Performance - BMW 2 Series F44 / G42 / U06 / G87 (2020-Present)

MST Performance have developed this turbo inlet kit for the BMW G series B58 engine. Using our silicone pipe to replace the OEM plastic pipe design that restricts airflow & muffler. Creating more power & better turbo response. The smooth interior of our silicone pipe maximizes the airflow. Features: No more OEM pipe design that restricts the airflow. Enhanced turbo response & engine power output. High heat resistant silicone pipe, more durable than the OEM pipe. Remove the OEM muffler design. Direct installation while still keeping the OEM airbox. No need for tuning. Vehicle Fitment: BMW 240i (G4x) – 3.0T B58 – 2019+ BMW 340i inc. xDrive (G2x) – 3.0T B58 – 2019+ BMW 440i inc. xDrive (G2x) – 3.0T B58 – 2019+ BMW Z4 (G2x) – 3.0T B58 – 2019+ Toyota Supra A90/A91 – 3.0T B58 – 2019+

Read more less

This is a performance enhancing induction kit for the B58 engine M340i G20/G21/G22/G23 and M240i G42. Features Improved throttle response Black powdercoated heat shield and inlet pipe Dyno results: max gains 12-14bhp (this may vary dependant on vehicle) Easy to maintain dry pleated filter Cold air straight to the turbo charger What Does It Do? This induction kit delivers increased air flow and induction noise over the standard restrictive air box. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black powdercoated heat shield Black powdercoated 4" inlet pipe 4" red pleated filter Silicone joiner Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2021-2025 BMW 2 Series (G87/G42) 3.0 (B58) 2019-2025 BMW 3 Series (G20/G21/G28/G81) 3.0 (B58)

Read more less

**DOES NOT FIT BMW F44 2 SERIES GRAN COUPE** P3 V3 OBD2 Gauge Basic Features Plug and Play Install - plugs directly into your OBD2 port (Want to keep your OBD2 port open? The P3 hard-wire harness kit also available) OEM Integration - installs in your vent for a sleek install while retaining air flow Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analogue boost sensor Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units) Boost (via OBD2 port using OEM sensors or P3 analogue boost sensor) Coolant temperature Air/Fuel ratio (AFR or Lambda) Vehicle speed (can be calibrated in 1% increments from -9% to +20%) Intake air temperature Throttle angle Ignition timing Engine RPM Exhaust gas temperature Battery voltage Programmable shift light analogue input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor analogue input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor Acceleration timers (0-60mph/0-100mph/60-130mph) Braking timers (60-0mph/100-0mph) Optional Add-Ons P3 analogue Boost sensor - plugs directly into gauge harness, no wiring required) Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port

Read more less

  By replacing the restrictive secondary catalytic converters located in the mid-pipe section directly after the downpipes, back pressure is reduced, which effectively improves the engine’s breathing by allowing it to expel gases more quickly. This in return means faster throttle response, increased power output and a more aggressive exhaust note. Measuring 3.5” in diameter, this direct replacement mid-pipe offers improved flow over standard and comes complete with a replacement exhaust brace and fitting kit, which will mate to original catalytic converters, aftermarket sports cats or aftermarket de-cats. Will fit the following models:     BMW G87 M2 (left and right-hand drive) Please note:   Sports cats are sold for motorsport and off road use only an will not pass a UK MOT test or police road side checks.    An ECU recalibration is required in order to ensure the EML is not illuminated. Features:     Direct replacement part to fit both left and right-hand drive     Removes restrictive secondary catalytic converters and GPF     Made from high quality stainless-steel     Smooth bends to ensure increased flow     Fits standard cats, aftermarket sports cats or aftermarket de-cats     Comes complete with fitting kit AIRTEC Part No: ATEXHBMW7

Read more less

This performance intake kit is designed to fit M2, M3, M4 and competition models from 2020 to 2023 with the S58 3.0L turbocharged petrol engines. Features Carbon lids for both heatshields  90mm intake diameter Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions Easy to clean using our filter maintance kit - CK-003 What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include: Black powder coated heat shields Proram pleated filters Black silicone hoses Black powder coated hard pipe CNC turbo adapters Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2022-2025 BMW M2 (G87) 3.0 (S58) 2020-2025 BMW M3 (G20/G28/G80) 3.0 (S58) 2020-2025 BMW M3 Competition (G20/G28/G80) 3.0 (S58) 2022-2023 BMW M4 CSL (G22/G82) 3.0 (S58) 2020-2025 BMW M4 Competition (G22/G82) 3.0 (S58) 2020-2025 BMW M4 (G22/G82) 3.0 (S58) 2024-2025 BMW M4 CSL (G22/G82) 3.0 (S58)

