Performance - Ford Kuga MK2 (2012-2019)

Product Overview Enhance the style and presence of your with the 4D ST Key Ring – Premium Keychain in Multiple Colours from Car Enhancements UK. This high-quality upgrade delivers a perfect fit and aggressive design tailored for enthusiasts. Key Features Brand: Car Enhancements UK Vehicle Fitment: High-quality construction and finish Direct fit installation with no major modifications Why Buy from Car Enhancements UK? Trusted aftermarket parts specialist Fast worldwide shipping Excellent customer service and support More from Car Enhancements UK Browse all Car Enhancements UK parts for your build.

Read more less

This is a performance enhancing boost pipe kit for the 2020+ Ford Kuga 2.0 Features Improved throttle response Black powder coated and silicone inlet pipe Dyno results: max gains 5-7bhp (this may vary dependant on vehicle) What Does It Do? This boost pipe kit delivers increased air flow over the standard restrictive part. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black powdercoated and silicone pipes Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2017-2021 Ford Kuga (MK2) 2.0 EcoBoost

Read more less

ITG Profilter is the lightest and most capable filter on the market, designed to optimise the performance of every car. Used in Formula 1 vehicles and throughout the world of motorsport, Profilter's advanced technology makes it the filter of choice for automotive professionals and enthusiasts. Hand manufactured in the UK using a high-grade Trifoam system, Profilter gives three layers of air filtration to trap even the finest pieces of dust and dirt, while optimising air flow performance. Profilter is long-lasting, economical, and maximises performance from road to race. Filter size: 70 x 192 Make Model Variant Year(s) Engine Code BHP Quantity Required Ford C-MAX I, II, Grand C-MAX All Variants 07- 1 Ford Focus II [Inc. Cabriolet & C-MAX] All Variants 07-11 [Excl. RS Turbo, ST] 1 Ford Focus II [Inc. Cabriolet & C-MAX] RS, RS500 09- 305, 350 1 Ford Focus III All Variants 11- [Excl. ST] 1 Ford Focus III All Variants Inc ST & RS 12- 86-360 1 Ford Kuga I, II 1.6 [EcoBoost SCTi] 2.0 [TDCi] 08- Duratorq, Sigma 120, 136, 140, 150, 163, 180, 182 1 Ford Kuga I, II 1.5 [EcoBoost] 14- 150, 182 1 Ford Tourneo, Courier, Transit Connect I, II All Variants 13-16 [Excl. Courier] 1 Mazda 3, 5 (BK, BL, BM, CR, CW) 1.6 [CD, MZ-CD] 10- 115 1 Volvo C30 1.6 [D] 07-10 D4164T 109 1 Volvo C30 1.6 [D2] 1.8, 2.0 [Flexifuel] 07-10 B4164S3, B4184S8/11, B4204S3/4, D4162T 100, 114, 125, 145 1 Volvo C30 2.0 [D] 07-10 D4204T 136 1 Volvo C70 I, II 2.0 [D] 07- D4204T 136 1 Volvo S40 II, V50 1.6 [D2] 1.8, 2.0 [Flexifuel] 07- B4164S3, B4184S8/11, B4204S3/4, D4162T 100, 114, 125, 145 1 Volvo S40 II, V50 2.0 [D] 07- D4204T 136 1 Volvo S40 II, V50 1.6 [D] 07-10 D4164T 109 1 Volvo V40 II, Cross Country 1.6 [D2, T2/3/4] 12- B4164T/T3/T4, D4162T 115, 120, 150, 180     Will an ITG ProFilter increase performance? Yes, an ITG ProFilter can increase performance. It is a high-flow air filter upgrade designed to fit inside the car’s existing airbox. It is designed to provide better filtration than a standard paper air filter while offering a larger open surface area. This can result in increased horsepower, torque, and improved throttle response. Is there an environmental benefit to using an ITG ProFilter? Another critical benefit to note is the environmental one. The ITG ProFilter is designed to be reusable, whereas a single-use paper filter is not. When you replace a single-use paper filter, you are throwing away a filter that is only partially used. With a cleanable filter, you can reuse the filter many times, reducing the amount of waste produced.Second, cleanable air filters can save energy. When a dirty air filter is used, it can restrict airflow to the engine. This can cause the engine to work harder, decreasing fuel efficiency and increasing emissions. A cleanable filter can help keep the engine running smoothly and efficiently, saving fuel and reducing emissions.

