Performance - BMW X3 G01 / F97 (2018-Present)

Custom Car Number Plate Keyring – Personalised Reg Plate Keyring for Car Enthusiasts Add a personal touch to your keys with our Custom Number Plate Keyring, designed to replicate your actual car registration plate. Whether you're a proud car owner, collector, or just love a bit of custom flair, this keyring is the perfect accessory to show off your pride and joy. ✅ Customisable with your exact number plate✅ Durable Dual Layer 6mm acrylic construction✅ Colour Customisable for maximum visibility✅ Ideal gift for car lovers, new drivers or clubs✅ Lightweight yet strong – built to last Why choose our number plate keyring? Each keyring is made to order using high-quality materials that ensure long-lasting colour and detail. It’s lightweight enough for everyday use, yet tough enough to handle daily wear and tear. The miniature plate design mirrors UK registration plates, giving it a premium and authentic look. Choose whatever colour Face plate and back plate you want to give you a truly customised look. Perfect for: Personal use Gifts for new car owners Car club merchandise Show & shine accessories  

Read more less

Description This is a performance enhancing induction kit for the 2018+ BMW X3 X4 2.0T B48 engine. Features Improved throttle response Black powdercoated heat shield and inlet pipe Dyno results: max gains 12-14bhp (this may vary dependant on vehicle) Easy to maintain dry pleated filter Cold air straight to the turbo charger What Does It Do? This induction kit delivers increased air flow and induction noise over the standard restrictive air box. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black powdercoated heat shield Black powdercoated inlet pipe Red pleated filter Silicone joiner Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2018-2024 BMW X4 (G02/F98) 2.0 (B48) 2017-2024 BMW X3 (F97/G01) 2.0 (B48)

Read more less

P3 V3 OBD2 Gauge Basic Features Plug and Play Install - plugs directly into your OBD2 port (Want to keep your OBD2 port open? The P3 hard-wire harness kit also available) OEM Integration - installs in your vent for a sleek install while retaining air flow Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analogue boost sensor Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units) Boost (via OBD2 port using OEM sensors or P3 analogue boost sensor) Coolant temperature Air/Fuel ratio (AFR or Lambda) Vehicle speed (can be calibrated in 1% increments from -9% to +20%) Intake air temperature Air 1 (intake air temp at MAF) A ir 2 (intake air temp after intercooler) Throttle angle Ignition timing Engine RPM Exhaust gas temperature Battery voltage Programmable shift light analogue input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor analogue input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor Acceleration timers (0-60mph/0-100mph/60-130mph) Braking timers (60-0mph/100-0mph) Optional Add-Ons P3 analogue Boost sensor - plugs directly into gauge harness, no wiring required) Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port

Read more less

Spoiler CAP 3D BMW X3 M F97 / F97 Facelift FITS:BMW X3 M F97 Facelift 2021 - 2024BMW X3 M F97 2017 - 2021 COMPLETE SET CONTAINS:-> Spoiler Extension + 3M Tape-> Degreasing Cloth-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.

Read more less

Rear Side Splitters V.2 BMW X3 M F97 / F97 Facelift FITS:BMW X3 M F97 Facelift 2021 - 2024BMW X3 M F97 2017 - 2021** Fits only with: BM-X3M-F97F-RS1G+RS1RG ** COMPLETE SET CONTAINS:-> Rear Side Splitters (Left + Right)-> Fitting kit-> Fitting manualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

Read more less

Rear Side Splitters V.1 BMW X3 M F97 / F97 Facelift FITS:BMW X3 M F97 Facelift 2021 - 2024BMW X3 M F97 2017 - 2021 COMPLETE SET CONTAINS:-> Rear Side Splitters (Left + Right)-> Fitting kit-> Fitting manualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

Read more less

  Front Splitter BMW X3 M F97 FITS:BMW X3 M F97 2017 - 2021 COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.  

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:70mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:76mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:83mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:90mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This filter is designed to be fitted to the outside of a rigid pipe such as a MAF sensor housing. These filters have an rubber polymer neck and a cone shaped filter element. This enables easy fitting to space-restricted engine compartments, whilst providing a large surface to maximise potential air flow. The filters are constructed using stainless steel cage internal and our famous 15mm thick twin layer foam.  Ramair universal filters are designed and manufactured for a very diverse range of applications and are made here in the UK. They are available in many different sizes and styles available.  Clean using our filter maintenance kit - CK-003 This product has the following dimensions: Filter Internal Neck Diameter: You choose Filter Neck Length: 23mm Filter Overall Height: 130mm Filter Base Width: 150mm Filter Top Width: 93mm Filter Material: 15mm Dual Layer Foam

