Performance - Renault Clio MK3 197 & 200 (2005-2014)

This is a performance intake kit to fit Renault Clio 3 2.0 16V. Features Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions Easy to maintain foam air filter Easy to clean using our filter maintance kit - CK-003 What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include: Black powder coated heat shield Ramair foam filter Black silicone inlet pipe Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2006-2014 Renault Clio (MK3) 2.0 16V Sport

Read more less

This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. Key facts Pipe Ø: 2.50" (63.50mm) Barcode (GTIN): Fitting takes approximately 0.00 hours fits: Renault / Alpine Clio 200 (inc. Cup) 2009 to 2012 Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Clio 197 performance exhaust is made in 2.5"/63.5mm pipework and fits from the front pipe to the centre section. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sports catalyst version replaces a factory emissions device and is not EC homologated. This may not meet current emission laws for road use in your territory.  All relevant fittings and gaskets are supplied. Press Release Cobra Sport are pleased to announce another new addition to its ever expanding range of Renault sports exhausts. Cobra Sport were eager to take advantage of the full tuning potential that the Clio 197/200 offers along with enhancing the driving experience with a hugely improved sound track. Cobra Sport wanted to add something a little bit special to the Clio 197/200. With the de-cat and sports cat front pipe options to go with resonated and non-resonated cat back system, a powerful sound track can be created for those seeking a pitch perfect sound upgrade. The resonated cat back exhaust provides the subtlest upgrade with a refinement that gives the Clio 197/200 a sportier edge, without compromising on day-to-day usability. This system recorded a +10db increase in sound levels over the O/E system registering 88db in the 4,000rpm static test. For a more aggressive upgrade the non resonated cat back exhaust provides a much sportier exhaust tone increasing to 94db on the static test and by +15.2db at idle recoding 82db. With the many fitment options available in this model it is certainly possible to tailor the exhaust upgrade to suit your own specific requirements. To match the cat back systems we are also offering both a de-cat and high flow sports catalyst front section to form a full turbo back upgrade. Unrivalled quality is the hallmark of every Cobra Sport exhaust. Each exhaust is engineered to the highest tolerances. Mandrel bending of the 2.5" (63.5mm) stainless steel pipework ensures clean airflow. Jig manufacturing and TIG welding procedures ensure great looks and a superlative finish.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Clio RS 200 performance exhaust is made in 2.5"/63.5mm pipework and fits from the catalytic converter section backwards (Cat-back) these parts replace the centre and rear sections. The resonated exhaust option includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. This exhaust uses the existing bumper tailpipes. Press Release Delivering an even harder performance edge to Clio RS200 is the new Cobra Sport performance exhaust with a brilliant decrease in weight. Cobra Sport's Sales Manager, Matt Thomas says, "The Clio RS200 continues to delight drivers with its superb all-round performance and the Cobra Sport objective has been to further enhance what is a totally involving driving experience on both road and track. Designed and manufactured to uncompromising standards of quality and excellence that complement a superb design we have matched amazing performance and looks that are simply awesome." The exceptionally designed system is complimented by a significant increased weight advantage, the Cobra Sport centre and rear system weighing in at 14.78kg of which compares to a standard system weighing in at 18.1kg. The results achieved with the Clio RS200 speak for themselves; anyone who is seriously interested in decreasing the weight of their Clio RS200 simply cannot overlook the Cobra Sport system when selecting a performance exhaust. Great sound comes as standard with Cobra Sport. The unbelievable sound quality is pitch perfect. A louder sound is achieved by the Cobra Sport team as their cat-back non-res is at 89.6db which easily beats that of a standard cat-back non-res which only achieves 78db. Each exhaust is engineered to the highest tolerances. Mandrel bending of the stainless steel tubes ensures clean airflow. Jig manufacturing and TIG welding procedures ensure great looks and a superlative finish. With an option of four tailpipes you are guaranteed to finish off the system to your personal perfection, the options consist of: 3.25" x 2.75" twin oval slash cut, 3" twin inward rolled slash cut, 3" twin inverted slash cut and 6" x 3" oval. Media Example of Clio RS 200 sports exhaust (cat back non-resonated). Example of Clio RS 200 sports exhaust (cat back resonated). Example of Clio RS 200 sports exhaust (de cat non-resonated).

