Performance - Ford Fiesta MK7 ST (2013-2017)

Please note: spacers are sold as PAIRS! if you want to do front and rear than qty x2 is needed!The all new CEUK Wheel spacer is here!Strengthened, Fortified and immortalised.Our Home brand CEUK Wheel spacers are now made exclusively for us by none other than Eibach in Germany!Lifetime GuaranteeUltra Strong Spacer & StudsBlack & Silver now availableMultiple Stud PatternsPlease ensure you select correctly!Some vehicles may be more beneficial with the longer supplied studs as the grooves on the back of some wheels aren't big enough to cater for stud in spacer!No Stud Needed = System 1Supplied with longer studs = System 6Stud in Spacer = System 4 Please note, Due to the nature and complexity of a wheel spacer, customers MUST know that the size they are ordering is correct prior to ordering by measuring your stud length and wheel groove depth. Unfortunately, if over tightened the integrity of the spacer and / or bolts can be compromised - and due to this, any spacer that has been fitted, trial fitted or removed from its packaging can not be returned! Please be aware of this as by ordering you agree to this!

Read more less

CEUK By Pipercross Panel Filter PP1743-CEUK measures 217mm x 161mm Made exclusively by Pipercross for CEUK, these UK Made foam filters are some of the highest quality Benefits of a CEUK/Pipercross panel filter: 30-40% more air flow over your OEM paper filter Better for the environment (washable and reuseable) Improved fuel economy Lifetime warranty on manufacturing defects Handmade in the UK The low maintenance and long lifespan aspects of a Pipercross filter come from the special triple layer foam that is used on all Pipercross filters. The outer core is coarse foam designed to trap larger particles, the middle core is Medium foam designed to trap most particles and the inner core is fine foam which will trap the remainder of the particles. The triple layer foam design ensures an exceptional level of engine protection in any conditions. Pipercross, based in the UK home of motorsport have over 30 years of road and track racing experience when it comes to filtration. Through this experience and engineering only the highest quality is achieved which is passed onto you through more power, torque, fuel economy & throttle response. Why settle for lesser filter brands which only have road experience when you can have quality proven on the track? 

Read more less

SLIGHT QUALITY ISSUE WITH A HANDFULL ON THE LAST BATCH SO THESE ARE NOW UP FOR CLEARANCE. THE MOULD APPEARS TO HAVE BLED CAUSING LITTLE BITS OF MELTED PLASTIC ON THE CLIPS WHICH NEEDS TRIMMING OFF WITH SNIPS OR A BLADE AND THE OVERALL QUALITY IS ABOUT 20% LOWER THAN EXPECTED. THESE ARE PERFECT FOR A "DIY'ER" WHO WANTS TO HAVE A FIDDLE ON THE CHEAP. NONE RETURNABLE Ford Performance logo in Red and White as seen in the pictures! Number plate surround with Ford Performance logo can be used for front or rear of vehicle - Sold as a Pair so one for each! Add a distinctive look to your Ford with Ford Performance licence plate holders for your vehicle registration plates.

Read more less

CLEARANCE ITEM- ITEMS ARE NONE RETURNABLE AD HAVE NO WARRANTY. PLEASE SEE PICTURES AS THESE ITEMS BOTH HAVE SMALL DEFECTS ON THEM.    Ford Performance logo in Red and White as seen in the pictures! Number plate surround with Ford Performance logo can be used for front or rear of vehicle - Sold as a Pair so one for each! Add a distinctive look to your Ford with Ford Performance licence plate holders for your vehicle registration plates. Best quality guaranteed!

Read more less

CLEARANCE ITEM- ITEMS ARE NONE RETURNABLE AD HAVE NO WARRANTY. PLEASE SEE PICTURES AS THESE ITEMS BOTH HAVE SMALL DEFECTS ON THEM.    Ford Performance logo in Red and White as seen in the pictures! Number plate surround with Ford Performance logo can be used for front or rear of vehicle - Sold as a Pair so one for each! Add a distinctive look to your Ford with Ford Performance licence plate holders for your vehicle registration plates. Best quality guaranteed!

Read more less

C:Performance Maf Housing to suit the following Vehicles: MK7.5 Fiesta ST180 / ST200 70mm Internal Diameter Made from Cast aluminium then machine finished these were part of our MK7 Fiesta ST180 Intake kits! These are reduced to clear due to our recent Rebrand from "C:Performance" to "Enhanced Performance" They come in raw metal and require painting or powder coating - This can be done with a spray can for cost effectiveness making this a really cheap addon, or powder coated for the ultimate finish Picture does not show screws, however this will be provided with 2x Small threaded screws for the sensor Designed to work With CEUK/Airtec/Forge etc Stage 2 & 3 intake kits Features iconic C Logo Raised on both sides  Knurled on silicone hose side to prevent slippage Machine finished for a perfect fit every time Will fit any 70mm inlet hose and filter

Read more less

This Silver Cut 3SDM 0.05 Wheel comes in a 16 by 9 size with a PCD of 4x108 and an offset of 20mmThe 16x9 0.05This wheel can accommodate any Centerbore up to 73.1mm. To ensure a perfect fit, Spigot Rings will be provided to match your car's Centrebore.NOTE: The images provided are generic images for this series of wheel and do not depict a specific size or ofset.

