) Filter Base Width: 150mm (5.9inch) Filter Top Width: 120mm (4.7inch) Filter Material: Pleated Nanofibre Filter Base Material: Aluminium Filter Base Finish: Black Powder Coat

Read more less

Rear Valance Audi A4 S-Line Sedan B8 (Version with single exhaust tips on both sides) FITS ONLY:Audi A4 S-Line Sedan B8 2008 - 2011 COMPLETE SET CONTAINS: -> Rear DiffuserCOLOUR:-> Gloss Black This product requires the removal of the original diffuser, self-tapping screws are needed to secure fitment of the new diffuser. CHARACTERISTICS: Adds aesthetic value. Lightweight and offers some flexibility. This product is made from ABS plastic. The same material is used widely in the automotive industry. MORE INFORMATION: No additional work is required to finish the product. The product will arrive with a protective film.  Removal of the protective film will void any returns, only remove once you are certain the product will fit. We cannot be held responsible for the incorrect installation or use of this product. Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.  We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual. This product has been TUV MATERIALGUTACHTEN certified. The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

Read more less

  Rear Valance Audi A4 S-Line Sedan B8 (Version with dual exhaust tips on one side) FITS ONLY:Audi A4 S-Line Sedan B8 2008 - 2011 COMPLETE SET CONTAINS: -> Rear DiffuserCOLOUR:-> Gloss Black This product requires the removal of the original diffuser, self-tapping screws are needed to secure fitment of the new diffuser. CHARACTERISTICS: Adds aesthetic value. Lightweight and offers some flexibility. This product is made from ABS plastic. The same material is used widely in the automotive industry. MORE INFORMATION: No additional work is required to finish the product. The product will arrive with a protective film.  Removal of the protective film will void any returns, only remove once you are certain the product will fit. We cannot be held responsible for the incorrect installation or use of this product. Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.  We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual. This product has been TUV MATERIALGUTACHTEN certified. The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

Read more less

APR Ignition Coils are designed to be a direct plug-and-play upgrade to factory coils, and provide greater energy output, ensuring a stronger and more consistent spark. The commonplace replacement of factory ignition coils with those taken from the higher output Audi R8 is popularly believed to provide greater energy output. However, testing proves that they are no more powerful than the factory coils that are found on other engines. APR Ignition Coils increase energy output by up to 10% over stock. They are a direct upgrade or replacement, and come with a unique red housing! Features: Up to 10% more energy output than stock Red housing with APR Logo True upgrade, not just aesthetic Direct plug-and-play Suitable for the following engines: - 1.8T EA888 Gen 1 (Requires 4x)- 2.0T EA113 (Requires 4x)- 2.0T EA888 Gen 1 (Requires 4x)- 2.5 TFSI  Pre 2017 (Requires 5x)- 3.0 V6 Supercharged (Requires 6x)- 4.2 V8 FSI RS4 / RS5 etc. (Requires 8x)These are sold indivually, so you will need to add the number required. If you are unsure which engine you have, please contact our team before purchasing. fits: Shop By Car/Audi/RS4 (B8) Shop By Car/Audi/Q3 (Mk1 11-18) Shop By Car/Audi/A6 (C7) Shop By Car/Audi/A6 (C6) Shop By Car/Skoda/Yeti Shop By Car/SEAT/CUPRA/Toledo Mk3 (5P) Shop By Car/SEAT/CUPRA/Leon Mk2 (1P) Shop By Car/Audi/TT Mk2 (8J) Shop By Car/Audi/RS5 (B8) Shop By Car/Audi/RS4 (B7) Shop By Car/Audi/RS3 (8P) Shop By Car/Audi/A7 (4G8 10-17) Shop By Car/Audi/A5 (B8) Shop By Car/Audi/A4 (B8) Shop By Car/Audi/A4 (B7) Shop By Car/Volkswagen/Tiguan (Mk1) Shop By Car/Volkswagen/Passat CC Shop By Car/Volkswagen/Passat B6 Shop By Car/Volkswagen/EOS Shop By Car/Volkswagen/Scirocco Shop By Car/Volkswagen/Golf Mk5 Shop By Car/Volkswagen/Golf Mk6 Shop By Car/Audi/RS3 (8V) Shop By Car/Skoda/Superb (3T 08-15) Shop By Car/Audi/A3 (8P 03-13) Shop By Car/Audi/S3 (8P) Shop By Car/Audi/S4 (B8) Shop By Car/Audi/S5 (B8) Shop By Car/Audi/TT RS (8J) Shop By Car/Skoda/Octavia Mk2 (1Z)

