Performance - Hyundai i30 (PD) 2017 - Present
ITG Filters ITG - Air Filter Hyundai i30N. Kona, Veloster
BH-330 is one of ITG’s high-flow TriFoam (three-layer) air filter upgrades designed to fit inside the vehicle’s existing airbox. It is designed to provide better filtration than a standard paper air filter while offering a larger open surface area. This can result in increased horsepower, torque, and improved throttle response. AIR fILT Make Model Variant Year(s) Engine Code BHP Quantity Required Hyundai i30 N 2.0, 2.0 Performance 09/2017- 250, 275 1 Hyundai Kona N Performance 07/2021- . 280 1 Hyundai Veloster N 2.0 Turbo 2019- . 250, 275 1 As with all ITG’s products, BH-330 is designed to be reusable, whereas single-use paper filters are not. With a cleanable filter, you can reuse it many times, reducing the amount of waste produced. This filter can also help keep the engine running smoothly, save fuel and reduce emissions. When a dirty air filter is used, it can restrict airflow to the engine. This can cause the engine to work harder, thus decreasing fuel efficiency and increasing emissions.
£96.00
RamAir RamAir Performance Air Filter - Hyundai I30 & Kia Ceed
This is a replacement panel filter for the Hyundai i30 & Kia Ceed. For full list of fitments see compatibility chart. Features High Performance, MAF Safe, twin layer, fully reticulated foam Fits in the OEM Airbox and replaces inefficient paper filter Easy to clean using our filter maintenance kit - CK-003 Stainless steel cage support structure Guaranteed surface area using high quality custom blended polymer What Does It Do? The Ramair Panel Filter range is made from twin core Ramair Aeriform foam and our stainless steel cage which is used in many of our tier 1 Motorsport applications for maximum strength. A rubber polymer surround gives a fantastic clean and smooth finish with longevity in mind. These filters are direct replacements for the OEM air filter in your car, making this filter easy to fit and maintain. Ramair twin core foam is unique and like no other in the market. Our foam is designed to give maximum dust filtration along with optimum performance. Filter Length: 267mm (10.5inch) Filter Width: 145mm (5.7inch) Filter Shape: Unique Filter Material: Dual Layer Foam Fitment Compatibility Chart This product fits the following: MAKE MODEL ENGINE YEAR Hyundai Elantra 1.6 2011-2016 Hyundai i30 1.4 CRDi 2011+ Hyundai i30 1.6CRDi 2010+ Hyundai i30 1.6CRDi VGT 2007-2011 Hyundai i30 1.6 T-GDi 2015+ Kia Ceed 1.0 T-GDI 2015-2018 Kia Ceed 1.4 CRDi 2015-2018 Kia Ceed 1.6 CRDi (110/128/136) 2012-2018 Kia Ceed 1.6 GT 2013-2018 Kia Pro Cee'd 1.0 T-GDI 2015-2018 Kia Pro Cee'd 1.4 CRDi 2013-2018 Kia Pro Cee'd 1.6 CRDi (110/128/136) 2012-2018 Kia Pro Cee'd 1.6 GT 2013-2018
£37.00£35.15
Scorpion Scorpion Exhausts - Hyundai i30N / Kona N Performance Front Flex Pipe
Scorpion Exhausts Hyundai FITS: i30 Fastback N (GPF Model) i30 N (GPF Model) Kona N Fits Years 2019 to 2025 Fits to OEM / Scorpion cat Pipe Diameter 76mm/3 Formed in the late 60’s South Koreas largest car manufacturer Hyundai had a reputation of producing middle of the road family saloons but all that changed with the formation of the Hyundai Motorsport division. Debuting in WRC during 2014 they were soon on the podium and progressed to win back-to-back manufacturers titles, keen to transfer this success and knowledge gained through motorsport to the road Hyundai’s N division was formed and in 2018 unleashed the marques first true hot hatch the i30N. The success of the i30N saw EXCELR8 Motorsport introduce Hyundai to the BTCC in 2020 where they’ve enjoyed continued success and with Scorpions involvement ensures true track to road technology transfer. Our top technicians have developed a 76mm/3” T304 stainless steel, non-resonated GPF-back exhaust system for the Hyundai 130n. The exhaust system has been acoustically designed to eliminate drone but also provide a deep sporty Scorpion soundtrack throughout the rev range. The GPF-back system features an active exhaust valve which is operated by the driver using drive mode select button inside the car. Buyers can customise the appearance of their system by choosing from five tailpipe options. 114mm Ascari Carbon Fibre, Daytona and Indy tailpipes both available in polished and black ceramic finishes. Driver’s wanting additional performance with an enhanced soundtrack can look at adding the GPF delete section to their setup. Our technicians have precisely designed the GPF delete to be fully interchangeable with both the OEM and Scorpion GPF-back exhausts. Two variants have been developed, a resonated version that is perfectly suited for pairing with the Scorpion GPF-back and a non-resonated option for partnering with the OEM GPF-back. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SHYP103 Product Type Flex Pipe Fitment Years 2017 - 2018 Fits To OEM / Scorpion Model Fitment i30N Performance (Non GPF model) Pipe Diameter 76mm/3" * Shipping Dimensions 58cm x 33cm x 16cm OEM Scorpion Change Weight Difference 2.4 KG 2.3 KG -0.1 KG
