Performance - Ford Fiesta MK6 (2002-2008)

AIRTEC’s new 70mm Intercooelr for the Mk6 Fiesta is a real winner, finally after 2 designs the intercooler is now awesome! really the only words to describe how well it works. Please note. Due to the Intercooler being 70mm thick it will mean reworking (cutting) of the lower radiator cradle and trimming of the grill each side behind the bumper, it does retain all the centre grill clips for a factory look once refitted. Perfect for your Turbo’d or Supercharged ST150 & an ideal Intercooler for custom TDCI diesel upgrade (extra parts required to fit). Available in Pro-Series Black. Please note: if upgrading your Jamsport Intercooler please contact them for new required AIRTEC pipe work (not currently available direct from us). To safe guard your cars engine you may require the JS map to be adjusted due to the AIRTEC intercooler flowing more air which has seen increased boost pressure, an adjustment to the map will make sure you have enough fuel for the extra Boost. Approximate Dimensions: Width 864mm Height 170mm Thickness 70mm AIRTEC part no: ATINTFO40

Read more less

AIRTEC front mount intercooler upgrade for the Mk6 Fiesta 1.6 diesel TDCi Designed to fit all 1.6 diesel models. PLEASE NOTE: This intercooler kit will require trimming to the bumper and radiator cradle Featuring a 60mm core design together with high-flow cast end tanks, the AIRTEC intercooler offers much greater surface area, efficiency and volume over standard. Despite this improvement, it fits behind the original bumper but does require trimming and cutting to fit! The comprehensive fitting kit includes all the correct fixtures and fittings, step-by-step instructions with pictures and should take approximately 2.5 hours to complete. The intercooler is available in Pro-Series Black finish and with or without the AIRTEC logo. Features: Designed and manufactured in the UK by AIRTEC AIRTEC logo’d cast end tanks for improved airflow and unbeatable strength Proven reduction in charge temps 3-year unlimited mileage warranty Available in Pro-Series Black finish AIRTEC logo available at no extra charge Unbeatable value for money! Hose colour shown for illustraion purposes only AIRTEC part no: ATINTFO45

Read more less

Designed at AIRTEC Motorsport, we developed this breather kit package to suit modified Fiesta ST150 models after finding our own supercharged demo car would often show signs of excessive oil residue pushed through the breather pipes, cam cover and crank case breather during fast road and track use. This would in-turn cause residue and vapour build up as well as smoke as the excess oil was diverted back into the intake and ultimately into the engine’s inlet. We have also seen similar traits in naturally aspirated examples with uprated camshafts or even remaps. Our kit is based around an oil breather tank that is designed to separate the oil from the vapour where it would usually be diverted back into the intake. The tank then collects the oil and features a level indicator, which once full can be easily emptied by removing the drain located at the bottom. The kit also includes an inlet manifold blank off pipe (as you will not need the  to breathe back into the inlet manifold anymore), as well as two specially made Pro Hoses silicone lines, a mesh filter and all fixtures and fittings, including jubilee clips.  This kit is designed to fit with the original PCV set up but can be adapted to fit with our AIRTEC Motorsport billet PCV baffle plate (or other aftermarket PCV plates) with an additional hose and fitting – please get in contact with your specific requirements. The tanks are available in silver, black or polished finishes – please choose from options. Features:  Kit designed specifically for the Fiesta ST150 model Helps the engine breathe better and reduce oil residue build up AIRTEC Motorsport oil breather tank with oil level indicator High quality Pro Hoses silicone lines, specific for this model Tanks available 3 finishes and hoses available in 3 colours All fixtures and fittings included in the comprehensive kit Fitting takes approximately 20-30 minutes AIRTEC part no: ATMSFO58

