Performance - Audi TTS MK2 (8J) 2006-2014

P3 V3 OBD2 Gauge Basic Features Plug and Play Install - plugs directly into your OBD2 port (Want to keep your OBD2 port open? The P3 hard-wire harness kit also available) OEM Integration - installs in your vent for a sleek install while retaining air flow Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analogue boost sensor Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units) Boost (via OBD2 port using OEM sensors or P3 analogue boost sensor) Coolant temperature Air/Fuel ratio (AFR or Lambda) Vehicle speed (can be calibrated in 1% increments from -9% to +20%) Intake air temperature Throttle angle Ignition timing Engine RPM Exhaust gas temperature Battery voltage Programmable shift light analogue input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor analogue input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor Acceleration timers (0-60mph/0-100mph/60-130mph) Braking timers (60-0mph/100-0mph) Optional Add-Ons P3 analogue Boost sensor - plugs directly into gauge harness, no wiring required) Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port  

Read more less

Please note: spacers are sold as PAIRS! if you want to do front and rear than qty x2 is needed! Even better driving dynamics and more exciting looks: H&R TRAK+ wheel spacers make your car even sportier! By moving the wheel out from the hub, TRAK+ wheel spacers widen the stance of the vehicle and lower its roll center. This simple modification increases lateral stability, which in turn provides improved handling, greater safety and of course, the sleek style you’ve been looking for. Like all of H&R’s street-engineered products, H&R TRAK+ wheel spacers are certified by the German Technical Inspection Agency (TÜV). H&R also has the correct wheel bolts or nuts to install TRAK+ wheel spacers on most cars, with original or aftermarket wheels. 40mm overall Axle spacers High strength, light weight aluminum/magnesium alloy CNC machined Anodized for optimum corrosion protection Available for most domestic and imported automobiles For use with original or aftermarket wheels (Studs may need shortening if aperture in rear of alloy wheel is not sufficient for clearance) Compatible with all suspension designs TUV approved SPECIFICATIONS Track widening per axle [mm] 40 Thickness [mm] 20 Number of Holes 5.0 Bolt Hole Circle Ø [mm] 112 Centering Diameter [mm] 57.1 Colour Black Registration Type with TÜV® certificate   Please note, Due to the nature and complexity of a wheel spacer, customers MUST know that the size they are ordering is correct prior to ordering by measuring your stud length and wheel groove depth. Unfortunately, if over tightened the integrity of the spacer and / or bolts can be compromised - and due to this, any spacer that has been fitted, trial fitted or removed from its packaging can not be returned! Please be aware of this as by ordering you agree to this!

Read more less

This performance intake kit is designed to fit Volkswagen R32, Audi RS3 & TTRS models from 2011 to 2013. It is suitable for both right and left-hand-drive vehicles. Features Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions Easy to clean using our filter maintance kit - CK-003 What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include: Black powder coated heat shield Ramair foam filter Black silicone hose Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2008-2014 Audi TTS (8J) 2.0 TFSI 2005-2010 VW Passat (B6) 3.2 FSI 2005-2010 VW Passat (B6) 3.6 FSI 2006-2010 Audi TT (8J) 3.2 V6 Quattro 2005-2008 VW Golf R32 (MK5) 3.2 V6 2003-2009 Audi A3 (8P) 3.2 V6 Quattro 2007-2010 VW Passat R36 (B6) 3.6 2009-2015 Skoda Superb (MK2) 3.6 V6