£199.50£179.55
Maxton Design Maxton Design - Front Bumper Wings (Canards) Hyundai I30 N Mk3
Front Bumper Wings (Canards) Hyundai I30 N Mk3 FITS ONLY:Hyundai I30 N Hatchback Mk3 2017 - 2020Hyundai I30 N Fastback Mk3 2017 - 2020** Product made in a 3d printer **** This product requires treatment before assembly (primer, varnish) ** COMPLETE SET CONTAINS: -> CANARDS Product is made from ABS plastic. Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox
£89.00
PlexiClick® - Invisible Number Plate Holder Clip
This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily
£10.00
Pro Props Pro Props Carbon Fibre Bonnet / Boot / Door Show Prop
Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)
£69.99
Enhanced Edition LED H7 Mini
Introducing the Enhanced Edition LED H7 Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in ANY H7 Fitments and replaces the OEM lamp unit for an ultra bright replacement. This bulb can be used as a dipped & high beam upgrade as well as a foglight. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! No longer any need for clips & caps! The bulb is designed to fit in any H7 fixing without any adjustments or additional items, and utilising its 4 point technology, this can be orientated in either 2 or 4 location points to ensure the best output and zero polarity issues! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H7 fitting Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H7 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£54.00£42.00
Enhanced Edition LED H8/11 Mini Fog Unit
Description Introducing the Enhanced Edition LED H8/11 Fog Bulb Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped & high beam upgrade Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H8 or H11 fitting Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H8/11 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£42.00
Wurth Wurth Brake Fluid - Dot4 500ml
For hydraulic brake and clutch systems. Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3) Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual. Min. dry boiling point 260°C. Min. wet boiling point 165°C Notice Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs. Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water. DOT 4 Technical Info Contents 500 ml Colour Pale Amber Chemical basis Butoxyethanol Shelf life from production 36 Month Min. wet boiling point 165 °C Min. dry boiling point 260 °C Density 1.052 g/ml Density conditions at 20°C pH value 7-11
£10.00
forge Motorsport Hyundai i30N MK3.5 Facelift & Kona N Turbo Inlet Adaptor - Forge Motorsport
Product Description THIS WILL ONLY FIT 4" INTAKES - THIS WILL NOT FIT THE STOCK AIRBOX. THIS WILL ONLY FIT THE MK3.5 FACELIFT I30N With Forge leading the way in aftermarket products for the new Hyundai’s, we are proud to present our turbo inlet adaptor for the MK3.5 i30N. After investigation we found the new turbo to be larger on the latest MK3.5 I30N giving even more reason to have this superb product as the newly refreshed design needs to flow even more air than its predecessor. After stage one or two tunes the performance yields are even greater than the previous model with even better driving response and improved higher end BHP gains. Redesigned and developed by our highly skilled team on Solidworks CAD system the all billet turbo adaptor and high flow silicone inlet pipe is proven to benefit the engines performance. With one of the weak links on the i30N and intake system being the restrictive aluminium inlet pipe we found something more was needed on stage 1 and 2 tuned vehicles. You cannot go wrong with Forge Motorsport hardware on your tuned Hyundai, the results speak for themselves. Mated to our 4” intake and high performance filter (FMINDK28) the gain from the turbo adaptor alone was 10BHP, and, along with a gain in torque, it really transforms your driving experience. The power can be felt from just above 3000 RPM and helps keep a hard consistent pull all the way to the rev limiter. Designed in a similar way to a conventional velocity stack, it routes the air more directly into your turbo