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

  Rear Side Splitters V.2 Audi S4 Sedan B8 FITS ONLY:Audi S4 Sedan B8 (2008-2011)** Fits only with: AU-S4-B8-RS1GOO_OO ** COMPLETE SET CONTAINS:-> Rear Side Splitters (Left + Right)-> Fitting kit-> Fitting manualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.  

Read more less

Rear Valance Audi S4 Sedan B8 FITS ONLY:Audi S4 Sedan B8 (2008-2011) COMPLETE SET CONTAINS: -> Rear DiffuserCOLOUR:-> Gloss Black This product requires the removal of the original diffuser, self-tapping screws are needed to secure fitment of the new diffuser. Our full fitting manual can be found here: CHARACTERISTICS: Adds aesthetic value. Lightweight and offers some flexibility. This product is made from ABS plastic. The same material is used widely in the automotive industry. MORE INFORMATION: No additional work is required to finish the product. The product will arrive with a protective film.  Removal of the protective film will void any returns, only remove once you are certain the product will fit. We cannot be held responsible for the incorrect installation or use of this product. Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.  We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual. This product has been TUV MATERIALGUTACHTEN certified. The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

Custom 4D Number Plate Tags – Pair | Fully Legal | Any Colour & Logo Add a bold, custom touch to your UK number plates with our CEUK 4D Number Plate Tags – fully road legal and made to match or enhance your 4D plates. These are not just stickers – they’re premium, 3mm acrylic tags with a raised 4D effect, available in any colour and logo combination you choose. Designed to stick to the left side of your number plate using weatherproof backing tape, these tags offer a fully customisable and stylish upgrade that complies with UK number plate regulations. ✅ Key Features: Sold as a Pair – includes 2x matching tags 100% Road Legal – 50mm wide to comply with DVLA size regulations Fully Customisable:• Choose tag colour• Choose logo/emblem• Choose logo orientation• Choose logo colour Weatherproof & Durable – designed to last in UK conditions Easy Fit – pre-applied adhesive for quick install 🛠️ Size Options: Option 1 – Standard Plates (No Frame): • H 110mm x W 50mm x T 3mm• Designed to fully cover the corner of any number plate without a frame Option 2 – Plates with Surround Frame: • H 100mm x W 47mm x T 3mm• Slightly smaller to fit inside plate frames (may leave a small border) 💡 Note: Fit may vary slightly due to universal design. See product images for visual examples. Looking for something completely custom? Contact us at support@ceuk.org and our in-house design team will be happy to help you create a truly unique tag!

Read more less

Custom 4D Number Plate Tags – Fully Legal Acrylic Pair | Multiple Colours & Logos Take your number plate styling to the next level with CEUK’s Custom 4D Number Plate Tags – designed to perfectly complement 4D number plates, but also compatible with any standard UK number plate. Crafted from 3mm premium acrylic, these tags are 100% road legal at just 50mm wide, and adhere easily to the left-hand side of your plate using pre-applied, weatherproof adhesive backing. Sold as a pair (2 tags), each set is fully customisable to match your build’s style. 🎨 Customisation Options: Choose your tag colour Choose your logo or emblem Choose the logo orientation Choose the logo colour 📏 Size Options: Option 1 – For Plates Without Frames: • H 110mm x W 50mm x T 3mm• Designed to fully cover the plate’s left edge — ideal for plates fitted directly to the car. Option 2 – For Plates With Surround/Holder: • H 100mm x W 47mm x T 3mm• Slightly smaller to fit cleanly within most number plate holders (see sizing disclaimer below). ✅ Key Features: Sold as a pair (2 tags included) Legal under UK number plate regulations Premium laser-cut acrylic (3mm thick) Weatherproof adhesive – pre-applied for easy install Designed and made in the UK by CEUK Perfect for adding personal or branded touches to your plate setup ⚠️ Disclaimer: Full-size tag (Option 1) is universal and may slightly overlap corners depending on plate shape — designed to fully cover edge areas. Smaller tag (Option 2) may leave a 1–2mm border between the tag and frame depending on your holder’s dimensions. 📩 Want Something Completely Custom? No problem — just email support@ceuk.org, and our design team will help bring your idea to life.