Read more less

VWR 'Cup Edition' EVO 8.5 x 18" Alloy Wheels RacingLine's 'Cup Edition' EVO 8.5 x 18" alloy wheel has been developed for our track and race cars to give a track-orientated rim that's both ultra-strong yet light. Why choose 'Cup Edition' EVO? The VWR ‘Cup Edition’ EVO 18" Alloy Wheel has been a favourite for a decade for race and track cars to deliver an ultra-strong yet lightweight rim capable of repeatedly coping with the extreme demands that track driving brings. Developed direct from our racing programme, this exact family of VWR 'Cup Edition' EVO Alloy Wheels is based on the rims used in the Volkswagen Racing Cup and the British Touring Car Championship.  Now, our Cup Edition EVO wheel updates this classic design with lighter weight, a fresh new appearance and stunning detailing. The perfect track dimensions for MQB/MQBE of 8.5 x 18" diameter with an ET45 offset. Finished in a choice of stunning hard-wearing Satin Gunmetal Grey, Gloss Black, Matte Bronze or Motorsport White, all complete with RacingLine centre cap. Produced to the highest standards, developed and manufactured to exceed OEM standards. PERFECT FITMENT Fitment offset of ET45 for many VWG models on MQB, MQB EVO and A5 platforms with 5x112 PCD. LIGHT : STRONG Weighing 9.7kg / 21.3lbs per wheel, whilst crucially still retaining the strength needed for the demands of road or track. IDEAL FOR TRACK The choice of 18" rim is ideal for track use, allowing a higher, squarer tyre fitment without the risk of excessive rubbing. Precision engineered for Perfect Performance. Max. wheel load of 560kg tested to ISO 7141 for geometric accuracy, impact strength, structural fatigue and load rating requirements Knurled bead seats to prevent tyre slip/rotation Weight removed from the mounting face including drainage cutouts to ensure no trapped water or debris between wheel and hub face causing long term corrosion Choice of four durable finishes to look good, and stay looking good Confirmed applications. Fitment for all VWG models on MQB, MQB EVO and A5 platforms with 5x112 PCD: VWR610008 18 x 8.5 ET45 Gunmetal Grey   VWR610009 18 x 8.5 ET45 Motorsport White​ ​VWR610010 18 x 8.5 ET45 Gloss Black   VWR610011 18 x 8.5 ET45 Matte Bronze For motorsport use (eg. for vehicles with additional camber for arch clearance) we also offer an ET35 offset in Gunmetal Grey. VWR610100 18 x 8.5 ET35 Gunmetal Grey > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Golf 5 2005-2008 > VW Golf 6 2008-2014 > VW Scirocco 2008-2017 > VW Jetta / GLI 5 2005-2011 > VW Jetta / GLI 6 2011-2018 > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi SQ2 2018+ > Audi S3 8P 2006-2012 > Audi A3 8P 2003-2012 > Audi TT II 8J 2006-2014 > Cupra Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > SEAT Leon II 1P 2005-2012 > Cupra Formentor 2020+ > Cupra Ateca 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Octavia II 1Z 2004-2013   Strength matters. With a load rating of 560kg per wheel, these Cup Edition EVO wheels have the strength to cope with repeated, harsher track use.  It's essential for the rim to have this sort of strength engineered-in from the start. Just imagine the 'spike loads' running through a wheel hitting circuit kerbing (such as sausage kerbs) through a corner at speed. Obsessive weight saving. We've put a lot of development time into weight reduction, but without compromising strength. Incorporating cut-outs in the mounting face, material removal in the front and back of each spoke, even a groove running around the outer rim to save a few more grams. ​Knurled tyre bead seat. Another nice new feature incorporated into the design are knurled strips on the outer barrel of the wheel where the tyre bead seats.    A true motorsport feature that prevents unwanted tyre slip or rotation on the rim in extreme use. The result? 9.7kg / 21.3lbs per wheel, yet still retaining a load rating of 560kg.

