CLEARANCE ITEM- ITEMS ARE NONE RETURNABLE AND HAVE NO WARRANTY. PLEASE SEE PICTURES AS THESE ITEMS BOTH HAVE SMALL DEFECTS ON THEM.
Ford Performance logo in Red and White as seen in the pictures!
Number plate surround with Ford Performance logo can be used for front or rear of vehicle - Sold as a Pair so one for each!
Add a distinctive look to your Ford with Ford Performance licence plate holders for your vehicle registration plates.
Best quality guaranteed!
The price is for ONE PAIR of spacers - if you wish to do all 4 spacers, you need to order QTY x2
The Wheel Spacers Detailed Below Also fits the following Vehicles:
Manufacturer
Vehicle
Model
Year
FORD
B-MAX
B-MAX (JK)
10.12 -
FORD
B-MAX
B-MAX VAN (JK)
10.12 -
FORD
ECOSPORT
08.12 -
FORD
FIESTA
MK5
08.95 - 09.02
FORD
FIESTA
MK6
11.01 - 03.10
FORD
FIESTA
MK7
06.08 - 2017
FORD
FIESTA
MK8
2017-2024
FORD
FOCUS
MK1
10.98 - 12.07
FORD
FUSION
FUSION (JU)
08.02 - 12.12
FORD
KA
KA (RB_)
09.96 - 11.08
FORD
KA
KA VAN (RB_)
09.96 - 11.08
FORD
MONDEO
MONDEO II (BAP)
08.96 - 09.00
FORD
MONDEO
MONDEO II STUFENHECK (BFP) / MONDEO II SALOON (BFP)
08.96 - 09.00
FORD
MONDEO
MONDEO II TURNIER (BNP) / MONDEO II STATION WAGON (BNP)
08.96 - 09.00
FORD
PUMA
PUMA (EC_)
03.97 - 06.02
FORD
STREETKA
STREET KA (RL2)
03.03 - 07.05
The Table Below Shows Each Spacer Size & System:
Spacer Width
Total Car Widening
System Number
5mm
10mm
5
10mm
20mm
6
15mm
30mm
6
15mm
30mm
4
20mm
40mm
6
20mm
40mm
4
25mm
50mm
4
30mm
60mm
4
Lowering Specs:
Lowering or lifting (+..) front (approx.)
Lowering or lifting (+..) rear (approx.)
30mm
30mm
This spring kit fits the following vehicles:
Manufacturer
Vehicle
Model
Year
Axle-Load front
Axle-Load rear
FORD
FIESTA VII (CB1, CCN)
1.4 TDCi, 1.5 TDCi, 1.6 TDCi
06.08 -
855 kg
785 kg
FORD
FIESTA VII VAN
1.4 TDCi, 1.5 TDCi, 1.6 TDCi
01.09 -
855 kg
785 kg
FORD
FIESTA VIII (HJ, HF)
1.0 EcoBoost, 1.5 TDCi
01.17 -
915 kg
850 kg
Product Vehicle Fitment Notes:
Without levelling control.
Except vehicels with 4WD.
Current lead time 1-2 weeks
Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit.Please note- This product requires bonding on using a polyurethane adhesive (such as tiger seal) not provided
This product is manufactured in two halves so may require painting for the perfect finish and cover the join/trim lines.
Our brows are now manufactured using a new process to insure they are one of the thinnest available on the market today. They measure between 1-1.5mm, thus preventing 'bonnet rub'.
Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit.
This product is provided with 3M tape to fit the brows to the car, we also recommend bonding these brows on using a polyuerthane adhesive (such as tigerseal) for maximum security.
1-2 Week lead time
Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit.
It comes with a full stainless steel fitting kit and is a simple direct fit.Sold as a Pair.
Fitting Tutorial Video - https://youtu.be/qJweY42iBbQ
Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit.
It comes with a full stainless steel fitting kit and is a simple direct fit. Fitting tutorial video - https://youtu.be/Qq9muC41d6I
Current leadtime approx 1-2 weeks
Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper
Our Fiesta MK7 ZS front splitter, Specifically styled design that follows the curves of the MK7's front bumper giving the Fiestas front end a more aggresive appearance..This product is manufactured utilising time proven composite technology.This splitter is supplied as pictured in a gloss black gell coat, along with a comprehensive stainless steel fixing kit, Branded with our TRC gel badge, ready to fit.Fitting Tutorial Video - https://youtu.be/sbaOSdQL47k
PRODUCT DESCRIPTIONThis product will require painting
Manufactured from fibreglass in a black gell coat.