charger and allows more air to be compressed due to its larger capacity. Testing was completed on a Maha independent dyno, manufactured by the same people who currently supply BMW M sport and Mercedes Benz for all of their engine calibration and dyno testing. The Forge turbo inlet adaptor and high flow inlet pipe has a capacity of more than 150% over the stock item. Not only will you notice the increased performance, but also a slight change in your engine acoustics can be heard. As with all Forge motorsport products we offer a no quibble lifetime guarantee on both the silicone hose and billet adaptor. Will this fit other intakes? The answer is yes, it will fit other manufacturers intakes that have an inlet pipe of 102mm (4”). This will not fit the OEM. This is a simple installation and a modification that releases even more power from the Hyundai`s motor and fitting takes typically around 45 minutes and includes a full set of comprehensive installation instructions. Manufactured from 6082 aerospace grade aluminium Black anodised for ultimate protection and durability Increased capacity of over 150% No engine check lights (EML) Perfect fit with our induction kit Increased air flow Hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. Made in the UK Lifetime warranty
£142.79
Rally Flapz shortieZ | Mud Flaps to fit i30N (Hatchback) PFL 2017-2020
Bespoke Custom Design Mudflaps to fit:Hyundai i30N Hatchback Version (will NOT fit the 2021+ Face Lift Models)Designed and made to order here in the UK by us 'The rallyflapZ Team' *ShortieZ* - Protection without the full Rally Look! ShortieZ are our latest design, They do not stick out / hang as low as our rallyflapZ Version Mudflaps! Designed for Looks & Protection Only the Best Materials used Easy Installation Long Lasting Exceptional Flexibility Impact Resistance HYUNDAI I30N HATCHBACK - KIT INCLUDES:Front Fixing Kit Contents:2 x Front Mud Flaps2 x Laser-Cut Stainless Steel Brackets & All Fixings RequiredRear Fixing Kit Contents:2 x Rear Mud FlapsAll Fixings required Avoid expensive re-sprays and get some protection now against Road Grit, Mud, Dirt & GreaseOur rallyflapZ / ShortieZ offer outstanding durability when compared to conventional OEM hard plastic or moulded Mudflaps, You can be assured that with our rallyflapZ come peace of mind that they can be exposed to the harshest weather conditions without any danger of corrosion.MATERIALS 4mm Thick PVC (Gloss) - Perfectly fine for everyday road use - High Quality with a Gloss Finish 4mm Thick PVC (Satin) - Perfectly fine for everyday road use - High Quality with a Satin / Matt-like Finish LOGO'SOur Logo's are a High quality vinyl material which is applied once the Mud Flaps have been cut to shape and sanded.The Vinyl is long lasting once applied to the mud flap material - however in the event of peeling or damage to them - we offer a life time guarantee on them!
£59.95
Rally Flapz shortieZ | Mud Flaps to fit i30N (Hatchback) FL 2020+
Bespoke Custom Design Mudflaps to fit:Hyundai i30N Hatchback - Facelift 2020+ Version Designed and made to order here in the UK by us 'The rallyflapZ Team' *ShortieZ* - Protection without the full Rally Look! ShortieZ are our latest design, They do not stick out / hang as low as our rallyflapZ Version Mudflaps! Designed for Looks & Protection Only the Best Materials used Easy Installation Long Lasting Exceptional Flexibility Impact Resistance HYUNDAI I30N HATCHBACK FL 2020+- KIT INCLUDES:Front Fixing Kit Contents:2 x Front Mud Flaps2 x Laser-Cut Stainless Steel Brackets (Black Powder Coated) & All Fixings RequiredRear Fixing Kit Contents:2 x Rear Mud Flaps2 x Laser-Cut Stainless Steel Brackets (Black Powder Coated) & All Fixings Required Avoid expensive re-sprays and get some protection now against Road Grit, Mud, Dirt & GreaseOur rallyflapZ / ShortieZ offer outstanding durability when compared to conventional OEM hard plastic or moulded Mudflaps, You can be assured that with our rallyflapZ come peace of mind that they can be exposed to the harshest weather conditions without any danger of corrosion.MATERIALS 4mm Thick PVC (Gloss) - Perfectly fine for everyday road use - High Quality with a Gloss Finish 4mm Thick PVC (Satin) - Perfectly fine for everyday road use - High Quality with a Satin / Matt-like FinishLOGO'SOur Logo's are a High quality vinyl material which is applied once the Mud Flaps have been cut to shape and sanded.The Vinyl is long lasting once applied to the mud flap material - however in the event of peeling or damage to them - we offer a life time guarantee on them!