Read more less

Enhanced Edition H7 Mini LED Bulbs – Ultra Compact, 6000Lm Output (6000K Ice White) All the power of our popular V3 LED Bulb – in a compact, low-profile design.Introducing the Enhanced Edition H7 Mini, designed to deliver exceptional brightness and clarity while eliminating the bulk of traditional LED upgrades. This is the perfect solution for tight-fit housings or vehicles with limited rear clearance. Ideal for dipped beam, high beam, or fog light applications, the H7 Mini fits any vehicle using a standard H7 fitting – no adapters, clips, or caps required. 💡 Why Choose the H7 Mini? Massive 6000Lm per bulb output – crisp 6000K Ice White Micro-sized cooling fan built into the shaft – no bulky heat sink Zero polarity issues – 4-point design works in multiple orientations Plug & Play Installation – fits directly into H7 sockets with no mods Compatible with projector and reflector housings ⚙️ Technical Specs: Voltage: 12V Wattage: 28W LED Chip: 3570 Colour Temperature: 6000K (Ice White) Lumen Output: 6000Lm per bulb Fitment: H7 (replaces OEM halogen) 📦 What's in the Box: 2x H7 Mini Enhanced Edition LED Bulbs Default colour: 6000K Ice White Supplied with 12-month CEUK warranty (keep packaging if longer warranty is stated) ⚠️ Vehicle Fitment Note: While this bulb fits all standard H7 sockets, spec-level variants (e.g. Ford ST, VW GTI) may use different housings. Please confirm bulb type before ordering by checking your existing unit. Installing LEDs may trigger a dashboard bulb error on some vehicles. This is harmless and explained in our FAQs.

Read more less

Want to tighten your grip on the road? Scorpion’s lightweight aluminium chassis braces tick all the boxes. The single-piece manufacturing process ensures a high-strength connection under load. Braces are powder-coated black and etched with the Scorpion mark.Our underbody bracing reduces performance loss due to chassis twist during hard braking or cornering. Enhanced body rigidity translates to a more direct feel with the road surface. (Fits both the Scorpion and OEM pipework.) Please note, this product fits: S4 3.0 TSFI V6 Quattro & Avant B8/B8.5 S5 8T Coupe 12 - 17 S5 8T Sportback 10 - 17

Read more less

Enhanced Edition H8/H11 Mini LED Bulbs – Ultra Bright, Compact Fit (6000K Ice White, 6000Lm) All the power of our V3 LED bulb – in a sleek, compact design.Introducing the CEUK Enhanced Edition H8/H11 Mini LED Bulbs, engineered for maximum output and perfect fitment in tight headlight or fog light housings. These bulbs deliver a massive 6000Lm per bulb and feature a compact heat management system – ideal for modern vehicles where space is limited. Compatible with H8 and H11 fitments, these bulbs are perfect for fog lights, dipped beams, or high beam upgrades, delivering clear, crisp 6000K Ice White light with superior reliability. 💡 Key Features: 6000Lm Output Per Bulb – 6x brighter than most OEM halogens Ultra-Compact Design – mini cooling fan built into the shaft, no bulky heat sink Plug & Play Fitment – no adapters, clips, or caps needed 12V, 28W Power Efficiency Zero Polarity Issues – works in any orientation Suitable for Projector & Reflector Housings Safe for OEM Components – no CANBUS interference on most vehicles ⚙️ Technical Specs: Voltage: 12V Wattage: 28W LED Chip: 3570 Colour Temperature: 6000K Ice White Lumen Output: 6000Lm per bulb Fitment: H8 / H11 📦 What’s in the Box: 2x H8/H11 Enhanced Edition LED Bulbs (6000K Ice White) CEUK 12-Month Warranty (retain packaging if warranty is extended) ⚠️ Fitment Note: Always double-check your vehicle's bulb type – special editions (e.g., Ford ST, VW GTI) may differ from standard specs. Some vehicles may display a dashboard error message when LEDs are installed – this is harmless and addressed in our FAQs.

Read more less