Performance - Hyundai i20N (BC3) 2021-Present

The latest Smartstream 1.6 T-GDi engines fitted to Hyundai's i20 N and other models do not use a MAF sensor which means that you can vent to atmosphere for that blow-off sound, if you like, without causing any driveability issues or 'Check Engine' lights. This Deceptor Pro 2 TMS valve features dual-outlets with a full bias adjustment system that allows you to control the venting bias to your taste immediately and directly from the driver's seat. Make Model Mark Variant EngineCodes FuelType YearFrom YearTo Hyundai i20 BC3 N 1.6 T-GDI Smartstream Petrol 2021 2024     Dual outlets with patented Venting Bias Adjustment - can be infinitely adjusted between full recirc (silent) and full atmosphere (loud) Change the venting bias electronically from the driver’s seat using the in-cabin controller TMS Technology for up to 30% faster boost recovery on gearshift Wiring loom included, only requires 12V power supply Huge range of direct bolt-on kits 100psi+ boost holding ability Manufactured in Australia in accordance with ISO 9001 Go on, admit it. There are times you wish you could have that signature turbo blow off sound, but you’re not prepared to listen to it all the time. GFB’s Deceptor Pro II delivers just what you need – the ability to control how loud your BOV sound is, from the driver’s seat. To top it off, if your car typically suffers issues such as backfiring and stalling when venting more than a certain percentage of air to atmosphere, the controller can easily be configured to limit the maximum venting ratio. This way, you can achieve a blow-off sound without having to put up with the issues. Complete range of fitment options The Deceptor Pro II direct fit bolt-on range covers a huge list of popular vehicles. You can also purchase a variety of hose and flange adaptors for custom fitments.

Read more less

Suitable for: Hyundai i20 BC Front Wheel Drive (2020 and later) Following on from our highly successful offering for the Hyundai i30N, ITG are pleased to announce the launch of our new cold air induction system for the Hyundai i20N. The i20 N is powered by a 1.6-litre turbocharged GDi engine with six-speed manual transmission (6MT)that boasts a max power of 204ps.Choose between our Trusted TriFoam Maxogen filter or our exciting new Pleated Cotton Gauze filter, to replace your restrictive standard airbox design.ITG also offer an additional silicone intake hose upgrade, which smooths & accelerates airflow through the inlet tract into the turbocharger. Our Silicone Hose has been optimised for use with the ITG Induction System, but also fits onto the standard airbox. By upgrading to the ITG hose, a notable increase in intake noise is also found; as unlike the OE hose the ITG part does not feature a restrictive noise silencer chamber.Available to purchase separately or as part of a full induction system  Will an ITG ProFilter increase performance? Yes, an ITG ProFilter can increase performance. It is a high-flow air filter upgrade designed to fit inside the car’s existing airbox. It is designed to provide better filtration than a standard paper air filter while offering a larger open surface area. This can result in increased horsepower, torque, and improved throttle response. Is there an environmental benefit to using an ITG ProFilter? Another critical benefit to note is the environmental one. The ITG ProFilter is designed to be reusable, whereas a single-use paper filter is not. When you replace a single-use paper filter, you are throwing away a filter that is only partially used. With a cleanable filter, you can reuse the filter many times, reducing the amount of waste produced.Second, cleanable air filters can save energy. When a dirty air filter is used, it can restrict airflow to the engine. This can cause the engine to work harder, decreasing fuel efficiency and increasing emissions. A cleanable filter can help keep the engine running smoothly and efficiently, saving fuel and reducing emissions.

