Dual Port - TS-0203-1022
Dual outlet-type BOV. Dual Port vents both to the atmosphere and back into the air intake. Ports with sequential timing allow quieter operation during everyday driving while getting all the benefits of a vent-to-atmosphere BOV under race conditions. They are easily converted to a complete atmospheric or whole bypass unit using supplied port blanking plug.
Please note; that twin-turbo applications, such as the Audi S4 2.7L (B5) 97-01, will require two valves.
Plumb Back - TS-0203-1222
Full recirculating BOV. The Plumb Back system recirculates all excess pressure back into the intake system. Great for enthusiasts who do not want to be noticed but want the performance and reliability benefits of a quality BOV.
Please note; that this will require two valves for twin-turbo applications, such as the Audi S4 2.7L (B5) 97-01.
SUITABLE FORAudi A3 1.8T 20v 1996-2003
Audi A4 1.8T 20v 1997-2006
Audi A6 1.8T 20v 1997-2004
Audi S3 1.8T 20v 1999-2003
Audi TT 1.8T 20v 1998-2006
Bentley GT Continental 2003-current
Fiat Coupe 16 20V 1993-2000
Fiat Punto GT 1993-1999
Fiat Uno Mk1 1985-1989
Fiat Uno Mk2 1989-1995
Ford XR6 BA Turbo 2002-2005
Ford XR6 BF Turbo 2005-2008
Ford XR6 FG Turbo 2008-2014
Ford Sierra Cosworth 2WD & 4WD 1986-1992
Lancia Delta HF 1.6L 1979-1994
Lancia Delta Integrale 2.0L 8 16V 1989-1994
Mazda MX5 SP & SE 2004-2005
Peugeot 406 Sri 1997-1999
Peugeot 605 Sri 1991-1999
Porsche 911 (964) 1990-1994
Porsche 911 Turbo (993) 1995-1998
Porsche 911 Turbo (996) 1999-2005
Porsche 944 1985-1991
Porsche Cayenne Turbo 2006-current (requires two valves)
Saab 900 Turbo 1979-1993
Saab 9000 1990-1998
Saab 93 1999-current
Saab 95 1997-2012
Volvo 440 1987-1997
Volvo 480 1988-1995
Volvo 740 1984-1992
VW Golf Mk4 1.8 20v 1998-2006
VW Jetta 1.8 20v 1999-2006
VW Passat 1.8 20v 1999-2005
VW Polo GTI 1.8 20v 2005-2009
VW New Beetle 1.8 20v 1998-2011
Make
Model
Sub-Model
Engine
Engine Type
BHP
Year
Special Comments
Front Brake Caliper Type
FORD
Focus
Mk1
1.4
1998-2005
ATE
FORD
Focus
Mk1
1.6
1998-2005
ATE
FORD
Focus
Mk1
1.8
1998-2005
ATE
FORD
Focus
Mk1
2.0
1998-2005
ATE
FORD
Focus
Mk1
1.8
Turbo Diesel
1998-2005
ATE
Make
Model
Sub-Model
Engine
Engine Type
BHP
Year
Special Comments
Front Brake Caliper Type
FORD
Focus
Mk1
1.4
1998-2005
ATE
FORD
Focus
Mk1
1.6
1998-2005
ATE
FORD
Focus
Mk1
1.8
1998-2005
ATE
FORD
Focus
Mk1
2.0
1998-2005
ATE
FORD
Focus
Mk1 ST170
2.0
170
2002-2003
ATE
FORD
Focus
Mk1 ST170
2.0
170
2003-2005
ATE
FORD
Focus
Mk1
1.8
Turbo Diesel
1998-2005
ATE
FITS:
Make
Model
Sub-Model
Engine (L)
Engine Type
BHP
Year
Front Caliper Type
FORD
Fiesta
Mk6 ST150
2
150
2004-2008
ATE
FORD
Focus
Mk1 ST170
2
170
2002-2003
ATE
FORD
Focus
Mk1 ST170
2
170
2003-2005
ATE
Performance induction kit for the Ford Focus ST170 2.0 16V engines. This intake kit replaces the OEM restrictive air box.