Read more less

APR Ignition Coils are designed to be a direct plug-and-play upgrade to factory coils, and provide greater energy output, ensuring a stronger and more consistent spark. The commonplace replacement of factory ignition coils with those taken from the higher output Audi R8 is popularly believed to provide greater energy output. However, testing proves that they are no more powerful than the factory coils that are found on other engines. APR Ignition Coils increase energy output by up to 10% over stock. They are a direct upgrade or replacement, and come with a unique red housing! Features: Up to 10% more energy output than stock Red housing with APR Logo True upgrade, not just aesthetic Direct plug-and-play Suitable for the following engines: - 1.8T EA888 Gen 1 (Requires 4x)- 2.0T EA113 (Requires 4x)- 2.0T EA888 Gen 1 (Requires 4x)- 2.5 TFSI  Pre 2017 (Requires 5x)- 3.0 V6 Supercharged (Requires 6x)- 4.2 V8 FSI RS4 / RS5 etc. (Requires 8x)These are sold indivually, so you will need to add the number required. If you are unsure which engine you have, please contact our team before purchasing. fits: Shop By Car/Audi/RS4 (B8) Shop By Car/Audi/Q3 (Mk1 11-18) Shop By Car/Audi/A6 (C7) Shop By Car/Audi/A6 (C6) Shop By Car/Skoda/Yeti Shop By Car/SEAT/CUPRA/Toledo Mk3 (5P) Shop By Car/SEAT/CUPRA/Leon Mk2 (1P) Shop By Car/Audi/TT Mk2 (8J) Shop By Car/Audi/RS5 (B8) Shop By Car/Audi/RS4 (B7) Shop By Car/Audi/RS3 (8P) Shop By Car/Audi/A7 (4G8 10-17) Shop By Car/Audi/A5 (B8) Shop By Car/Audi/A4 (B8) Shop By Car/Audi/A4 (B7) Shop By Car/Volkswagen/Tiguan (Mk1) Shop By Car/Volkswagen/Passat CC Shop By Car/Volkswagen/Passat B6 Shop By Car/Volkswagen/EOS Shop By Car/Volkswagen/Scirocco Shop By Car/Volkswagen/Golf Mk5 Shop By Car/Volkswagen/Golf Mk6 Shop By Car/Audi/RS3 (8V) Shop By Car/Skoda/Superb (3T 08-15) Shop By Car/Audi/A3 (8P 03-13) Shop By Car/Audi/S3 (8P) Shop By Car/Audi/S4 (B8) Shop By Car/Audi/S5 (B8) Shop By Car/Audi/TT RS (8J) Shop By Car/Skoda/Octavia Mk2 (1Z)

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

Fits Coupe model only. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi TTS performance exhaust is made in 3"/76.2mm pipework and fits from the turbo backwards (Turbo back system) these exhausts replace the front pipe, standard catalyst, centre and rear sections. The resonated sports exhaust option includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version (excluding the centre silencer) which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sports catalyst version replaces a factory emissions device and is not EC homologated. This may not meet current emission laws for road use in your territory.  All relevant fittings and gaskets are supplied. (Except turbo gasket). The demo car used in the pictures is fitted with 3.5" (88.9mm) tailpipes (YTP9). Please note: Fits Coupe version only and will not fit the TTS Roadster. Press Release Cobra Sport has managed to achieve a power boosting system for the TTS which delivers impressive results in both bhp and torque, yet also combines with the marques core values of providing a classy, quietly sporty drive. The OE system was replaced with a 3"/76.2mm bore upgrade and with the top conversion, a complete turbo back system including a de-cat (re-map required), the power gains are substantial, providing an impressive 35% increase in BHP and torque results showing a 27.5% increase. Tailpipe finishes are available in a choice of traditional highly polished stainless steel or matt black in quad 3"/76.2mm or a more defined 3.5"/88.9mm, these tailpipes are a round design and shaped to fit nicely into the smooth lines of the TTS, subtly hinting at the performance upgrade underneath the car. Matt Thomas, Sales Manager at Cobra Sport offers his verdict on the TTS upgrade "The fantastic power gains achieved with this car are quite astonishing when you consider that only a fractional decibel level increase was recorded, this truly allows for customers to benefit immensely from a Cobra Sport system without it interfering with the day-to-day drivability of the car." As always Cobra Sport are willing to back up their promises on quality, with a lifetime guarantee for customers who purchase the exhaust upgrade. Usual refinements include, hand finishing using advanced TIG welding techniques and all Grade 304 stainless pipework being formed expertly on CNC Mandrel bending machines, which ensures the smoothest of gas flow, with precision jig manufacturing to ensure a perfect fit. Media Example of Audi TTS sports exhaust (turbo back system - de-cat & non resonated). Interior exhaust sound example of Audi TTS sports exhaust (turbo back system - de-cat & non-resonated). Interior exhaust sound example of Audi TTS sports exhaust (turbo back system - de-cat & non-resonated). British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.    