Read more less

Make Model Sub-Model Engine Engine Type BHP Year Special Comments Front Brake Caliper Type FORD Kuga Mk2 1.5 Turbo 180 2014-2019 4WD ATE FORD Kuga Mk2 1.5 Turbo 180 2014-2019 4WD Electric Handbrake ATE FORD Kuga Mk2 1.6 Turbo 180 2013-2014 ATE FORD Kuga Mk2 1.5 Turbo Diesel 120 2016-2019 ATE FORD Kuga Mk2 1.5 Turbo Diesel 120 2016-2019 Electric Handbrake ATE FORD Kuga Mk2 2.0 Turbo Diesel 140 2013-2014 ATE FORD Kuga Mk2 2.0 Turbo Diesel 161 2013-2014 ATE FORD Kuga Mk2 2.0 Turbo Diesel 150 2014-2019 FWD ATE FORD Kuga Mk2 2.0 Turbo Diesel 150 2014-2019 FWD Electric Handbrake ATE FORD Kuga Mk2 2.0 Turbo Diesel 180 2014-2019 4WD ATE FORD Kuga Mk2 2.0 Turbo Diesel 180 2014-2019 4WD Electric Handbrake ATE

Read more less

Make Model Sub-Model Engine Engine Type BHP Year Special Comments Front Brake Caliper Type FORD Kuga Mk2 1.5 Turbo 180 2014-2019 4WD ATE FORD Kuga Mk2 1.5 Turbo 180 2014-2019 4WD Electric Handbrake ATE FORD Kuga Mk2 1.6 Turbo 180 2013-2014 ATE FORD Kuga Mk2 1.5 Turbo Diesel 120 2016-2019 ATE FORD Kuga Mk2 1.5 Turbo Diesel 120 2016-2019 Electric Handbrake ATE FORD Kuga Mk2 2.0 Turbo Diesel 140 2013-2014 ATE FORD Kuga Mk2 2.0 Turbo Diesel 161 2013-2014 ATE FORD Kuga Mk2 2.0 Turbo Diesel 150 2014-2019 FWD ATE FORD Kuga Mk2 2.0 Turbo Diesel 150 2014-2019 FWD Electric Handbrake ATE FORD Kuga Mk2 2.0 Turbo Diesel 180 2014-2019 4WD ATE FORD Kuga Mk2 2.0 Turbo Diesel 180 2014-2019 4WD Electric Handbrake ATE

Read more less

Make Model Sub-Model Engine Engine Type BHP Year Special Comments Front Brake Caliper Type FORD Kuga Mk2 1.5 Turbo 120 2016-2019 FWD ATE FORD Kuga Mk2 1.5 Turbo 150 2014-2019 FWD ATE FORD Kuga Mk2 1.5 Turbo 180 2014-2019 4WD ATE FORD Kuga Mk2 1.6 Turbo 150 2013-2014 ATE FORD Kuga Mk2 1.6 Turbo 180 2013-2014 ATE FORD Kuga Mk2 1.6 Turbo 180 2013-2014 ATE FORD Kuga Mk2 1.5 Turbo Diesel 120 2016-2019 ATE FORD Kuga Mk2 2.0 Turbo Diesel 140 2013-2014 ATE FORD Kuga Mk2 2.0 Turbo Diesel 161 2013-2014 ATE FORD Kuga Mk2 2.0 Turbo Diesel 150 2014-2019 FWD ATE FORD Kuga Mk2 2.0 Turbo Diesel 150 2014-2019 4WD ATE FORD Kuga Mk2 2.0 Turbo Diesel 180 2014-2019 4WD ATE

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:70mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:76mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:83mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:90mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This filter is designed to be fitted to the outside of a rigid pipe such as a MAF sensor housing. These filters have an rubber polymer neck and a cone shaped filter element. This enables easy fitting to space-restricted engine compartments, whilst providing a large surface to maximise potential air flow. The filters are constructed using stainless steel cage internal and our famous 15mm thick twin layer foam.  Ramair universal filters are designed and manufactured for a very diverse range of applications and are made here in the UK. They are available in many different sizes and styles available.  Clean using our filter maintenance kit - CK-003 This product has the following dimensions: Filter Internal Neck Diameter: You choose Filter Neck Length: 23mm Filter Overall Height: 130mm Filter Base Width: 150mm Filter Top Width: 93mm Filter Material: 15mm Dual Layer Foam