Read more less

K-Brace® For BMW M2 G87 (Rear Strut Brace) Improves vehicle stability and control. Provides an extra layer of safety during impacts Engine / Model - Fits All BMW G87 Models Year: 2023-26 Mounting points - 4 Fitting kit included International delivery available Un-Coated strut braces are dispatched within 7 working days Powder Coated braces are usually dispatched within 14 working days

Read more less

PFR5-2313-26 - NORMAL DRIVE Made in our 95A Durometer material to restore performance, precision and cornering stability, enhancing the driving experience of your vehicle. Each set of bushes comes with appropriately sized, precision machined Anti-Roll Bar Lateral Support Clamps, to grip the original BMW anti-roll bars, preventing wandering or lateral offset in the suspension system after removing the bonded bushes.  PFR5-2313-26BLK 0- BLACK RACE TRACK READY  Made in our 95A Durometer material to restore performance, precision and cornering stability, enhancing the driving experience of your vehicle. Each set of bushes comes with appropriately sized, precision machined Anti-Roll Bar Lateral Support Clamps, to grip the original BMW anti-roll bars, preventing wandering or lateral offset in the suspension system after removing the bonded bushes. OEM Part Number: Bar = 33558091428 / 33 55 8 091 428  SODL AS SET OF 2 -NEEDED FOR CAR  FITS:BMW G87 M2 (2023 on), BMW G80 M3 (2020 on), BMW G82, G83 M4 (2020 on)

Read more less

This is a performance enhancing induction kit for the 2021+ BMW M3 & M4 G80/G82 Competition & G87 M2 S58. Features Improved throttle response Black powdercoated heat shield and inlet pipe Dyno results: max gains 12-14bhp (this may vary dependant on vehicle) Easy to maintain dry pleated filter Cold air straight to the turbo charger What Does It Do? This induction kit delivers increased air flow and induction noise over the standard restrictive air box. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black powdercoated heat shield Black powdercoated 4" inlet pipe 4" red pleated filter Silicone joiner Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2022-2025 BMW M2 (G87) 3.0 (S58) 2020-2025 BMW M3 (G20/G28/G80) 3.0 (S58) 2020-2025 BMW M3 Competition (G20/G28/G80) 3.0 (S58) 2022-2025 BMW M4 CSL (G22/G82) 3.0 (S58) 2020-2025 BMW M4 Competition (G22/G82) 3.0 (S58) 2020-2025 BMW M4 (G22/G82) 3.0 (S58)

Read more less

PFF5-2303-29 - normal drive Made in our 95A Durometer material to restore performance, precision and cornering stability, enhancing the driving experience of your vehicle. Each set of bushes comes with appropriately sized, precision machined Anti-Roll Bar Lateral Support Clamps, to grip the original BMW anti-roll bars, preventing wandering or lateral offset in the suspension system after removing the bonded bushes  PFF5-2303-29BLK - black race ready Made in our 95A Durometer material to restore performance, precision and cornering stability, enhancing the driving experience of your vehicle. Each set of bushes comes with appropriately sized, precision machined Anti-Roll Bar Lateral Support Clamps, to grip the original BMW anti-roll bars, preventing wandering or lateral offset in the suspension system after removing the bonded bushes. OEM Part Number: Bar = 31358091419 / 31 35 8 091 419Size 29mm sold as a pair- needed for car    FITS:BMW G87 M2 (2023 on), BMW G80 M3 (2020 on), BMW G82, G83 M4 (2020 on)      