Read more less

Fits Coupe model only. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi TTS performance exhaust is made in 3"/76.2mm pipework and fits from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections. The resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version (excluding the centre silencer) which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. The demo car used in the pictures is fitted with 3.5" (88.9mm) tailpipes (YTP9). Please note: Fits Coupe version only and will not fit the TTS Roadster. Press Release Cobra Sport has managed to achieve a power boosting system for the TTS which delivers impressive results in both bhp and torque, yet also combines with the marques core values of providing a classy, quietly sporty drive. The OE system was replaced with a 3"/76.2mm bore upgrade and with the top conversion, a complete turbo back system including a de-cat (re-map required), the power gains are substantial, providing an impressive 35% increase in BHP and torque results showing a 27.5% increase. Tailpipe finishes are available in a choice of traditional highly polished stainless steel or matt black in quad 3"/76.2mm or a more defined 3.5"/88.9mm, these tailpipes are a round design and shaped to fit nicely into the smooth lines of the TTS, subtly hinting at the performance upgrade underneath the car. Matt Thomas, Sales Manager at Cobra Sport offers his verdict on the TTS upgrade "The fantastic power gains achieved with this car are quite astonishing when you consider that only a fractional decibel level increase was recorded, this truly allows for customers to benefit immensely from a Cobra Sport system without it interfering with the day-to-day drivability of the car." As always Cobra Sport are willing to back up their promises on quality, with a lifetime guarantee for customers who purchase the exhaust upgrade. Usual refinements include, hand finishing using advanced TIG welding techniques and all Grade 304 stainless pipework being formed expertly on CNC Mandrel bending machines, which ensures the smoothest of gas flow, with precision jig manufacturing to ensure a perfect fit. Media Example of Audi TTS sports exhaust (turbo back system - de-cat & non resonated). British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.    

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi TTS performance exhaust is made in 3"/76.2mm bore pipework and fits from the turbo to the standard centre section. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sports catalyst version replaces a factory emissions device and is not EC homologated. This may not meet current emission laws for road use in your territory.  All relevant fittings and gaskets are supplied. (Except turbo gasket). Please note the 'To Standard' fitment is designed to fit to O/E Cat Back exhaust only. Please note: This front pipe fits both the Audi TTS Coupe and TTS Roadster. Media British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.

Read more less

Front Splitter V.2 Audi TT S / TT S-Line 8J Facelift FITS ONLY:Audi TT S 8J (2006-2011)Audi TT S 8J Facelift (2011-2013)Audi TT S-Line 8J Facelift (2011-2013) COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.   Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.

Read more less

  Front Splitter V.3 Audi TT S / TT S-Line 8J Facelift FITS ONLY:Audi TT S 8J (2006-2011)Audi TT S 8J Facelift (2011-2013)Audi TT S-Line 8J Facelift (2011-2013) COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.

Read more less

Spoiler CAP V.2 Audi TT 8J FITS ONLY:Audi TT S 8J (2006-2011)Audi TT S 8J Facelift (2011-2013)Audi TT S-Line 8J Facelift (2011-2013) COMPLETE SET CONTAINS:-> Spoiler Extension + 3M Tape-> Degreasing Cloth-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.