£69.95
Rally Flapz shortieZ | Mud Flaps to fit i30N | N-Line FASTBACK PFL & FL 2017+
Bespoke Custom Design Mudflaps to fit:Hyundai i30N FASTBACK Version (WILL fit Pre-Facelift & Facelift Models)Designed and made to order here in the UK by us 'The rallyflapZ Team' *ShortieZ* - Protection without the full Rally Look! ShortieZ are our latest design, They do not stick out / hang as low as our rallyflapZ Version Mudflaps! Designed for Looks & Protection Only the Best Materials used Easy Installation Long Lasting Exceptional Flexibility Impact Resistance HYUNDAI I30N FASTBACK- KIT INCLUDES:Front Fixing Kit Contents:2 x Front Mud Flaps2 x Laser-Cut Stainless Steel Brackets & All Fixings RequiredRear Fixing Kit Contents:2 x Rear Mud Flaps 2 x Laser-Cut Stainless Steel Brackets & All Fixings RequiredAll Fixings required Avoid expensive re-sprays and get some protection now against Road Grit, Mud, Dirt & GreaseOur rallyflapZ / ShortieZ offer outstanding durability when compared to conventional OEM hard plastic or moulded Mudflaps, You can be assured that with our rallyflapZ come peace of mind that they can be exposed to the harshest weather conditions without any danger of corrosion.MATERIALS 4mm Thick PVC (Gloss) - Perfectly fine for everyday road use - High Quality with a Gloss Finish 4mm Thick PVC (Satin) - Perfectly fine for everyday road use - High Quality with a Satin / Matt-like FinishLOGO'SOur Logo's are a High quality vinyl material which is applied once the Mud Flaps have been cut to shape and sanded.The Vinyl is long lasting once applied to the mud flap material - however in the event of peeling or damage to them - we offer a life time guarantee on them!
£69.95
Scorpion SCORPION EXHAUSTS - REPLACEMENT CARBON ASCARI TIPS FOR SCORPION EXHAUST - TWIN 114MM
All Makes Ascari Upgrade Kit TWIN Ø114mm carbon fibre Ascari trim One of the VAG group of companies Audi really got noticed as producers of performance road cars in the early 80’s with their release of the legendary Audi Ur Quattro the world’s first all-wheel drive turbo production car. A real game changer which went on to win numerous world rally championships and sowed the seeds for their future high performance road cars. Scorpion has a heritage of producing high quality performance exhausts for these legends of the 80’s through to the highly sought-after performance models available now. We are proud to offer a new development for the Audi range of cars. Manufactured from premium 80mm/3.14” T304 Stainless Steel the Audi S3 8V 2.0T and our CNC Mandrel bent large bore design permits maximum performance by allowing a greater flow of exhaust gas. Currently available options are resonated valved, resonated non-valved, non-resonated valved and non-resonated non-valved. Valved - which uses the original motor and can be operated by the driver with the drive mode select button inside the car. There is also a non-valved which deletes the valve completely for a continuous sportier tone. Our system once fitted gives the car a measurable reduction in weight when compared to the OE system this is an improvement most drivers will find hard to rebuff. When applicable Scorpion systems are fitted with an acoustically developed silencer to ensure zero drone throughout the rev range. To compliment the Audi’s facelift aesthetics, we can offer three handpicked styles of our signature Scorpion tailpipes. For this system you can choose from quad Polished Daytona, Black Ceramic Daytona, or Carbon Ascari. For those wanting to take the next step with performance upgrades our Scorpion technicians have also developed a de-cat downpipe which vastly improves flow and power over the OEM figures, or we offer a precision engineered Sports cat downpipe which has greater flow over OEM. (For closed circuit use only) If you are upgrading your exhaust insist on the enthusiast’s brand. Proven to perform at the very highest level. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Please note, this product fits multiple models. 350Z370ZFocus RS MK3i30 N (Non GPF Model)Focus ST MK4i30 Fastback N (GPF Model)i30 N (GPF Model)MK8 Golf GTI GPF ModelM135i F40MK8 Golf GTI ROW Technical information for 114ASC2 Product Type Upgrade Kit Fits To Scorpion Only Tailpipe Ascari Tailpipe Diameter 114mm Shipping Dimensions 58cm x 33cm x 16cm Notes This product fits with Scorpion systems only, it will not work with an OE system.