Features
Easy to clean using our filter maintenance kit - CK-003
T304 Stainless steel cage support structure
100% Hand made in the UK – Guaranteed against manufacturing defects for life
What Does It Do?
Ramair SR induction kits are designed to eliminate the major sources of air flow restriction that your vehicle experiences from the factory intake system. Ramair guarantees that by replacing your restrictive OEM intake system with an aftermarket Ramair component you will see an increase in power and throttle response. The filters are designed to achieve high, almost unrestricted air flow while maintaining filtration levels critical to ensure the longevity of your engine.
What Will I Get?
Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include:
Twin layer foam filter
Breather filter
Black silicone coupler
Full fitting kit with every bolt/clips/brackets
Easy to follow step by step instructions
Fitment Compatibility Chart
This product fits the following:
Year
Make
Model
Engine
2002-2004
Ford
Focus (MK1)
2.0 ST170
This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit)
Brand new to CEUK - the PlexiClick® Invisible Number plate holder system!
Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders!
Also perfect for those who swap their number plate for a show plate at events!
Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance.
Whats in the kit?
4x Plexiclick® V3 for mounting two UK license plates
8x screws for fixing the clips to your vehicle
4x Anti Vibration Rubber Bungs
1x Instruction Manual
Key Specifications:
Material: Premium quality, weather-resistant plastic
Fitment: Universal for UK standard license plates (front & rear)
Color: Clear, frameless design
Installation: Number plate just clicks into place and can be removed easily
Genuine FORD Kit Tpms Sensor
Brand: FORD (OE Part)
MPN: 2559459
Condition: New
Supplied as 1 or a set of 4
Should fit most ford models with TPMS, however if you would like to confirm please contact us with your vehicle Reg
Price is for one strut / prop
Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors
Pro Props Carbon Fibre Bonnet Prop
Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance.
Shaft
Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal.
Upper Fixing
Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook.
Lower Fixing
Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit.
Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet.
Sizing
Length of Carbon Section only: 550mm / 55cm
Total length of all parts: 670mm / 67cm
Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)
Check out our 4D Number Plate Tags, Designed to be fitted with 4D number plates (but can be fitted to any UK Number plate)
Available in any colour you want, with an array of logo's; again, in any colour you want! These simply stick to the left side of your number plate using the pre applied weatherproof backing tape!
The tags are only 50mm wide meaning they are 100% legal in terms of sizing under UK number plate law.
This listing is for one pair (2 tags)
Customise:
You choose the colour of your tag!
You choose the logo / emblem
You choose the orientation of the logo
You choose the colour of the logo!
Options:
We've created 2 sizes,
Option 1 is for vehicles who do not use a number plate holder or frame of any kind and just have the plate on the car, this is designed to stick on the left side of the plate and cover it fully.
Option 2 is for vehicles which have a number plate frame / holder - is designed a bit smaller so that it fits inside and still gives you the desired look (See disclaimer below)
Measurements:
Option 1: H 110mm // W 50mm // T 3mm
Option 2: H 100mm // W 47mm // T 3mm
Want something Custom? Drop us an email to support@ceuk.org and our design team would love to help!
Dislciamer:
The full size option may not follow the corners of your number plate and may be larger - this is designed to be universal and fit all number plates, it will always cover the corner completely
The smaller option may have a 1-2mm border between the tag and your frame, as all frames are different sizes this has been designed to be universal - see photo
For nearly 10 years, CEUK have offered illuminated door sills, in various colours and styles!
But we had a thought, what about those customers who want a fancy sill plate to greet them on entry to their vehicle, but arent necessarily bothered about it lighting up?
And up we came with this!