Read more less

This is a replacement panel filter to fit BMW M2 M3 M4 3.0T S58. For a full list of fitments see compatibility chart. Features High Performance, MAF Safe, twin layer, fully reticulated foam Fits in the OEM Airbox and replaces inefficient paper filter Easy to clean using our filter maintenance kit - CK-003 Stainless steel cage support structure Guaranteed surface area using high quality custom blended polymer What Does It Do? The Ramair Panel Filter range is made from twin core Ramair Aeriform foam and our stainless steel cage which is used in many of our tier 1 Motorsport applications for maximum strength. A rubber polymer surround gives a fantastic clean and smooth finish with longevity in mind. These filters are direct replacements for the OEM air filter in your car, making this filter easy to fit and maintain. Ramair twin core foam is unique and like no other in the market. Our foam is designed to give maximum dust filtration along with optimum performance.   Filter Length: 272mm & 258mm Filter Width: 242mm & 241mm Filter Shape: Unique Filter Material: 15mm Dual Layer Foam Fitment Compatibility Chart This product fits the following: MAKE MODEL ENGINE YEAR BMW M2 (G87) 3.0T S58 2022-2023 BMW M3 CS (G20/G28/G82) 3.0T S58 2022-2023 BMW M3 (G20/G28/G82) 3.0T S58 2022-2023 BMW M3 Competition (G20/G21/G28/G80 3.0T S58 2022-2023 BMW M4 CSL (G22/G82) 3.0T S58 2022-2023 BMW M4 Competition (G22/G23/G82/G83) 3.0T S58 2022-2023 BMW M4 (G22/G82) 3.0T S58 2022-2023

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

By replacing the restrictive primary catalytic converters located in the original downpipes with specially designed high-flow sports cats, back pressure is reduced, which effectively improves the engine’s breathing by allowing it to expel gases more quickly. This in return means faster throttle response, increased power output and a more aggressive exhaust note. Complete with replacement fitting kit, the downpipes will mate to a standard or aftermarket exhaust system and come wrapped in a heat reducing covering. Will fit the following models: •     BMW G87 M2 (left and right-hand drive) •     BMW G80 M3 (left and right-hand drive) •     BMW G82 M4 (left and right-hand drive) Please note: -     Sports cats are sold for motorsport and off road use only and may not pass a UK MOT test or police road side checks. -     An ECU recalibration is required in order to ensure the EML is not illuminated. Features: •     Direct replacement part to fit both left and right-hand drive •     200 cell sports cats reduce restriction •     Made from high quality stainless-steel •     Fits original and aftermarket exhaust systems •     AIRTEC Motorsport laser cut plaque •     Heat reducing covering included •     Comes complete with fitting kit AIRTEC Part No: ATEXHBMW4

Read more less

By removing the restrictive primary catalytic converters located in the original downpipes, back pressure is hugely reduced, which effectively improves the engine’s breathing by allowing it to expel gases more quickly. This in return means faster throttle response, increased power output and a more aggressive exhaust note. Complete with replacement fitting kit, the downpipes will mate to a standard or aftermarket exhaust system and come wrapped in a heat reducing covering. Will fit the following models: •     BMW G87 M2 (left and right-hand drive) •     BMW G80 M3 (left and right-hand drive) •     BMW G82 M4 (left and right-hand drive) Please note: -     Sports cats are sold for motorsport and off road use only and may not pass a UK MOT test or police road side checks. -     An ECU recalibration is required in order to ensure the EML is not illuminated. Features: •     Direct replacement part to fit both left and right-hand drive •     Removes restrictive primary catalytic converters •     Made from high quality stainless-steel •     Fits original and aftermarket exhaust systems •     AIRTEC Motorsport laser cut plaque •     Heat reducing covering included •     Comes complete with fitting kit AIRTEC Part No: ATEXHBMW5

Read more less

Note: This front downpipe fits to the standard exhaust only. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M235i xDrive Gran Coupe performance exhaust is made in 3"/76.2mm pipework and fits from the turbo to the PPF section. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sports catalyst version replaces a factory emissions device and is not EC homologated. This may not meet current emission laws for road use in your territory.  All relevant fittings and gaskets are supplied for fitment. Fitment will require basic engine tuning at time of fitment to cancel the EML light. Media  

Read more less

Fitment will require basic engine tuning at time of fitment to cancel the EML light. Fitment is for motorsport and off road use only. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M235i Gran Coupe performance exhaust is made in 3"/76.2mm pipework and fits from the downpipe to the centre section, replacing the GPF exhaust section. This exhaust makes the system louder as it removes the GPF filter and therefore, offers a significantly sportier exhaust note. The resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. Fitment will require basic engine tuning at time of fitment to cancel the EML light. Fitment is for motorsport and off road use only as it removes the PPF filter.  Media Example of the Cobra Sport BMW M135i Exhaust (GPF Back with Box Delete)

