Performance - Fiat & Abarth 500 / 595 / 695 (2007-Present)

Lower IAT'sConsistent IAT'sMaximises airflow Perfect fit for FMINDF500OEM+ aestheticLifetime warrantyVehicle Fitment: Fiat-500-595        145BHP        Competizione 180BHP        Trofeo 160BHP        Turismo 165BHP -695        XSR Yamaha Limited Edition 165BHP       Rivale 180BHP To assist with the cold air feed to the scuttle on the Abarth 500/595/695 we developed an inlet duct which after testing in the crucible of motorsport, was found to keep a more consistent and lower IAT. With our Abarth induction kit (FMINDF500) also utilising the direct cold air feed to the scuttle panel, we knew that these race proven gains could provide a valuable addition to our ever-popular FMINDF500 Abarth 500/595/695 induction kit. Race Proven, Daily Driven isn’t just the Forge Motorsport mantra, but it’s also the way we look to develop our products. Our technical partnership with Mini Challenge has allowed us to test our Abarth 500/595/695 components within a highly competitive motorsport series and helps us to highlight areas to develop on other products. The Mini Challenge JCW class use a homologated Forge Motorsport intake, which utilises the cold air feed from the scuttle panel to maximise the density charge of air entering the turbo intake. FMINLD3 was developed specifically for RHD applications. Whilst it is compatible with the LHD scuttle panel, there is minimal functional benefit when fitted to LHD vehicles, due to a blank located directly beneath the designated mounting area. We are currently exploring the possibility of a template for quick and easy modification to the LHD scuttle, which would allow airflow to be channeled towards the induction inlet more effectively. If proven feasible, this template will be made available retrospectively to LHD owners. After valuable iterations of design, we settled for a solution that perfectly follows the contours of the scuttle panel to ensure a snug fit to capture as much cold air as possible. 3D-scanning, SolidWorks 3D CAD, and 3D printing gave us the ability to test the differences between width, height and fitment of the inlet duct to finish up with the perfect design to suit FMINDF500. By capturing the washer jet inside the inlet duct it allows for a much wider design to maximise airflow, and helps with installation. We have spared no expense as per usual with the manufacture of this design, by having billet injection mould tooling created to produce a part with an OEM+ aesthetic. By testing samples against the OEM scuttle panel, we have been able to match the mottled plastic finish so well that you would mistake it for being a factory component! The finishing touch was the gloss finish to the Forge Motorsport logo, making our world-renowned name stand out just enough to really compliment your tastefully modified Abarth. 

Read more less

Highlights: Increased performance (8bhp)Guaranteed for lifeComplete kit and instructions for ease of installationHand fabricated aluminium pipingAesthetically pleasing designPerfect with our inlet duct (FMINLD3)   fits:•    500•    595  - 145BHP  - Competizione 180BHP  - Trofeo 160BHP  -  Turismo 165BHP•    695  -  XSR Yamaha Limited Edition 165BHP  -  Rivale 180BHP The cold air feed is drawn in from the scuttle panel, this maximises the density charge of air entering the turbo intake. A perfect upgrade to compliment this is our Abarth specific inlet duct, FMINLD3. This combination of temperature and density gave us an 8bhp increase on our test cars as well as an incredible induction noise. It will put a smile on your face not only when you feel the power gains, but also when you open the bonnet and see this beautiful product sat in your engine bay. Our intakes/induction kits are a great and effective upgrade to your vehicle. This intake comes with a carbon fibre housing. To ensure we deliver the best quality products we can, and following the extensive design and development of our intake range, we enlist the services of one the world’s leading carbon fibre manufacturers, who’s products range from F1 aero, carbon fibre car bodies, and aircraft wings! Our intakes maximise the density charge of cold air for increased performance, as well as give a great sound, and enhance the aesthetics of your engine bay. When it comes to the filtration part of the intakes, there is no point creating such an efficient system for it then to be restricted by the OEM hose and filter. Therefore, for the filters, we engage one of our partners and experts in filtration control, Pipercross or RamAir! Additional parts such as aluminium piping are hand fabricated and polished, and the hoses are fluorosilicone for maximum longevity. This kit for the Fiat 500/595/695 comes with everything you need for the installation. It uses a high flow filter, available in either a foam (FMPK371) or pleated option (FMINDF500RCP). The aluminium components are skilfully hand fabricated in our UK headquarters. 