This spoiler lip requires bonding on using a polyuerthane adhesive (such as tigerseal). Not supplied
Current leadtime approx 1-2 weeksA new style of rear spoiler we are proud to present!
Manufactured in sections and then clicked together. This attaches onto your existing spoiler using screws provided, we recommend some polyeurathane adhesive too (not provided).
Then hide the screw holes with the cover caps provided.
CAD designed from vehicle scan data and manufactured in Nylon 12 on our SLS 3D printer giving the perfect fit. These parts are then media blasted and coloured black giving an oem apperance.
This item may require manufacturing depending on stock levels, so please allow 1-2weeks for delivery.
The Styling Factory - Fiesta MK7 Spoiler Cap is a gloss black boot spoiler lip giving the rear end a much more aggressive look.This product is supplied in gloss black ready to be fitted.You'll need to use a polyurethane adhesive such a Tiger Seal to fit this product
Please note - This item is not a TRC product and is imported.
This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit)
Brand new to CEUK - the PlexiClick® Invisible Number plate holder system!
Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders!
Also perfect for those who swap their number plate for a show plate at events!
Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance.
Whats in the kit?
4x Plexiclick® V3 for mounting two UK license plates
8x screws for fixing the clips to your vehicle
4x Anti Vibration Rubber Bungs
1x Instruction Manual
Key Specifications:
Material: Premium quality, weather-resistant plastic
Fitment: Universal for UK standard license plates (front & rear)
Color: Clear, frameless design
Installation: Number plate just clicks into place and can be removed easily
Fits - 3-door & 5-door 1.25/1.4/1.6 Petrol Zetec along with 1.6 Ti-VCT 118PS & 134PS Duratec Petrol Zetec/Zetec S/S1600/Sport Platinum/Metal Edition.
Use the Image provided to find out if you have a flex or non-flex type exhaust.
Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality.
These Fiesta performance exhausts are made in 2"/50.8mm pipework and fit from the catalytic converter section backwards (Cat-back) these parts replace the centre and rear sections.
All relevant fittings and gaskets are supplied.
(Note - Does NOT fit the 1.0L eco-boost engine).
Please check which type of system you have fitted on your car (Flex or Non-Flex Type) before purchasing, use the image provided to ensure you receive the correct system, or alternatively send us images of your exhaust so we can identify this for you.
Independant power testing of the 1.6 litre Zetec S (with flex type exhaust) fitted along with an upgraded manifold and air filter revealed a +9bhp increase in power and a +11 ft-lb increase in torque taking the car to 127bhp and 123 lb-ft of torque before the re-map was applied.
Media
Example of Fiesta sports exhaust (Cat Back).
Example of Fiesta sports exhaust (Cat Back).
Example of Fiesta sports exhaust (Resonated Cat Back).
Cobra Sport Exhausts Ford promotional video.