Read more less

This is a replacement panel filter for Hyundai Bayon and i20. For a full list of fitments see compatibility chart. Features High Performance, MAF Safe, twin layer, fully reticulated foam Fits in the OEM Airbox and replaces inefficient paper filter Easy to clean using our filter maintenance kit - CK-003 Stainless steel cage support structure Guaranteed surface area using high quality custom blended polymer What Does It Do? The Ramair Panel Filter range is made from twin core Ramair Aeriform foam and our stainless steel cage which is used in many of our tier 1 Motorsport applications for maximum strength. A rubber polymer surround gives a fantastic clean and smooth finish with longevity in mind. These filters are direct replacements for the OEM air filter in your car, making this filter easy to fit and maintain. Ramair twin core foam is unique and like no other in the market. Our foam is designed to give maximum dust filtration along with optimum performance. Filter Length: 249mm Filter Width: 146mm Filter Shape: Rectangle Filter Material: 15mm Dual Layer Foam MAKE MODEL ENGINE YEAR Hyundai i20 1.0 T-Gdi 2016+ Hyundai i20 1.2 2014+ Hyundai i20 1.4 2014+ Hyundai i20 1.0 T-GDI hybrid 48V 2020+ Hyundai i20 1.2 LPG 2019-2020 Hyundai i20 1.2 LPGI 2014-2019 Hyundai i20 1.2 MPi 2015+ Hyundai i20 1.2 MPi iVT 2020+ Hyundai i20 1.4 CRDi 2014+ Hyundai i20 1.4 MPi 2014+ Hyundai i20 N 1.6 T-GDi N 2020+ Hyundai Bayon 1.0 T-Gdi 2021+ Hyundai Bayon 1.0 T-GDI 48V-Hybrid 2021+ Hyundai Bayon 1.2 LPG 2023+ Hyundai Bayon 1.2 MPi 2023+  

Read more less

As part of our expanding Hyundai platform product range, AIRTEC Motorsport is proud to launch our oil cooler kit for the i20N model. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s oil cooling ability for modified i20N owners who struggle to maintain steady oil temperatures on track, or during fast road use. With vast experience in developing uprated oil cooler packages for a variety of modified track and road cars, the challenge with this kit was to integrate a large capacity, external oil cooler neatly behind the bumper with the limited space available. As a result, our kit includes a bespoke oil cooler design with the mounting brackets welded into position to ensure the perfect fitment. The comprehensive package also includes high quality braided hose lines with Aerotec fittings and mounting brackets to route the lines, a CNC-machined sandwich plate and all fixtures and fittings, including instructions for a bolt-on installation. The kit is designed to integrate seamlessly with the car’s existing features although minor drilling is required. Its improved cooling efficiency and easy fitment makes it an essential modification for all modified i20N models. PLEASE NOTE: There is the option of either FOUR bolt or FIVE bolt oil modine/sandwich plates. If you car is a potential crossover (late 2022/early 2023) then we advise you check the one on your car.  2021 models: Five bolt2022 models: Five bolt2023 models: Four bolt2024 models: Four bolt  Features: Comprehensive kit designed specially for the i20N platform Four or Five bolt oil modine/sandwich plate Reduces temperatures on track and road Designed and developed in the UK Bespoke large capacity external oil cooler with built-in brackets  CNC-machined sandwich plate for the i20N model High-quality hoses and fittings Includes all fixtures and detailed fitting instructions AIRTEC part no: ATMSHYU11

Read more less

As part of our expanding Hyundai product range, AIRTEC Motorsport is proud to launch our enlarged turbo inlet elbow upgrade for the i20N, suitable for track or fast road use. A direct replacement part that offers increases in performance and response, the enlarged turbo inlet elbow features a freer-flowing design with an increased internal diameter. How it worksThe original elbow begins at 43mm from the turbo inlet and gradually tapers up to just 53mm in diameter as it reaches the induction pipe work. This causes an unnecessary restriction within the intake side that hampers flow and limits throttle response. Our AIRTEC Motorsport direct replacement cast aluminium elbow gently tapers from the turbo inlet out to a huge 76mm diameter, an increase of over 50% compared to the original and an increase of 106% in cross-sectional area. This increased volume and improved design works to reduce restriction and improve flow to the turbo.   The kit also comes with a 76mm silicone hose ensuring the diameter is maintained all the way to the air box, and includes all fixtures and fittings, as well as detailed instructions. Finished in powder coated black with a AIRTEC Motorsport cast logo, this uprated elbow upgrade offers a great benefit for modified i20N owners. Features:  50% increase in inlet diameter 106% increase in cross-sectional area Larger, freer-flowing design Improves air flow to the turbo Increases throttle response Direct replacement fitment Made from cast aluminium High-quality powder coat black finish Includes all fixtures and a detailed fitting guide