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Clio RS 200 performance exhaust is made in 2.5"/63.5mm pipework and fits from the front pipe to the centre section. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sports catalyst version replaces a factory emissions device and is not EC homologated. This may not meet current emission laws for road use in your territory.  All relevant fittings and gaskets are supplied. Press Release Cobra Sport are pleased to announce another new addition to its ever expanding range of Renault sports exhausts. Cobra Sport were eager to take advantage of the full tuning potential that the Clio 197/200 offers along with enhancing the driving experience with a hugely improved sound track. Cobra Sport wanted to add something a little bit special to the Clio 197/200. With the de-cat and sports cat front pipe options to go with resonated and non-resonated cat back system, a powerful sound track can be created for those seeking a pitch perfect sound upgrade. With the many fitment options available in this model it is certainly possible to tailor the exhaust upgrade to suit your own specific requirements. To match the cat back systems we are also offering both a de-cat and high flow sports catalyst front section to form a full turbo back upgrade. Unrivalled quality is the hallmark of every Cobra Sport exhaust. Each exhaust is engineered to the highest tolerances. Mandrel bending of the 2.5" (63.5mm) stainless steel pipework ensures clean airflow. Jig manufacturing and TIG welding procedures ensure great looks and a superlative finish. Media Example of the Cobra Sport Sports Cat Front Pipe

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Clio 197 performance exhaust is made in 2.5"/63.5mm pipework and fits from the catalytic converter section backwards (Cat-back) these parts replace the centre and rear sections. The resonated exhaust option includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. Press Release Cobra Sport are pleased to announce another new addition to its ever expanding range of Renault sports exhausts. Cobra Sport were eager to take advantage of the full tuning potential that the Clio 197 offers along with enhancing the driving experience with a hugely improved sound track. Cobra Sport wanted to add something a little bit special to the Clio 197. With the de-cat and sports cat front pipe options to go with resonated and non-resonated cat back system, a powerful sound track can be created for those seeking a pitch perfect sound upgrade. The resonated cat back exhaust provides the subtlest upgrade with a refinement that gives the Clio 197 a sportier edge, without compromising on day-to-day usability. This system recorded a +10db increase in sound levels over the O/E system registering 88db in the 4,000rpm static test. For a more aggressive upgrade the non resonated cat back exhaust provides a much sportier exhaust tone increasing to 94db on the static test and by +15.2db at idle recoding 82db. With the many fitment options available in this model it is certainly possible to tailor the exhaust upgrade to suit your own specific requirements. To match the cat back systems we are also offering both a de-cat and high flow sports catalyst front section to form a full turbo back upgrade. Unrivalled quality is the hallmark of every Cobra Sport exhaust. Each exhaust is engineered to the highest tolerances. Mandrel bending of the 2.5" (63.5mm) stainless steel pipework ensures clean airflow. Jig manufacturing and TIG welding procedures ensure great looks and a superlative finish. Media Example of Clio 197 sports exhaust (cat back non-resonated).  

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

Introducing the Enhanced Edition LED H7 Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in ANY H7 Fitments and replaces the OEM lamp unit for an ultra bright replacement. This bulb can be used as a dipped & high beam upgrade as well as a foglight. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! No longer any need for clips & caps! The bulb is designed to fit in any H7 fixing without any adjustments or additional items, and utilising its 4 point technology, this can be orientated in either 2 or 4 location points to ensure the best output and zero polarity issues! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H7 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H7 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped & high beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H8 or H11 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H8/11 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

For hydraulic brake and clutch systems. Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3) Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual. Min. dry boiling point 260°C. Min. wet boiling point 165°C Notice Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs. Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water.  DOT 4 Technical Info Contents 500 ml Colour Pale Amber Chemical basis Butoxyethanol Shelf life from production 36 Month Min. wet boiling point 165 °C Min. dry boiling point 260 °C Density 1.052 g/ml Density conditions at 20°C pH value 7-11

Read more less

PFC13-14 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 13-14mm --- PFC15-16 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 15-16mm --- PFC17-18 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 17-18mm --- PFC19-20 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 19-20mm --- PFC21-22 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 21-22mm --- PFC23-24 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 23-24mm --- PFC25-27 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 25-27mm --- PFC28-30 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 28-30mm --- PFC31-33 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 31-33mm

Read more less

Here we introduce to you our #Enhanced Edition H1 LED Upgrade. This product can NOT be used as a cornering light! Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. Unlike other suppliers, CEUK has developed an LED bulb which does not require the splicing of wires and difficult intricate clips to hold the lamp in place. This unit fits in its entirety as an OEM H1 Halogen bulb would. The LED's come as standard 6000K ice white,  Its worth noting that due to the design of headlamps, different lamps and light units may give different results to those found in our pictures. Good to know. High Lumen Output Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 20,000 (10,000 Per Bulb) What's in the box 2x H1 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb V3 This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Will fit in any vehicle which takes a H8 or H11 fitting provided you have about 1 inch of space behind the bulb! Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H8/11 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.   