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This filter is designed to be inserted into a flexible hose such as a rubber or silicone intake pipe. These filters have an aluminium ram-pipe neck and a cone shaped filter element. This integral cone channels all the incoming air, towards the inlet manifold, and in doing so, reduces unnecessary turbulence. These filters are also cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of pleated surface area an added boost of power to your engine too! These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of motorsport filtration the pleated range by Ramair is the premium choice on the market today for your fast road or track car. With its large size, technologically advanced filter and bell mouth alloy spun base this filter kit is capable of handling extremely large power & flow rates. Filter Outer Neck Diameter: Select Your Option Filter Neck Length: 45mm (1.8inch) Filter Overall Length: 185mm (7.3inch) Filter Base Width: 150mm (5.9inch) Filter Top Width: 120mm (4.7inch) Filter Material: Pleated Nanofibre Filter Base Material: Aluminium Filter Base Finish: Black Powder Coat

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

Genuine FORD Kit Tpms Sensor  Brand: FORD (OE Part) MPN: 2559459 Condition: New Supplied as 1 or a set of 4 Should fit most ford models with TPMS, however if you would like to confirm please contact us with your vehicle Reg

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

Check out our 4D Number Plate Tags, Designed to be fitted with 4D number plates (but can be fitted to any UK Number plate) Available in any colour you want, with an array of logo's; again, in any colour you want! These simply stick to the left side of your number plate using the pre applied weatherproof backing tape! The tags are only 50mm wide meaning they are 100% legal in terms of sizing under UK number plate law. This listing is for one pair (2 tags) Customise: You choose the colour of your tag! You choose the logo / emblem You choose the orientation of the logo You choose the colour of the logo! Options: We've created 2 sizes, Option 1 is for vehicles who do not use a number plate holder or frame of any kind and just have the plate on the car, this is designed to stick on the left side of the plate and cover it fully. Option 2 is for vehicles which have a number plate frame / holder - is designed a bit smaller so that it fits inside and still gives you the desired look (See disclaimer below) Measurements: Option 1: H 110mm // W 50mm // T 3mm Option 2: H 100mm // W 47mm // T 3mm Want something Custom? Drop us an email to support@ceuk.org and our design team would love to help! Dislciamer: The full size option may not follow the corners of your number plate and may be larger - this is designed to be universal and fit all number plates, it will always cover the corner completely The smaller option may have a 1-2mm border between the tag and your frame, as all frames are different sizes this has been designed to be universal - see photo  

Read more less

Check out our 4D Number Plate Tags, Designed to be fitted with 4D number plates (but can be fitted to any UK Number plate) Available in any colour you want, with an array of logo's; again, in any colour you want! These simply stick to the left side of your number plate using the pre applied weatherproof backing tape! The tags are only 50mm wide meaning they are 100% legal in terms of sizing under UK number plate law. This listing is for one pair (2 tags) Customise: You choose the colour of your tag! You choose the logo / emblem You choose the orientation of the logo You choose the colour of the logo! Options: We've created 2 sizes, Option 1 is for vehicles who do not use a number plate holder or frame of any kind and just have the plate on the car, this is designed to stick on the left side of the plate and cover it fully. Option 2 is for vehicles which have a number plate frame / holder - is designed a bit smaller so that it fits inside and still gives you the desired look (See disclaimer below) Measurements: Option 1: H 110mm // W 50mm // T 3mm Option 2: H 100mm // W 47mm // T 3mm Want something Custom? Drop us an email to support@ceuk.org and our design team would love to help! Dislciamer: The full size option may not follow the corners of your number plate and may be larger - this is designed to be universal and fit all number plates, it will always cover the corner completely The smaller option may have a 1-2mm border between the tag and your frame, as all frames are different sizes this has been designed to be universal - see photo  

Read more less

For nearly 10 years, CEUK have offered illuminated door sills, in various colours and styles! But we had a thought, what about those customers who want a fancy sill plate to greet them on entry to their vehicle, but arent necessarily bothered about it lighting up? And up we came with this! Made from a Dual layer premium Acrylic, our door sills are built on a 2mm acrlyic backing plate with a 3mm face plate in any colour of your choice!  Then, you can choose your design and design colours accordingly! These are supplied as pairs and come fully built up ready to install using the 3m Tape already affixed to the underside! Simply clean the area, remove the backing tape and stick in place - away you go! These are truly universal and will fit any 3 or 5 door vehicle! Please note, they do not light up! Build your own: The base plate is always GLOSS BLACK - this can not be seen! Face Plate: This is the colour of the sill that you will see (Black in our images, Matte Black is recommended) Accent Colour: This is the design at either side of the logo - EG the lines Logo Colour: The colour you want of the logo in the centre! Measurements: 50cm Sill 60cm Sill CM MM Width: 50cm Width: 500mm Width: 60cm Width: 600mm Height: 5cm Height: 50mm Height: 5cm Height: 50mm Thickness: 0.5cm Thickness: 5mm Thickness: 0.5cm Thickness: 5mm Customisation: Want something totally custom and unique to you? Drop us an email at support@ceuk.org with your ideas, and we'd love to offer you a quote! ETA This product being fully customisable to your tastes is made to order and the lead time may be a couple of working days during busy times!