Read more less

As part of our expanding Hyundai product range, AIRTEC Motorsport is proud to launch our enlarged turbo inlet elbow upgrade for the i20N, suitable for track or fast road use. A direct replacement part that offers increases in performance and response, the enlarged turbo inlet elbow features a freer-flowing design with an increased internal diameter. How it worksThe original elbow begins at 43mm from the turbo inlet and gradually tapers up to just 53mm in diameter as it reaches the induction pipe work. This causes an unnecessary restriction within the intake side that hampers flow and limits throttle response. Our AIRTEC Motorsport direct replacement cast aluminium elbow gently tapers from the turbo inlet out to a huge 76mm diameter, an increase of over 50% compared to the original and an increase of 106% in cross-sectional area. This increased volume and improved design works to reduce restriction and improve flow to the turbo.   The kit also comes with a 76mm silicone connector, ensuring the diameter is maintained to the induction pipe, and includes all fixtures and fittings, as well as detailed instructions. Finished in powder coated black with a AIRTEC Motorsport cast logo, this uprated elbow upgrade offers a great benefit for modified i20N owners. Features:  50% increase in inlet diameter 106% increase in cross-sectional area Larger, freer-flowing design Improves air flow to the turbo Increases throttle response Direct replacement fitment Made from cast aluminium  High-quality powder coat black finish Includes all fixtures and a detailed fitting guide AIRTEC Part No: ATMSHYU17

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

TS: Make Model Mark Variant FuelType YearFrom YearTo Hyundai i20 BC3 N 1.6 T-GDI Smartstream Petrol 2021 2024   The latest Smartstream 1.6 T-GDi engines fitted to Hyundai's i20 N and other models do not use a MAF sensor which means that you can vent to atmosphere for that blow-off sound, if you like, without causing any driveability issues or 'Check Engine' lights. This Respons TMS valve features dual-outlets with a full bias adjustment system that allows you to simply twist the adjustment ring on the valve body to alter the sound to your taste. All the performance with or without the noise! If cars like yours typically suffer issues such as backfiring and stalling when using a fixed-ratio atmosphere-venting BOV, the Respons can help. By adjusting the venting bias to suit the car you can achieve a blow-off sound without having to put up with the issues. Like all GFB valves, the Respons utilises GFB’s proven TMS Technology to ensure rapid boost recovery on gearshift and optimum throttle response, as well as the ability to withstand boost pressures of 100psi+. Put simply, it can hold more boost than any turbo could produce. How GFB’s patented venting bias adjustment works Twisting the adjusting ring opens up the atmo port, whilst the recirc port is simultaneously closed.This results in possible venting ratios ranging from 100% recirc, right through to 100% atmosphere and anywhere in between. Complete Range of Fitment Options The Respons direct fit bolt-on range covers a huge list of popular vehicles. You can also purchase a variety of hose and flange adaptors for custom fitments. Performance AND sound without compromise! Patented Venting Bias Adjustment system - can be infinitely adjusted between full recirc (silent) and full atmosphere (loud) Change the venting bias simply by twisting the adjustment ring TMS Technology for up to 30% faster boost recovery on gearshift Huge range of direct bolt-on kits 100psi+ boost holding ability Manufactured in Australia in accordance with ISO 9001

Read more less

FITS: Make Model Mark Variant FuelType YearFrom YearTo Hyundai i20 BC3 N 1.6 T-GDI Smartstream Petrol 2021 2024 The latest Smartstream 1.6 T-GDi engines fitted to Hyundai's i20 N and other models do not use a MAF sensor which means that you can vent to atmosphere for that blow-off sound, if you like, without causing any driveability issues or 'Check Engine' lights. However, this Mach 2 valve is for those who want all the performance of the GFB TMS valve technology without any of the noise. That said, Mach 2 gives you the freedom to fit an optional Atmospheric Venting Conversion kit at a later date to give you all the sound so you don't need to buy a new valve.       Simply add an Atmospheric Conversion Kit for maximum noise (available separately). All the Performance With or Without the Noise! GFB’s Mach 2 utilises GFB’s proven TMS Technology to ensure rapid boost recovery on gearshift and optimum throttle response, as well as the ability to withstand boost pressures of 100psi+. Put simply, it can hold more boost than any turbo could produce. With its single venting outlet, the Mach 2 is configured from the factory for full recirculation (i.e. plumb back, diverter, bypass) venting for the performance-minded who just want the benefits without the sound. Single venting outlet, factory configured for full recirculating operation Configure for full atmosphere venting with separate atmosphere conversion kit TMS Technology for up to 30% faster boost recovery on gearshift Huge range of direct bolt-on kits 100psi+ boost holding ability Manufactured in Australia in accordance with ISO 9001   Complete Range of Fitment Options The Mach 2 direct bolt-on range covers a huge list of popular vehicles. You can also purchase a variety of hose and flange adaptors for custom fitments.