Read more less

Street PRO Front Splitter Audi TT S / TT S-Line 8J Facelift FITS ONLY:Audi TT S 8J (2006-2011)Audi TT S 8J Facelift (2011-2013)Audi TT S-Line 8J Facelift (2011-2013) COMPLETE SET CONTAINS: §  Maxton Racing Front Splitter §  Mounting kit Maxton Racing properties include: §  A more durable material; 10 mm thick ABS plastic. §  Increased impact and scratch resistance. §  New designs, providing a new unique style. §  UV protective coating. §  Temperature/weather resistant. §  Products arrive with protective film vacuum sealed to it. §  No painting required. §  Multiple finish options: 10 mm thick matte black, 10 mm thick matte black with a red core. §  If you decide to paint the product, primer must be used first. § Parts are labelled confirming authenticity and quality of the product. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).   Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.  

Read more less

Street PRO Front Splitter + Flaps Audi TT S / TT S-Line 8J Facelift FITS ONLY:Audi TT S 8J (2006-2011)Audi TT S 8J Facelift (2011-2013)Audi TT S-Line 8J Facelift (2011-2013) COMPLETE SET CONTAINS: §  Maxton Racing Front Splitter §  Mounting kit Maxton Racing properties include: §  A more durable material; 10 mm thick ABS plastic. §  Increased impact and scratch resistance. §  New designs, providing a new unique style. §  UV protective coating. §  Temperature/weather resistant. §  Products arrive with protective film vacuum sealed to it. §  No painting required. §  Multiple finish options: 10 mm thick matte black, 10 mm thick matte black with a red core. §  If you decide to paint the product, primer must be used first. § Parts are labelled confirming authenticity and quality of the product. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).   Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.  

Read more less

Street PRO Side Skirts Diffusers Audi TT S / TT S-Line 8J Facelift FITS ONLY:Audi TT S 8J (2006-2011)Audi TT S 8J Facelift (2011-2013)Audi TT S-Line 8J Facelift (2011-2013) COMPLETE SET CONTAINS: §  Maxton Racing Side Skirt Diffusers §  Mounting kit Maxton Racing properties include: §  A more durable material; 10 mm thick ABS plastic. §  Increased impact and scratch resistance. §  New designs, providing a new unique style. §  UV protective coating. §  Temperature/weather resistant. §  Products arrive with protective film vacuum sealed to it. §  No painting required. §  Multiple finish options: 10 mm thick matte black, 10 mm thick matte black with a red core. §  If you decide to paint the product, primer must be used first. § Parts are labelled confirming authenticity and quality of the product. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).   Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.

Read more less

  Street PRO Side Skirts Diffusers + Flaps Audi TT S / TT S-Line 8J Facelift FITS ONLY:Audi TT S 8J (2006-2011)Audi TT S 8J Facelift (2011-2013)Audi TT S-Line 8J Facelift (2011-2013) COMPLETE SET CONTAINS: §  Maxton Racing Side Skirt Diffusers §  Mounting kit Maxton Racing properties include: §  A more durable material; 10 mm thick ABS plastic. §  Increased impact and scratch resistance. §  New designs, providing a new unique style. §  UV protective coating. §  Temperature/weather resistant. §  Products arrive with protective film vacuum sealed to it. §  No painting required. §  Multiple finish options: 10 mm thick matte black, 10 mm thick matte black with a red core. §  If you decide to paint the product, primer must be used first. § Parts are labelled confirming authenticity and quality of the product. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.

Read more less

Front Flaps Audi TT S / TT S-Line 8J Facelift FITS ONLY:Audi TT S 8J (2006-2011)Audi TT S 8J Facelift (2011-2013)Audi TT S-Line 8J Facelift (2011-2013)** Fits only with: AUTT2SLINECNC-FD1 ** COMPLETE SET CONTAINS: - Flaps - Fitting kit   Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.

Read more less

Side Flaps Audi TT S / TT S-Line 8J Facelift FITS ONLY:Audi TT S 8J (2006-2011)Audi TT S 8J Facelift (2011-2013)Audi TT S-Line 8J Facelift (2011-2013)** Fits only with: AUTT2SLINECNC-SD1 ** COMPLETE SET CONTAINS: - Flaps - Fitting kit   Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.