£299.88£269.89
Rally Flapz rallyflapZ to fit i30N / N-Line Mk3 & Mk3.5 Hatchback 2017+
Bespoke Custom Design Mudflaps to fit:Hyundai i30N / N-Line Hatchback (2017+) Will fit the Pre Facelift & Facelift*** Please see our other category for Fastback version (as they are different) Designed and made to order here in the UK by us 'The rallyflapZ Team' Designed for Looks & Protection Only the Best Materials used Easy Installation Long Lasting Exceptional Flexibility Impact Resistance HYUNDAI i30N KIT INCLUDES:2 x Front Mudflaps2 x Rear Mudflaps4 x Laser Cut, Stainless Steel - Powder Coated Satin Black Brackets(The plugs provided are very strong and are difficult to remove once inserted)Avoid expensive re-sprays and get some protection now against Road Grit, Mud, Dirt & GreaseOur rallyflapZ offer outstanding durability when compared to conventional OEM hard plastic or moulded Mudflaps, You can be assured that with our rallyflapZ come peace of mind that they can be exposed to the harshest weather conditions without any danger of corrosion.MATERIALS 3.2mm Thick PVC (Gloss) - Reintroduced to cater for all customer budgets. 4mm Thick PVC (Gloss) - Perfectly fine for everyday road use - High Quality with a Gloss Finish 4mm Thick PVC (Satin) - Perfectly fine for everyday road use - High Quality with a Satin / Matt-like Finish LOGO'SOur Logo's are a High quality vinyl material which is applied once the Mud Flaps have been cut to shape and sanded.The Vinyl is long lasting once applied to the mud flap material - however in the event of peeling or damage to them - we offer a life time guarantee on them!
£69.95 - £84.95
Rally Flapz rallyflapZ | Mud Flaps to fit i20N | N-Line
Bespoke Custom Design Mudflaps to fit:Hyundai i20N Hatchback Designed and made to order here in the UK by us 'The rallyflapZ Team' Designed for Looks & Protection Only the Best Materials used Easy Installation Long Lasting Exceptional Flexibility Impact Resistance HYUNDAI i20N KIT INCLUDES:2 x Front Mudflaps2 x Rear Mudflaps4 x Laser Cut, Stainless Steel - Powder Coated Satin Black Brackets All Fixing Hardware Required(The plugs provided are very strong and are difficult to remove once inserted)Avoid expensive re-sprays and get some protection now against Road Grit, Mud, Dirt & GreaseOur rallyflapZ offer outstanding durability when compared to conventional OEM hard plastic or moulded Mudflaps, You can be assured that with our rallyflapZ come peace of mind that they can be exposed to the harshest weather conditions without any danger of corrosion.MATERIALS 4mm Thick PVC (Gloss) - Perfectly fine for everyday road use - High Quality with a Gloss Finish 4mm Thick PVC (Satin) - Perfectly fine for everyday road use - High Quality with a Satin / Matt-like Finish LOGO'S Our Logo's are a High quality vinyl material which is applied once the Mud Flaps have been cut to shape and sanded.The Vinyl is long lasting once applied to the mud flap material - however in the event of peeling or damage to them - we offer a life time guarantee on them!
