Performance - Ford Kuga MK3 (2019-Present)

The all new ST logo Key Chain by CEUK Featuring a Gloss Black central logo outline and 1 logo either side in your chosen colour, to give a fully 4D design! Made from Premium 3mm Acrylic sections, this keyring has the following specs: Width: 81mm / 8.1cm Height: 37mm / 3.7cm Thickness: 9mm / 0.9cm Supplied fully assembled complete with Key Chain, this is the perfect modification for any Ford Car Key! Please note: The centre is supplied Gloss Black as standard, if you would like a different colour please contact us via email or whatsapp.

Read more less

Description This is a performance enhancing induction kit for the 2020+ Ford Kuga 2.0 ST-Line. Features Improved throttle response Black powder coated heat shield and silicone inlet pipe Easy to maintain dry pleated filter Cold air straight to the turbo charger What Does It Do? This induction kit delivers increased air flow and induction noise over the standard restrictive air box. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black powder coated hard pipe Black silicone couplers Red pleated planel filter Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2019-2025 Ford Kuga (MK3) 2.0 EcoBoost

Read more less

Description Fits: Ford Kuga 2.0 2020+

Read more less

This is a performance enhancing inlet hose for the 2020+ Ford Kuga 2.0l. Features Improved throttle response Black silicone inlet hose Dyno results: max gains 5-7bhp (this may vary dependant on vehicle) What Does It Do? This inlet hose delivers increased smoother air flow over the standard restrictive part. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black inlet hose with MST logo Clamp to install and replace original part

Read more less

Make Model Sub-Model Engine Engine Type BHP Year Special Comments Front Brake Caliper Type FORD Kuga Mk3 1.5 Turbo 120 2019- ATE FORD Kuga Mk3 1.5 Turbo 150 2019- ATE FORD Kuga Mk3 2.5 and Electric 225 2019- ATE FORD Kuga Mk3 1.5 Turbo Diesel 120 2019- ATE FORD Kuga Mk3 2.0 Turbo Diesel Hybrid 150 2019- ATE FORD Kuga Mk3 2.0 Turbo Diesel 190 2019- 4WD ATE

Read more less

Make Model Sub-Model Engine Engine Type BHP Year Special Comments Front Brake Caliper Type FORD Kuga Mk3 1.5 Turbo 120 2019- ATE FORD Kuga Mk3 1.5 Turbo 150 2019- ATE FORD Kuga Mk3 1.5 Turbo Diesel 120 2019- ATE FORD Kuga Mk3 2.0 Turbo Diesel Hybrid 150 2019- ATE FORD Kuga Mk3 2.0 Turbo Diesel 190 2019- 4WD ATE