Read more less

supplied with replacement solenoid and has lower profile than T9351   The T9481 is a performance blow-off valve solution for the late-model VW, Audi, SEAT and Skoda vehicles. In summary, if you know your GFB valves, this is the same as the T9451 VTA but with an integrated solenoid valve for a lower stack height and greater engine bay clearance. If you want sound with your performance (or performance with your sound!), GFB’s T9481 VTA delivers! By combining atmosphere venting with the proven performance benefits of our ground-breaking DV+, the VTA delivers an aggressive blow-off sound, improved throttle response, as well as superior boost holding and reliability. With its low-profile integrated solenoid and compact design, installing the T9481 is a breeze. Just swap out your factory diverter valve with the VTA, and you’re good to go. Reliable Boost HoldingDespite some improvements in reliability by the latest generation of OEM diverter valves, the performance trade-offs remain. There is no escaping the fact that the moulded plastic valve mechanism of the OEM valve cannot reliably seal boost pressure. The VTA’s CNC-machined aluminium and brass valve components, combined with a Viton face seal ensure reliable boost holding even up to 50psi. Sharper Throttle Response, Faster Boost RecoveryOEM electronic diverter valves are binary in operation – they’re either open or shut. Your throttle, however, isn’t. When you make small throttle adjustments, the binary operation of the factory diverter results in abrupt changes in power delivery, which is the very definition of poor throttle response. GFB’s patented “pilot actuation” system allows the VTA’s piston to open and close progressively, thereby smoothing the power delivery during throttle modulation, and ultimately improving throttle response. Unrivalled longevity, backed by our Lifetime WarrantyThe combination of precision manufacturing, attention to detail, and robust materials means the VTA will last a lifetime. So does the warranty. Why choose a VTA over a "BOV spacer"?Whilst “BOV spacers” might offer a cheap way to get a blow-off sound, they fail to tackle the fundamental performance and reliability issues associated with the OEM diverter valve - all they do is redirect the vented air. The VTA offers more than just sound. By replacing the OEM diverter valve you also get enhanced performance and reliability. FITS: Make Model Mark Variant Audi A1 8X1 3-Door Hatchback S1 quattro Audi A3 MK2 8P1 3-Door Hatchback 1.8 TFSI Audi A3 MK2 8P1 3-Door Hatchback 2.0 TFSI quattro Audi A3 MK2 8P1 3-Door Hatchback S3 quattro Audi A3 MK2 8P7 Cabriolet 1.8 TFSI Audi A3 MK2 8P7 Cabriolet 2.0 TFSI Audi A3 MK2 8PA 5-Door Sportback 1.8 TFSI Audi A3 MK2 8PA 5-Door Sportback 2.0 TFSI Audi A3 MK2 8PA 5-Door Sportback 2.0 TFSI quattro Audi A3 MK2 8PA 5-Door Sportback RS3 quattro 2.5 TFSI Audi A3 MK2 8PA 5-Door