Performance - BMW 1 Series F20 & F21 (2011-2019)

IMAGES ARE ONLY TO SHOW THE FINISH OF THE TIPS AND ARE NOT SPECIFICALLY THE TIPS YOU WILL RECIEVE! YOU WILL RECEIVE ONE EXHAUST TIP ONLY 1x 90mm Tip Assembly replacement tips for milltek system To replace existing or change current colour scheme This part is suitable for use on the following vehicles: Audi S4 3.0 Turbo V6 B9 - Saloon/Sedan & Avant (Non Sport Diff Models) - Left Hand Drive Cars Only (2016 and Later)Audi S4 3.0 Turbo V6 B9 - Saloon/Sedan & Avant (Non Sport Diff Models) - Right Hand Drive Cars Only (2016 and Later)Audi S5 3.0 V6 Turbo Sportback B9 (Non Sport Diff Models Only) - Right Hand Drive Cars Only (2017 and Later)Audi S5 3.0 V6 Turbo Sportback B9 (Non Sport Diff Models Only) - Left Hand Drive Cars Only (2017 and Later)BMW 1 Series 120i & 125i (F20 & F21 - B48 Engine Only inc OPF Models) (2016 to 2019)BMW 1 Series M140i 3 & 5 Door (F20 & F21 LCI, Non-OPF) (2015 to 2018)BMW 1 Series M140i 3 & 5 Door (F20 & F21 LCI, OPF/GPF Only) (2019 to 2020)BMW 2 Series M240i Coupe (F22 LCI, Non-OPF & None xDrive) (2015 to 2018)BMW 2 Series M240i Coupe (F22 LCI, OPF Only & Non xDrive Models) (2019 to 2020)BMW 2 Series M2 Coupé (F87) (2016 to 2018)BMW 2 Series M2 Competition Coupé (F87) (2018 and Later)BMW 3 Series F30 320i L M Sport Saloon (Long wheelbase) (LCI models, None xDrive, Non-OPF & B48 Engine) (2015 to 2019)BMW 3 Series F30 320i M Sport Saloon (LCI models, None xDrive, Non-OPF & B48 Engine) (2015 to 2019)BMW 3 Series F31 M340i Touring (2018 to 2019)BMW 3 Series F80 M3 & M3 Competition Saloon (Non OPF/GPF Models Only) (2014 to 2018)BMW 3 Series F80 M3, M3 Competition & M3 CS Saloon (OPF/GPF Models Only) (2019 to 2020)BMW 4 Series F82/83 M4 Coupe/Convertible & M4 Competition Coupé (Non-OPF equipped models only) (2014 to 2018)BMW 4 Series F82/83 M4 Coupe/Convertible, M4 Competition & M4 CS Coupé (OPF/GPF equipped models only) (2019 to 2020)Ford Fiesta Mk8 1.0T EcoBoost ST-Line 3 & 5 Door (Non-OPF/GPF Models Only) (2017 to 2019)Ford Fiesta Mk8 1.0T EcoBoost ST-Line 3 & 5 Door (100,125 & 140ps OPF/GPF Models Only) (2019 and Later)Ford Fiesta Mk8 1.0T EcoBoost ST-Line 3 & 5 Door (155ps Hybrid OPF/GPF Models Only (2020 and Later)Ford Fiesta Mk8 ST 1.5 EcoBoost 200PS (Pre Sept 2020 Models Only) (2018 to 2020)Ford Fiesta Mk8 & Mk8.5 ST 1.5 EcoBoost 200PS (Post Sept 2020 Models Only) (2020 and Later)Ford Mustang 5.0 V8 GT (Fastback) (2015 to 2018)Ford Puma ST 1.5 200ps EcoBoost (OPF/GPF Equipped) (2020 and Later)Ford Puma ST 1.0 170PS (OPF/GPF Equipped Vehicles) (2023 and Later)Ford Ranger 2.0TDCI 205PS Bi-Turbo Diesel (2022 and Later)Hyundai / Kia i20 N 1.6 T-GDi 204PS (OPF/GPF Equipped Cars Only) (2021 and Later)INEOS Grenadier B58 3.0 I6 Turbo Petrol (2023 and Later)INEOS Grenadier B57 3.0 I6 Turbo Diesel (2023 and Later)INEOS Quartermaster 3.0 (B58) Petrol (OPF & Non-OPF Vehicles) (2024 and Later)INEOS Quartermaster 3.0 (B57) Diesel (2024 and Later)Land Rover / Range Rover Defender D200, D250 & D300 90, 110 & 130 (Diesel Models) (2019 and Later)Land Rover / Range Rover Defender 90 2.0 I4 P300 & P400e (OPF/GPF and Non-OPF/GPF Equipped Vehicle Compatible) (2020 and Later)Land Rover / Range Rover Defender 90 3.0 I6 P400 (OPF/GPF and Non-OPF/GPF Equipped Vehicle Compatible) (2020 and Later)Land Rover / Range Rover