£79.95 - £84.95
POWERFLEX Powerflex ANTI-ROLL BAR LATERAL SUPPORT CLAMPS - 13-33mm
PFC13-14 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 13-14mm --- PFC15-16 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 15-16mm --- PFC17-18 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 17-18mm --- PFC19-20 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 19-20mm --- PFC21-22 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 21-22mm --- PFC23-24 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 23-24mm --- PFC25-27 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 25-27mm --- PFC28-30 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 28-30mm --- PFC31-33 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 31-33mm
£48.54
Paintmodz Proform Ltd Proform Slam Panel End Covers - Hyundai i30 (Plastic Finishes)
Tidy up your engine bay with a pair of Proform Slam Panel end covers. Supplied with new fixings, these parts are available in a range of gloss finishes including smooth (for painting), textured plastic (for the OEM look), carbon fibre effect plastic and a range of gloss coloured plastics. These covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. A bespoke design, our covers can simply be removed for servicing or should you fancy changing the theme of your engine bay. These parts are held in place using existing fixing points and supplied stainless steel fixings/double sided tape. Speed shapes pictured for colour demonstration purposes only. Other dress up items pictured available separately. 'Smooth' (for painting) plastic parts may contain manufacturing marks that would be easily removed during the preparation process.
£34.95
Paintmodz Proform Ltd Slam Panel Cover - Hyundai i30 (Plastic Finishes)
Tidy up your engine bay with a Proform Slam Panel cover. Supplied in a range of finishes including smooth (for painting), textured plastic (for the OEM look), carbon fibre effect plastic and a range of gloss coloured plastics. These covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. A bespoke design featuring 'N' logo water drainage cutouts, our covers can simply be removed for servicing or should you fancy changing the theme of your engine bay. (Parts can also be made with alternative shaped cutouts if you do not have an 'N' model - please contact us for details). These parts are held in place using existing fixing points and supplied stainless steel fixings/double sided tape. There is no need to remove the bumper to fit this part. Speed shapes pictured for colour demonstration purposes only. Other dress up items pictured available separately. 'Smooth' (for painting) plastic parts may contain manufacturing marks that would be easily removed during the preparation process.
£64.95
Paintmodz Proform Ltd Proform Brake Reservoir Cover (RHD) - Hyundai i30 / Kona N (Plastic Finishes)
Tidy up your engine bay with a Proform Brake Reservoir Cover. Supplied in a range of gloss finishes including smooth (for painting), textured plastic (for the OEM look), carbon fibre effect plastic and a range of gloss coloured plastics. These covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. A bespoke design, our covers can simply be removed for servicing or should you fancy changing the theme of your engine bay. Please note this part will only fit Right Hand Drive vehicles. Speed shapes pictured for colour demonstration purposes only. Other dress up parts pictured available separately. 'Smooth' (for painting) plastic parts may contain manufacturing marks that would be easily removed during the preparation process.
£24.95
Paintmodz Proform Ltd Proform Coolant Tank Cover - Hyundai i30N / Kona N / Veloster N (Plastic Finishes)
Tidy up your engine bay with a Proform Coolant Tank Cover. Supplied in a range of gloss finishes including smooth (for painting), textured plastic (for the OEM look), carbon fibre effect plastic and a range of gloss coloured plastics. These covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. A bespoke design, our covers can simply be removed for servicing or should you fancy changing the theme of your engine bay. Fits all i30N vehicles. May also fit other i30 models with same coolant tank - please contact us for details. Speed shapes pictured for colour demonstration purposes only. Other dress up parts pictured available separately. 'Smooth' (for painting) plastic parts may contain manufacturing marks that would be easily removed during the preparation process.
£39.95
Paintmodz Proform Ltd Proform Fuse Box Cover - Hyundai i30 / Veloster N (Plastic Finishes)
Tidy up your engine bay with a Proform Fuse Box Cover. Supplied in a range of gloss finishes including smooth (for painting), textured plastic (for the OEM look), carbon fibre effect plastic and a range of gloss coloured plastics. These covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. A bespoke design, our covers can simply be removed for servicing or should you fancy changing the theme of your engine bay. Speed shapes pictured for colour demonstration purposes only. 'Smooth' (for painting) plastic parts may contain manufacturing marks that would be easily removed during the preparation process.