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This filter is designed to be inserted into a flexible hose such as a rubber or silicone intake pipe. These filters have an aluminium ram-pipe neck and a cone shaped filter element. This integral cone channels all the incoming air, towards the inlet manifold, and in doing so, reduces unnecessary turbulence. These filters are also cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of pleated surface area an added boost of power to your engine too! These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of motorsport filtration the pleated range by Ramair is the premium choice on the market today for your fast road or track car. With its large size, technologically advanced filter and bell mouth alloy spun base this filter kit is capable of handling extremely large power & flow rates. Filter Outer Neck Diameter: Select Your Option Filter Neck Length: 45mm (1.8inch) Filter Overall Length: 185mm (7.3inch) Filter Base Width: 150mm (5.9inch) Filter Top Width: 120mm (4.7inch) Filter Material: Pleated Nanofibre Filter Base Material: Aluminium Filter Base Finish: Black Powder Coat

Read more less

This is a replacement panel filter for the BMW 5/7/8 Series 2018+. For full list of fitments see compatibility chart. Features High Performance, MAF Safe, twin layer, fully reticulated foam Fits in the OEM Airbox and replaces inefficient paper filter Easy to clean using our filter maintenance kit - CK-003 Stainless steel cage support structure Guaranteed surface area using high quality custom blended polymer What Does It Do? The Ramair Panel Filter range is made from twin core Ramair Aeriform foam and our stainless steel cage which is used in many of our tier 1 Motorsport applications for maximum strength. A rubber polymer surround gives a fantastic clean and smooth finish with longevity in mind. These filters are direct replacements for the OEM air filter in your car, making this filter easy to fit and maintain. Ramair twin core foam is unique and like no other in the market. Our foam is designed to give maximum dust filtration along with optimum performance. Filter Length: 272mm (10.7inch) Filter Width: 220mm (8.7inch) Filter Shape: Unique Filter Material: Dual Layer Foam Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2016-2025 BMW 5 Series (G30/G31/F90) 2.0 (B47) 2017-2025 BMW 5 Series (G30/G31/F90) 2.0 (B48) 2016-2025 BMW 5 Series (G30/G31/F90) 3.0 (B57) 2016-2025 BMW 5 Series (G30/G31/F90) 2.0 (B46) 2016-2025 BMW 5 Series (G30/G31/F90) 3.0 (B58) 2018-2025 BMW 6 Series (G32) 2.0 (B47) 2017-2025 BMW 6 Series (G32) 3.0 (B57) 2017-2025 BMW 6 Series (G32) 2.0 (B48) 2019-2025 BMW 6 Series (G32) 3.0 (B48) 2017-2025 BMW 6 Series (G32) 3.0 (B58) 2016-2019 BMW 7 Series (G11/G12) 2.0 (B47) 2015-2022 BMW 7 Series (G11/G12) 3.0 (B47) 2015-2022 BMW 7 Series (G11/G12) 2.0 (B48) 2015-2020 BMW 7 Series (G11/G12) 3.0 (B57) 2015-2023 BMW 7 Series (G11/G12) 3.0 (B58) 2018-2025 BMW 8 Series (G14/G15/G16) 3.0 (B57) 2019-2025 BMW 8 Series (G14/G15/G16) 3.0 (B58) 2019-2025 BMW 8 Series (F91/F92/93) 3.0 (B58) 2018-2025 BMW X3 (F97/G01) 2.0 (B47) 2017-2025 BMW X3 (F97/G01) 2.0 (B48) 2017-2025 BMW X3 (F97/G01) 3.0 (B57) 2017-2025 BMW X3 (F97/G01) 3.0 (B58) 2019-2022 BMW X3 (F97/G01) 2.0 (B46) 2018-2025 BMW X4 (G02/F98) 2.0 (B47) 2021-2025 BMW X4 (G02/F98) 2.0 (B46) 2018-2025 BMW X4 (G02/F98) 2.0 (B48) 2018-2025 BMW X4 (G02/F98) 3.0 (B57) 2021-2025 BMW X4 (G02/F98) 3.0 (B58) 2019-2023 BMW X5 (G05/F95) 2.0 (B47) 2018-2025 BMW X5 (G05/F95) 3.0 (B57) 2019-2025 BMW X5 (G05/F95) 2.0 (B48) 2020-2025 BMW X6 (G06/F96) 3.0 (B57) 2019-2025 BMW X6 (G06/F96) 2.0 (B48) 2020-2025 BMW X6 (G06/F96) 3.0 (B58) 2019-2025 BMW X7 (G07) 3.0 (B57) 2020-2025 BMW X7 (G07) 3.0 (B58)