Read more less

To Suit Hyundai and Kia Smartstream G4FP engines FITS: Make Model Mark Variant FuelType YearFrom YearTo Hyundai i20 BC3 N 1.6 T-GDI Smartstream Petrol 2021 2024 The latest Smartstream 1.6 T-GDi engines fitted to Hyundai's i20 N and other models do not use a MAF sensor which means that you can vent to atmosphere for that blow-off sound, if you like, without causing any driveability issues or 'Check Engine' lights. The Hybrid TMS features dual outlets for full recirculation, 50/50, or full atmosphere venting. Configured with the supplied plugs for 3-stage sound control.       Want it loud? Quiet? In between? GFB Hybrid kits include a pair of blanking plugs that allow the valve to be configured for full recirculation venting, 50/50 (atmosphere / recirc), or full atmosphere venting. All the Performance with the Noise! The Hybrid valve is back! In 1999, GFB’s first Hybrid valve pioneered the dual port design, which was so successful the technology has since been adopted by most other brands. By “staging” the two venting outlets, at low valve lifts most of the air is recirculated. As the car is driven harder, the valve opens further and more of the atmosphere venting port is exposed for a louder sound. As a benefit, this system makes it possible to use these valves on cars with sensitive airflow meters that often suffer issues such as backfiring and/or stalling, whilst still achieving the signature blow-off sound. Dual staged venting outlets, can be configured for full recirc, 50/50, or full atmosphere operation using plugs provided TMS Technology for up to 30% faster boost recovery on gearshift Huge range of direct bolt-on kits 100psi+ boost holding ability Manufactured in Australia in accordance with ISO 9001   Complete Range of Fitment Options The Hybrid direct fit bolt-on range covers a huge list of popular vehicles. You can also purchase a variety of hose and flange adaptors for custom fitments.

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

Introducing the Enhanced Edition LED H7 Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in ANY H7 Fitments and replaces the OEM lamp unit for an ultra bright replacement. This bulb can be used as a dipped & high beam upgrade as well as a foglight. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! No longer any need for clips & caps! The bulb is designed to fit in any H7 fixing without any adjustments or additional items, and utilising its 4 point technology, this can be orientated in either 2 or 4 location points to ensure the best output and zero polarity issues! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H7 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H7 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped & high beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H8 or H11 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H8/11 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

For hydraulic brake and clutch systems. Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3) Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual. Min. dry boiling point 260°C. Min. wet boiling point 165°C Notice Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs. Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water.  DOT 4 Technical Info Contents 500 ml Colour Pale Amber Chemical basis Butoxyethanol Shelf life from production 36 Month Min. wet boiling point 165 °C Min. dry boiling point 260 °C Density 1.052 g/ml Density conditions at 20°C pH value 7-11

Read more less

Valve delete module - plugs into exhaust valve plug when a vehicle is fitted with a none valved system Please note, this product fits multiple models. Focus RS MK3A-Class A35 AMG W177 Hatchbacki20 N