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Note - This product is designed without a silencer and will be loud. This Abarth 500 performance exhaust is made in 2"/50.8mm pipework and fits from the centre section backwards (axle back) replacing just the rear section. Fits all Abarth 500/595/695 models including IHI and Garrett Turbo variants. Venom Race Rear Axle Back Test Results: Sound - Engine at Idle: 73.6dB (+11.2dB) - Static 4,000rpm test: 92.5dB (+9.3dB) Weight - 5.13kg (-8.41kg) This sports exhaust is part of the Cobra Sport Venom range and is extremely loud - sold for off road use only. All relevant fittings and gaskets are supplied. Press Release The Abarth 500 range takes the hot hatchback formula and dials up the fun factor with an exciting fizzy 1.4L T-Jet turbocharged engine, despite lacking power compared to its rivals, is full of character.  Whilst the engine is playful and bound to put a smile on the face of the driver, the factory exhaust system is muted and dilutes the driving experience. Cobra Sport has added attitude to the little Abarth, by replacing the rear section with the innovative axle back Venom system, this feisty pocket rocket is allowed to sing as it should from factory whilst remaining MOT emissions compliant and benefits from a weight saving of over 8.4kg. Delivering a bold increase in sound of +11.2dB at idle and an impressive +9.3dB at 4000 revs, the Cobra Sport system produces audible emotional every time you step on the throttle, giving Turin's scorpion the Cobra Sport venomous bite. The styling of the Abarth's pocket rocket has been enhanced, with a choice of 4” (101.6mm) stainless-steel, ceramic black and carbon fibre tailpipes. Like all Cobra Sport exhausts, this Abarth 500 performance exhaust is TIG-welded from high-quality T304 stainless steel and the mandrel-bent pipework has been developed in 2in (50.8mm) pipework, allowing for a smoother rate of gas flow for improved power delivery and a noticeably enhanced exhaust tone. Media Static Sound Example - Abarth 595 Venom Rear Axle Back Performance Exhuast

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Note - This product is designed without a silencer and will be loud. This Abarth 595 performance exhaust is made in 2"/50.8mm pipework and fits from the centre section backwards (axle back) replacing just the rear section. Fits all Abarth 500/595/695 models including IHI and Garrett Turbo variants. Venom Race Rear Axle Back Test Results: Sound - Engine at Idle: 73.6dB (+11.2dB) - Static 4,000rpm test: 92.5dB (+9.3dB) Weight - 5.13kg (-8.41kg) This sports exhaust is part of the Cobra Sport Venom range and is extremely loud - sold for off road use only. All relevant fittings and gaskets are supplied. Press Release The Abarth 500 range takes the hot hatchback formula and dials up the fun factor with an exciting fizzy 1.4L T-Jet turbocharged engine, despite lacking power compared to its rivals, is full of character.  Whilst the engine is playful and bound to put a smile on the face of the driver, the factory exhaust system is muted and dilutes the driving experience. Cobra Sport has added attitude to the little Abarth, by replacing the rear section with the innovative axle back Venom system, this feisty pocket rocket is allowed to sing as it should from factory whilst remaining MOT emissions compliant and benefits from a weight saving of over 8.4kg. Delivering a bold increase in sound of +11.2dB at idle and an impressive +9.3dB at 4000 revs, the Cobra Sport system produces audible emotional every time you step on the throttle, giving Turin's scorpion the Cobra Sport venomous bite. The styling of the Abarth's pocket rocket has been enhanced, with a choice of 4” (101.6mm) stainless-steel, ceramic black and carbon fibre tailpipes. Like all Cobra Sport exhausts, this Abarth 500 performance exhaust is TIG-welded from high-quality T304 stainless steel and the mandrel-bent pipework has been developed in 2in (50.8mm) pipework, allowing for a smoother rate of gas flow for improved power delivery and a noticeably enhanced exhaust tone. Media Static Sound Example - Abarth 595 Venom Rear Axle Back Performance Exhuast