Read more less

Enhanced Performance Replacement Air Filter, with a 70mm diameter inlet, suitable for all Enhanced Performance intake kits or any other intake with a 70mm inlet filter! Also suitable as a simple upgrade! It is recommended to purchase a maf housing to work with this filter. Suitable for any vehicle with a 70mm inlet The replacement Air Filter is supplied pre-oiled and ready for installation.

Read more less

Fully serviceable and tuneable replacement turbocharger actuator for the Ford Fiesta MK7.5 ST180. If you require this actuator to be assembled with a standard spring suitable for the factory boost level please select Green Stock Vehicle from the drop-down list. If you require a stronger spring please select the required spring in the drop-down menu.Green – Stock SpringPurple – 13 Psi (0.9 bar)Yellow – 15 Psi (1.03 bar)Blue – 18 Psi (1.24 bar)Red – 20 Psi (1.38 bar) Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMACST180 Actuator1 x Forge Sticker This actuator is built with a green coded spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

A set of 2 gels Covers the chrome surrounds on the air vents Fits the following: Mk6.5 Fiesta (Facelift only) Mk7 & 7.5 Fiesta Mk4 Mondeo (may fit other models with the same vents)

Read more less

  Big boost pipe kit for the Fiesta ST 180. The kit includes: 3 hard pipes, 4 Pro Hose silicone hoses & free jubilee clips. This kit is designed for the modified fiesta ST 180. All pipes have swayed  ends to stop the pipes blowing off. Available with or without symposer take off. Please note: If fitting with the AIRTEC Motorsport Stage 2 intercooler, please make a note in the shipping notes – Additional hose required.     2.5" bore pipework. only available in black pipe and black hose Will fit Fiesta ST 200

Read more less

The brand new Big Aero wing from Airtec Motorsport is here!   Designed with the help of CEUK based on our MK7 RT330 Track car we are proud to be the first stockist of this amazing item AIRTEC Motorsport Rear Wing for Mk7 Fiesta The kit attaches to the car using our bespoke AIRTEC Motorsport designed brackets, that is bolted to the boot lid. Please note, this requires drilling to your boot lid and should be done by a competent professional. Key features: • Designed and developed in the UK • Tested on track and road with our own Time Attack car • Bespoke laser-cut and powder coated alloy brackets • Unique alloy end plates available in three powder coated colours • High-quality fibreglass centre blade section finished in satin black • Comprehensive fitting kit with all fixtures, fittings, instructions and drilling template Available in a choice of coloured end plates: Gloss Black Race Red Frozen White AIRTEC part no: ATMSFO10 Please note: We endeavour to deliver an extremely high quality product but due to the handmade manufacturing process there is the possibility of minor imperfection(s) on the centre wing blade

Read more less

Suitable for all 3dr MK7 Fiesta ST’s with standard front bumpers. Rear will fit any facelift Fiesta MK7 however front may need a slight adaption by a body shop to fit any “NONE ST’s” These arches are produced to a very high standard and require painting prior to install We HIGHLY recommend these are fitted by a bodyshop. They can be fitted without cutting existing arches, but depending how the car sits depends on the work needed. (Without cutting existing arches, you may not be able to sit as low as you want.)   Registered Design Right number 6012610

Read more less

Is your intercooler looking a bit run down? AIRTEC logo stencil for all AIRTEC intercoolers, freshen up the look of your intercooler. Stencils available for all AIRTEC intercoolers.     Small logo size - (31 x 5cm) Ideal for Mini, Fiesta 1.6 Diesel, 1.0 EcoBoost (Stage 1) Medium logo (44 x 7cm) Ideal for Fiesta MK7 1.0 EcoBoost (Stage 2), Seat Sport, 2.0 TFSI, Astra, Renault Megane. Large logo (61 x 10cm) Ideal for Focus ST 225, Focus RS MK2, Astra VXR (Stage 3) Please note: Stencils are not model specific and can be used on any AIRTEC intercooler.

Read more less

Reduce your stock shift throws with two different positions, ranging from 15% or 25%. Offering 2-positions truly allows the user more options to fine tune their shift throws! With a quick and easy installation process the stock shift weight does not need to be removed. This saves time and makes the installation quick and easy. Made from CNC machined aluminium with engraved AIRTEC Motorsport logo All hardware is 100% stainless steel including the ball stud. 2-position adjustable between (15% or 25%) reduction Completely reversible Installs in approx. 15 minutes Simple DIY fitting: Remove gear selector cable from original shifter, using long nose pliers or mole grips. Install top section of new short shifter which will locate it’s self due to cut out underneath top section. Then install lower section and new bolts and tighten, simply reconnect gear selector cable. 15% (Lower hole) or 25% (Top hole).