Read more less

Introducing the Enhanced Edition LED H7 Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in ANY H7 Fitments and replaces the OEM lamp unit for an ultra bright replacement. This bulb can be used as a dipped & high beam upgrade as well as a foglight. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! No longer any need for clips & caps! The bulb is designed to fit in any H7 fixing without any adjustments or additional items, and utilising its 4 point technology, this can be orientated in either 2 or 4 location points to ensure the best output and zero polarity issues! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H7 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H7 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped & high beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H8 or H11 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H8/11 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

For hydraulic brake and clutch systems. Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3) Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual. Min. dry boiling point 260°C. Min. wet boiling point 165°C Notice Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs. Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water.  DOT 4 Technical Info Contents 500 ml Colour Pale Amber Chemical basis Butoxyethanol Shelf life from production 36 Month Min. wet boiling point 165 °C Min. dry boiling point 260 °C Density 1.052 g/ml Density conditions at 20°C pH value 7-11

Read more less

 Bespoke Custom Design Mudflaps to fit:Ford Kuga Mk2.5 (2016-2019)** Fits models with the ST and ST Line body kits ONLY - No Drilling Required! Designed and made to order here in the UK by us 'The rallyflapZ Team' Designed for Looks & Protection Only the Best Materials used Easy Installation Long Lasting Exceptional Flexibility Impact Resistance FORD KUGA MK2.5 Face Lift (16-19) KIT INCLUDES:Front Fixing Kit Contents:2 x Front Mud Flaps2 x Front Stainless Steel Laser Cut Brackets (Powder Coated Black)+  Fixings RequiredRear Fixing Kit Contents:2 x Rear Mud Flaps2 x Rear Stainless Steel Laser Cut Brackets (Powder Coated Black)+  Fixings Required(The plugs provided are very strong and are difficult to remove once inserted)Avoid expensive re-sprays and get some protection now against Road Grit, Mud, Dirt & GreaseOur rallyflapZ offer outstanding durability when compared to conventional OEM hard plastic or moulded Mudflaps, You can be assured that with our rallyflapZ come peace of mind that they can be exposed to the harshest weather conditions without any danger of corrosion.MATERIALS AVAILABLE: 3.2mm Thick PVC (Gloss) - Reintroduced to cater for all customer budgets. 4mm Thick PVC (Gloss) - Perfectly fine for everyday road use - High Quality with a Gloss Finish 4mm Thick PVC (Satin) - Perfectly fine for everyday road use - High Quality with a Satin / Matt-like Finish IMPORTANT NOTES: Our PVC Material is of extremely high quality yet can go brittle and crack in extreme temperatures, we recommend that in this scenario you order the Kaylan - Polyurethane. LOGO'SOur Logo's are a High quality vinyl material which is applied once the Mud Flaps have been cut to shape and sanded.The Vinyl is long lasting once applied to the mud flap material - however in the event of peeling or damage to them - we offer a life time guarantee on them!

Read more less

PFC13-14 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 13-14mm --- PFC15-16 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 15-16mm --- PFC17-18 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 17-18mm --- PFC19-20 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 19-20mm --- PFC21-22 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 21-22mm --- PFC23-24 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 23-24mm --- PFC25-27 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 25-27mm --- PFC28-30 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 28-30mm --- PFC31-33 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 31-33mm

Read more less

Here we introduce to you our #Enhanced Edition H1 LED Upgrade. This product can NOT be used as a cornering light! Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. Unlike other suppliers, CEUK has developed an LED bulb which does not require the splicing of wires and difficult intricate clips to hold the lamp in place. This unit fits in its entirety as an OEM H1 Halogen bulb would. The LED's come as standard 6000K ice white,  Its worth noting that due to the design of headlamps, different lamps and light units may give different results to those found in our pictures. Good to know. High Lumen Output Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 20,000 (10,000 Per Bulb) What's in the box 2x H1 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less