Read more less

Description This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. Fitment Years: 2022 - 2024 Model: X3 M LCI including Competition G01 LCI Fits To: OEM / Scorpion Pipe Diameter: 70mm/2.75" Downpipes with a high flow sports catalysts Replaces OE catalysts with high flow sports catalysts De-cat Downpipes Removes OE Catalyst Scorpion's meticulous attention to detail and superior engineering skills put them at the very top in terms of construction quality and reliability. But the real difference is the way a Scorpion feels. No other exhaust feels like a Scorpion because no other exhaust is created with our passion and that's one thing which can never be copied. Scorpion's hand built systems not only give you real exclusivity, but added value too. We don't just charge what we feel the market will stand for a premium grade exhaust; when you upgrade to Scorpion you are paying for quality R&D, the finest hand selected materials, extensive testing and for the skill of an automotive engineer. You really are getting more bang for your buck.    Features: - Lifetime warranty - Hand made in the UK - Acoustically developed sound - Made from T304 grade stainless steel Whats Included: Link Pipe Axle Pipe 100mm Daytona Tips Rear Silencer Fitting Kit Front Section After its launch in the 1950’s the Fiat 500 was produced for almost 20 years going on to become an iconic model. When the decision was taken to relaunch the model in 2007 50 years after the first it was natural that Abarth a name synonymous with Fiat and performance would be involved producing their own 500/595/695 variants.  To compliment these Scorpion have developed a cat-back 63.5mm/2.5”, non-resonated system with a choice of 100mm Carbon Ascari, polished Daytona or black ceramic coated Daytona tailpipes. The cat back system not only enhances performance it gives a deeper sportier tone than the original. In addition, for the models with the Garret turbo fitted there is the option of a 76mm/3” de-cat downpipe for those wanting to further tune their 1.4 turbo Abarth’s. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SFT005 Product Type Cat-Back Resonated Non-resonated Fitment Years 2008 - 2018 Fits To OEM / Scorpion Model Fitment 500/595 Abarth 1.4 (IHI Turbo) / 595/695 Abarth 1.4 (Garrett Turbo) Pipe Diameter 63.5mm/2.5" * Tailpipe Daytona Tailpipe Diameter 100mm Shipping Dimensions 90cm x 78cm x 26cm Notes IHI Turbo only

Read more less

Description This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. Fitment Years: 2022 - 2024 Model: X3 M LCI including Competition G01 LCI Fits To: OEM / Scorpion Pipe Diameter: 70mm/2.75" Single Mid Pipe (Removes GPF) Removes OE GPF and Front Crossover Pipe GPF Delete Removes OE GPF Front Crossover Pipe Replaces Front Crossover Pipe. Not needed if fitting Scorpion Single Mid-Pipe Scorpion's meticulous attention to detail and superior engineering skills put them at the very top in terms of construction quality and reliability. But the real difference is the way a Scorpion feels. No other exhaust feels like a Scorpion because no other exhaust is created with our passion and that's one thing which can never be copied. Scorpion's hand built systems not only give you real exclusivity, but added value too. We don't just charge what we feel the market will stand for a premium grade exhaust; when you upgrade to Scorpion you are paying for quality R&D, the finest hand selected materials, extensive testing and for the skill of an automotive engineer. You really are getting more bang for your buck.    Features: - Lifetime warranty - Hand made in the UK - Acoustically developed sound - Made from T304 grade stainless steel Whats Included: Link Pipe Axle Pipe 100mm Daytona Tips Rear Silencer Fitting Kit Front Section After its launch in the 1950’s the Fiat 500 was produced for almost 20 years going on to become an iconic model. When the decision was taken to relaunch the model in 2007 50 years after the first it was natural that Abarth a name synonymous with Fiat and performance would be involved producing their own 500/595/695 variants.  To compliment these Scorpion have developed a cat-back 63.5mm/2.5”, non-resonated system with a choice of 100mm Carbon Ascari, polished Daytona or black ceramic coated Daytona tailpipes. The cat back system not only enhances performance it gives a deeper sportier tone than the original. In addition, for the models with the Garret turbo fitted there is the option of a 76mm/3” de-cat downpipe for those wanting to further tune their 1.4 turbo Abarth’s. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SFT005 Product Type Cat-Back Resonated Non-resonated Fitment Years 2008 - 2018 Fits To OEM / Scorpion Model Fitment 500/595 Abarth 1.4 (IHI Turbo) / 595/695 Abarth 1.4 (Garrett Turbo) Pipe Diameter 63.5mm/2.5" * Tailpipe Daytona Tailpipe Diameter 100mm Shipping Dimensions 90cm x 78cm x 26cm Notes IHI Turbo only