Read more less

Cobra Sport's all-new carbon fibre slip-on replacement tailpipes transform the styling of your 2 Series. Cobra Sport carbon fibre BMW OE factory replacement exhaust tips enhance the style of your vehicle giving you the ultimate driving experience. These original looking 4" (101.6mm) exhaust tips have been specially designed as a direct replacement to fit a range of B47 & B48 engined G-Chassis BMWs. The tips have a larger than the standard diameter of 4", offering an increase of 0.45"/11.6mm, substantially enhancing the looks of the existing BMW exhaust. The stock BMW tailpipes are prone to rust after a period of time, the premium materials used in these replacement tips eradicate these issues. These BMW Carbon Fibre M Performance style tips are supplied as a pair, and offer over a 10% increase in overall diameter over the stock tailpipes. The slip-on design make these replacement tailpipes quick and easy to install as they fit directly onto the O/E locator pins, and no modification is required, making them a direct replacement for BMW part: 18308485758. This tailpipe upgrade is designed to fit the following models: BMW 2 Series (G42) - 220i, 230i & 220d BMW 3 Series (G20/G21) - 318i, 320i, 330i, 330e, 320d & 330d BMW 4 Series (G22/G23) - 420i, 430i, 420d & 430d Please note: this item comes with a one year warranty.  

Read more less

Note - This product is designed without a silencer and will be loud. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M240i xDrive performance exhaust is made in 3"/76.2mm pipework and replaces the rear silencer, which limits the audible exhaust output of the B58 turbocharged straight 6. This innovative axle back Venom exhaust system removes the rear silencer allowing the M240i to sing as it should from factory whilst remaining MOT and emissions compliant and significantly reducing weight.  This exhaust is designed to fit within the factory fitted exhaust outlets.  Test Results  Engine at Idle in Sport mode: 66.8dB (an increase of +9.6dB over standard)  Static 4,000rpm test: 100.9dB (an increase of +5.9dB over standard) Weight: 8.52kg (a decrease of -7.58kg over standard) All relevant fittings and gaskets are supplied. Please Note: This 'non-valved' exhaust removes the use of exhaust valves. Using a non-valved exhaust will not harm the running of your vehicle, you will simply not have exhaust sound options, however the Cobra Sport exhaust has been designed with this in mind. Media Sound and First Drive - BMW M240i (G42) Venom Rear Exhaust Static Sound Example - BMW M240i (G42) Venom Rear Exhaust

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

Introducing the Enhanced Edition LED H7 Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in ANY H7 Fitments and replaces the OEM lamp unit for an ultra bright replacement. This bulb can be used as a dipped & high beam upgrade as well as a foglight. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! No longer any need for clips & caps! The bulb is designed to fit in any H7 fixing without any adjustments or additional items, and utilising its 4 point technology, this can be orientated in either 2 or 4 location points to ensure the best output and zero polarity issues! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H7 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H7 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

  As part of our expanding BMW product range, AIRTEC Motorsport is proud to launch our wheel arch liner clearance grilles for the BMW G87 M2, G80 M3 and G82 M4 models. The IssueThe original BMW arch liners feature a vented section to allow air to escape from the front bumper. However, this section has very little clearance to the tyre when turning, which is acceptable for a standard car, but when modified with lowered suspension, larger tyres or even simple wheel spacers, it causes the tyre to make contact with the vented section and instantly damages it. The plastic fins can then break off and these can also damage the tyre. The SolutionSimple yet effective, our design team developed replacement grilles that can be fitted to the arch liner to provide the necessary extra clearance. Tested on a lowered car with larger tyres, these grilles still ensure large debris cannot pass through whilst allowing air to escape from the front bumper. Made from 2mm aluminium and finished in a high-quality black powder coat, the grilles feature our own hexagonal design that’s laser cut into the grille. The grilles attach to the arch liner with seven fixings each side to ensure they are rigid and the kit comes with all fixtures and fittings, as well as detailed installation instructions. Please note: Drilling and removal of the original vents is required in order to fit. Features:  Kit designed specifically for the G8x M model platform Made from 2mm aluminium with laser cut design Replaces the original BMW plastic grilles Tested on a lowered car with larger tyres Ensure debris cannot pass through and allowing air to escape Attach to the arch liner with seven fixings (drilling required) Long lasting, high-quality black powder coat finish Includes all fixtures and detailed fitting instructions Registered Design Right Number: Application Pending AIRTEC part no: ATMSBMW24  