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Note - This product is designed without a silencer and will be loud. This Abarth 695 performance exhaust is made in 2"/50.8mm pipework and fits from the centre section backwards (axle back) replacing just the rear section. Fits all Abarth 500/595/695 models including IHI and Garrett Turbo variants. Venom Race Rear Axle Back Test Results: Sound - Engine at Idle: 73.6dB (+11.2dB) - Static 4,000rpm test: 92.5dB (+9.3dB) Weight - 5.13kg (-8.41kg) This sports exhaust is part of the Cobra Sport Venom range and is extremely loud - sold for off road use only. All relevant fittings and gaskets are supplied. Press Release The Abarth 500 range takes the hot hatchback formula and dials up the fun factor with an exciting fizzy 1.4L T-Jet turbocharged engine, despite lacking power compared to its rivals, is full of character.  Whilst the engine is playful and bound to put a smile on the face of the driver, the factory exhaust system is muted and dilutes the driving experience. Cobra Sport has added attitude to the little Abarth, by replacing the rear section with the innovative axle back Venom system, this feisty pocket rocket is allowed to sing as it should from factory whilst remaining MOT emissions compliant and benefits from a weight saving of over 8.4kg. Delivering a bold increase in sound of +11.2dB at idle and an impressive +9.3dB at 4000 revs, the Cobra Sport system produces audible emotional every time you step on the throttle, giving Turin's scorpion the Cobra Sport venomous bite. The styling of the Abarth's pocket rocket has been enhanced, with a choice of 4” (101.6mm) stainless-steel, ceramic black and carbon fibre tailpipes. Like all Cobra Sport exhausts, this Abarth 500 performance exhaust is TIG-welded from high-quality T304 stainless steel and the mandrel-bent pipework has been developed in 2in (50.8mm) pipework, allowing for a smoother rate of gas flow for improved power delivery and a noticeably enhanced exhaust tone. Media Static Sound Example - Abarth 595 Venom Rear Axle Back Performance Exhuast

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

Introducing the Enhanced Edition LED H7 Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in ANY H7 Fitments and replaces the OEM lamp unit for an ultra bright replacement. This bulb can be used as a dipped & high beam upgrade as well as a foglight. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! No longer any need for clips & caps! The bulb is designed to fit in any H7 fixing without any adjustments or additional items, and utilising its 4 point technology, this can be orientated in either 2 or 4 location points to ensure the best output and zero polarity issues! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H7 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H7 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped & high beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H8 or H11 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H8/11 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

For hydraulic brake and clutch systems. Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3) Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual. Min. dry boiling point 260°C. Min. wet boiling point 165°C Notice Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs. Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water.  DOT 4 Technical Info Contents 500 ml Colour Pale Amber Chemical basis Butoxyethanol Shelf life from production 36 Month Min. wet boiling point 165 °C Min. dry boiling point 260 °C Density 1.052 g/ml Density conditions at 20°C pH value 7-11

Read more less

PFC13-14 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 13-14mm --- PFC15-16 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 15-16mm --- PFC17-18 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 17-18mm --- PFC19-20 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 19-20mm --- PFC21-22 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 21-22mm --- PFC23-24 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 23-24mm --- PFC25-27 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 25-27mm --- PFC28-30 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 28-30mm --- PFC31-33 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 31-33mm