Sportback S3 quattro Audi A3 MK3 8V1 3-Door Hatchback 1.8 TFSI Audi A3 MK3 8V1 3-Door Hatchback 1.8 TFSI quattro Audi A3 MK3 8VA 5-Door Sportback RS3 quattro Audi A3 MK3 8VS Saloon / Limousine 1.8 TFSI Audi A3 MK3 8VS Saloon / Limousine 1.8 TFSI quattro Audi A4 B6 & B7 Cabriolet 2.0 TFSI 16V Audi A4 B7 Avant 2.0 TFSI Audi A4 B7 Saloon / Limousine 2.0 TFSI Audi A4 B8 Avant 1.8 TFSI Audi A4 B8 Avant 1.8 TFSI Audi A4 B8 Avant 2.0 TFSI Audi A4 B8 Avant 2.0 TFSI Audi A4 B8 Avant 2.0 TFSI Audi A4 B8 Avant 2.0 TFSI quattro Audi A4 B8 Avant 2.0 TFSI quattro Audi A4 B8 Saloon / Limousine 1.8 TFSI Audi A4 B8 Saloon / Limousine 2.0 TFSI Audi A4 B8 Saloon / Limousine 2.0 TFSI Audi A4 B8 Saloon / Limousine 2.0 TFSI quattro Audi A4 B8 Saloon / Limousine 2.0 TFSI quattro Audi A4 B9 Avant 2.0 TFSI Audi A4 B9 Avant 2.0 TFSI Audi A4 B9 Saloon / Limousine 2.0 TFSI Audi A4 B9 Saloon / Limousine 2.0 TFSI quattro Audi A5 8F7 Cabriolet 1.8 TFSI Audi A5 8F7 Cabriolet 2.0 TFSI Audi A5 8F7 Cabriolet 2.0 TFSI Audi A5 8F7 Cabriolet 2.0 TFSI quattro Audi A5 8F7 Cabriolet 2.0 TFSI quattro Audi A5 8T3 Coupé 1.8 TFSI Audi A5 8T3 Coupé 2.0 TFSI Audi A5 8T3 Coupé 2.0 TFSI quattro Audi A5 8TA Sportback 1.8 TFSI Audi A5 8TA Sportback 2.0 TFSI Audi A5 8TA Sportback 2.0 TFSI Audi A5 8TA Sportback 2.0 TFSI quattro Audi A5 8TA Sportback 2.0 TFSI quattro Audi A6 C6 Avant 2.0 TFSI Audi A6 C6 Saloon / Limousine 2.0 TFSI Audi A6 C7 Avant 2.0 TFSI Audi A6 C7 Saloon / Limousine 2.0 TFSI Audi Q5 8RB 2.0 TFSI quattro Audi TT MK2 Coupé 8J 2.0 TFSI Audi TT MK2 Coupé 8J 2.0 TFSI Audi TT MK2 Coupé 8J 2.0 TFSI quattro Audi TT MK2 Coupé 8J 2.0 TTS quattro Audi TT MK2 Roadster 8J 2.0 TFSI Audi TT MK2 Roadster 8J 2.0 TFSI Audi TT MK2 Roadster 8J 2.0 TTS quattro Seat Alhambra 710, 711 1.8 TSI Seat Leon MK2 2.0 TFSI Seat Leon MK2 2.0 TFSI Cupra Seat Leon MK2 2.0 TFSI FR Skoda Octavia MK2 2.0 vRS Skoda Octavia MK2 2.0 vRS Skoda Octavia MK3 1.8 TSI Skoda Octavia MK3 1.8 TSI Skoda Octavia MK3 1.8 TSI 4x4 Skoda Octavia MK3 2.0 TSI RS Skoda Octavia MK3 2.0 TSI RS Skoda Octavia MK3 2.0 TSI vRS Skoda Octavia MK3 2.0 TSI vRS Skoda Octavia MK3 2.0 TSI vRS Volkswagen Beetle 5C1 2.0 TSI Volkswagen Beetle 5C1 2.0 TSI Volkswagen Beetle 5C7 2.0 TSI Volkswagen Beetle 5C7 2.0 TSI Volkswagen Golf MK5 2.0 GTI Volkswagen Golf MK5 2.0 GTI Edition 30 Volkswagen Golf MK6 2.0 GTI Volkswagen Golf MK6 2.0 R 4motion Volkswagen Golf MK6 2.0 R 4motion Volkswagen Golf MK6 2.0 R 4motion Volkswagen Golf MK7 2.0 GTI Volkswagen Jetta MK5 2.0 TFSI Volkswagen Jetta MK6 2.0 TSI Volkswagen Passat B6 2.0 FSI Volkswagen Passat B6 2.0 FSI Volkswagen Scirocco MK3 2.0 R Volkswagen Scirocco MK3 2.0 R Volkswagen Scirocco MK3 2.0 R Volkswagen Scirocco MK3 2.0 TSI Volkswagen Scirocco MK3 2.0 TSI Volkswagen Tiguan 5N 2.0 TFSI 4motion Volkswagen Tiguan 5N 2.0 TFSI 4motion Volkswagen Tiguan 5N 2.0 TSI 4motion Volkswagen Tiguan 5N 2.0 TSI 4motion