Defender 110 2.0 I4 P300 & P400e (OPF/GPF and Non-OPF/GPF Equipped Vehicle Compatible) (2020 and Later)Land Rover / Range Rover Defender 110 3.0 I6 P400 (OPF/GPF and Non-OPF/GPF Equipped Vehicle Compatible) (2020 and Later)Land Rover / Range Rover Defender 130 2.0 I4 P300 & P400e (OPF/GPF and Non-OPF/GPF Equipped Vehicle Compatible) (2023 and Later)Land Rover / Range Rover Defender 130 3.0 I6 P400 (OPF/GPF and Non-OPF/GPF Equipped Vehicle Compatible) (2023 and Later)Land Rover / Range Rover Defender 90 5.0 V8 525PS (OPF/GPF Vehicles Only) (2021 and Later)Land Rover / Range Rover Defender 90 5.0 V8 525PS (NAS Non-OPF/GPF Vehicles Only) (2021 and Later)Land Rover / Range Rover Defender 110 5.0 V8 525PS (OPF/GPF Vehicles Only) (2021 and Later)Land Rover / Range Rover Defender 110 5.0 V8 525PS (NAS Non-OPF/GPF Vehicles Only) (2021 and Later)Land Rover / Range Rover Defender 130 5.0 V8 500PS (OPF/GPF Vehicles Only) (2023 and Later)Land Rover / Range Rover Defender 130 5.0 V8 500PS (NAS Non-OPF/GPF Vehicles Only) (2023 and Later)Mercedes G-Class G63 (W463) 4.0 Bi-Turbo V8 (ROW Non GPF/OPF Cars Only) (2019 and 2024)Mercedes G-Class G63 (W463) 4.0 Bi-Turbo V8 (UK/European GPF/OPF Cars Only) (2019 to 2024)Mercedes G-Class G63 (W465) 4.0 Bi-Turbo V8 (Both GPF/OPF EU & NAS Non-OPF Cars) (2024 and Later)New Mini Mk3 (F56) Mini Cooper S 2.0 Turbo (UK and European models & Pre-LCI Only) (2014 to 2018)New Mini Mk3 (F55) Mini Cooper S 2.0 Turbo - 5 Door Hatch (ROW/NA Models) (2014 and Later)New Mini Mk3 (F56) Mini Cooper S 2.0 Turbo (Rest of World) (2014 and later)New Mini Mk3 (F55) Mini Cooper S 2.0 Turbo - 5 Door Hatch (UK and European models) - LCI with GPF/OPF Only (2019 and Later)New Mini Mk3 (F56) Mini Cooper S 2.0 Turbo (UK and European models) - LCI with GPF/OPF Only (2019 to 2020)New Mini Mk3 (F56) Mini Cooper S 2.0 Turbo (UK and European models) - LCI with GPF/OPF Only - 70mm OE Systems (2020 to 2024)New Mini Mk3 Mini JCW & GP3 2.0 Turbo (UK and European models) - GPF/OPF Only (2020 and Later)Renault / Alpine A110 A110S 1.8TCe (S Models only) (2019 and Later)Volkswagen Polo GTI 2.0 TSI (AW - 5 Door) - Non GPF/OPF Models Only (2018 to 2019)Volkswagen Polo 1.5 TSI (AW 5 Door inc Facelift Models) - GPF/OPF Models Only (2019 and Later)Volkswagen Polo GTI 2.0 TSI (AW 5 Door PRE Facelift Models only) - GPF/OPF Models Only (2019 to 2021)Volkswagen Polo GTI 2.0 TSI 207ps (AW 5 Door Facelift Models) - GPF/OPF Models Only (2021 and Later)Volkswagen Up! 1.0TSI 90PS (3 & 5 Door) (2016 and Later)Volkswagen Up! GTI 1.0TSI 115PS (3 & 5 Door) (2018 and Later) Exhaust System numbers that use this part: SSXAU1077SSXAU1084SSXAU1177SSXAU1184SSXAU647SSXAU654SSXBM1036SSXBM1043SSXBM1049SSXBM1053SSXBM1059SSXBM1070SSXBM1075SSXBM1083SSXBM1089SSXBM1104SSXBM1109SSXBM1114SSXBM1116SSXBM1120SSXBM1123SSXBM1136SSXBM1143SSXBM1150SSXBM1167SSXFD229SSXFD242SSXFD247SSXFD252SSXFD259SSXFD289SSXFD295SSXFD349SSXFD354SSXFD394SSXFD400SSXFD446SSXHY156SSXHY161SSXINE104SSXINE109SSXINE118SSXINE125SSXLR103SSXLR108SSXLR113SSXLR118SSXLR123SSXLR128SSXLR133SSXLR138SSXLR143SSXLR148SSXLR153SSXLR158SSXLR166SSXLR171SSXLR176SSXLR181SSXLR186SSXLR207SSXLR212SSXLR217SSXLR222SSXLR237SSXLR242SSXM438SSXM441SSXM448SSXM458SSXM464SSXM470SSXM475SSXM484SSXM489SSXM500SSXMZ162SSXMZ167SSXMZ169SSXRN429SSXVW430SSXVW435SSXVW486SSXVW504SSXVW559SSXVW736

