Performance - BMW 3 Series F30 / F31 / F34 / F80 (2012-2019)

Dual Port / Vent to Atmosphere: TS-0223-1050 The Multiple Award-winning Kompact EM Series of Upgraded Diverter Valves are the world’s first truly plug-and-play Upgrade solution for your factory diverter valve. Unplug and unbolt your OEM Valve, and install a Kompact EM Valve in its place. No adaptors, hoses or extra assembly are required. The Kompact EM Valve Series from Turbosmart takes the motorsport-proven, billet valve technology and adds an onboard proprietary solenoid system and internal pressure control channels for a simple plug-and-play valve with full OE integration and control. There are no reference hoses, separate solenoids, or fiddly bits – Just bolt-on and plugin! You can count on unmatched performance and reliability as a direct replacement for your factory diverter valve. The Kompact EM Valves overcome the common faults associated with plastic factory valves through our Boost-Balance Valve Design (The more boost you have, the better it seals), Positive Seal O-Ring on the Piston’s face and Billet Construction. No matter your application, the Kompact EM Series will hold more boost and be more responsive in any environment. Available InDual Port / Vent to Atmosphere: TS-0223-1050Plumback / Recirculating: TS-0223-1250 Key FeaturesBoost-Balance Valve TechnologyPatented integrated pressure controlTrue plug-and-play upgradeIntegrated proprietary high-temperature solenoid valveBillet construction with high-temperature o-ringsFitment available in Plumback or Dual Port optionsUSA Patent: 10,781,745AUS Patent: 2018253619 Suitable for BMW vehicles with the N20 and N26 engines. This BOV can be used in both the pneumatic and the electronic-activated turbo. Please look up the vehicle application list for more details. FITMENT MAKE Model Variant HP Fuel Engine Year Range BMW 125i F20 218HP Petrol (2.0L N20 B20) 2013 - 2017 BMW 125i F20 (EWG) 218HP Petrol (2.0L N20 B20) 2012 BMW 125i F20 (PWG) 218HP Petrol (2.0L N20 B20) 2012 BMW 220i F22 184HP Petrol (2.0L N20 B20) 2013 - 2015 BMW 220i F23 184HP Petrol (2.0L N20 B20) 2014 - 2016 BMW 228i F22 184HP Petrol (2.0L N20 B20) 2014 - 2016 BMW 228i F22 245HP Petrol (2.0L N26 B20) 2014 - 2016 BMW 228i F23 245HP Petrol (2.0L N20 B20) 2014 - 2016 BMW 320i F30 184HP Petrol (2.0L N20 B20) 2013 - 2018 BMW 320i F30 (EWG) 184HP Petrol (2.0L N20 B20) 2012 BMW 320i F30 (PWG) 184HP Petrol (2.0L N20 B20) 2012 BMW 320i GT F31 184HP Petrol (2.0L N20 B20) 2012 - 2015 BMW 320i GT F34 184HP Petrol (2.0L N20 B20) 2013 - 2016 BMW 328i F30 245HP Petrol (2.0L N20 B20) 2013 - 2018 BMW 328i F30 245HP Petrol (2.0L N26 B20) 2013 - 2018 BMW 328i F30 (EWG) 245HP Petrol (2.0L N20 B20) 2012 BMW 328i F30 (EWG) 245HP Petrol (2.0L N26 B20) 2012 BMW 328i F30 (PWG) 245HP Petrol (2.0L N20 B20) 2011 - 2012 BMW 328i F30 (PWG) 245HP Petrol (2.0L N26 B20) 2011 - 2012 BMW 328i GT F31 245HP Petrol (2.0L N20 B20) 2012 - 2015 BMW 328i GT F31 245HP Petrol (2.0L N26 B20) 2012 - 2015 BMW 328i GT F34 245HP Petrol (2.0L N20 B20) 2013 - 2016 BMW 328i GT F34 245HP Petrol (2.0L N26 B20) 2013 - 2016 BMW 420i F32 184HP Petrol (2.0L N20 B20) 2013 - 2017 BMW 420i F33 184HP Petrol (2.0L N20 B20) 2014 - 2016 BMW 420i F36 184HP Petrol (2.0L N20 B20) 2014 - 2017 BMW 428i F32 245HP Petrol (2.0L N20 B20) 2013 - 2017 BMW 428i F32 245HP Petrol (2.0L N26 B20) 2013 - 2017 BMW 428i F33 245HP Petrol (2.0L N20 B20) 2013 - 2017 BMW 428i F33 245HP Petrol (2.0L N26 B20) 2013 - 2017 BMW 428i F36 245HP Petrol (2.0L N20 B20) 2014 - 2016 BMW 428i F36 245HP Petrol (2.0L N26 B20) 2014 - 2016 BMW 520i F10 184HP Petrol (2.0L N20 B20) 2013 - 2016 BMW 520i F10 (EWG) 184HP Petrol (2.0L N20 B20) 2012 BMW 520i F10 (PWG) 184HP Petrol (2.0L N20 B20) 2011 - 2012 BMW 528i F10 245HP Petrol (2.0L N20 B20) 2013 - 2016 BMW 528i F10 (EWG) 245HP Petrol (2.0L N20 B20) 2012 BMW 528i F10 (PWG) 245HP Petrol (2.0L N20 B20) 2011 - 2012 BMW X1 20i E84 184HP Petrol (2.0L N20 B20) 2013 - 2015 BMW X1 20i E84 (EWG) 184HP Petrol (2.0L N20 B20) 2012 BMW X1 20i E84 (PWG) 184HP Petrol (2.0L N20 B20) 2011 - 2012 BMW X1 28i E84 245HP Petrol (2.0L N20 B20) 2013 - 2015 BMW X1 28i E84 (EWG) 245HP Petrol (2.0L N20 B20) 2012 BMW X1 28i E84 (PWG) 245HP Petrol (2.0L N20 B20) 2011 - 2012 BMW X3 20i F25 184HP Petrol (2.0L N20 B20) 2013 - 2017 BMW X3 20i F25 (EWG) 184HP Petrol (2.0L N20 B20) 2012 BMW X3 20i F25 (PWG) 184HP Petrol (2.0L N20 B20) 2011 - 2012 BMW X3 28i F25 245HP Petrol (2.0L N20 B20) 2013 - 2017 BMW X3 28i F25 (EWG) 245HP Petrol (2.0L N20 B20) 2012 BMW X3 28i F25 (PWG) 245HP Petrol (2.0L N20 B20) 2012 BMW X4 20i F26 184HP Petrol (2.0L N20 B20) 2014 - 2018 BMW X5 40e F15 245HP Petrol (2.0L N20 B20) 2015 - 2018 BMW Z4 20i E89 184HP Petrol (2.0L N20 B20) 2013 - 2016 BMW Z4 20i E89 (EWG) 184HP Petrol (2.0L N20 B20) 2012 BMW Z4 20i E89 (PWG) 184HP Petrol (2.0L N20 B20) 2011 - 2012 BMW Z4 28i E89 245HP Petrol (2.0L N20 B20) 2013 - 2016 BMW Z4 28i E89 (EWG) 245HP Petrol (2.0L N20 B20) 2012 BMW Z4 28i E89 (PWG) 245HP Petrol (2.0L N20 B20) 2011 - 2012  