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

Introducing the Enhanced Edition LED H7 Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in ANY H7 Fitments and replaces the OEM lamp unit for an ultra bright replacement. This bulb can be used as a dipped & high beam upgrade as well as a foglight. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! No longer any need for clips & caps! The bulb is designed to fit in any H7 fixing without any adjustments or additional items, and utilising its 4 point technology, this can be orientated in either 2 or 4 location points to ensure the best output and zero polarity issues! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H7 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H7 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped & high beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H8 or H11 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H8/11 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

For hydraulic brake and clutch systems. Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3) Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual. Min. dry boiling point 260°C. Min. wet boiling point 165°C Notice Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs. Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water.  DOT 4 Technical Info Contents 500 ml Colour Pale Amber Chemical basis Butoxyethanol Shelf life from production 36 Month Min. wet boiling point 165 °C Min. dry boiling point 260 °C Density 1.052 g/ml Density conditions at 20°C pH value 7-11

Read more less

REAR UPPER WISHBONE INNER BUSH PFR85-514   OEM Part Number: Arm = 5Q0505323D / 5Q0 505 323 D OEM Part Number: Arm = 1K0505323N / 1K0 505 323 N --- REAR UPPER WISHBONE INNER BUSH PFR85-514BLK   OEM Part Number: Arm = 5Q0505323D / 5Q0 505 323 D OEM Part Number: Arm = 1K0505323N / 1K0 505 323 N --- fits: Audi A1 Quattro (2013), Audi S1 8X (2015 on), Audi A3 inc Quattro MK2 8P (2003-2012), Audi RS3 MK2 8P (2011-2013), Audi S3 MK2 8P (2006-2012), Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi RS3 MK3 8V (2015 - 2020), Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi RS3 MK4 8Y (2020 on), Seat Alhambra MK2 (2010 - ON), Seat Ateca Multi-Link (2016-ON), Volkswagen Beetle A5 Multi-Link (2011 - ON), Volkswagen Bora A5 (1K) (2005-2010), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK6 inc R 5K (2009-2012), Volkswagen Golf MK5 1K, Volkswagen Golf Mk5 GTI & R32, Volkswagen Golf Plus 5M, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK6 A6 Multi-Link (2011 - 2018), Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK5 A5 1K (2005-2010), Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon Mk2 1P (2005-2012), Skoda Octavia Mk2 1Z (2004-2012), Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Volkswagen Passat B6 & B7 Typ3C (2006-2013), Volkswagen Passat B8 (2013 on), Volkswagen Passat CC 35 (2008-2012), Audi Q2 4WD Quattro MULTI LINK, Audi Q3 8U, Audi RSQ3 8U,  Audi Q3 F3, Audi RSQ3 F3, Volkswagen Scirocco MK3 (2008 - 2017), Seat Altea 5P (2004-), Seat Tarraco (2018-), Volkswagen Sharan MK2 (2010 - ON), Skoda Kodiaq (2017 - ON), Skoda Yeti 5L (2009 - 2017), Skoda Superb (2009-2010), Skoda Superb (2010 - 2015), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen Tiguan 5N MK1 (2007 - 2017), Volkswagen Tiguan AD/BW MK2 (2017 on), Seat Toledo Mk3 5P (2004-2009), Volkswagen Touran (2003-2015), Volkswagen Touran (2017 - ), Audi TT MK2 8J (2007-2014), Audi TTRS MK2 8J (2009-2014), Audi TT / TTRS Mk3 FV/8S (2014 on), Volkswagen Vento A5 (2005 - 2010), Volkswagen Arteon (2017 on), Volkswagen CC (2012 - 2017), Volkswagen Eos 1F (2006-2016)

Read more less