Read more less

Dual Port / Vent to Atmosphere: TS-0223-1050 The Multiple Award-winning Kompact EM Series of Upgraded Diverter Valves are the world’s first truly plug-and-play Upgrade solution for your factory diverter valve. Unplug and unbolt your OEM Valve, and install a Kompact EM Valve in its place. No adaptors, hoses or extra assembly are required. The Kompact EM Valve Series from Turbosmart takes the motorsport-proven, billet valve technology and adds an onboard proprietary solenoid system and internal pressure control channels for a simple plug-and-play valve with full OE integration and control. There are no reference hoses, separate solenoids, or fiddly bits – Just bolt-on and plugin! You can count on unmatched performance and reliability as a direct replacement for your factory diverter valve. The Kompact EM Valves overcome the common faults associated with plastic factory valves through our Boost-Balance Valve Design (The more boost you have, the better it seals), Positive Seal O-Ring on the Piston’s face and Billet Construction. No matter your application, the Kompact EM Series will hold more boost and be more responsive in any environment. Available InDual Port / Vent to Atmosphere: TS-0223-1050Plumback / Recirculating: TS-0223-1250 Key FeaturesBoost-Balance Valve TechnologyPatented integrated pressure controlTrue plug-and-play upgradeIntegrated proprietary high-temperature solenoid valveBillet construction with high-temperature o-ringsFitment available in Plumback or Dual Port optionsUSA Patent: 10,781,745AUS Patent: 2018253619 Suitable for BMW vehicles with the N20 and N26 engines. This BOV can be used in both the pneumatic and the electronic-activated turbo. Please look up the vehicle application list for more details. FITMENT MAKE Model Variant HP Fuel Engine Year Range BMW 125i F20 218HP Petrol (2.0L N20 B20) 2013 - 2017 BMW 125i F20 (EWG) 218HP Petrol (2.0L N20 B20) 2012 BMW 125i F20 (PWG) 218HP Petrol (2.0L N20 B20) 2012 BMW 220i F22 184HP Petrol (2.0L N20 B20) 2013 - 2015 BMW 220i F23 184HP Petrol (2.0L N20 B20) 2014 - 2016 BMW 228i F22 184HP Petrol (2.0L N20 B20) 2014 - 2016 BMW 228i F22 245HP Petrol (2.0L N26 B20) 2014 - 2016 BMW 228i F23 245HP Petrol (2.0L N20 B20) 2014 - 2016 BMW 320i F30 184HP Petrol (2.0L N20 B20) 2013 - 2018 BMW 320i F30 (EWG) 184HP Petrol (2.0L N20 B20) 2012 BMW 320i F30 (PWG) 184HP Petrol (2.0L N20 B20) 2012 BMW 320i GT F31 184HP Petrol (2.0L N20 B20) 2012 - 2015 BMW 320i GT F34 184HP Petrol (2.0L N20 B20) 2013 - 2016 BMW 328i F30 245HP Petrol (2.0L N20 B20) 2013 - 2018 BMW 328i F30 245HP Petrol (2.0L N26 B20) 2013 - 2018 BMW 328i F30 (EWG) 245HP Petrol (2.0L N20 B20) 2012 BMW 328i F30 (EWG) 245HP Petrol (2.0L N26 B20) 2012 BMW 328i F30 (PWG) 245HP Petrol (2.0L N20 B20) 2011 - 2012 BMW 328i F30 (PWG) 245HP Petrol (2.0L N26 B20) 2011 - 2012 BMW 328i GT F31 245HP Petrol (2.0L N20 B20) 2012 - 2015 BMW 328i GT F31 245HP Petrol (2.0L N26 B20) 2012 - 2015 BMW 328i GT F34 245HP Petrol (2.0L N20 B20) 2013 - 2016 BMW 328i GT F34 245HP Petrol (2.0L N26 B20) 2013 - 2016 BMW 420i F32 184HP Petrol (2.0L N20 B20) 2013 - 2017 BMW 420i F33 184HP Petrol (2.0L N20 B20) 2014 - 2016 BMW 420i F36 184HP Petrol (2.0L N20 B20) 2014 - 2017 BMW 428i F32 245HP Petrol (2.0L N20 B20) 2013 - 2017 BMW 428i F32 245HP Petrol (2.0L N26 B20) 2013 - 2017 BMW 428i F33 245HP Petrol (2.0L N20 B20) 2013 - 2017 BMW 428i F33 245HP Petrol (2.0L N26 B20) 2013 - 2017 BMW 428i F36 245HP Petrol (2.0L N20 B20) 2014 - 2016 BMW 428i F36 245HP Petrol (2.0L N26 B20) 2014 - 2016 BMW 520i F10 184HP Petrol (2.0L N20 B20) 2013 - 2016 BMW 520i F10 (EWG) 184HP Petrol (2.0L N20 B20) 2012 BMW 520i F10 (PWG) 184HP Petrol (2.0L N20 B20) 2011 - 2012 BMW 528i F10 245HP Petrol (2.0L N20 B20) 2013 - 2016 BMW 528i F10 (EWG) 245HP Petrol (2.0L N20 B20) 2012 BMW 528i F10 (PWG) 245HP Petrol (2.0L N20 B20) 2011 - 2012 BMW X1 20i E84 184HP Petrol (2.0L N20 B20) 2013 - 2015 BMW X1 20i E84 (EWG) 184HP Petrol (2.0L N20 B20) 2012 BMW X1 20i E84 (PWG) 184HP Petrol (2.0L N20 B20) 2011 - 2012 BMW X1 28i E84 245HP Petrol (2.0L N20 B20) 2013 - 2015 BMW X1 28i E84 (EWG) 245HP Petrol (2.0L N20 B20) 2012 BMW X1 28i E84 (PWG) 245HP Petrol (2.0L N20 B20) 2011 - 2012 BMW X3 20i F25 184HP Petrol (2.0L N20 B20) 2013 - 2017 BMW X3 20i F25 (EWG) 184HP Petrol (2.0L N20 B20) 2012 BMW X3 20i F25 (PWG) 184HP Petrol (2.0L N20 B20) 2011 - 2012 BMW X3 28i F25 245HP Petrol (2.0L N20 B20) 2013 - 2017 BMW X3 28i F25 (EWG) 245HP Petrol (2.0L N20 B20) 2012 BMW X3 28i F25 (PWG) 245HP Petrol (2.0L N20 B20) 2012 BMW X4 20i F26 184HP Petrol (2.0L N20 B20) 2014 - 2018 BMW X5 40e F15 245HP Petrol (2.0L N20 B20) 2015 - 2018 BMW Z4 20i E89 184HP Petrol (2.0L N20 B20) 2013 - 2016 BMW Z4 20i E89 (EWG) 184HP Petrol (2.0L N20 B20) 2012 BMW Z4 20i E89 (PWG) 184HP Petrol (2.0L N20 B20) 2011 - 2012 BMW Z4 28i E89 245HP Petrol (2.0L N20 B20) 2013 - 2016 BMW Z4 28i E89 (EWG) 245HP Petrol (2.0L N20 B20) 2012 BMW Z4 28i E89 (PWG) 245HP Petrol (2.0L N20 B20) 2011 - 2012  