Read more less

This is a performance enhancing induction kit for the 2014+ BMW 328i N20/N26 EWG Features Improved throttle response Black powdercoated heat shield and inlet pipe Dyno results: max gains 12-14bhp (this may vary dependant on vehicle) Easy to maintain dry pleated filter Cold air straight to the turbo charger What Does It Do? This induction kit delivers increased air flow and induction noise over the standard restrictive air box. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black powdercoated heat shield Black powdercoated inlet pipe Red pleated filter Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2011-2013 BMW 3 Series (F30/F31/F34/F80) 2.0 (N20) 2012-2013 BMW 3 Series (F30/F31/F34/F80) 2.0 (N26)

Read more less

This is a performance enhancing turbo inlet kit for the BMW M2/M3/M4 Competition S55 3.0T engine. Features Improved throttle response Cold air straight to the turbo charger Improved turbo response Enlarged diameter on the silicone hose What Does It Do? This turbo inlet delivers increased air flow over the standard turbo inlets. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black silicone hoses Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2014-2018 BMW M3 (F30/F80) 3.0 (S55) 2016-2018 BMW M3 Competition (F30/F80) 3.0 (S55) 2014-2021 BMW M4 (F32/F82) 3.0 (S55) 2016-2021 BMW M4 Competition (F32/F82) 3.0 (S55) 2018-2021 BMW M2 Competition (F87) 3.0 (S55)