Read more less

Fits: 500 - Abarth  Models: 2008 - Present 6 Line set   Why should I change my brake lines to Braided Stainless Steel ones? Better brake pedal feel - firmer under pressure More efficient braking - the PTFE lined, Stainless steel brake lines will not expand under load unlike OEM rubber hoses Long lasting - PVC outer and stainless steel end fittings will outlast the standard Mild Steel and rubber lines many times Available in many outer colour options to compliment your vehicle Rigorously tested and approved to the FMVSS 106 certification standards

Read more less

Here we introduce to you our #Enhanced Edition H1 LED Upgrade. This product can NOT be used as a cornering light! Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. Unlike other suppliers, CEUK has developed an LED bulb which does not require the splicing of wires and difficult intricate clips to hold the lamp in place. This unit fits in its entirety as an OEM H1 Halogen bulb would. The LED's come as standard 6000K ice white,  Its worth noting that due to the design of headlamps, different lamps and light units may give different results to those found in our pictures. Good to know. High Lumen Output Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 20,000 (10,000 Per Bulb) What's in the box 2x H1 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Pro Hoses silicone induction hose for Fiat 500 / 595 Abarth. All silicone hoses from Pro Hoses are manufactured to the highest of specifications using the best quality materials and workmanship to ensure we meet and exceed OEM specifications. Made by Pro-Hoses. Gloss Black, Race Red, Performance Blue normally kept in stock. Part no: PH/INDFT1

Read more less

Pro Hoses silicone coolant hose kit for Fiat 500 / 595 Abarth. All silicone hoses from Pro Hoses are manufactured to the highest of specifications using the best quality materials and workmanship to ensure we meet and exceed OEM specifications. Made by Pro-Hoses. Part no: PH/COLFT1

Read more less

Developed in-house at AIRTEC HQ in the UK, this induction kit is specifically designed to suit the 1.4-litre turbocharged 500 & 595. It comes complete with an AIRTEC branded foam air filter, laser cut AIRTEC scoop to direct air flow from the scuttle area, an alloy induction pipe, complete with air-flow sensor mounting and a high-quality Pro Hoses silicone connecting hose, available in a range of colours to suit your engine bay. The kit is a direct replacement that requires no additional drilling or cutting to fit. Features: Large foam air filter for improved flow and increased performance Alloy scoop that directs cold air to the filter Long lasting, high quality black powder coat finish Pro Hoses silicone joiner in a variety of colours Direct fit and comes with bolts, a bracket and all fixings, including jubilee clips Fits with the Pro Hoses induction hose. Registered Design Right number: AIRTEC part no: ATIKFT1

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb V3 This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Will fit in any vehicle which takes a H8 or H11 fitting provided you have about 1 inch of space behind the bulb! Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H8/11 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.   

Read more less

Description Here we introduce to you our #Enhanced Edition H7 LED V3 Upgrade. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Its worth noting that due to the design of the bulb, The driver / Heat fade is built into the back of the bulb and may not fit into all headlamp types. If you have any concerns please contact us at support@ceuk.org Please note - Some vehicles may require an LED clip of some sort to fit this item, message us direct if you want to clarify if your vehicle requires these.  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H7 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints LED clip not included - If required Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Part of our IllumiNite range - an ultra bright white halogen replacement for your fog and cornering bulbs. 35W - 6500K Ice White Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering.

Read more less

The All new Enhanced Edition sequential indicator unit from CEUK for the Fiat 500 / 595 A fine complement for our LED front and rear indicator offerings  Simple plug and play unit, installed by simply removing the OEM bulb and lense and replacing with our full replacement Unit! Amber sequential strobing that is completely canbus friendly!  Once your indicator ignites, the led strip built into the housing strobes from left to right giving a sequential look to it! Superior quality to overseas counterparts E Marked Fitment: 2007-2021 Fiat 500 / 595 Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.    