Read more less

P3 V3 OBD2 Gauge Basic Features Plug and Play Install - plugs directly into your OBD2 port (Want to keep your OBD2 port open? The P3 hard-wire harness kit also available) OEM Integration - installs in your vent for a sleek install while retaining air flow Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analogue boost sensor Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units) Boost (via OBD2 port using OEM sensors or P3 analogue boost sensor) Coolant temperature Air/Fuel ratio (AFR or Lambda) Vehicle speed (can be calibrated in 1% increments from -9% to +20%) Intake air temperature Throttle angle Ignition timing Engine RPM Exhaust gas temperature Battery voltage Programmable shift light analogue input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor analogue input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor Acceleration timers (0-60mph/0-100mph/60-130mph) Braking timers (60-0mph/100-0mph) Optional Add-Ons P3 analogue Boost sensor - plugs directly into gauge harness, no wiring required) Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port

Read more less

Description FITS: F20 M135i 2012 - Pre June 2013 F20 M135i Post June 2013 - 2016 KEY FACTS Model: M135i (F20/F21) including xDrive Fits To: OEM / Scorpion Pipe Diameter: 80mm/3.15"   Scorpion's meticulous attention to detail and superior engineering skills put them at the very top in terms of construction quality and reliability. But the real difference is the way a Scorpion feels. No other exhaust feels like a Scorpion because no other exhaust is created with our passion and that's one thing which can never be copied. Scorpion's hand built systems not only give you real exclusivity, but added value too. We don't just charge what we feel the market will stand for a premium grade exhaust; when you upgrade to Scorpion you are paying for quality R&D, the finest hand selected materials, extensive testing and for the skill of an automotive engineer. You really are getting more bang for your buck.    Features: - Lifetime warranty - Hand made in the UK - Acoustically developed sound - Made from T304 grade stainless steel After its launch in the 1950’s the Fiat 500 was produced for almost 20 years going on to become an iconic model. When the decision was taken to relaunch the model in 2007 50 years after the first it was natural that Abarth a name synonymous with Fiat and performance would be involved producing their own 500/595/695 variants.  To compliment these Scorpion have developed a cat-back 63.5mm/2.5”, non-resonated system with a choice of 100mm Carbon Ascari, polished Daytona or black ceramic coated Daytona tailpipes. The cat back system not only enhances performance it gives a deeper sportier tone than the original. In addition, for the models with the Garret turbo fitted there is the option of a 76mm/3” de-cat downpipe for those wanting to further tune their 1.4 turbo Abarth’s. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle.

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:70mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:76mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:83mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:90mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This filter is designed to be fitted to the outside of a rigid pipe such as a MAF sensor housing. These filters have an rubber polymer neck and a cone shaped filter element. This enables easy fitting to space-restricted engine compartments, whilst providing a large surface to maximise potential air flow. The filters are constructed using stainless steel cage internal and our famous 15mm thick twin layer foam.  Ramair universal filters are designed and manufactured for a very diverse range of applications and are made here in the UK. They are available in many different sizes and styles available.  Clean using our filter maintenance kit - CK-003 This product has the following dimensions: Filter Internal Neck Diameter: You choose Filter Neck Length: 23mm Filter Overall Height: 130mm Filter Base Width: 150mm Filter Top Width: 93mm Filter Material: 15mm Dual Layer Foam

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This filter is designed to be inserted into a flexible hose such as a rubber or silicone intake pipe. These filters have an aluminium ram-pipe neck and a cone shaped filter element. This integral cone channels all the incoming air, towards the inlet manifold, and in doing so, reduces unnecessary turbulence. These filters are also cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of pleated surface area an added boost of power to your engine too! These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of motorsport filtration the pleated range by Ramair is the premium choice on the market today for your fast road or track car. With its large size, technologically advanced filter and bell mouth alloy spun base this filter kit is capable of handling extremely large power & flow rates. Filter Outer Neck Diameter: Select Your Option Filter Neck Length: 45mm (1.8inch) Filter Overall Length: 185mm (7.3inch) Filter Base Width: 150mm (5.9inch) Filter Top Width: 120mm (4.7inch) Filter Material: Pleated Nanofibre Filter Base Material: Aluminium Filter Base Finish: Black Powder Coat

Read more less

PRORAM induction kit for BMW 1/2/3 Series with the N20 engine Features Our performance synthetic nanofiber air filter, designed to optimise airflow. Offers proven performance gains – especially with a tuned vehicle.  Heat shield helps maintain low intake temperatures by providing a physical barrier between the air filter and the rest of the engine bay Includes all nuts bolts, hose clamps and high quality silicone hose connectors necessary to fit the kit to a standard car  Easy to clean using our filter maintance kit - CK-003 What Does It Do? This induction kit will increase the airflow into the turbo while increasing engine noise over the restrictive factory air intake system. This kit includes everything required for the fitting of the induction kit. What Will I Get? Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include: Black heat shield Black powder coated aluminium intake pipe Proram pleated filter Full fitting kit with easy step by step instructions including pictures Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2012-2020 BMW 1 Series (F20/F21/F40) 2.0 (N20) 2012-2021 BMW 2 Series (F22/F23/F44/F45/F46/F87) 2.0 (N20) 2011-2018 BMW 3 Series (F30/F31/F34/F80) 2.0 (N20) 2013-2017 BMW 4 Series (F32/F33/F36/F82/F83) 2.0 (N20)