Read more less

   Developed at AIRTEC HQ in the UK, we’re proud to launch our revised chargecooler kit aimed at modified BMW M2 Competition/M3 & M4 models for track or fast road use. Our redesign now features the biggest core available on the market, ensuring it offers the best possible performance benefits and resistance to power-reducing heat soak. The dimensions of the core speak for themselves; boasting a huge 125.6% increase in volume over standard and 45.3% increase in frontal area over standard. Featuring cast aluminium, freer flowing end tanks with internal deflectors to help improve air flow distribution across the full width of the core, the kit utilises the original top mount location and therefore retains the original boost and coolant connectors. Finished in a high-quality black powder coat, the kit also comes with all fixtures and fittings required for installation, as well as detailed fitting instructions. Whilst these design features will benefit any standard or tuned example, these aspects become much more prominent in highly modified vehicles that require vastly improved cooling abilities in order to maintain charge temperatures and perform. Our chargecooler’s improved cooling efficiency and straightforward fitment makes it an essential modification for all modified BMW M cars fitted with the S55 engine. Dimensions:OEM Chargecooler                                     Width276mm Length136mm Depth76mm Volume                                                                                                                                              2.85 litres Frontal Area37cm² AIRTEC Motorsport Chargecooler                                     Width287mm Length190mm Depth118mm Volume                                                                                                                                              6.43 litres Frontal Area54cm² Fits: F87 M2 (Competition only) F80 M3 F82/3 M4 Please note: whilst this is a direct fit for the M3 and M4 models, the M2 Competition requires minor trimming to the metal on the underside of the bonnet to allow clearance, due to its significant size increase. Features: 125% increase in capacity compared to original 45% increase in frontal area compared to original High-flow, moulded one-piece cast end tanks Huge increase in cooling ability & reduced charge temperatures Connects to all OEM fittings and fixtures High-quality powder coated black finish All fittings and fixtures included Comes with detailed fitting guide AIRTEC part number: ATINTBMW6

Read more less

PRORAM induction kit for BMW 1/2/3 Series with the N20 engine Features Our performance synthetic nanofiber air filter, designed to optimise airflow. Offers proven performance gains – especially with a tuned vehicle.  Heat shield helps maintain low intake temperatures by providing a physical barrier between the air filter and the rest of the engine bay Includes all nuts bolts, hose clamps and high quality silicone hose connectors necessary to fit the kit to a standard car  Easy to clean using our filter maintance kit - CK-003 What Does It Do? This induction kit will increase the airflow into the turbo while increasing engine noise over the restrictive factory air intake system. This kit includes everything required for the fitting of the induction kit. What Will I Get? Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include: Black heat shield Black powder coated aluminium intake pipe Proram pleated filter Full fitting kit with easy step by step instructions including pictures Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2012-2020 BMW 1 Series (F20/F21/F40) 2.0 (N20) 2012-2021 BMW 2 Series (F22/F23/F44/F45/F46/F87) 2.0 (N20) 2011-2018 BMW 3 Series (F30/F31/F34/F80) 2.0 (N20) 2013-2017 BMW 4 Series (F32/F33/F36/F82/F83) 2.0 (N20)

Read more less

PRORAM induction kit for BMW M2 Competition, M3 & M4 (F87, F80, F82) Features Our performance synthetic nanofiber air filters designed to optimise airflow. Offers proven performance gains – especially with a tuned vehicle.  Heat shields helps maintain low intake temperatures by providing a physical barrier between the air filter and the rest of the engine bay Includes all nuts bolts, hose clamps and high quality silicone hose connectors necessary to fit the kit to the standard car  Easy to clean using our filter maintance kit - CK-003 What Does It Do? This induction kit will increase the airflow into the turbo while increasing engine noise over the restrictive factory air intake system. This kit includes everything required for the fitting of the induction kit. What Will I Get? Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include: Black heat shield Proram pleated filters Hard pipe and silicone pipe work Full fitting kit with easy step by step instructions including pictures Videos Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2014-2018 BMW M3 (F30/F80) 3.0 (S55) 2016-2018 BMW M3 Competition (F30/F80) 3.0 (S55) 2014-2021 BMW M4 (F32/F82) 3.0 (S55) 2016-2021 BMW M4 Competition (F32/F82) 3.0 (S55) 2018-2021 BMW M2 Competition (F87) 3.0 (S55)

Read more less

This performance intake kit is designed to fit BMW M2, 135i, 235i, 335i and 435i models from 2011 to 2018 with the N55 3.0L turbocharged petrol engines. Features 90mm intake diameter Matched OEM MAF sensor dimensions Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions Easy to clean using our filter maintance kit - CK-003 What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include: Black powder coated heat shield Carbon fibre lid Ramair foam filter Black silicone hose Black powder coated hard pipe CNC turbo adapter CNC PCV adapter Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2011-2015 BMW 3 Series (F30/F31/F34/F80) 3.0 (N55) 2013-2016 BMW 4 Series (F32/F33/F36/F82/F83) 3.0 (N55) 2011-2016 BMW 1 Series (F20/F21/F40) 3.0 (N55) 2013-2016 BMW 2 Series (F22/F23/F44/F45/F46/F87) 3.0 (N55) 2015-2018 BMW M2 (F22/F87) 3.0 (N55)