Genuine FORD Kit Tpms Sensor
Brand: FORD (OE Part)
MPN: 2559459
Condition: New
Supplied as 1 or a set of 4
Should fit most ford models with TPMS, however if you would like to confirm please contact us with your vehicle Reg
KIT IS 300MM
FITS:
MAKE
MODEL
VARIANT
ENGINE SIZE (L)
FUEL TYPE
YEAR
BHP
Ford
Fiesta
MK7
1
2012
ALL BHP
Ford
Fiesta
MK7
1
2013
ALL BHP
Ford
Fiesta
MK7
1
2014
ALL BHP
Ford
Fiesta
MK7
1
2015
ALL BHP
Ford
Fiesta
MK7
1
2016
ALL BHP
Ford
Fiesta
MK7
1
2017
ALL BHP
Ford
Fiesta
MK7
1
Turbo
Petrol
2012
ALL BHP
Ford
Fiesta
MK7
1
Turbo
Petrol
2013
ALL BHP
Ford
Fiesta
MK7
1
Turbo
Petrol
2014
ALL BHP
Ford
Fiesta
MK7
1
Turbo
Petrol
2015
ALL BHP
Ford
Fiesta
MK7
1
Turbo
Petrol
2016
ALL BHP
Ford
Fiesta
MK7
1
Turbo
Petrol
2017
ALL BHP
Ford
Fiesta
MK7
1.3
2008
ALL BHP
Ford
Fiesta
MK7
1.3
2009
ALL BHP
Ford
Fiesta
MK7
1.3
2010
ALL BHP
Ford
Fiesta
MK7
1.3
2011
ALL BHP
Ford
Fiesta
MK7
1.3
2012
ALL BHP
Ford
Fiesta
MK7
1.3
2013
ALL BHP
Ford
Fiesta
MK7
1.3
2014
ALL BHP
Ford
Fiesta
MK7
1.3
2015
ALL BHP
Ford
Fiesta
MK7
1.3
2016
ALL BHP
Ford
Fiesta
MK7
1.3
2017
ALL BHP
Ford
Fiesta
MK7
1.4
2008
97
Ford
Fiesta
MK7
1.4
2009
97
Ford
Fiesta
MK7
1.4
2010
97
Ford
Fiesta
MK7
1.4
2011
97
Ford
Fiesta
MK7
1.4
2012
97
Ford
Fiesta
MK7
1.4
2013
97
Ford
Fiesta
MK7
1.4
2014
97
Ford
Fiesta
MK7
1.4
2015
97
Ford
Fiesta
MK7
1.4
Turbo
Diesel
2008
70
Ford
Fiesta
MK7
1.4
Turbo
Diesel
2009
70
Ford
Fiesta
MK7
1.4
Turbo
Diesel
2010
70
Ford
Fiesta
MK7
1.4
Turbo
Diesel
2011
70
Ford
Fiesta
MK7
1.4
Turbo
Diesel
2012
70
Ford
Fiesta
MK7
1.4
Turbo
Diesel
2013
70
Ford
Fiesta
MK7
1.5
Turbo
Diesel
2012
ALL BHP
Ford
Fiesta
MK7
1.5
Turbo
Diesel
2013
ALL BHP
Ford
Fiesta
MK7
1.5
Turbo
Diesel
2014
ALL BHP
Ford
Fiesta
MK7
1.5
Turbo
Diesel
2015
ALL BHP
Ford
Fiesta
MK7
1.5
Turbo
Diesel
2016
ALL BHP
Ford
Fiesta
MK7
1.5
Turbo
Diesel
2017
ALL BHP
Ford
Fiesta
MK7
1.6
2008
ALL BHP
Ford
Fiesta
MK7
1.6
2009
ALL BHP
Ford
Fiesta
MK7
1.6
2010
ALL BHP
Ford
Fiesta
MK7
1.6
2011
ALL BHP
Ford
Fiesta
MK7
1.6
2012
ALL BHP
Ford
Fiesta
MK7
1.6
2013
ALL BHP
Ford
Fiesta
MK7
1.6
2014
ALL BHP
Ford
Fiesta
MK7
1.6
2015
ALL BHP
Ford
Fiesta
MK7
1.6
2016
ALL BHP
Ford
Fiesta
MK7
1.6
2017
ALL BHP
Ford
Fiesta
MK7
1.6
Turbo
Diesel
2008
ALL BHP
Ford
Fiesta
MK7
1.6
Turbo
Diesel
2009
ALL BHP
Ford
Fiesta
MK7
1.6
Turbo
Diesel
2010
ALL BHP
Ford
Fiesta
MK7
1.6
Turbo
Diesel
2011
ALL BHP
Ford
Fiesta
MK7
1.6
Turbo
Diesel
2012
ALL BHP
Ford
Fiesta
MK7
1.6
Turbo
Diesel
2013
ALL BHP
Ford
Fiesta
MK7
1.6
Turbo
Diesel
2014
ALL BHP
Ford
Fiesta
MK7
1.6
Turbo
Diesel
2015
ALL BHP
Price is for one strut / prop
Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors
Pro Props Carbon Fibre Bonnet Prop
Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance.
Shaft
Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal.
Upper Fixing
Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook.
Lower Fixing
Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit.
Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet.
Sizing
Length of Carbon Section only: 550mm / 55cm
Total length of all parts: 670mm / 67cm
Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)
Check out our 4D Number Plate Tags, Designed to be fitted with 4D number plates (but can be fitted to any UK Number plate)
Available in any colour you want, with an array of logo's; again, in any colour you want! These simply stick to the left side of your number plate using the pre applied weatherproof backing tape!
The tags are only 50mm wide meaning they are 100% legal in terms of sizing under UK number plate law.
This listing is for one pair (2 tags)
Customise:
You choose the colour of your tag!
You choose the logo / emblem
You choose the orientation of the logo
You choose the colour of the logo!
Options:
We've created 2 sizes,
Option 1 is for vehicles who do not use a number plate holder or frame of any kind and just have the plate on the car, this is designed to stick on the left side of the plate and cover it fully.
Option 2 is for vehicles which have a number plate frame / holder - is designed a bit smaller so that it fits inside and still gives you the desired look (See disclaimer below)
Measurements:
Option 1: H 110mm // W 50mm // T 3mm
Option 2: H 100mm // W 47mm // T 3mm
Want something Custom? Drop us an email to support@ceuk.org and our design team would love to help!
Dislciamer:
The full size option may not follow the corners of your number plate and may be larger - this is designed to be universal and fit all number plates, it will always cover the corner completely
The smaller option may have a 1-2mm border between the tag and your frame, as all frames are different sizes this has been designed to be universal - see photo
For nearly 10 years, CEUK have offered illuminated door sills, in various colours and styles!
But we had a thought, what about those customers who want a fancy sill plate to greet them on entry to their vehicle, but arent necessarily bothered about it lighting up?
And up we came with this!
Made from a Dual layer premium Acrylic, our door sills are built on a 2mm acrlyic backing plate with a 3mm face plate in any colour of your choice!
Then, you can choose your design and design colours accordingly!
These are supplied as pairs and come fully built up ready to install using the 3m Tape already affixed to the underside!
Simply clean the area, remove the backing tape and stick in place - away you go!
These are truly universal and will fit any 3 or 5 door vehicle! Please note, they do not light up!
Build your own:
The base plate is always GLOSS BLACK - this can not be seen!
Face Plate: This is the colour of the sill that you will see (Black in our images, Matte Black is recommended)
Accent Colour: This is the design at either side of the logo - EG the lines
Logo Colour: The colour you want of the logo in the centre!
Measurements:
50cm Sill
60cm Sill
CM
MM
Width: 50cm
Width: 500mm
Width: 60cm
Width: 600mm
Height: 5cm
Height: 50mm
Height: 5cm
Height: 50mm
Thickness: 0.5cm
Thickness: 5mm
Thickness: 0.5cm
Thickness: 5mm
Customisation:
Want something totally custom and unique to you? Drop us an email at support@ceuk.org with your ideas, and we'd love to offer you a quote!
ETA
This product being fully customisable to your tastes is made to order and the lead time may be a couple of working days during busy times!
Introducing the Enhanced Edition LED H7 Mini
All the Power & Brightness of our V3 Bulb, but without the bulk!
This bulb will fit in ANY H7 Fitments and replaces the OEM lamp unit for an ultra bright replacement. This bulb can be used as a dipped & high beam upgrade as well as a foglight.
Vision, Without Restriction
The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components.
Designed to fit as any OEM part would, but offering a a higher lumen output.
We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem!
No longer any need for clips & caps!
The bulb is designed to fit in any H7 fixing without any adjustments or additional items, and utilising its 4 point technology, this can be orientated in either 2 or 4 location points to ensure the best output and zero polarity issues!
Specs:
Voltage - 12v
Wattage - 28w
LED Chip - 3570
Colour Temp - 6000k Ice White
Lumen - 6000Lm Per Bulb
Will fit in any vehicle which takes a H7 fitting
Good to know.
High Lumen Output (6000lm Per Bulb)
Improved visibility in the evenings
Reduced strain on the eyes
suitable for use in all builds of headlamps
Suitable for projector and reflector headlamps
What's in the box
2x H7 LED Units (6000k Default)
Warranty:
The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.
Vehicle Fitment:
Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering.
The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