Read more less

As part of our expanding BMW product range, AIRTEC Motorsport is proud to launch our direct replacement aluminium undertray for the BMW G87 M2, G80 M3 and G82 M4 models. The IssueThe original undertray on these cars is made from plastic and features a large opening to allow air to cool the engine’s oil cooler, which is mounted close to the floor. However, due to the oil cooler’s low-level placement and lack of protection from road debris that may flick up, it is left open and exposed to damage, which could cause imminent engine failure. The SolutionOur solution to creating a direct replacement undertray in aluminium began with a full 3D scan of the vehicle’s underside to ensure a perfect fitment that reuses all original mounting points. As a result, it requires no drilling or cutting and is completely reversible if required. It also retains the original BMW rubber bumper trim. The laser-cut mesh section ensures no substantial debris can damage the oil cooler and our design also features an additional venting in the stepped section to further improve air flow. Finished in a high-quality black powder coat finish, the undertray offers improved protection, durability and cooling effectiveness. Please note: The undertray uses existing mounting points – but it is essential the fixings you use to secure it are of good quality. The original BMW fittings should only be used if they’re in good condition. Worn, corroded or broken fixings should be replaced with new items from BMW, as failure to do so may cause the undertray to work loose. Features: · Direct replacement for original BMW G-series M car undertray · Created from 3D scan and CAD software for perfect fitment · Fine mesh protects the exposed low-level BMW oil cooler · Made from high-quality aluminium for increased strength · Uses original mounting points – no cutting or drilling required · Improved cooling ability due to larger venting · Comes in a durable black powder coat finish Registered Design Right number: Application Pending AIRTEC part no: ATMSBMW20

Read more less

As part of our expanding BMW product range, AIRTEC Motorsport is proud to launch our induction kit upgrade for the BMW G87 M2, G80 M3 and G82 M4 models, suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the original air intake system to allow more flow whilst maintaining low intake temperatures, therefore improving response, sound and aesthetics within the engine bay. Having previously designed a number of enclosed induction kits for other performance models, we were keen to develop an intake package for the G8x series to offer significant improvements over standard and compared to other kits on the market. We began with a 3D scan of the engine bay so we could use a CAD program to calculate the most efficient use of space with a perfect fitment. As a result, we chose to utilise the original BMW air box bases with enlarged, two-piece laser cut lids. This increases the capacity of the air boxes to allow the fitment of 80mm cone air filters whilst retaining the original front air feed that ensures a constant flow of fresh air is forced into the air box. The lids feature vents to encourage the flow of air by allowing it to pass by the filter and then exit. Our perfectionist design engineer team also ensured the two air box lids locate perfectly parallel to the strut brace for a balanced aesthetic within the engine bay. The right-hand intake pipe retains the original fittings but features an uninterrupted 80mm diameter throughout to ensure the least restriction all the way to the turbo, whilst the connectors are CNC-machined and allow the use of the original O-rings and tension clips. Using the original air box bases also allows the original rubber mountings to be retained, which reduces vibration. The result is increased power, improved throttle response, heightened induction noise and a more pleasing look to the engine bay. The kit is a direct replacement that requires no additional drilling or cutting to fit and comes complete with all the correct fixtures and fittings, as well as detailed installation instructions. Features:  Comprehensive kit designed specifically for the G8x platform Large cotton air filters for improved flow and increased performance Utilises original air box bases with enlarged two-piece laser cut lids Retains original front intake to direct constant feed of cold air to the filter Improved soundtrack and under bonnet aesthetics Long lasting, high quality black powder coat finish Includes all fixtures and detailed fitting instructions Registered Design Right number: Application Pending AIRTEC part no: ATIKBMW7

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped & high beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H8 or H11 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H8/11 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

For hydraulic brake and clutch systems. Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3) Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual. Min. dry boiling point 260°C. Min. wet boiling point 165°C Notice Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs. Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water.  DOT 4 Technical Info Contents 500 ml Colour Pale Amber Chemical basis Butoxyethanol Shelf life from production 36 Month Min. wet boiling point 165 °C Min. dry boiling point 260 °C Density 1.052 g/ml Density conditions at 20°C pH value 7-11

Read more less