Read more less

This performance intake kit is designed to fit BMW M2, 135i, 235i, 335i and 435i models from 2011 to 2018 with the N55 3.0L turbocharged petrol engines. Features 90mm intake diameter Matched OEM MAF sensor dimensions Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions Easy to clean using our filter maintance kit - CK-003 What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include: Black powder coated heat shield Carbon fibre lid Ramair foam filter Black silicone hose Black powder coated hard pipe CNC turbo adapter CNC PCV adapter Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2011-2015 BMW 3 Series (F30/F31/F34/F80) 3.0 (N55) 2013-2016 BMW 4 Series (F32/F33/F36/F82/F83) 3.0 (N55) 2011-2016 BMW 1 Series (F20/F21/F40) 3.0 (N55) 2013-2016 BMW 2 Series (F22/F23/F44/F45/F46/F87) 3.0 (N55) 2015-2018 BMW M2 (F22/F87) 3.0 (N55)

Read more less

This performance intake kit is designed to fit BMW 140i, 240i, 340i, 440i models from 2016 onwards with the B58 3.0L turbocharged petrol engines. Features 90mm intake diameter Matched OEM MAF sensor dimensions Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions Easy to clean using our filter maintance kit - CK-003 What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include: Black powder coated heat shield Carbon fibre lid Proram pleated air filter Black powder coated hard pipe Black silicone reducer Black silicone coupler Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: YEAR Make Model Engine 2015-2021 BMW 1 Series (F20/F21/F40) 3.0 (B58) 2013-2021 BMW 2 Series (F22/F23/F44/F45/F46/F87) 3.0 (B58) 2015-2019 BMW 3 Series (F30/F31/F34/F80) 3.0 (B58) 2016-2020 BMW 4 Series (F32/F33/F36/F82/F83) 3.0 (B58)

Read more less

This performance intake kit is designed to fit BMW 120i, 125i, 220i, 230i, 320i, 330i, 420i, 430i models from 2016 onwards with the B48 2.0L turbocharged petrol engines. Features 90mm intake diameter Matched OEM MAF sensor dimensions Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions Easy to clean using our filter maintance kit - CK-003 What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include: Black powder coated heat shield Carbon fibre lid Proram pleated filter Black powder coated hard pipe Black silicone couplers Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2015-2025 BMW 1 Series (F20/F21/F40) 2.0 (B48) 2013-2021 BMW 2 Series (F22/F23/F44/F45/F46/F87) 2.0 (B48) 2012-2025 BMW 3 Series (F30/F31/F34/F80) 2.0 (B48) 2013-2021 BMW 4 Series (F32/F33/F36/F82/F83) 2.0 (B48)

Read more less

This performance intake kit is designed to fit BMW 1&3 Series models from 2011 to 2022 with the N13-B16A 1.6L turbocharged petrol engines. Features 80mm intake diameter Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions Easy to clean using our filter maintance kit - CK-003 What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include: Black powder coated heat shield Ramair foam filter Black silicone coupler Black powder coated hard pipe CNC MAF housing Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2011-2019 BMW 1 Series (F20/F21/F40) 1.6 (N13-B16A) 2012-2016 BMW 3 Series (F30/F31/F34/F80) 1.6 (N13-B16A)

Read more less

Front Control Arm To Chassis Bush Original Series - Standard  Black Series- Track use/ Ready to race standard- PFF5-1902 is a reinforced replacement part that is 8% stiffer than the original bush to revitalise bush performance and restore steering precision. For a camber offset version of this bush please use PFF5-1902G. Black Series- Track/Race PFF5-1902BLK is a reinforced replacement part that is 8% stiffer than the original bush to revitalise bush performance and restore steering precision. For a camber offset version of this bush please use PFF5-1902GBLK. OEM Part Number: Arm = 31126852991 / 31 12 6 852 991 OEM Part Number: Arm = 31126852992 / 31 12 6 852 992    Price is per full set for car (x2) Vehicle fitment:BMW F20, F21 RWD (2011 - 2019), BMW F22, F23 (2013 on), BMW F3* Sedan / Touring / GT, BMW F32, F33, F36 (2013 -)  

Read more less

Front Radius Arm F8x M Conversion Bush PFF5-4901BLK PFF5-4901BLK Front Radius Arm F8x M Conversion Bush has been designed to fit the original equipment "M" radius arms but accommodates the wider subframe fitted to non-M cars. This new bush option allows older arms with worn bushes to be repurposed, saving the cost of buying new BMW arms at around £150 to £200 each. Seen more as a track/motorsport upgrade, these parts are available exclusively through our Black Series and made in our Black 95A material, paired with stainless-steel inner sleeves and CNC-machined outer shells for strength and improved load distribution. The increase in caster provided by this conversion and the fitment of our bush allows for greater in-corner camber gain, with improved front-end grip and turn-in. This makes it an ideal upgrade for any tuned M'lite looking to head out on track, and it serves as great accompaniment for our PFF5-1902GBLK Camber Adjustable Bushes.   Vehicle Fitment:BMW F20, F21 RWD (2011 - 2019), BMW F22, F23 (2013 on), BMW F3* Sedan / Touring / GT, BMW F32, F33, F36 (2013 -)

