15% OFF ALL ELIGIBLE ITEMS IN OUR EASTER SALE - USE DISCOUNT CODE "EASTER24" AT CHECKOUT. VALID UNTIL 23:59 1ST APRIL.

REVO AUDI RS6/RS7 4.0 TSFI | FILTER & HOSE UPGRADE

Description

Revo 4.0 TFSI Intake S6 S7

The Audi RS6 and RS7 are without doubt quick in their purest form, add Revo Stage 1 and 2 software however, they quickly become supercar killers. Giving the cars an even further boost in their already staggering power figures, we turned our attention to developing an upgrade for the air intake system. Testing found that the RS air-box had a tremendous amount of potential, with only a few key areas that caused restriction.

The new direct replacement kit includes a Revo foam filter, stepped silicone hoses and an aluminium tag. We installed the kit on an RS7 development vehicle, on our Dynopak hub dyno we saw improved power and torque throughout the rev-range, with consistent gains of +4WHP and +4NM over the stock filter and hoses when used with Revo Stage 1 ECU performance software. 

BENEFITS

  • Increased airflow
  • +4 WHP and + 4 NM gain
  • Retains factory airbox
  • Custom designed Silicone Hoses
  • Revo ProPanel filter

Revo 4.0 TFSI Intake RS6 RS7

AIR FILTER

The standard paper filter found in most vehicles performs well under normal conditions, however, with increased power it becomes a major choking point in the system. Revo ProPanel filters work by trapping dirt particles within each of the oiled foam layers while allowing air to negotiate its way through, reducing restriction and offering much longer service intervals. We tested the filter at a leading motor testing centre ‘Mira’ on an industry recognised dust load test. On a full dust load test, the foam filter was found to still be 99.3% efficient, filtering down to 5 microns while offering the least amount of restriction over similar products.

SILICONE HOSES

The plastic hoses on the stock system design with a corrugated style to flex with the engine movement, while this has its place it also causes a large amount of turbulence as the airflow doesn’t have a smooth direct path to the turbos. We designed the silicone hoses with stepped internals to ensure a flush fit and to minimise turbulence while still allowing for engine movement.

Revo 4.0 TFSI Intake S6 S7
 

 

INTAKE PERFORMANCE FIGURES


Engine Software Power Torque
4.0 TFSI Stage 1 + 4 BHP + 4 NM

 

*Maximum power and torque increases are shown in testing when using Revo 4.0 TFSI intake system compared to the stock intake on Audi RS7

 

TECHNICAL DOCUMENTS


The following documents are available to view:

...

FITTING INSTRUCTIONS

Download the  RA731M200200 Revo 4.0 TFSI Air Intake System Fitting Instructions

 

 

FITTING


    

Manufacturer Model Engine Year
Audi RS6 4.0 TFSI 2012 >
Audi RS7 4.0 TFSI 2012 >
Product form

SKU: RA731M200200

£214.80 Incl. VAT

Shipping Costs Calculated at checkout

?    Check if this item is in stock? Click Here
  • Price Match Guarantee
  • Speedy Shipping
  • Lowest Price Guarantee
International Customers please contact us for a shipping quote!

Description

Revo 4.0 TFSI Intake S6 S7

The Audi RS6 and RS7 are without doubt quick in their purest form, add Revo Stage 1 and 2 software however, they quickly become supercar killers. Giving the cars an even further boost in their already staggering power figures, we turned our attention to developing an upgrade for the air intake system. Testing found that the RS air-box had a tremendous amount of potential, with only a few key areas that caused restriction.

The new direct replacement kit includes a Revo foam filter, stepped silicone hoses and an aluminium tag. We installed the kit on an RS7 development vehicle, on our Dynopak hub dyno we saw improved power and torque throughout the rev-range, with consistent gains of +4WHP and +4NM over the stock filter and hoses when used with Revo Stage 1 ECU performance software. 

BENEFITS

  • Increased airflow
  • +4 WHP and + 4 NM gain
  • Retains factory airbox
  • Custom designed Silicone Hoses
  • Revo ProPanel filter

Revo 4.0 TFSI Intake RS6 RS7

AIR FILTER

The standard paper filter found in most vehicles performs well under normal conditions, however, with increased power it becomes a major choking point in the system. Revo ProPanel filters work by trapping dirt particles within each of the oiled foam layers while allowing air to negotiate its way through, reducing restriction and offering much longer service intervals. We tested the filter at a leading motor testing centre ‘Mira’ on an industry recognised dust load test. On a full dust load test, the foam filter was found to still be 99.3% efficient, filtering down to 5 microns while offering the least amount of restriction over similar products.

SILICONE HOSES

The plastic hoses on the stock system design with a corrugated style to flex with the engine movement, while this has its place it also causes a large amount of turbulence as the airflow doesn’t have a smooth direct path to the turbos. We designed the silicone hoses with stepped internals to ensure a flush fit and to minimise turbulence while still allowing for engine movement.

Revo 4.0 TFSI Intake S6 S7
 

 

INTAKE PERFORMANCE FIGURES


Engine Software Power Torque
4.0 TFSI Stage 1 + 4 BHP + 4 NM

 

*Maximum power and torque increases are shown in testing when using Revo 4.0 TFSI intake system compared to the stock intake on Audi RS7

 

TECHNICAL DOCUMENTS


The following documents are available to view:

...

FITTING INSTRUCTIONS

Download the  RA731M200200 Revo 4.0 TFSI Air Intake System Fitting Instructions

 

 

FITTING


    

Manufacturer Model Engine Year
Audi RS6 4.0 TFSI 2012 >
Audi RS7 4.0 TFSI 2012 >

Recently viewed products

Login

Forgot your password?

Don't have an account yet?
Create account