Made from a Dual layer premium Acrylic, our door sills are built on a 2mm acrlyic backing plate with a 3mm face plate in any colour of your choice!
Then, you can choose your design and design colours accordingly!
These are supplied as pairs and come fully built up ready to install using the 3m Tape already affixed to the underside!
Simply clean the area, remove the backing tape and stick in place - away you go!
These are truly universal and will fit any 3 or 5 door vehicle! Please note, they do not light up!
Build your own:
The base plate is always GLOSS BLACK - this can not be seen!
Face Plate: This is the colour of the sill that you will see (Black in our images, Matte Black is recommended)
Accent Colour: This is the design at either side of the logo - EG the lines
Logo Colour: The colour you want of the logo in the centre!
Measurements:
50cm Sill
60cm Sill
CM
MM
Width: 50cm
Width: 500mm
Width: 60cm
Width: 600mm
Height: 5cm
Height: 50mm
Height: 5cm
Height: 50mm
Thickness: 0.5cm
Thickness: 5mm
Thickness: 0.5cm
Thickness: 5mm
Customisation:
Want something totally custom and unique to you? Drop us an email at support@ceuk.org with your ideas, and we'd love to offer you a quote!
ETA
This product being fully customisable to your tastes is made to order and the lead time may be a couple of working days during busy times!
Description
Introducing the Enhanced Edition LED H8/11 Fog Bulb Mini
All the Power & Brightness of our V3 Bulb, but without the bulk!
This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped & high beam upgrade
Vision, Without Restriction
The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components.
Designed to fit as any OEM part would, but offering a a higher lumen output.
We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem!
Specs:
Voltage - 12v
Wattage - 28w
LED Chip - 3570
Colour Temp - 6000k Ice White
Lumen - 6000Lm Per Bulb
Will fit in any vehicle which takes a H8 or H11 fitting
Good to know.
High Lumen Output (6000lm Per Bulb)
Improved visibility in the evenings
Reduced strain on the eyes
suitable for use in all builds of headlamps
Suitable for projector and reflector headlamps
What's in the box
2x H8/11 LED Units (6000k Default)
Warranty:
The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.
Vehicle Fitment:
Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering.
The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
For hydraulic brake and clutch systems.
Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3)
Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual.
Min. dry boiling point 260°C. Min. wet boiling point 165°C
Notice
Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs.
Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water.
DOT 4
Technical Info
Contents
500 ml
Colour
Pale Amber
Chemical basis
Butoxyethanol
Shelf life from production
36 Month
Min. wet boiling point
165 °C
Min. dry boiling point
260 °C
Density
1.052 g/ml
Density conditions
at 20°C
pH value
7-11
Whilst the original chargecooler works well on standard car, as soon more boost is added from a simple remap, the original Ford radiator struggles to sustain safe temperatures, which in turn can make the car run slower as charge air temps increase and the ECU is forced to restrict power to combat it.
Our Mk1 Focus RS chargecooler radiator upgrade features a 70mm core, which is 30mm bigger than the OEM radiator. This increases capacity to 9.7 litres, compared to tee original radiator, which measures 5.5 litres. This gives an overall increase in capacity of 76%.
Best of all, it’s a direct fit with no extra modifying needed and simply reuses all the original fixings and fittings.
Dimensions:Height: 150mmWidth: 920mmDepth: 70mmCapacity: 9.7 litres
Features:
Direct replacement of the original radiator
76% increase in volume over standard
Improved cooling ability for sustained performance
Ideal for tuned cars that want the standard look
High quality powdered coated black finish
AIRTEC part no: ATRADFO7
3D / 4D Number Plate frames!
These are an Acrylic frame that your number plate sits in to add a bit of style to your car! Made up of 3 pieces to give a full customised number plate holder!
Backing Base Plate
Frame Surround
Coloured insert with or without logo!