Read more less

This brake pad also fits the following models, ensure you select correctly: Make Model Sub-Model Engine Engine Type BHP Year Special Comments Front Brake Caliper Type FORD Focus Mk4 1.0 Turbo 85 2018- ATE FORD Focus Mk4 1.0 Turbo 101 2018- ATE FORD Focus Mk4 1.0 Turbo 125 2018- ATE FORD Focus Mk4 1.0 Turbo hybrid 125 2020- ATE FORD Focus Mk4 1.0 Turbo hybrid 155 2020- ATE FORD Focus Mk4 1.5 Turbo 150 2018- ATE FORD Focus Mk4 1.5 Turbo 150 2018- Multilink rear 282mm front discs ATE FORD Focus Mk4 1.5 Turbo 150 2018- Multilink rear 308mm front discs ATE FORD Focus Mk4 1.5 Turbo 180 2018- ATE FORD Focus Mk4 1.5 Turbo 180 2018- Multilink rear 282mm front discs ATE FORD Focus Mk4 1.5 Turbo 180 2018- Multilink rear 308mm front discs ATE FORD Focus Mk4 1.5 Turbo Diesel 95 2018- ATE FORD Focus Mk4 1.5 Turbo Diesel 120 2018- ATE FORD Focus Mk4 2.0 Turbo Diesel 150 2018- ATE FORD Focus Mk4 2.0 Turbo Diesel 150 2018- Multilink rear 282mm front discs ATE FORD Focus Mk4 2.0 Turbo Diesel 150 2018- Multilink rear 308mm front discs ATE FORD Focus Mk4 Estate 1.0 Turbo 85 2018- ATE FORD Focus Mk4 Estate 1.0 Turbo 101 2018- ATE FORD Focus Mk4 Estate 1.0 Turbo 125 2018- ATE FORD Focus Mk4 Estate 1.0 Turbo hybrid 125 2020- ATE FORD Focus Mk4 Estate 1.0 Turbo hybrid 155 2020- ATE FORD Focus Mk4 Estate 1.5 Turbo 150 2018- ATE FORD Focus Mk4 Estate 1.5 Turbo 180 2018- ATE FORD Focus Mk4 Estate 1.5 Turbo Diesel 95 2018- ATE FORD Focus Mk4 Estate 1.5 Turbo Diesel 120 2018- ATE FORD Focus Mk4 Estate 2.0 Turbo Diesel 150 2018- ATE FORD Focus Active 1.0 Turbo 125 2018- ATE FORD Focus Active 1.0 Turbo hybrid 155 2021- ATE FORD Focus Active 1.5 Turbo 150 2018- ATE FORD Focus Active 1.5 Turbo 150 2018- Multilink rear 282mm front discs ATE FORD Focus Active 1.5 Turbo 150 2018- Multilink rear 308mm front discs ATE FORD Focus Active 1.5 Turbo 180 2018- ATE FORD Focus Active 1.5 Turbo 180 2018- Multilink rear 282mm front discs ATE FORD Focus Active 1.5 Turbo 180 2018- Multilink rear 308mm front discs ATE FORD Focus Active 1.5 Turbo Diesel 120 2018- ATE FORD Focus Active 2.0 Turbo Diesel 150 2018- ATE FORD Focus Active 2.0 Turbo Diesel 150 2018- Multilink rear 282mm front discs ATE FORD Focus Active 2.0 Turbo Diesel 150 2018- Multilink rear 308mm front discs ATE FORD Focus Active Estate 1.0 Turbo 125 2018- ATE FORD Focus Active Estate 1.0 Turbo hybrid 155 2021- ATE FORD Focus Active Estate 1.5 Turbo 150 2018- ATE FORD Focus Active Estate 1.5 Turbo Diesel 120 2018- ATE FORD Focus Active Estate 2.0 Turbo Diesel 150 2018- ATE FORD Kuga Mk3 1.5 Turbo 120 2019- ATE FORD Kuga Mk3 1.5 Turbo 150 2019- ATE FORD Kuga Mk3 1.5 Turbo Diesel 120 2019- ATE FORD Kuga Mk3 2.0 Turbo Diesel Hybrid 150 2019- ATE FORD Kuga Mk3 2.0 Turbo Diesel 190 2019- 4WD ATE FORD Puma Mk2 ST 1.5 Turbo 200 2021- ATE