Read more less

FITMENT: 1 SERIES F20/F21/F40 M140i 2 SERIES F22/F23 M240i 3 SERIES G20/G21 M340i 4 SERIES F32/F33/F36 M440i B58 ENGINE! Product Description +11 BHP  +19NM Torque Induction kit and inlet hose included Improved induction noise Full instructions Prepreg 2x2 twill formed carbon fibre Lifetime warranty This product is a direct fit for the OEM part 13718580424 (replaces just the upper airbox and panel filter) & 13718601682 (replaces just the turbo inlet to airbox section). The B58 engine is a masterpiece from BMW, it makes great power, produces a fantastic noise and with the addition of FMINDK50 you can take these qualities even further. When our development team analysed the OEM airbox and inlet tract on the BMW M140i kindly loaned to us from The Performance Company, we came up with a multiple part solution to maximise all areas. The Development Journey Step 1:  UK and some EU spec M140i’s have a blank which stops the low-pressure zone that builds up in front of the radiator from entering the inlet tract. We created FMINLD2, a carbon fibre sculped duct to replace the blank, and route more air into the tract towards the airbox.  Step 2: Now that this greater quantity of air has entered the airbox, we need a greater surface area of filtration to maximise the airflow towards the engine. Therefore, we decided on a high-flow performance cone filter and used our development of other upper airbox induction kits to inform our design process to create FMINDK50. Step 3: The weak link was now the OEM inlet hose with its sound resonator and accordion ribs which cause turbulence and slows down the airflow. We created FMINLH25 (included with this kit) from a multi-ply smooth silicone to significantly reduce turbulent airflow, and to handle big boost builds. We also increased its diameter from 85mm to 90mm.   We used SolidWorks CAD, 3D prints and numerous dyno sessions to truly unlock the power. Simulation testing played a large part in the design process to help maximise the airflow. We were able to experiment with the airflow entering the chamber from the inlet tract into the lower airbox, by changing the position of the filter, the size and location of the louvres and other variables to ensure that the intake is maximising performance. The 3D printed prototypes helped with comparing our simulation testing to real world driving conditions. Please see our video on YouTube which shows dyno testing of our final prototype. This is a valuable comparison that is used in the top tiers of motorsport, now being brought to your vehicle. *Get 10% off the induction kit and inlet duct when purchased together (code automatically applied at checkout) The Carbon Fibre Using carbon fibre brings obvious benefits of strength, lightweight and aesthetics. However, a part that is often forgotten is its low thermal conductivity, which means it reduces heat soak and transmission of said heat to nearby items. Keeping Inlet Air Temps (IAT’s) low is often a difficult part of developing induction systems, so replacing metal or plastic inlet solutions for FMINDK50 will help decrease IAT’s and increase the volume of air supplied to your vehicles engine that is compressed by the turbo charger. This has a better effect on performance when cool as this is to provide the engine with more oxygen (denser air), thus improving the combustion in each cylinder. In addition, by regulating and reducing the air temperature, it also increases the reliability of an engine by keeping the AFRs (Air Fuel Ratios) in each cylinder at a safe level, which in turn, can increase an engines power due to the air being cooler. A bigger bang is then created within the cylinder, providing the correct amount of fuel is added. This can equate to an increase in BHP and torque. The Inlet Hose The sound resonator and accordion ribs on the OEM inlet hose cause significant turbulence to the airflow causing a detriment to the engine’s potential performance. Our improved solution, FMINLH25 (included in this kit), gives you a host of performance upgrades, including: Improved induction noise. Multi ply silicone construction improves longevity of FMINLH25 over that of the OEM hose. 5 ply silicone construction will be able to handle strain of engine mapping far better than OEM hose. Increase of diameter at airbox end from 85mm to 90mm. Lifetime warranty. Testing   Testing was completed using Performance Remap in Gloucester with their VTEC 4 wheel drive dynamometer. This was to ensure all our data has been achieved with results as accurately as possible by an independent tuner. The results below speak for themselves, also with the added benefit of being a very easy component to fit with no specialist tools this is superb, affordable modification for the BMW enthusiast. From the Dyno Graph shown above performance gains can be expected from 2500RPM to the red line with 11BHP and around 16NM of torque at peak RPM. The torque increase is clearly visible on the dyno graph and is clear when driving the car. As soon as it comes onto boost you can feel that hit of extra torque pushing you all the way to the redline. The M140i tested on the dyno was stock other than a Pipercross performance panel filter, but with a tuned vehicle you will see greater percentage gains as the vehicle will be able to utilise the increase in volume of cold air. FMINDK50 is part of our acclaimed Hi Flow range and will ensure that your vehicle is getting critical cold air. Not only is the Forge part a better option for performance, but the carbon fibre really helps to give the engine bay some character. The weave of the carbon has been optimised to match the carbon on the intake manifold, which really shows the level of detail we put into our designs. The high-quality carbon fibre is prepreg 2x2 twill formed in an autoclave from billet tooling and finished with an anti UV gloss gel coat. The Forge Motorsport lifetime warranty* on all hardware products shows the trust we have in the quality of our products while they are being enjoyed on your pride and joy. The kit comes complete with everything you need for installation (FMINDK50 carbon induction kit and FMINLH25 inlet hose), which can be carried out in around 1 hour, including a set of full colour instructions. For such an easy to fit product it truly does create some remarkable gains. If you are looking at whether FMINDK50 fits a vehicle not specified in our compatible vehicle listing, please check if your OEM upper airbox has a channel for the strut bar to fit through, if it does FMINDK50 will not fit your vehicle. Please contact us with a photo of your engine bay if you have any questions. Induction Kit and Inlet Duct Package FMINLD2 is a simple bolt-on product which is easy to fit in approximately 45 minutes with no specialist tool, drilling or cutting required. Not only is the Forge part a better option for performance, but the carbon fibre really helps to give the front of your BMW a pleasant aesthetic appearance. The high-quality composite fibre is manufactured from 100% prepreg 2x2 carbon fibre twill formed in an autoclave from billet tooling and finished with an anti UV gloss gel coat.  Get 10% off FMINDK50 and FMINLD2 when bought together (code automatically applied at checkout) *Please note - the filter is excluded from the Forge lifetime warranty*