£29.95
Paintmodz Proform Ltd Proform Battery Cover - Hyundai i30 / Kona N / Veloster N (Plastic Finishes)
Tidy up your engine bay with a Proform Battery Cover. Supplied in a range of gloss finishes including smooth (for painting), textured plastic (for the OEM look), carbon fibre effect plastic and a range of gloss coloured plastics. These covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. A bespoke design, our covers can simply be removed for servicing or should you fancy changing the theme of your engine bay. Speed shapes pictured for colour demonstration purposes only. Acrylic 'N' badge and other dress up parts pictured available separately. 'Smooth' (for painting) plastic parts may contain manufacturing marks that would be easily removed during the preparation process.
£39.95
forge Motorsport Forge Motorsport - Intercooler for the Hyundai i30N Mk3.5 Facelift
Product Description Following the success of our FMINT15 for the Hyundai MK3 i30N it was only obvious we should further development on the face lift MK3.5, with only a few minor design tweaks our plug and play solution is now available for the latest of Hyundai’s revision. With Hyundai redeveloping the turbo charger to run more boost and a larger flow than the previous generation there is even more reason to replace more restrictive OEM intercooler with the larger Forge Motorsport item, based on a stage 2 ECU calibration and fitted with the Forge intake (FMINDK28) and turbo inlet adaptor (FMTIA10) the new intercooler performed as expected, As you can see from the dyno results below, power was increased from 358 bhp with the stock intercooler and intake, to 381.2 BHP and 371.4LB/FT of torque with the Forge Motorsport parts installed. The Forge intercooler helps keep the IATS a safe level and prevent the stock ecu from pulling out the engines timing resulting in a loss of power. If you use a i30N for fast road or have a high performance tune in a hot climate, this product is essential. Utilising our industry leading bar and plate design alongside Solidworks CAD and flow simulation design (Computational Fluid Dynamics - CFD) to develop our high flow cast end tanks, the turbo side endtanks feature an internal divider to ensure the full volume of the stepped core is utilised. The bar and plate core has over 129% more volume and an increase of frontal surface area over 71% (over the stock cooler) meaning the Forge Motorsport intercooler is the largest currently available on the market. To ensure we deliver optimum cooling efficiency, the development team created a fabricated ducting system that has been skillfully integrated into the superior design of this product. The inlet and outlet sizes have been increased in diameter to 65mm, giving an increase of 27% more volume over the stock cooler to give perfect flow. The development team also added a custom hard pipe increasing the diameter by 14 mm to 64mm - up from the factory 50mm. This replaces the stock factory pipe on the hot side to ensure this package gives you all you need for maximum performance gains on high levels of tune.The boost pipe and intercooler come in our standard black textured finish powder coat for maximum longevity. During our extensive testing, we let the car heat soak on the dyno until the radiator fans tripped on and off (which gives an inlet temperature of around 40°C), we then did a dyno pull from this point, in doing this it gives a more consistent result and reflects real-world driving conditions more accurately. You can easily see the Forge intercooler cools much quicker and delivers a much greater drop in temperature compared to OEM. After more than six pulls on the dyno we still had super safe IATs and the Forge Motorsport intercooler gave results of 24°C, halving the factory’s intercooler intake temps from 48°C. These tests took place in relatively cold conditions with an ambient dyno cell temperature of 15°C proving how inefficient the stock intercooler is. In the summer months, the stock intercooler along with higher inlet air temperatures will have a hugely negative impact on the engine’s performance. In these conditions, the engine management will retard the ignition, resulting in a lower powered engine as temperatures rise and the ECU then pulls out the timing to stop detonation. On a mapped vehicle, the results will be even more detrimental and can lead to possible premature engine wear. This intercooler combined with our intake, and a quality aftermarket cat back exhaust with factory software will deliver you unparalleled levels of performance. The final testing results were very notable - not only did the Forge Motorsport intercooler halve the IATS, it also significantly increased both power and torque over Hyundai’s claimed figures of 275bhp and 278lb.ft of torque, making an extremely impressive 307bhp and 347lb.ft. The Forge Motorsport front mount intercooler has all the necessary hardware to install the kit in approximately 2.5 hours depending on competency and tools available
£723.98