Read more less

This is perfect for everyday use and the odd trackday, close to standard driving experience without the excessive engine movement. This part will fit the Fiesta 1.0 EcoBoost, ST180, ST200 & Fiesta ST150   The Yellow bush insert is perfect for everyday use and the odd trackday, close to standard driving experience without the excessive engine movement.   The Purple Bush insert is aimed @ track and race, not recommended for everyday use as the bush is close to solid and will increase cabin noise (not that bad actually) but massivley reduces engine movement for faster gear changes   New Black Series Bush insert Ultimate performance motorsport track and race bushes offering the most precise and accurate driving experience. This bush is nearly 100% solid and is only aimed at the most hard-core track day or serious hard fast road use.   Features 2 x Polyurethane bush inserts CNC from solid billet alloy, bead blasted and anodised in satin Black Reduces engine movement and wheel hop on hard acceleration A must for modified cars Replaces original ford cast alloy and rubber torque mount Faster gear changes due to less engine movement Can be fitted in under 30 minutes with no special tools required   This is why we choose Power Flex The company operates in a self-contained state of the art factory, manufacturing everything in-house. The stainless steel components are machined on the latest computer controlled equipment to ensure perfect repeatability and quality. The moulding and tooling, design and manufacturing is carried out within the factory ensuring very rapid response time to special projects and complete communication between development, prototyping, testing and manufacturing departments. Component manufacturing is carried out with the latest automatic processing equipment ensuring 100% right first time quality. Testing of new components is carried out both on the vehicle and on test rigs.Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

AP Racing Formula DOT 5.1 Road / Competition Clutch & Brake Fluid. Formula DOT 5.1 is a premium specification Motor Vehicle Brake and Clutch Fluid which conforms to and exceeds the current international specifications U.S. FMVSS No 116, DOT 3, DOT 4, and DOT 5.1, S.A.E. J1703, SAE J1704 and ISO4925. - Suitable for High Performance Road Applications including vehicles fitted with ABS and ESP. - Superior -40°C (-40°F) viscosity makes it suitable for vehicles operating in cold climates. - AP Racing Formula DOT 5.1 is non silicone based. - AP Racing Formula DOT 5.1 fluid will mix safely with other DOT 5.1 fluids along with DOT 3 and DOT 4 Fluids conforming to the above specifications. - Family Part No. - CP4510-20 (20 Bottles).- Typical™ New Dry Boiling Point - 275°C (527°F)- Wet™ E.R. (Equilibrium Reflux) Boiling Point - 184°C (363°F)

Read more less

The original and still our most popular high performance brake fluid. Ate TYP200 (and its cousin Super Blue) offer extremely high boiling points in a full liter container at an attractive price. Even though it's rated as a DOT4 fluid, the boiling points of Ate Type 200 exceeds DOT5 specs. Ate brake fluid makes an excellent street/track dual purpose brake fluid.Ate TYP200 is an amber/gold colour to meet DOT regulations. It is identical in every way to Ate Super Blue, which was removed from shelves because the blue dye was not DOT compliant. PLEASE NOTE: We can only ship this product within Mainland UK. This item or subsequently any orders with this item on from outside mainland UK will be cancelled and refunded. 

Read more less

Large round washer stopper with washer logo Has double ‘O’ ring securing systemTo fit Mk2 Focus, Mk6/7 Fiesta.To fit, remove old washer cap and simply push new polished washer stopper in place.Please note these are made from cnc billet alloy and polished to a mirror finish.

Read more less

Power steering cap cover with Power steering logo Perfectly cnc'd with cog type profile inside for the perfect fit, then polished to a mirror finish To fit Mk4, Mk5, Mk6, Mk7, Mk8 Fiesta, Mk1/2 Focus and Mondeo mk2 puma Now made in Aluminium.