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

When looking at the B58 engine within the M140i/240i/340i/440i engine bay it’s clear that BMW had left some room for modification within the inlet tract, the sound resonator and accordion ribs cause significant turbulence to the airflow causing a detriment to the engine’s potential performance. By removing these, and replacing it with five-ply silicone construction you gain a host of performance upgrades, including: Significant power gain of over 9bhp engine power and 7nm of torque. Improved induction noise. Multi ply silicone construction improves longevity of FMINLH25 over that of the OEM hose. 5 ply silicone construction will be able to handle strain of engine mapping far better than OEM hose. Fitting with no specialist tools in approximately half an hour.   Vehicle Fitment: BMW 1 Series F20/F21/F40 3/5 Dr Hatchback 2012 Onwards M140i 2016-2019 (B58) 2 Series F22/F23 2Dr Coupe/Convertible 2014 Onwards M240 2016-2021 (B58) 3 Series F30/F31 Saloon/Estate 2011-2019 340i 2015-2019 (B58) Testing was completed using Performance Remap in Gloucester with their VTEC 4 wheel drive dynamometer, This was to ensure all our data has been achieved with results as accurately as possible by an independent tuner. The results below speak for themselves, also with the added benefit of being a very easy component to fit with no specialist tools this is superb, affordable modification for the BMW enthusiast. From the dyno graph shown, performance gains can be expected from 4500RPM to the red line with +9BHP and +7NM of torque at peak RPM. Not only is FMINLH25 a functional improvement, but with it being available in black and red this product really helps to improve the aesthetics of the engine bay. One major difference of FMINLH25 is the diameter of the hose at the airbox end. Usually this is 85mm diameter, however FMINLH25 is 90mm diameter, and uses a silicone reducer sleeve so that it fits the OEM airbox correctly. This increase of 5mm diameter allows the inlet hose to be used with a wider variety of airbox/intake systems while also increasing the volume and de-restricting the flow of the OEM part,     This product is a direct fit for the OEM part 13718601682 (just the turbo inlet to airbox section). The hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments and will enhance any engine bay both technically and aesthetically. Lifetime warranty. Why not pair this with our Forge Motorsport replacement high flow panel filter (FMPAN-0172) if you are using the OEM airbox.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M140i performance exhaust downpipe fits from the turbo to the centre exhaust to replace the standard catalyst. The flow sports catalyst option includes a 4.5in/114.3mm 200 cell high flow sports catalyst matched with 4.5"/114.3mm reducing to 3"/76.2mm pipework. The de-cat option is manufactured utilising 3.5"/88.9mm pipework.  The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sports catalyst version replaces a factory emissions device and is not EC homologated. This may not meet current emission laws for road use in your territory.  All relevant fittings and gaskets are supplied. Press Release Designed and manufactured to uncompromising standard, Cobra Sport has matched performance improvements with re-defined sound to offer an exciting exhaust upgrade offering for M140i owners. The Cobra Sport research and development team quickly made the decision to base the new performance cat back exhaust systems for the BMW M140i on 3" (76.2mm) T304 stainless steel pipework. This mandrel bent pipework allows the engine to breathe and contributes to the aim for the largest natural performance improvements. The new cat back exhausts offer a significant weight advantage with the Cobra Sport system weighing only 16.32kg giving a 21% decrease from the OEM weight of 20.75kg. The sound of the new Cobra Sport exhausts boast vastly improved tonal characteristics with the non resonated cat back exhaust offering a deeper more aggressive sound with an overall increase of +4.6dB to 86.8dB on the static 4,000rpm sound test. Within the cabin the redefined sound remains comfortable registering 81.6dB under full load. The new systems for the M140i are based around a cat back configuration with the option for either a resonated or louder non resonated centre section. These cat back systems can be matched with a choice of replacement front pipe options in the form of either a sports cat or a de-cat pipe to create the most dynamic sound track and performance potential. Testing of the standard M140i revealed power figures of 327 whp and 367 lbft. Working in conjunction with one of our tuning partners AET Motorsport, we installed the Cobra Sport turbo back system (with de-cat) on the AET Motorsport development car and ran further power testing. With the Cobra Exhaust installed, the M140i recorded 349.2 whp and 389.9 lb-ft, an increase of 22 whp and 23 lb-ft with a fantastic sound track to match. Taking this one step further, AET installed Burger Motorsport JB4 and the EWG loom and ran dyno power runs on map 1,2 and 5. The best results were seen to be on Map 5 where the BMW M140i produced 423 whp and 453 lb-ft this means an overall increase of 96 whp and 86 lb-ft over the stock vehicle. Cobra Sport Sales Manager Matt Thomas commented "Building on an existing first class reputation in the BMW tuning market, we're excited to be adding the Cobra Sport sound and performance upgrade to the stunning M140i. Through optimised gas flow technology, the downpipes have been designed for fitment in conjunction with engine tuning requirements with our tuning partners reporting exceptional power gains, all made possible by the Cobra Sport exhaust upgrade." Cobra Sport have improved the subtle styling of the BMW M140i, creating a more aggressive and balanced look to the rear of the car with a choice of dual 3.5" (88.9mm) inward rolled baffled or inverted highly polished stainless steel tailpipes. Media Sound and First Drive - BMW M140i Stage 2 - Cobra Sport Exhausts Exhaust Talk Episode Two - Sports Catalyst vs De-Cat Performance Exhausts