Read more less

Description Fitment Years: 2022 - 2024 Model: X3 M LCI including Competition G01 LCI Fits To: OEM / Scorpion Pipe Diameter: 70mm/2.75" HALF SYSTEM - WITH VALVES Scorpion's meticulous attention to detail and superior engineering skills put them at the very top in terms of construction quality and reliability. But the real difference is the way a Scorpion feels. No other exhaust feels like a Scorpion because no other exhaust is created with our passion and that's one thing which can never be copied. Scorpion's hand built systems not only give you real exclusivity, but added value too. We don't just charge what we feel the market will stand for a premium grade exhaust; when you upgrade to Scorpion you are paying for quality R&D, the finest hand selected materials, extensive testing and for the skill of an automotive engineer. You really are getting more bang for your buck.    Features: - Lifetime warranty - Hand made in the UK - Acoustically developed sound - Made from T304 grade stainless steel Whats Included: Link Pipe Axle Pipe 100mm Daytona Tips Rear Silencer Fitting Kit Front Section After its launch in the 1950’s the Fiat 500 was produced for almost 20 years going on to become an iconic model. When the decision was taken to relaunch the model in 2007 50 years after the first it was natural that Abarth a name synonymous with Fiat and performance would be involved producing their own 500/595/695 variants.  To compliment these Scorpion have developed a cat-back 63.5mm/2.5”, non-resonated system with a choice of 100mm Carbon Ascari, polished Daytona or black ceramic coated Daytona tailpipes. The cat back system not only enhances performance it gives a deeper sportier tone than the original. In addition, for the models with the Garret turbo fitted there is the option of a 76mm/3” de-cat downpipe for those wanting to further tune their 1.4 turbo Abarth’s. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SFT005 Product Type Cat-Back Resonated Non-resonated Fitment Years 2008 - 2018 Fits To OEM / Scorpion Model Fitment 500/595 Abarth 1.4 (IHI Turbo) / 595/695 Abarth 1.4 (Garrett Turbo) Pipe Diameter 63.5mm/2.5" * Tailpipe Daytona Tailpipe Diameter 100mm Shipping Dimensions 90cm x 78cm x 26cm Notes IHI Turbo only

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

Custom 4D Number Plate Tags – Pair | Fully Legal | Any Colour & Logo Add a bold, custom touch to your UK number plates with our CEUK 4D Number Plate Tags – fully road legal and made to match or enhance your 4D plates. These are not just stickers – they’re premium, 3mm acrylic tags with a raised 4D effect, available in any colour and logo combination you choose. Designed to stick to the left side of your number plate using weatherproof backing tape, these tags offer a fully customisable and stylish upgrade that complies with UK number plate regulations. ✅ Key Features: Sold as a Pair – includes 2x matching tags 100% Road Legal – 50mm wide to comply with DVLA size regulations Fully Customisable:• Choose tag colour• Choose logo/emblem• Choose logo orientation• Choose logo colour Weatherproof & Durable – designed to last in UK conditions Easy Fit – pre-applied adhesive for quick install 🛠️ Size Options: Option 1 – Standard Plates (No Frame): • H 110mm x W 50mm x T 3mm• Designed to fully cover the corner of any number plate without a frame Option 2 – Plates with Surround Frame: • H 100mm x W 47mm x T 3mm• Slightly smaller to fit inside plate frames (may leave a small border) 💡 Note: Fit may vary slightly due to universal design. See product images for visual examples. Looking for something completely custom? Contact us at support@ceuk.org and our in-house design team will be happy to help you create a truly unique tag!

Read more less

Custom 4D Number Plate Tags – Fully Legal Acrylic Pair | Multiple Colours & Logos Take your number plate styling to the next level with CEUK’s Custom 4D Number Plate Tags – designed to perfectly complement 4D number plates, but also compatible with any standard UK number plate. Crafted from 3mm premium acrylic, these tags are 100% road legal at just 50mm wide, and adhere easily to the left-hand side of your plate using pre-applied, weatherproof adhesive backing. Sold as a pair (2 tags), each set is fully customisable to match your build’s style. 🎨 Customisation Options: Choose your tag colour Choose your logo or emblem Choose the logo orientation Choose the logo colour 📏 Size Options: Option 1 – For Plates Without Frames: • H 110mm x W 50mm x T 3mm• Designed to fully cover the plate’s left edge — ideal for plates fitted directly to the car. Option 2 – For Plates With Surround/Holder: • H 100mm x W 47mm x T 3mm• Slightly smaller to fit cleanly within most number plate holders (see sizing disclaimer below). ✅ Key Features: Sold as a pair (2 tags included) Legal under UK number plate regulations Premium laser-cut acrylic (3mm thick) Weatherproof adhesive – pre-applied for easy install Designed and made in the UK by CEUK Perfect for adding personal or branded touches to your plate setup ⚠️ Disclaimer: Full-size tag (Option 1) is universal and may slightly overlap corners depending on plate shape — designed to fully cover edge areas. Smaller tag (Option 2) may leave a 1–2mm border between the tag and frame depending on your holder’s dimensions. 📩 Want Something Completely Custom? No problem — just email support@ceuk.org, and our design team will help bring your idea to life.