Price is for One Frame - if you would like front and rear, please order QTY x2
You choose the following 3 options:
The colour of your Insert
Which logo you want - If Any
The colour of your logo!
The frame of the plate is always provided in BLACK.
The logo is cut out of the insert - then a second coloured logo of your choise is inserted into the gap to give it a fully smoth and professional finish!
How it works?
Simply insert your number plate inside the frame using either a gel or foam double sided tape - then attach the frame to your car. These are suitable for front and rear number plates.
Due to the nature of acrylic, its difficult to drill without it cracking so the frame needs to be stuck to the vehicle. We do offer a full fitting kit as well which is smaller double sided acrylic rectangles that attach to the back side of the frame and again to the car.
Fitment:
Please be aware these require a FLAT SURFACE to be adhered to, For the rear which has the beveled recesses for the holes our fitting kit will allow fitment, however, due to their weight and inability to be drilled you will struggle to insert these plates over say a honeycomb or mesh grill. In these instances it may be worth just ordering for the rear!
It is important you fully prepare the area before sticking these in place to prevent loss. If the plate falls off your vehicle and is damaged or lost sadly this is not covered under warranty.
If you require any customisation please get in touch via Email or Whatsapp, If we can do this - we will. This may incur additional costs however!
Fits:
Focus RS Mk1
Models: 2002 - 2004
6 Line set
Why should I change my to Braided Stainless Steel ones?
YOUR SAFETY!!
Better brake pedal feel – firmer under pressure
More efficient braking- the PTFE lined, Stainless steel will not expand under load unlike OEM rubber hoses
Long Lasting- PVC outer and Stainless-Steel end fittings will outlast the standard Mild Steel and rubber lines many times
Available in many outer colour options to compliment your vehicle
Rigorously tested and approved to the FMVSS 106 certification standards
Pro-Series Satin Black Focus RS camshaft cover front heatshield trim with HOT! logoReplaces fords original heat shield trim, easy to fit and looks great!Fits onto the front of the camshaft cover, behind the turbo.Part no: ASCOVFO114
Focus Mk1 lightweight replacement polished alloy water header tankNo Drilling required, uses original fixing points and is a direct replacement for original Ford plastic header tank.Please note the Header tank comes with a non decorative cap, however for the perfect show look why not add a decorative cap.
AIRTEC Part No: ATMSFO21
Performance hose kit for the Ford Focus RS Mk1 2.0 . Kit includes 15 Ancillary hoses.Made by Pro Hoses.Please note: Custom colours are made to order, please expect a 5-10 day delay on custom colours.Peak show times may be a longer 7-10 day delay.Available in a variety of colours.Part no: PH/ANCFO12
Performance hose kit for the Ford Focus Mk1 ST 170. Kit includes 9 ancillary hoses.Made by Pro Hoses.Please note: Custom colours are made to order, please expect a 5-10 day delay on custom colours.Peak show times may be a longer 7-10 day delay.Part no: PH/ANCFO23Available in a variety of colours.
Performance hose kit for the Ford Focus RS Mk1 2.0 (With Dump Valve Spout). Kit includes two boost hoses.Made by Pro Hoses.Please note: Custom colours are made to order, please expect a 5-10 day delay on custom colours.Peak show times may be a longer 7-10 day delay.Available in a variety of colours.Part no: PH/BOSFO8
Performance hose kit for the Ford Focus RS Mk1 2.0. Kit includes two boost hoses.Made by Pro Hoses.Please note: Custom colours are made to order, please expect a 5-10 day delay on custom colours.Peak show times may be a longer 7-10 day delay.Available in a variety of colours.Part no: PH/BOSFO9
Performance hose kit for the Ford Focus RS Mk1Kit includes two coolant hoses.Made by Pro HosesPlease note: Custom colours are made to order, please expect a 5-10 day delay on custom colours.Peak show times may be a longer 7-10 day delay.Part no: PH/COLFO17