Read more less

This performance intake kit is designed to fit BMW 140i, 240i, 340i, 440i models from 2016 onwards with the B58 3.0L turbocharged petrol engines. Features 90mm intake diameter Matched OEM MAF sensor dimensions Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions Easy to clean using our filter maintance kit - CK-003 What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include: Black powder coated heat shield Carbon fibre lid Proram pleated air filter Black powder coated hard pipe Black silicone reducer Black silicone coupler Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: YEAR Make Model Engine 2015-2021 BMW 1 Series (F20/F21/F40) 3.0 (B58) 2013-2021 BMW 2 Series (F22/F23/F44/F45/F46/F87) 3.0 (B58) 2015-2019 BMW 3 Series (F30/F31/F34/F80) 3.0 (B58) 2016-2020 BMW 4 Series (F32/F33/F36/F82/F83) 3.0 (B58)

Read more less

This performance intake kit is designed to fit BMW 120i, 125i, 220i, 230i, 320i, 330i, 420i, 430i models from 2016 onwards with the B48 2.0L turbocharged petrol engines. Features 90mm intake diameter Matched OEM MAF sensor dimensions Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions Easy to clean using our filter maintance kit - CK-003 What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include: Black powder coated heat shield Carbon fibre lid Proram pleated filter Black powder coated hard pipe Black silicone couplers Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2015-2025 BMW 1 Series (F20/F21/F40) 2.0 (B48) 2013-2021 BMW 2 Series (F22/F23/F44/F45/F46/F87) 2.0 (B48) 2012-2025 BMW 3 Series (F30/F31/F34/F80) 2.0 (B48) 2013-2021 BMW 4 Series (F32/F33/F36/F82/F83) 2.0 (B48)

Read more less

This performance intake kit is designed to fit BMW 1&3 Series models from 2011 to 2022 with the N13-B16A 1.6L turbocharged petrol engines. Features 80mm intake diameter Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions Easy to clean using our filter maintance kit - CK-003 What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include: Black powder coated heat shield Ramair foam filter Black silicone coupler Black powder coated hard pipe CNC MAF housing Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2011-2019 BMW 1 Series (F20/F21/F40) 1.6 (N13-B16A) 2012-2016 BMW 3 Series (F30/F31/F34/F80) 1.6 (N13-B16A)

Read more less

Half System exhaust Non-resonated half system - Single Exit Twin Ø83mm Daytona trims. May not be compatible with models that have extra bracing at the rear. Non-resonated half system - Dual Exit Twin Ø90mm trims. Requires 340i rear diffuser (BMW 51192291414 or aftermarket copy). Does not fit AdBlue models. May not be compatible with models that have extra bracing at the rear. Good to know: Fitment Years: 2013 - 2020 Model: F30/F31 330D/335D, F32 430D/435D, Including xDrive Fits To: OEM Only Pipe Diameter: 76mm/3" From their beginnings in the 1930’s and now part of the VAG group Volkswagen have grown to be one of the world’s largest car manufacturers. Initially focusing on affordable family cars including the iconic Beetle all that changed in 1976 with the launch of the Golf/Rabbit Mk1 Gti one of the first hot hatches and a real game changer. Following on from the Gti’s immense success the early 2000’s saw the launch of the first of their high-performance R models the Golf 4 R32. It was only natural that one of the very first performance exhausts Scorpion produced was for the Gti back in the early nineties and they’ve continued to be one of our most popular models to date. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle.