Read more less

ST150 Mirror finish stainless steel Camshaft cover, cover with optional AS logoDoes your ST have an aftermarket Airfilter fitted? Original ford camcover is now revealed and it isn’t the best looking is it? well our new Bolt on design camcover, cover will sort that out!Easy bolt on Design, will finish off your Camshaft cover a treat!Fits All Fiesta ST150 with standard Airbox removed for aftermarket Airfilter

Read more less

WHY CHOOSE THE K-BRACE?   > The main role of bracing is to increase rigidity and stability of a vehicle by preventing body roll, therefore improving grip, steering feedback and response. The K-Brace is an adaption of a strut/tower brace, but provides the same solution with significant enhancements. HEIGHTENED PERFORMANCE  > With the 4 fixing points and making use of a triangulation design, the K-brace is able to produce an undoubted amount of support in comparison to that from a singular bar strut brace. UNIQUE DESIGN > Car Manufacturers often use additional strengthening supports to the strut mountings of a standard vehicle. Therefore, by utilising those supports, in conjunction with the design of the K-Brace we are able to reduce the structural flex of the body or chassis especially during cornering. INNOVATIVE SOLUTIONS > The K-Brace will always be mounted in the most optimum position in your vehicle, while taking into consideration usability of the standard car. Rear folding seats remain fully functional, while boot space is optimised without compromising performance. TAILORED PREFERENCE > The industrial standard powder coating we provide is second to none. With 6 colours to choose from we are giving you the option to choose your alternative.  MK6 FIESTA K-Brace can be installed using the Fitting aid Provided. Fits ALL MK6 Fiesta Available in Black-White-Grey-Red-Blue-Yellow or Unpainted International delivery available  21 Working Day lead time Quality guaranteed.   Please note;  REQUIRES MODIFICATIONS TO THE PLASTIC TRIM . THE BRACE WILL LOOK TOO BIG FOR THE CAR UNTIL CARPET HAS BEEN TRIMMED OR REMOVED. THERE ARE 2 13MM HOLES TO BE DRILLED TO ALLOW FOR RIV-NUTS TO BE INSTALLED USING THE TOOL SUPPLIED.

Read more less

NOW WITH WATERPROOF CONNECTORS & IMPROVED DESIGN Description Please ensure you select the correct size, this is calculated as external diameter! We were the first, And ours are damn sure the best! Here we have our RGB halos that are controlled via an app on your mobile phone. The app works on both Android and iOS, and you can use the phone to control the halos in a variety of functions, including but not limited to: - over 140 colours (any colour on the spectrum) - halos dancing to your music - 20 pre set functions (7 colour flash etc) - change colour to your voice The halos are powered direct to your battery via live and earth and use very minimal power, so can be left on when car is switched off and you can walk away. (During tests at ford fair, we left the halos on from 07:30 until 17:00 with the car switched off, the battery had dropped only 1 volt, which recovered soon after starting) The light output on these halos is surreal, with the beam spreading across the floor about 6 feet. Easy to control, and such a marvel to look at.. truly adds visual value to any vehicle. The halos come wired up ready to be fitted and should take max 1 hour We know they fit the following Mk7 pre face fiesta Mk7.5 facelift fiesta (Zetec, Titanium and ST are a direct fit for 70mm, howeverthe Zetec S/ St Line will require 60mm size halo)Mk2 focus RS Mk3 pre facelift focus And any other car with a 70mm round fog light Features Halo Diameter - 70MM 12v Powered Controlled Via Mobile phone app 144 Different Colours 20 Pre set flashing options Fuse protected wiring loom included Whats in the Packet 1x RGB Bluetooth Receiver Box 2x RGB Halo Rings - 70mm/ 60mm 2x Strips Clear Gel adhesive Tape 1x Roll Electrical Tape 2x Alcohol surface wipes Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Please note these are sold in singles and not pairs12SMD interior panel lights This is an SMD unit that can be used in the following places: -Interior Welcome light (front and back) -Boot Lights -Footwells These are brighter than any bulb on the market today. With 12 SMD they will be difficult to beat in terms of brightness and also the fact that the SMD are all directional giving you light where you need it and not dispersing it around, and you will never have to worry about struggling to find your things in the dark again! These are ULTRA bright (in true CEUK style) Choose from Red, Blue, Green, white and now Purple! and enhance the interior of your car in seconds! choose which adapter suits yourself, plug them in and place the panel where required! They also have a sticky back for places like footwells. Measurements are 30x20mm These will also go anywhere else you desire as long as they fit. Price is for one panel only Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