Read more less

Cobra Sport stainless steel BMW OE factory looking exhaust tips enhance the style of your vehicle giving you the ultimate driving experience. These original looking straight-cut 3.5" (88.9mm) exhaust tips have been specially designed as a direct replacement to fit F20/F21 M135i equipped with the 3L N55 engine. The tips have a larger than the standard diameter of 3.5", offering an increase of 0.5"/12.7mm, substantially enhancing the looks of the existing BMW exhaust. The stock BMW tailpipes are prone to rust after a period of time, the premium materials used in these replacement tips eradicate these issues. These BMW M Performance style tips are supplied as a pair and are available in stainless steel or stealthy ceramic black, and offer a 15% increase in overall diameter over the stock tailpipes. The slip-on design make these replacement tailpipes quick and easy to install as they fit directly onto the O/E locator pins, and no modification is required, making them a direct replacement for BMW part: 18307610633. Please note: this item comes with a one year warranty. Media

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M140i performance exhaust is made in 3"/76.2mm pipework and fit from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections. The resonated exhaust option includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version which is a louder option, as it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. Fits both PPF and earlier pre-PPF models - requires mandatory ECU reflash when fitted to PPF models. Fitment to PPF equipped models is for motorsport and off road use only. Press Release Designed and manufactured to uncompromising standard, Cobra Sport has matched performance improvements with re-defined sound to offer an exciting exhaust upgrade offering for M140i owners. The Cobra Sport research and development team quickly made the decision to base the new performance exhaust systems for the BMW M140i on 3" (76.2mm) T304 stainless steel pipework. This mandrel bent pipework allows the engine to breathe and contributes to the aim for the largest natural performance improvements. The new cat back exhausts offer a significant weight advantage with the Cobra Sport system weighing only 16.32kg giving a 21% decrease from the OEM weight of 20.75kg. The sound of the new Cobra Sport exhausts boast vastly improved tonal characteristics with the non resonated cat back exhaust offering a deeper more aggressive sound with an overall increase of +4.6dB to 86.8dB on the static 4,000rpm sound test. Within the cabin the redefined sound remains comfortable registering 81.6dB under full load. The new systems for the M140i are based around a cat back configuration with the option for either a resonated or louder non resonated centre section. These cat back systems can be matched with a choice of replacement front pipe options in the form of either a sports cat or a de-cat pipe to create the most dynamic sound track. Testing of the standard M140i revealed power figures of 327 whp and 367 lbft. Working in conjunction with one of our tuning partners AET Motorsport, we installed the Cobra Sport turbo back system (with de-cat) on the AET Motorsport development car and ran further power testing. With the Cobra Exhaust installed, the M140i recorded 349.2 whp and 389.9 lb-ft, an increase of 22 whp and 23 lb-ft with a fantastic sound track to match. Taking this one step further, AET installed Burger Motorsport JB4 and the EWG loom and ran dyno power runs on map 1,2 and 5. The best results were seen to be on Map 5 where the BMW M140i produced 423 whp and 453 lb-ft this means an overall increase of 96 whp and 86 lb-ft over the stock vehicle. Cobra Sport Sales Manager Matt Thomas commented "Building on an existing first class reputation in the BMW tuning market, we're excited to be adding the Cobra Sport sound and performance upgrade to the stunning M140i. Through optimised gas flow technology, the downpipes have been designed for fitment in conjunction with engine tuning requirements with our tuning partners reporting exceptional power gains, all made possible by the Cobra Sport exhaust upgrade." Cobra Sport have improved the subtle styling of the BMW M140i, creating a more aggressive and balanced look to the rear of the car with a choice of dual 3.5" (88.9mm) inward rolled baffled or inverted highly polished stainless steel tailpipes. Media Example of BMW M140i sports exhaust (Cat Back - Non Resonated) Interior Sound Example of the BMW M140i sports exhaust (Cat Back - Non Resonated) Rolling Road Power Testing - BMW M140i Sports Exhausts (De-Cat + Non Resonated Cat Back)

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M135i performance exhaust is made in 3"/76.2mm pipework and fits from the turbo to the centre exhaust to replace the standard catalyst. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sport catalyst version replaces factory emissions device and is not EC homologated. This may not meet current emission laws for road use in your territory. All relevant fittings and gaskets are supplied. With the Cobra Sport de-cat fitted, independent testing revealed an increase of 20bhp at the wheels and 28 lb-ft of torque before a re-map was applied (please see dyno graph in product images). Press Release Cobra Sport are pleased to announce the launch of their performance exhaust systems for the BMW M135i (F20/F21) 3 & 5 Door. Designed and manufactured to uncompromising standard, Cobra Sport have matched performance improvements with re-defined sound to offer an exciting package for M135i owners. The Cobra Sport research and development team quickly made the decision to base the new performance exhaust systems for the BMW M135i on 3" (76.2mm) T304 stainless steel pipework. This pipework allows the engine to breathe and contributes to our aim for the largest natural performance improvements.  Cobra Sport Sales Manager Matt Thomas commented "We're very excited about the release of the system for the M135i. The 3.0 litre engine has a fantastic reputation and our Research and Development team have been able to extract excellent power gains. The pick of the systems is the non resonated cat back exhaust, the sound is incredible with a beautiful pitch and tone. The sound from this system brought a local street to a standstill when out testing so I anticipate the systems to be a great success". The new systems for the M135i are based around a cat back configuration with the option for either a resonated or louder non resonated centre section. These cat back systems can be matched with a choice of replacement front pipe in the form of either a sports cat or a de-cat pipe to create the most dynamic sound track.

Read more less