Read more less

Want to tighten your grip on the road? Scorpion’s lightweight aluminium chassis braces tick all the boxes. The single-piece manufacturing process ensures a high-strength connection under load. Braces are powder-coated black and etched with the Scorpion mark.Our underbody bracing reduces performance loss due to chassis twist during hard braking or cornering. Enhanced body rigidity translates to a more direct feel with the road surface. (Fits both the Scorpion and OEM pipework.) SBM073B BMW F80 M3 BMW F82/83 M4

Read more less

Front Radius Arm F8x M Conversion Bush PFF5-4901BLK PFF5-4901BLK Front Radius Arm F8x M Conversion Bush has been designed to fit the original equipment "M" radius arms but accommodates the wider subframe fitted to non-M cars. This new bush option allows older arms with worn bushes to be repurposed, saving the cost of buying new BMW arms at around £150 to £200 each. Seen more as a track/motorsport upgrade, these parts are available exclusively through our Black Series and made in our Black 95A material, paired with stainless-steel inner sleeves and CNC-machined outer shells for strength and improved load distribution. The increase in caster provided by this conversion and the fitment of our bush allows for greater in-corner camber gain, with improved front-end grip and turn-in. This makes it an ideal upgrade for any tuned M'lite looking to head out on track, and it serves as great accompaniment for our PFF5-1902GBLK Camber Adjustable Bushes.   Vehicle Fitment:BMW F20, F21 RWD (2011 - 2019), BMW F22, F23 (2013 on), BMW F3* Sedan / Touring / GT, BMW F32, F33, F36 (2013 -)

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

When looking at the B58 engine within the M140i/240i/340i/440i engine bay it’s clear that BMW had left some room for modification within the inlet tract, the sound resonator and accordion ribs cause significant turbulence to the airflow causing a detriment to the engine’s potential performance. By removing these, and replacing it with five-ply silicone construction you gain a host of performance upgrades, including: Significant power gain of over 9bhp engine power and 7nm of torque. Improved induction noise. Multi ply silicone construction improves longevity of FMINLH25 over that of the OEM hose. 5 ply silicone construction will be able to handle strain of engine mapping far better than OEM hose. Fitting with no specialist tools in approximately half an hour.   Vehicle Fitment: BMW 1 Series F20/F21/F40 3/5 Dr Hatchback 2012 Onwards M140i 2016-2019 (B58) 2 Series F22/F23 2Dr Coupe/Convertible 2014 Onwards M240 2016-2021 (B58) 3 Series F30/F31 Saloon/Estate 2011-2019 340i 2015-2019 (B58) Testing was completed using Performance Remap in Gloucester with their VTEC 4 wheel drive dynamometer, This was to ensure all our data has been achieved with results as accurately as possible by an independent tuner. The results below speak for themselves, also with the added benefit of being a very easy component to fit with no specialist tools this is superb, affordable modification for the BMW enthusiast. From the dyno graph shown, performance gains can be expected from 4500RPM to the red line with +9BHP and +7NM of torque at peak RPM. Not only is FMINLH25 a functional improvement, but with it being available in black and red this product really helps to improve the aesthetics of the engine bay. One major difference of FMINLH25 is the diameter of the hose at the airbox end. Usually this is 85mm diameter, however FMINLH25 is 90mm diameter, and uses a silicone reducer sleeve so that it fits the OEM airbox correctly. This increase of 5mm diameter allows the inlet hose to be used with a wider variety of airbox/intake systems while also increasing the volume and de-restricting the flow of the OEM part,     This product is a direct fit for the OEM part 13718601682 (just the turbo inlet to airbox section). The hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments and will enhance any engine bay both technically and aesthetically. Lifetime warranty. Why not pair this with our Forge Motorsport replacement high flow panel filter (FMPAN-0172) if you are using the OEM airbox.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW 335i performance exhaust is made in 3"/76.2mm pipework and fits from the turbo to the centre exhaust to replace the standard catalyst. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sports catalyst version replaces a factory emissions device and is not EC homologated. This may not meet current emission laws for road use in your territory.  All relevant fittings and gaskets are supplied EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases.