Read more less

Bespoke Custom Design Mudflaps to fit:Hyundai i20N / N-Line Hatchback VersionDesigned and made to order here in the UK by us 'The rallyflapZ Team' *ShortieZ* - Protection without the full Rally Look! ShortieZ are our latest design, They do not stick out / hang as low as our rallyflapZ Version Mudflaps! Designed for Looks & Protection Only the Best Materials used Easy Installation Long Lasting Exceptional Flexibility Impact Resistance HYUNDAI I20N / N-LINE HATCHBACK - KIT INCLUDES:Front Fixing Kit Contents:2 x Front Mud Flaps2 x Laser-Cut Stainless Steel Brackets (Black Powder Coated) & All Fixings RequiredRear Fixing Kit Contents:2 x Rear Mud Flaps2 x Laser-Cut Stainless Steel (Black Powder Coated) & All Fixings required Avoid expensive re-sprays and get some protection now against Road Grit, Mud, Dirt & GreaseOur rallyflapZ / ShortieZ offer outstanding durability when compared to conventional OEM hard plastic or moulded Mudflaps, You can be assured that with our rallyflapZ come peace of mind that they can be exposed to the harshest weather conditions without any danger of corrosion.MATERIALS 4mm Thick PVC (Gloss) - Perfectly fine for everyday road use - High Quality with a Gloss Finish 4mm Thick PVC (Satin) - Perfectly fine for everyday road use - High Quality with a Satin / Matt-like FinishLOGO'SOur Logo's are a High quality vinyl material which is applied once the Mud Flaps have been cut to shape and sanded.The Vinyl is long lasting once applied to the mud flap material - however in the event of peeling or damage to them - we offer a life time guarantee on them!

Read more less

  Bespoke Custom Design Mudflaps to fit:Hyundai i20N Hatchback Designed and made to order here in the UK by us 'The rallyflapZ Team'   Designed for Looks & Protection Only the Best Materials used Easy Installation Long Lasting Exceptional Flexibility Impact Resistance HYUNDAI i20N KIT INCLUDES:2 x Front Mudflaps2 x Rear Mudflaps4 x Laser Cut, Stainless Steel - Powder Coated Satin Black Brackets All Fixing Hardware Required(The plugs provided are very strong and are difficult to remove once inserted)Avoid expensive re-sprays and get some protection now against Road Grit, Mud, Dirt & GreaseOur rallyflapZ offer outstanding durability when compared to conventional OEM hard plastic or moulded Mudflaps, You can be assured that with our rallyflapZ come peace of mind that they can be exposed to the harshest weather conditions without any danger of corrosion.MATERIALS 4mm Thick PVC (Gloss) - Perfectly fine for everyday road use - High Quality with a Gloss Finish 4mm Thick PVC (Satin) - Perfectly fine for everyday road use - High Quality with a Satin / Matt-like Finish LOGO'S Our Logo's are a High quality vinyl material which is applied once the Mud Flaps have been cut to shape and sanded.The Vinyl is long lasting once applied to the mud flap material - however in the event of peeling or damage to them - we offer a life time guarantee on them!

Read more less

PFC13-14 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 13-14mm --- PFC15-16 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 15-16mm --- PFC17-18 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 17-18mm --- PFC19-20 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 19-20mm --- PFC21-22 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 21-22mm --- PFC23-24 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 23-24mm --- PFC25-27 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 25-27mm --- PFC28-30 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 28-30mm --- PFC31-33 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 31-33mm

Read more less

A set of 4 ultra-high performance brake lines for the Hyundai i20N. These are a direct replacement/upgrade for the OEM brake line set and require no further modifications to fit. Hosetechnik lines are hand-finished with Teflon-lined braided stainless steel bodies and custom-machined stainless fittings, resulting in a brake hose that will perform under the most extreme and harsh conditions, whilst still looking good and performing at the highest level. They are available in multiple hard-wearing PVC sleeve colours, which look amazing, and protect against dirt and water ingress.Our hoses eliminate all the problems associated with standard OE lines Immediate brake pedal response Lifetime Warranty Choice of colour Reduces pedal sponginess under hard braking Compatible with all brake fluids Will not corrode  

Read more less

Here we introduce to you our #Enhanced Edition H1 LED Upgrade. This product can NOT be used as a cornering light! Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. Unlike other suppliers, CEUK has developed an LED bulb which does not require the splicing of wires and difficult intricate clips to hold the lamp in place. This unit fits in its entirety as an OEM H1 Halogen bulb would. The LED's come as standard 6000K ice white,  Its worth noting that due to the design of headlamps, different lamps and light units may give different results to those found in our pictures. Good to know. High Lumen Output Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 20,000 (10,000 Per Bulb) What's in the box 2x H1 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