239 Festoon Number Plate Bulb Upgrade A nice and quick replacement bulb for your yellow OEM ones. Make your number plate gleam with this super affordable upgrade 6000K white with 12 SMD you will not be disappointed We also do Red (Please note any other colour than white is illegal on UK Roads, we recommend red for show use only) 500,000+ hours estimate lifespan Price is per pair Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

239 Interior Bulb Add the finishing touches to your interior with these ambient bulbs. In a lovely colour these can totally change the way the inside of your car looks at night Ultra Bright 16smd youll never struggle to find anything again! Please note: Price is per ONE bulb, if you require multiple you will be required to order multiple at checkout 500,000+ estimate hours life Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

382 Reverse Light Upgrade - 8000K White Greatly improve your view when reversing with this remarkably bright bulbs A super bright bulb to lighten up the darkest of alley ways Price is for ONE bulb - please order multi if you need them. Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

501 Boot Bulb Struggle to see in your boot at night? Then this is the bulb for you. This will transform your boot totally, allowing you to actually see when you go searching for that dropped screw! We can also supply boot bulbs in: -Red -Blue -Green -Purple Price is for ONE bulb, so if you have more than one in your boot you will need to purchase as many as you require 500,000+ estimated life Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

6500K White 501 Side light upgrades (Also know as T10 W5W) These are a direct replacement for OEM bulbs, and will transform your car With 10SMD and a whopping 500,000+ hours of life you will not be disappointed These bulbs also project light forward, giving you extra vision on them dark winter nights We also do Red & Blue (Please note any other colour than white is illegal on UK Roads, we recommend red & Blue for show use only) Price is for a Pair Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

955 Reverse Light Bulb Upgrade These are a direct replacement to your factory fitted 955 bulbs 10 SMD, with an 8000K crisp white colour and a hint of blue at certain angles These bulbs have a projector lense on the front, which allows for an actual beam from your reverse lights, enabling you to see when you are reverse in dark spaces If you are looking for superior light output we would recommend our Enhanced Edition version 500,000+ hours estimate lifespan Price is for a pair Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

This is an SMD unit that replaces both the bulb and the lense in your number plate. These are brighter than any bulb on the market today. Not only that, they are a sealed unit. LED's have a tendency to fail when wet and constant punishment from shutting your boot, however these units will never have that issue. They're are made from plastic and rubber silicone meaning that when you slam the your boot, the silicone takes all the vibration and no damage is done to the unit Please note, these are only a proven fit on the MK6 Fiesta (Fits both Facelife and Pre Facelift) Price is per pair Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

The track-tested Motion is a versatile, strong and lightweight alloy wheel. The cross-wire spoke design echoes modern motorsport traditions and oozes speed and style. This wheel is cross drilled in some fitments. Size: 7.0 x 17" PCD:  4x108 Offset (ET): 40 Centre Bore: 73.10

Read more less

The Neo wheel from Calibre is a strong 10 spoke design. The Neo comes in a Black Matt finish. The spokes reach from the centre to the edge of the rim, which gives the wheel the impression of a much bigger wheel when added to your vehicle. Specs: Colour: Matt Black PCD: 4x108 Diameter: 17 inch Offset: 35 Contact us about wheel and tyre packages  

Read more less

The Calibre Pace is a simple yet stylish entry level 5-spoke alloy wheel design ideal for a wide range of passenger cars. Colour: Silver Size:7.0 x 17" PCD:4x108 Offset (ET):40 Centre Bore:73.10    

Read more less

The Suzuka is a classic, lightweight motorsport-inspired design and is one of our top sellers. Available in gloss black or gun metal  Size: 7.5 x 17" PCD: 4x108 Offset (ET): 35 Centre Bore: 73.10  

Read more less