Read more less

This brake pad also fits the following models, ensure you select correctly: Make Model Sub-Model Engine Engine Type BHP Year Special Comments Front Brake Caliper Type FORD Focus Mk4 1.0 Turbo 85 2018- ATE FORD Focus Mk4 1.0 Turbo 101 2018- ATE FORD Focus Mk4 1.0 Turbo 125 2018- ATE FORD Focus Mk4 1.0 Turbo hybrid 125 2020- ATE FORD Focus Mk4 1.0 Turbo hybrid 155 2020- ATE FORD Focus Mk4 1.5 Turbo 150 2018- ATE FORD Focus Mk4 1.5 Turbo 150 2018- Multilink rear 282mm front discs ATE FORD Focus Mk4 1.5 Turbo 150 2018- Multilink rear 308mm front discs ATE FORD Focus Mk4 1.5 Turbo 180 2018- ATE FORD Focus Mk4 1.5 Turbo 180 2018- Multilink rear 282mm front discs ATE FORD Focus Mk4 1.5 Turbo 180 2018- Multilink rear 308mm front discs ATE FORD Focus Mk4 1.5 Turbo Diesel 95 2018- ATE FORD Focus Mk4 1.5 Turbo Diesel 120 2018- ATE FORD Focus Mk4 2.0 Turbo Diesel 150 2018- ATE FORD Focus Mk4 2.0 Turbo Diesel 150 2018- Multilink rear 282mm front discs ATE FORD Focus Mk4 2.0 Turbo Diesel 150 2018- Multilink rear 308mm front discs ATE FORD Focus Mk4 Estate 1.0 Turbo 85 2018- ATE FORD Focus Mk4 Estate 1.0 Turbo 101 2018- ATE FORD Focus Mk4 Estate 1.0 Turbo 125 2018- ATE FORD Focus Mk4 Estate 1.0 Turbo hybrid 125 2020- ATE FORD Focus Mk4 Estate 1.0 Turbo hybrid 155 2020- ATE FORD Focus Mk4 Estate 1.5 Turbo 150 2018- ATE FORD Focus Mk4 Estate 1.5 Turbo 180 2018- ATE FORD Focus Mk4 Estate 1.5 Turbo Diesel 95 2018- ATE FORD Focus Mk4 Estate 1.5 Turbo Diesel 120 2018- ATE FORD Focus Mk4 Estate 2.0 Turbo Diesel 150 2018- ATE FORD Focus Active 1.0 Turbo 125 2018- ATE FORD Focus Active 1.0 Turbo hybrid 155 2021- ATE FORD Focus Active 1.5 Turbo 150 2018- ATE FORD Focus Active 1.5 Turbo 150 2018- Multilink rear 282mm front discs ATE FORD Focus Active 1.5 Turbo 150 2018- Multilink rear 308mm front discs ATE FORD Focus Active 1.5 Turbo 180 2018- ATE FORD Focus Active 1.5 Turbo 180 2018- Multilink rear 282mm front discs ATE FORD Focus Active 1.5 Turbo 180 2018- Multilink rear 308mm front discs ATE FORD Focus Active 1.5 Turbo Diesel 120 2018- ATE FORD Focus Active 2.0 Turbo Diesel 150 2018- ATE FORD Focus Active 2.0 Turbo Diesel 150 2018- Multilink rear 282mm front discs ATE FORD Focus Active 2.0 Turbo Diesel 150 2018- Multilink rear 308mm front discs ATE FORD Focus Active Estate 1.0 Turbo 125 2018- ATE FORD Focus Active Estate 1.0 Turbo hybrid 155 2021- ATE FORD Focus Active Estate 1.5 Turbo 150 2018- ATE FORD Focus Active Estate 1.5 Turbo Diesel 120 2018- ATE FORD Focus Active Estate 2.0 Turbo Diesel 150 2018- ATE FORD Kuga Mk3 1.5 Turbo 120 2019- ATE FORD Kuga Mk3 1.5 Turbo 150 2019- ATE FORD Kuga Mk3 1.5 Turbo Diesel 120 2019- ATE FORD Kuga Mk3 2.0 Turbo Diesel Hybrid 150 2019- ATE FORD Kuga Mk3 2.0 Turbo Diesel 190 2019- 4WD ATE FORD Puma Mk2 ST 1.5 Turbo 200 2021- ATE