Read more less

AIRTEC Motosport have designed and released a bolt in roll cage for the Ford Fiesta ST180 and ST200 AND MK7 FL - NO drilling or cutting required. Designed primarily for use as a show cage/harness bar, these are a quick and easy fit retaining the use of original M10 seat belt mounting points. Constructed from FIA spec E355+N cold drawn seamless steel, aimed at strengthening and tightening the chassis in a simple and effective manner. No need for any additional mounting brackets to be welded in.

Read more less

AIRTEC Motorsport Boost Tap for Fiesta ST 180. CNC machined billet alloy one piece boost tap, designed to fit between the MAP sensor allowing fitment of turbo boost gauges or external blow of valves. A simple DIY install, allowing you to still fit the engine cover in place. AIRTEC Part No: ATMSFO116

Read more less

NOW ONLY AVAILABLE IN ALL BLACK AIRTEC Motorsport cold side boost pipe to fit Fiesta ST180/ST200 Please note, this item is a symposer DELETE only – Now only available in Pro-Series Black TECHNICAL DATA AIRTEC Motorsport cold side boost pipe to fit Fiesta ST180 / ST200 Kit includes: 1 hard pipe, 2 Pro Hoses silicone hose & free jubilee clips. This kit is designed for the modified Fiesta ST. All pipes have swaged ends to stop the pipes blowing off. 2.5″ bore pipework. Comes in Pro-Series Black Please note, this item is a symposer DELETE only – Now only available in Pro-Series Black AIRTEC part no: ATMSFO78

Read more less

We’ve developed another solution to our popular enlarged turbo elbow for the Fiesta ST180. This new design features a bespoke one-piece silicone connector to directly replace the original plastic item, or as an alternative to our enlarged alloy design. AIRTEC part number: ATMSFO121   TECHNICAL DATA AIRTEC Motorsport Enlarged Turbo Elbow for Fiesta ST180 in Silicone We’ve developed another solution to our popular enlarged turbo elbow for the Fiesta ST180. This new design features a bespoke one-piece silicone connector to directly replace the original plastic item, or as an alternative to our enlarged alloy design. The internal dimeter of the new Pro Hoses silicone hose measures 70mm from start to finish, offering uninterrupted flow throughout, compared to other enlarged elbow pipes on the market and is a vast improvement over Ford’s restrictive design. This solution also fits in place using a two-piece threaded adapter, which bolts to the flange as usual and then allows the new enlarged inlet pipe to easily tighten into place. This design feature means fitting becomes a much easier and simpler process, and is unlike any other on the market. Features: Direct replacement Enhanced induction noise Improves response and increases performance 70mm continuous internal diameter 10mm larger than original Ford hose Easy fit two-piece threaded adaptor Includes new gasket & fitting kit Fits standard and hybrid turbos   Registered Design Right: AIRTEC part number: ATMSFO121

Read more less

AIRTEC Motorsport boost guage kit for Fiesta ST 180. The AIRTEC Motorsport Fiesta MK7 boost guage kit, supplied with Turbosmart Boost Guage in PSI or BAR. Simple and classy OE look with no messy wiring. Comes complete with fitting guide for a quick & simple DIY install. Kit includes: Turbosmart backlit boost gauge (Bar or PSI) Gauge securing ring Vaccum hose Bracket and bolts CNC vaccum take off (Fits onto inlet manifold

Read more less

Allows exhaust gases to flow much faster. More Power! Expect more popping and a deeper exhaust note. Gain up to 10+ bhp (Depending on your car) This part is sold for motorsport and off road use only and will NOT pass an MOT emissions test or police roadside checks. AIRTEC part no: ATEXHFO7

Read more less

AIRTEC Motorsport turbo induction elbow for Fiesta ST 180. Direct replacement of the stock turbo induction pipe which has a very small internal diameter. Only company supplying with a gasket, to prevent any air leaks or engine management lights. Features: 10mm larger internal diameter than stock Direct replacement Enhanced induction noise Increased flow for more power Fits standard turbo and all hybrid turbos with original turbo housing Optional extra Pro Hose

Read more less

AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.    AIRTEC Part Number ATMER41:  TECHNICAL DATA AIRTEC Motorsport Embroidered High-Quality Car Mats  Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.  Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting. Fits Right-Hand Drive vehicles only   ⦁     AIRTEC Motorsport branded complete set of front and rear mats ⦁     Fitted with original retaining/mounting holes where applicable ⦁     High-quality finish in black with white embroidered logo ⦁     Huge range of makes and models available  ⦁     Vehicle specific – no trimming required  AIRTEC Part Number: ATMER41

Read more less

AIRTEC Motorsport lightweight alloy header tank for Fiesta MK7 ST180 – Complete with sight glass! No drilling required, uses original fixing points and is a direct replacement of the original Ford plastic header tank. Registered Design Right number: 6064605 AIRTEC part no: ATMSFO89

Read more less