Read more less

Fits: F30 (Saloon) M-Sport model (additional dual exit panel required). Does not fit AdBlue models, or models with rare additional strengthening beams or mounting point (please see final product image for reference). Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW 335D performance exhaust is made in 3"/76.2mm pipework and fits from the centre section backwards replacing the standard rear section with dual exit tailpipes. This performance exhaust is designed to fit 335D (F30 Saloon) vehicles with the M-Sport bodykit with the addition of the interchangeable dual exit 340i M-Sport lower rear panel which is available from the related items (Part No. RP02). This cosmetic performance exhaust upgrade is focused on improving the styling of the 335D. The exhaust has been designed to offer a subtle improvement in sound but stay at very similar sound levels to the original exhaust All relevant fittings and gaskets are supplied. Note - The original pipework will have to be cut to enable this exhaust to fit the vehicle. This product fits models equipped with factory fit tow bar.  Does not fit AdBlue models, or models with rare additional strengthening beams or mounting point (please see final product image for reference). Press Release For those seeking to achieve the more aggressive and sporty look of the 340i to the rear end of their 335D, Cobra Sport now offer a dual exit cosmetic exhaust upgrade which makes a bold statement. This exhaust system has been designed to fit neatly with the M-Sport rear bumper into which the 340i M-Sport dual exit lower rear panel (available separately) easily clips into place completely replacing the existing single side exit 335D lower rear panel. Once fitted, the new Cobra Sport 335D exhaust system and replacement 440i lower rear body panel look entirely at home on the car and gives the 335D a much sportier edge with the dual exit exhaust tailpipes. Matt Thomas, Cobra Sport’s Sales Manager says “We’ve seen a growing trend of people wanting to achieve the look of the more recognisable 340i’s dual exit exhaust on the more economical diesel model, our dual exit exhaust conversion allows them to achieve the look with this fantastic cosmetic upgrade. The 335D dual exit cosmetic exhaust upgrade has been specially designed to offer a slightly deeper exhaust tone overall but stays within 2dB of the original exhaust." The new dual exit exhaust for the 335D is finished with a choice of round 3.5” (88.9mm) highly polished T304 stainless steel tailpipes which further enhance the appearance the car and perfectly match the styling of the popular BMW M-Sport models. The 335D is known to respond well to tuning recording big power gains when matched with hardware upgrades. With the nealy fitted dual exit Cobra Exhaust combined with a stage 1 remap, the development car revealed impressive power figures of 340whp and 489lb-ft! which is a +26% and 15% increase over standard. Media Sound example of the BMW 335D Exhaust (Dual Exit Rear Exhaust) Sound example of the closely related BMW 435D Exhaust (Quad Exit Rear Exhaust)

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M340i performance exhaust is made in 3.5"/88.9mm pipework and fits from the turbo to the centre exhaust to replace the standard catalyst. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sports catalyst version replaces a factory emissions device and is not EC homologated. This may not meet current emission laws for road use in your territory.  All relevant fittings and gaskets are supplied EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases.

Read more less

Fits: F30 Saloon and F31 Tourer models (Inc. 2WD and X-Drive) 2011 - June 2015 Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW 320D performance exhaust is made in 2.25"/57.15mm pipework and fits from the centre section backwards replacing the standard rear section with dual exit tailpipes. This exhaust will only fit with the M-Sport rear bumper and 340i M-Sport lower rear panel which is available directly from the related items section (Part No. RP02). This cosmetic performance exhaust upgrade is focused on improving the styling of the 320D. The exhaust has been designed to offer a subtle improvement in sound but stay at very similar sound levels to the original exhaust. All relevant fittings and gaskets are supplied. Note - The original pipework will have to be cut to enable this exhaust to fit the vehicle. Does not fit AdBlue models. Press Release Cobra Sport have now added the BMW 320D to their ever popular range of dual exit conversions with the launch of a BMW 340i style dual exit conversion. For those seeking to achieve the more aggressive and sporty look of the 340i to the rear end of their 320D, Cobra Sport now offer a dual exit rear box cosmetic upgrade section which makes a bold statement. This exhaust has been designed to fit neatly with the M-Sport rear bumper and the 340i M-Sport lower rear panel (available separately). Once fitted, the new 320D exhaust system and replacement body panels look entirely at home on the car and gives the 320D a much sportier edge. This conversion which will fit the 2WD and X-Drive models, is the latest in our range of cosmetic upgrades for BMW models and is available as a direct fit rear box section. Matt Thomas, Cobra Sport’s Sales Manager says “We’ve seen a growing trend of people wanting to achieve the look of the more recognisable 340i’s dual exit exhaust on the more economical diesel model, our dual exit exhaust conversion allows them to achieve the look with this fantastic cosmetic upgrade. "The Cobra Sport system produces a slightly deeper exhaust tone than the O/E system but keeps sound levels very similar. During the 4,000rpm static test the levels remained the same at 78db and at idle the test recorded only a +2db increase registering 59db." The new dual exit exhaust for the 320D is finished with a choice of dual 3.5" (88.9mm) inward rolled baffled or inverted highly polished stainless steel tailpipes which further enhance the appearance the car and match the styling of the popular M-Sport models. Media Example of BMW 320D / 420D Sports Exhaust (Dual Exit Conversion)