Read more less

This brake pad also fits the following models, ensure you select correctly: Make Model Sub-Model Engine Engine Type BHP Year Special Comments Front Brake Caliper Type FORD Focus Mk4 1.0 Turbo 85 2018- ATE FORD Focus Mk4 1.0 Turbo 101 2018- ATE FORD Focus Mk4 1.0 Turbo 125 2018- ATE FORD Focus Mk4 1.0 Turbo hybrid 125 2020- ATE FORD Focus Mk4 1.0 Turbo hybrid 155 2020- ATE FORD Focus Mk4 1.5 Turbo 150 2018- ATE FORD Focus Mk4 1.5 Turbo 150 2018- Multilink rear 282mm front discs ATE FORD Focus Mk4 1.5 Turbo 150 2018- Multilink rear 308mm front discs ATE FORD Focus Mk4 1.5 Turbo 180 2018- ATE FORD Focus Mk4 1.5 Turbo 180 2018- Multilink rear 282mm front discs ATE FORD Focus Mk4 1.5 Turbo 180 2018- Multilink rear 308mm front discs ATE FORD Focus Mk4 1.5 Turbo Diesel 95 2018- ATE FORD Focus Mk4 1.5 Turbo Diesel 120 2018- ATE FORD Focus Mk4 2.0 Turbo Diesel 150 2018- ATE FORD Focus Mk4 2.0 Turbo Diesel 150 2018- Multilink rear 282mm front discs ATE FORD Focus Mk4 2.0 Turbo Diesel 150 2018- Multilink rear 308mm front discs ATE FORD Focus Mk4 Estate 1.0 Turbo 85 2018- ATE FORD Focus Mk4 Estate 1.0 Turbo 101 2018- ATE FORD Focus Mk4 Estate 1.0 Turbo 125 2018- ATE FORD Focus Mk4 Estate 1.0 Turbo hybrid 125 2020- ATE FORD Focus Mk4 Estate 1.0 Turbo hybrid 155 2020- ATE FORD Focus Mk4 Estate 1.5 Turbo 150 2018- ATE FORD Focus Mk4 Estate 1.5 Turbo 180 2018- ATE FORD Focus Mk4 Estate 1.5 Turbo Diesel 95 2018- ATE FORD Focus Mk4 Estate 1.5 Turbo Diesel 120 2018- ATE FORD Focus Mk4 Estate 2.0 Turbo Diesel 150 2018- ATE FORD Focus Active 1.0 Turbo 125 2018- ATE FORD Focus Active 1.0 Turbo hybrid 155 2021- ATE FORD Focus Active 1.5 Turbo 150 2018- ATE FORD Focus Active 1.5 Turbo 150 2018- Multilink rear 282mm front discs ATE FORD Focus Active 1.5 Turbo 150 2018- Multilink rear 308mm front discs ATE FORD Focus Active 1.5 Turbo 180 2018- ATE FORD Focus Active 1.5 Turbo 180 2018- Multilink rear 282mm front discs ATE FORD Focus Active 1.5 Turbo 180 2018- Multilink rear 308mm front discs ATE FORD Focus Active 1.5 Turbo Diesel 120 2018- ATE FORD Focus Active 2.0 Turbo Diesel 150 2018- ATE FORD Focus Active 2.0 Turbo Diesel 150 2018- Multilink rear 282mm front discs ATE FORD Focus Active 2.0 Turbo Diesel 150 2018- Multilink rear 308mm front discs ATE FORD Focus Active Estate 1.0 Turbo 125 2018- ATE FORD Focus Active Estate 1.0 Turbo hybrid 155 2021- ATE FORD Focus Active Estate 1.5 Turbo 150 2018- ATE FORD Focus Active Estate 1.5 Turbo Diesel 120 2018- ATE FORD Focus Active Estate 2.0 Turbo Diesel 150 2018- ATE FORD Kuga Mk3 1.5 Turbo 120 2019- ATE FORD Kuga Mk3 1.5 Turbo 150 2019- ATE FORD Kuga Mk3 1.5 Turbo Diesel 120 2019- ATE FORD Kuga Mk3 2.0 Turbo Diesel Hybrid 150 2019- ATE FORD Kuga Mk3 2.0 Turbo Diesel 190 2019- 4WD ATE FORD Puma Mk2 ST 1.5 Turbo 200 2021- ATE

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:70mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:76mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:83mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:90mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This filter is designed to be fitted to the outside of a rigid pipe such as a MAF sensor housing. These filters have an rubber polymer neck and a cone shaped filter element. This enables easy fitting to space-restricted engine compartments, whilst providing a large surface to maximise potential air flow. The filters are constructed using stainless steel cage internal and our famous 15mm thick twin layer foam.  Ramair universal filters are designed and manufactured for a very diverse range of applications and are made here in the UK. They are available in many different sizes and styles available.  Clean using our filter maintenance kit - CK-003 This product has the following dimensions: Filter Internal Neck Diameter: You choose Filter Neck Length: 23mm Filter Overall Height: 130mm Filter Base Width: 150mm Filter Top Width: 93mm Filter Material: 15mm Dual Layer Foam

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This filter is designed to be inserted into a flexible hose such as a rubber or silicone intake pipe. These filters have an aluminium ram-pipe neck and a cone shaped filter element. This integral cone channels all the incoming air, towards the inlet manifold, and in doing so, reduces unnecessary turbulence. These filters are also cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of pleated surface area an added boost of power to your engine too! These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of motorsport filtration the pleated range by Ramair is the premium choice on the market today for your fast road or track car. With its large size, technologically advanced filter and bell mouth alloy spun base this filter kit is capable of handling extremely large power & flow rates. Filter Outer Neck Diameter: Select Your Option Filter Neck Length: 45mm (1.8inch) Filter Overall Length: 185mm (7.3inch) Filter Base Width: 150mm (5.9inch) Filter Top Width: 120mm (4.7inch) Filter Material: Pleated Nanofibre Filter Base Material: Aluminium Filter Base Finish: Black Powder Coat

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

Genuine FORD Kit Tpms Sensor  Brand: FORD (OE Part) MPN: 2559459 Condition: New Supplied as 1 or a set of 4 Should fit most ford models with TPMS, however if you would like to confirm please contact us with your vehicle Reg