Read more less

Enhanced Edition H7 Mini LED Bulbs – Ultra Compact, 6000Lm Output (6000K Ice White) All the power of our popular V3 LED Bulb – in a compact, low-profile design.Introducing the Enhanced Edition H7 Mini, designed to deliver exceptional brightness and clarity while eliminating the bulk of traditional LED upgrades. This is the perfect solution for tight-fit housings or vehicles with limited rear clearance. Ideal for dipped beam, high beam, or fog light applications, the H7 Mini fits any vehicle using a standard H7 fitting – no adapters, clips, or caps required. 💡 Why Choose the H7 Mini? Massive 6000Lm per bulb output – crisp 6000K Ice White Micro-sized cooling fan built into the shaft – no bulky heat sink Zero polarity issues – 4-point design works in multiple orientations Plug & Play Installation – fits directly into H7 sockets with no mods Compatible with projector and reflector housings ⚙️ Technical Specs: Voltage: 12V Wattage: 28W LED Chip: 3570 Colour Temperature: 6000K (Ice White) Lumen Output: 6000Lm per bulb Fitment: H7 (replaces OEM halogen) 📦 What's in the Box: 2x H7 Mini Enhanced Edition LED Bulbs Default colour: 6000K Ice White Supplied with 12-month CEUK warranty (keep packaging if longer warranty is stated) ⚠️ Vehicle Fitment Note: While this bulb fits all standard H7 sockets, spec-level variants (e.g. Ford ST, VW GTI) may use different housings. Please confirm bulb type before ordering by checking your existing unit. Installing LEDs may trigger a dashboard bulb error on some vehicles. This is harmless and explained in our FAQs.

Read more less

Enhanced Edition H8/H11 Mini LED Bulbs – Ultra Bright, Compact Fit (6000K Ice White, 6000Lm) All the power of our V3 LED bulb – in a sleek, compact design.Introducing the CEUK Enhanced Edition H8/H11 Mini LED Bulbs, engineered for maximum output and perfect fitment in tight headlight or fog light housings. These bulbs deliver a massive 6000Lm per bulb and feature a compact heat management system – ideal for modern vehicles where space is limited. Compatible with H8 and H11 fitments, these bulbs are perfect for fog lights, dipped beams, or high beam upgrades, delivering clear, crisp 6000K Ice White light with superior reliability. 💡 Key Features: 6000Lm Output Per Bulb – 6x brighter than most OEM halogens Ultra-Compact Design – mini cooling fan built into the shaft, no bulky heat sink Plug & Play Fitment – no adapters, clips, or caps needed 12V, 28W Power Efficiency Zero Polarity Issues – works in any orientation Suitable for Projector & Reflector Housings Safe for OEM Components – no CANBUS interference on most vehicles ⚙️ Technical Specs: Voltage: 12V Wattage: 28W LED Chip: 3570 Colour Temperature: 6000K Ice White Lumen Output: 6000Lm per bulb Fitment: H8 / H11 📦 What’s in the Box: 2x H8/H11 Enhanced Edition LED Bulbs (6000K Ice White) CEUK 12-Month Warranty (retain packaging if warranty is extended) ⚠️ Fitment Note: Always double-check your vehicle's bulb type – special editions (e.g., Ford ST, VW GTI) may differ from standard specs. Some vehicles may display a dashboard error message when LEDs are installed – this is harmless and addressed in our FAQs.

Read more less

  Side Skirts Diffusers BMW X3 M F97 / F97 Facelift FITS:BMW X3 M F97 Facelift 2021 - 2024BMW X3 M F97 2017 - 2021** The side skirt diffusers do not have holes for the Carpet Light (lighting under the skirts). You can make the holes yourself, but this may cause light refraction ** COMPLETE SET CONTAINS:-> Side Skirt Diffusers (Left + Right)-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black  CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

Read more less