Read more less

Fits: B47 Engine - F30 (Saloon), F31 (Touring) M-Sport models - includes quad exit rear panel. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW 320D performance exhaust is made in 2.5"/70mm pipework and fits from the centre section backwards replacing the standard rear section with dual exit tailpipes. This performance exhaust is designed to fit 320D Saloon and Touring vehicles with the M-Sport bodykit with the addition of the supplied interchangeable quad exit M3 Style lower rear panel. All relevant fittings and gaskets are supplied (quad exit panel included).  Note - The original pipework will have to be cut to enable this exhaust to fit the vehicle. Fits B47 LCI models only - does not fit AdBlue models

Read more less

Fits: F30 / F30 LCI (Saloon) & F31 / F31 LCI (Touring / Estate) M-Sport models (additional quad exit panel required). Save 30% on the matching rear diffuser panel when purchased together (see part code: RP01). Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW 330D performance exhaust is made in 3"/76.2mm pipework and fits from the centre section backwards replacing the standard rear section with dual exit tailpipes. This performance exhaust is designed to fit 330D Saloon and Touring vehicles with the M-Sport bodykit with the addition of the interchangeable quad exit M3 Style lower rear panel. Please see related products for the matching rear diffuser panel - save 30% on the panel (part code: RP01)when purchased with this exhaust (retail customers only). This cosmetic performance exhaust upgrade is focused on improving the styling of the 330D. The exhaust has been designed to offer a subtle improvement in sound but stay at very similar sound levels to the original exhaust. All relevant fittings and gaskets are supplied. Note - The original pipework will have to be cut to enable this exhaust to fit the vehicle. This product fits models equipped with factory fit tow bar.  Does not fit AdBlue models. Press Release Cobra Sport have added a quad exit performance exhaust to their ever popular range of style upgrades for the BMW 330D, with the launch of a BMW M3 style quad exit exhaust system. For those seeking to achieve a more aggressive and sporty look similar to that of the M3 to the rear of their 330D, Cobra Sport now offer a quad tip fully TIG welded stainless steel cosmetic exhaust upgrade which makes a bold statement. This exhaust system has been designed to fit the F30 Saloon and F31 Touring 330D models with the M-Sport bodykit with the addition of a quad exit M3 style lower rear panel (available separately). Once fitted, the new Cobra Sport 330D exhaust system and replacement body panel look entirely at home on the car giving a look which should have been created directly from the factory. The new Cobra Sport exhaust is ideal for those looking for a sportier more aggressive look to the high powered diesel models. Matt Thomas, Cobra Sport's Sales Manager says "We've seen a growing trend of people wanting to achieve the look of the more recognisable M4 quad exit exhaust on the more economical diesel 330D. Our quad exit exhaust conversion allows them to achieve the look with this fantastic cosmetic upgrade. The 330D cosmetic exhaust upgrade has been specially designed to offer a marginally deeper exhaust tone overall but stay within 2dB of the original exhaust." The new quad exit Cobra Sport exhaust for the330D is finished with a pair of specially designed twin 3” (76.2mm) highly polished T304 stainless steel slash cut tailpipes which further enhance the appearance the car and take inspiration from the styling of the popular BMW M3. Media Sound example of the closely related BMW 435D Exhaust (Quad Exit Rear Exhaust)

Read more less

Fits: F30 (Saloon) and F31 (Touring / Estate) M-Sport models (additional quad exit panel required). Save 30% on the matching rear diffuser panel when purchased together (see part code: RP01). Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW 335D performance exhaust is made in 3"/76.2mm pipework and fits from the centre section backwards replacing the standard rear section with dual exit tailpipes. This performance exhaust is designed to fit 335D Saloon and Touring vehicles with the M-Sport bodykit with the addition of the interchangeable quad exit M3 Style lower rear panel. Please see related products for the matching rear diffuser panel - save 30% on the panel (part code: RP01) when purchased with this exhaust (retail customers only). This cosmetic performance exhaust upgrade is focused on improving the styling of the 335D. The exhaust has been designed to offer a subtle improvement in sound but stay at very similar sound levels to the original exhaust. All relevant fittings and gaskets are supplied. This product fits models equipped with factory fit tow bar.  Note - The original pipework will have to be cut to enable this exhaust to fit the vehicle. Does not fit AdBlue models. Press Release Cobra Sport have added a quad exit performance exhaust to their ever popular range of style upgrades for the BMW 335D, with the launch of a BMW M3 inspired quad exit exhaust system. For those seeking to achieve a more aggressive and sporty look similar to that of the M4 to the rear of their 335D, Cobra Sport now offer a quad tip fully TIG welded stainless steel cosmetic exhaust upgrade which makes a bold statement. This exhaust system has been designed to fit the F30 Saloon and F31 Touring models with the M-Sport bodykit with the addition of a quad exit M4 style lower rear panel (available separately). Once fitted, the new Cobra Sport 335D exhaust system and replacement body panel look entirely at home on the car giving a look which should have been created directly from the factory. The new Cobra Sport exhaust is ideal for those looking for a sportier more aggressive look to the high powered diesel models. Matt Thomas, Cobra Sport’s Sales Manager says “We’ve seen a growing trend of people wanting to achieve the look of the more recognisable M4 quad exit exhaust on the more economical diesel 335D. Our quad exit exhaust conversion allows them to achieve the look with this fantastic cosmetic upgrade. The 335D cosmetic exhaust upgrade has been specially designed to offer a marginally deeper exhaust tone overall but stay within 2dB of the original exhaust." The new quad exit Cobra Sport exhaust for the 335D is finished with a pair of specially designed twin 3” (76.2mm) highly polished T304 stainless steel slash cut tailpipes which further enhance the appearance the car and take inspiration from the styling of the popular BMW M3. Media Sound example of the closely related BMW 435D Exhaust (Quad Exit Rear Exhaust)