Read more less

Check out our 4D Number Plate Tags, Designed to be fitted with 4D number plates (but can be fitted to any UK Number plate) Available in any colour you want, with an array of logo's; again, in any colour you want! These simply stick to the left side of your number plate using the pre applied weatherproof backing tape! The tags are only 50mm wide meaning they are 100% legal in terms of sizing under UK number plate law. This listing is for one pair (2 tags) Customise: You choose the colour of your tag! You choose the logo / emblem You choose the orientation of the logo You choose the colour of the logo! Options: We've created 2 sizes, Option 1 is for vehicles who do not use a number plate holder or frame of any kind and just have the plate on the car, this is designed to stick on the left side of the plate and cover it fully. Option 2 is for vehicles which have a number plate frame / holder - is designed a bit smaller so that it fits inside and still gives you the desired look (See disclaimer below) Measurements: Option 1: H 110mm // W 50mm // T 3mm Option 2: H 100mm // W 47mm // T 3mm Want something Custom? Drop us an email to support@ceuk.org and our design team would love to help! Dislciamer: The full size option may not follow the corners of your number plate and may be larger - this is designed to be universal and fit all number plates, it will always cover the corner completely The smaller option may have a 1-2mm border between the tag and your frame, as all frames are different sizes this has been designed to be universal - see photo  

Read more less

Check out our 4D Number Plate Tags, Designed to be fitted with 4D number plates (but can be fitted to any UK Number plate) Available in any colour you want, with an array of logo's; again, in any colour you want! These simply stick to the left side of your number plate using the pre applied weatherproof backing tape! The tags are only 50mm wide meaning they are 100% legal in terms of sizing under UK number plate law. This listing is for one pair (2 tags) Customise: You choose the colour of your tag! You choose the logo / emblem You choose the orientation of the logo You choose the colour of the logo! Options: We've created 2 sizes, Option 1 is for vehicles who do not use a number plate holder or frame of any kind and just have the plate on the car, this is designed to stick on the left side of the plate and cover it fully. Option 2 is for vehicles which have a number plate frame / holder - is designed a bit smaller so that it fits inside and still gives you the desired look (See disclaimer below) Measurements: Option 1: H 110mm // W 50mm // T 3mm Option 2: H 100mm // W 47mm // T 3mm Want something Custom? Drop us an email to support@ceuk.org and our design team would love to help! Dislciamer: The full size option may not follow the corners of your number plate and may be larger - this is designed to be universal and fit all number plates, it will always cover the corner completely The smaller option may have a 1-2mm border between the tag and your frame, as all frames are different sizes this has been designed to be universal - see photo  

Read more less

Introducing the Enhanced Edition LED H7 Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in ANY H7 Fitments and replaces the OEM lamp unit for an ultra bright replacement. This bulb can be used as a dipped & high beam upgrade as well as a foglight. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! No longer any need for clips & caps! The bulb is designed to fit in any H7 fixing without any adjustments or additional items, and utilising its 4 point technology, this can be orientated in either 2 or 4 location points to ensure the best output and zero polarity issues! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H7 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H7 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped & high beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H8 or H11 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H8/11 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

For hydraulic brake and clutch systems. Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3) Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual. Min. dry boiling point 260°C. Min. wet boiling point 165°C Notice Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs. Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water.  DOT 4 Technical Info Contents 500 ml Colour Pale Amber Chemical basis Butoxyethanol Shelf life from production 36 Month Min. wet boiling point 165 °C Min. dry boiling point 260 °C Density 1.052 g/ml Density conditions at 20°C pH value 7-11

Read more less

Here we introduce to you our #Enhanced Edition H1 LED Upgrade. This product can NOT be used as a cornering light! Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. Unlike other suppliers, CEUK has developed an LED bulb which does not require the splicing of wires and difficult intricate clips to hold the lamp in place. This unit fits in its entirety as an OEM H1 Halogen bulb would. The LED's come as standard 6000K ice white,  Its worth noting that due to the design of headlamps, different lamps and light units may give different results to those found in our pictures. Good to know. High Lumen Output Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 20,000 (10,000 Per Bulb) What's in the box 2x H1 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb V3 This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Will fit in any vehicle which takes a H8 or H11 fitting provided you have about 1 inch of space behind the bulb! Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H8/11 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.   

Read more less