A direct replacement that offers increases in response and sound by eliminating the internal sound suppressors built into the original boost pipe from the turbo. Technical Data As part of our expanding Hyundai product range, AIRTEC Motorsport is proud to launch our de-res hose upgrade for the i20N suitable for track or fast road use. A direct replacement part that gives increases in response and sound by eliminating the internal sound suppressors built into the original boost pipe from the turbo. Hyundai fit these suppressors to reduce noise and resonation but by replacing the pipe for one without the baffled internals, flow and internal capacity is improved, as well as noise. This increases throttle response and heightens the soundtrack from within the car. The kit includes a machined aluminium connector, a high-quality Pro Hoses silicone hose and the installation package includes all fixtures and fitting instructions. With valuable performance gains and an improved soundtrack, the AIRTEC Motorsport de-res pipe kit is an essential modification. Features:  Increases response and sound Larger capacity and freer-flowing design Improves flow from turbo Direct replacement fitment High quality aluminium connector Includes all fixtures and fittings Features detailed fitting guide Registered Design Right Number: Application Pending AIRTEC part no: ATMSHYU7

Read more less

As part of our expanding Hyundai product range, AIRTEC Motorsport is proud to launch our cold side big boost pipe kit upgrade for the i20N suitable for track or fast road use. A direct replacement that offers increases in performance and response, our enlarged cold side boost pipe kit replaces the hoses from the intercooler to the throttle body with a freer-flowing design that offers increased internal capacity. The original hose is 53mm in diameter and follows a series of relatively tight bends. We developed an enlarged hose kit that measures 63mm from beginning to end, offering a significant internal capacity increase of 19%. It also features fewer tight bends to further reduce restriction and improve flow, providing an increase in power and response. Made from high quality aluminium, the kit includes our own 63mm throttle body flange, Pro Hoses silicone connectors and all pipework is finished in powder-coated black for a subtle OEM+ look. The installation package includes all fixtures and fittings, and detailed instructions. With valuable performance gains and an improved look to the engine bay, the AIRTEC Motorsport enlarged boost pipe kit is an essential modification. Specification: 19% increase in internal volume Larger and freer-flowing design Comprehensive three-piece kit Improves flow from intercooler to throttle body Increases mid-range performance Direct replacement fitment Made from high quality aluminium Powder-coated black finish Includes all fixtures and fittings Features detailed fitting guide AIRTEC Part No: ATMSHYU8

Read more less

Following an extensive development process, AIRTEC Motorsport are proud to launch our auxiliary turbo radiator aimed at modified i20N owners who require further cooling to maintain steady running temperatures on track or fast road use. Developed in-house at AIRTEC HQ in the UK, we have huge experience designing a range of highly effective heat exchangers, intercoolers and radiators to help performance and tuned cars sustain safe operating temperatures during periods of hard use both on the track or road. This turbo radiator plumbs into the car’s existing cooling system directly after the turbo to help cool the extreme heat build up in this area before is passes back into the system. By working alongside the original radiator, this works to improve the car’s overall cooling capacity and ability, helping it to maintain a steady coolant temperature at all times. It fits neatly inside the space by the gearbox and features a scoop to direct air from under the car to pass through the core. It also features a pre-cut mesh shield to protect it from road debris. This can fit with any of our intercooler or oil cooler combinations to create the ultimate cooling package. The comprehensive kit also features laser-cut and powder-coated brackets, high-quality Pro Hoses silicone lines covered with an outer protective heat sleeving, as well as all fixtures and fittings, as well as detailed fitting instructions. Features: Designed and developed in the UK specifically for the i20N Improves car’s cooling capacity and ability Ducting channels air in from underneath the car Bespoke laser-cut and powder coated brackets High-quality Pro Hoses silicone lines with protective heat sleeving Fits with all intercooler and oil cooler kits to create the ultimate cooling package Comprehensive kit with all fixtures, fittings and instructions AIRTEC part no: ATMSHYU14

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb V3 This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Will fit in any vehicle which takes a H8 or H11 fitting provided you have about 1 inch of space behind the bulb! Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H8/11 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.   

Read more less