Read more less

Fits: M-Sport models only (additional dual exit panel required). This Does not fit AdBlue models, or models with rare additional strengthening beams or mounting point (please see final product image for reference). Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW 330D performance exhaust is made in 3"/76.2mm pipework and fits from the centre section backwards replacing the standard rear section with dual exit tailpipes. This performance exhaust is designed to fit 2015 onwards 330D (F30 LCI Saloon) vehicles with the M-Sport bodykit with the addition of the interchangeable dual exit 340i M-Sport lower rear panel which is available directly from the related items section (Part No - RP02). This cosmetic performance exhaust upgrade is focused on improving the styling of the 330D. The exhaust has been designed to offer a subtle improvement in sound but stay at very similar sound levels to the original exhaust. All relevant fittings and gaskets are supplied. Note - The original pipework will have to be cut to enable this exhaust to fit the vehicle. This product fits models equipped with factory fit tow bar.  Does not fit AdBlue models, or models with rare additional strengthening beams or mounting point (please see final product image for reference). Does not fit AdBlue models. Press Release For those seeking to achieve the more aggressive and sporty look of the 340i to the rear end of their 330D, Cobra Sport now offer a dual exit cosmetic exhaust upgrade which makes a bold statement. This exhaust system has been designed to fit neatly with the M-Sport rear bumper into which the 340i M-Sport dual exit lower rear panel (available separately) easily clips into place completely replacing the existing single side exit 330D lower rear panel. Once fitted, the new Cobra Sport 330D exhaust system and replacement 440i lower rear body panel look entirely at home on the car and gives the 330D a much sportier edge with the dual exit exhaust tailpipes. Matt Thomas, Cobra Sport’s Sales Manager says “We’ve seen a growing trend of people wanting to achieve the look of the more recognisable 340i’s dual exit exhaust on the more economical diesel model, our dual exit exhaust conversion allows them to achieve the look with this fantastic cosmetic upgrade. The 330D dual exit cosmetic exhaust upgrade has been specially designed to offer a slightly deeper exhaust tone overall but stays within 2dB of the original exhaust." The new dual exit exhaust for the 330D is finished with a choice of round 3.5” (88.9mm) highly polished T304 stainless steel tailpipes which further enhance the appearance the car and perfectly match the styling of the popular BMW M-Sport models. Media Sound example of the closely related BMW 335D Exhaust (Dual Exit Rear Exhaust) Sound example of the closely related BMW 435D Exhaust (Quad Exit Rear Exhaust)

Read more less

Cobra Sport stainless steel BMW OE factory looking exhaust tips enhance the style of your vehicle giving you the ultimate driving experience. These original looking straight-cut 3.5" (88.9mm) exhaust tips have been specially designed as a direct replacement to fit F30/F31 335i equipped with the 3L N55 engine. The tips have a larger than the standard diameter of 3.5", offering an increase of 0.5"/12.7mm, substantially enhancing the looks of the existing BMW exhaust. The stock BMW tailpipes are prone to rust after a period of time, the premium materials used in these replacement tips eradicate these issues. These BMW M Performance style tips are supplied as a pair and are available in stainless steel or stealthy ceramic black, and offer a 15% increase in overall diameter over the stock tailpipes. The slip-on design make these replacement tailpipes quick and easy to install as they fit directly onto the O/E locator pins, and no modification is required, making them a direct replacement for BMW part: 18307610633. Please note: this item comes with a one year warranty.   Media

Read more less