Read more less

Here we have our Bespoke dress up kits, One of the things that we are most famous for! Why do people spend thousands on making their engine bay look magical, but not replace the grubby rusty screws that come with your car from factory? That is a question we frequently ask, and we have the solution! We supply Anodized washers, complete with a stainless steel screw, to replace your existing ones and make your car really "Pop". The benefits are, Basically:- Your screws will never rust- You can select any colour you want!- It looks the bomb! This kit is for a Universal set of screws and washers in M6 fitment PLEASE ENSURE YOUR SCREWS ARE M6 BEFORE ORDERING! Contents: 10x Washer - 10x Stainless Steel Screw (M6)Locations: Headlights, Headlight Cover, Slam Panel etc You've seen these on eBay for £7, So why buy from us you ask...Well, The ones on eBay come with Cheaply made screws and washers, Our washers are made from a premium grade aluminium and anodized to last, and all our bolts are made from stainless steel!Our products are specific to your motor, And our replacement screws are direct stainless steel replicas of the factory screw. Meaning when they arrive, you fit them! No messing about, and no disappointment. Ad-Hoc screws and washers can be ordered, Please contact us for details!

Read more less

Description Here we introduce to you our #Enhanced Edition H7 LED V2 Upgrade. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white,  Its worth noting that due to the design of the bulb, The driver / Heat fade is built into the back of the bulb and may not fit into all headlamp types. If you have any concerns please contact us at support@ceuk.org Please note - Some vehicles may require an LED clip of some sort to fit this item, message us direct if you want to clarify if your vehicle requires these. These are sold separately.   Good to know. High Lumen Output Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 20,000 (10,000 Per Bulb) What's in the box 2x H7 LED Units (6000k Default) LED clip not included - If required Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

This product is for Full Kits with a MK7 Number Plate product option, where the customer can choose this item as part of their kit!

Read more less

Provided a performance increase +17.6hp & 31.2nm on our test car Carefully crafted using state of the art 3D CAD and CFD modelling Black coating improves heat dissipation properties Replacement for the original ‘twin intercooler’ setup Fully TIG welded for maximum strength and durability   MVT technology designed by Direnza offers greater intercooler efficiency in comparison to other aftermarket alternatives. This is achieved through the use of carefully placed vanes in the end tank which evenly distribute air across the entire core. Ensuring the full surface area of the intercooler core is optimised to cool your charged air, resulting in more power.   Test car: Abarth 595 Competizione 184.6hp /279.7nmPut through its paces on a state-of-the-art Maha MSR 500 Dyno, our Multi Vane Technology Intercooler for the Abarth 500 produced some highly impressive results. After installing our revolutionary MVT Intercooler, engine performance improved significantly. With the Abarth now producing 202.2hp & 310.9nm of torque, that’s an increase of +17.6hp & 31.2nm of torque! What’s more impressive is the cooling power of MVT. Using sophisticated data logging software, we measured stock intake temperatures at 44°c. With MVT, intake temperatures dropped by more than 38% down to 27°c. As a result, providing huge tuning potential and greater reliability when combined with a remap & supporting modifications. The perfect addition to any track or modified road car! We also went one step further by placing temperature probes into the inlet and outlet of the Intercooler. This allows us to accurately compare the difference in temperatures as the charged air passes though the core. Data for the stock intercooler showed us charged air temperatures dropped from 209.4°c(inlet) to 63.8°c(outlet). However, this figure was reduced down to 29.3°c(outlet) that’s a 54% drop thanks to the efficiency of our MVT Intercooler. Providing an overall temperature drop of 180.1°c.  Fitment Fiat 500 + 595 1.4 Abarth 2008-2018 models Please note – This item is only suitable for models with the IHI turbocharger Product Category Intercooler / Radiator Part Number DZIC037 Intercooler / Radiator - Core Height (mm) 220 Intercooler / Radiator - Core Length (mm) 495 Intercooler / Radiator - Core Width (mm) 52 Intercooler / Radiator - Inlet Size (mm) 51 Intercooler / Radiator - Outlet Size (mm) 51 Intercooler / Radiator - Overall Height (mm) 265

Read more less