Read more less

Description Here we introduce to you our #Enhanced Edition H7 LED V3 Upgrade. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Its worth noting that due to the design of the bulb, The driver / Heat fade is built into the back of the bulb and may not fit into all headlamp types. If you have any concerns please contact us at support@ceuk.org Please note - Some vehicles may require an LED clip of some sort to fit this item, message us direct if you want to clarify if your vehicle requires these.  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H7 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints LED clip not included - If required Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Part of our IllumiNite range - an ultra bright white halogen replacement for your fog and cornering bulbs. 35W - 6500K Ice White Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering.

Read more less

FMSS9 reduces shift times along with the chance of selecting the wrong gear, making it the ideal modification for track day and fast road driving. Renault hot hatches are well known for having a race inspired accuracy to the way they drive that allows the user to maximise their enjoyment from the road or track. However, the feeling of changing gears certainly isn’t at the same level of accuracy. FMSS9 is an adjustable, well engineered solution to this problem, which makes a remarkable difference especially when changing gears at high RPM. Fitting FMSS9 is as simple as it can get for a gearbox end short shifter; no specialist tools are required and most importantly the gearbox and OEM gearbox linkage stay in situ. Due to these vehicles being older, the OE linkage can be extremely difficult to remove. Therefore, keeping it in place not only saves both time and money on what would be an involved removal of the OEM gearbox linkage, but also maintains the gear weighting to ensure a smooth shift.   Although FMSS9 was designed specifically for the Clio 3 Renault Sport 197/200, it will fit several vehicles that use the same gearbox (TL4). With FMSS9 being an adjustable kit, it allows for up to a 32% decrease in shift length compared to OEM. This can be adjusted closer to the OEM shift length if required. 3D scanning and 3D printed prototypes helped to develop the best solution for this short shifter. The most important part of the development for a short shifter is to ensure that the shift cables aren’t under further deflection than when connected to the OEM. The 3D Scans allowed us to locate the repositioned ball pin along the same plane as the OEM, and then the 3D print helped us to confirm our findings before taking the design to our in-house machine shop. When reviewing the design, it was clear that the shift cable was going to be under tension, therefore a replacement shift cable bracket was developed for the FMSS9 kit. FMSS9 bolts over the OEM shifting mechanism, meaning that installation is far easier than other gearbox end short shifters. The full instructions run through how to fit this to the Clio 3 RS platform, however the TL4 gearbox is shared across other vehicles. Fitting can be carried out in around 1.5 hours with a modest tool set on your driveway.

Read more less

Here we have our Bespoke dress up kits, One of the things that we are most famous for! Why do people spend thousands on making their engine bay look magical, but not replace the grubby rusty screws that come with your car from factory? That is a question we frequently ask, and we have the solution! We supply Anodized washers, complete with a stainless steel screw, to replace your existing ones and make your car really "Pop". The benefits are, Basically:- Your screws will never rust- You can select any colour you want!- It looks the bomb! This kit is for a Universal set of screws and washers in M6 fitment PLEASE ENSURE YOUR SCREWS ARE M6 BEFORE ORDERING! Contents: 10x Washer - 10x Stainless Steel Screw (M6)Locations: Headlights, Headlight Cover, Slam Panel etc You've seen these on eBay for £7, So why buy from us you ask...Well, The ones on eBay come with Cheaply made screws and washers, Our washers are made from a premium grade aluminium and anodized to last, and all our bolts are made from stainless steel!Our products are specific to your motor, And our replacement screws are direct stainless steel replicas of the factory screw. Meaning when they arrive, you fit them! No messing about, and no disappointment. Ad-Hoc screws and washers can be ordered, Please contact us for details!

Read more less

Description Here we introduce to you our #Enhanced Edition H7 LED V2 Upgrade. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white,  Its worth noting that due to the design of the bulb, The driver / Heat fade is built into the back of the bulb and may not fit into all headlamp types. If you have any concerns please contact us at support@ceuk.org Please note - Some vehicles may require an LED clip of some sort to fit this item, message us direct if you want to clarify if your vehicle requires these. These are sold separately.   Good to know. High Lumen Output Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 20,000 (10,000 Per Bulb) What's in the box 2x H7 LED Units (6000k Default) LED clip not included - If required Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

This product is for Full Kits with a MK7 Number Plate product option, where the customer can choose this item as part of their kit!

Read more less

3 Piece trim removal tool kit. Ideal for those little jobs, We use these for installing sequential indicators and fog light guards as they work great at removing mirror caps and fog surrounds All 3 tools are the same size with 1 narrow end.

Read more less

Price is for 1 single bulb H7 Replacement HID Bulb for almost any HID Kit, including our Enhanced & Ultimate Kits Perfect replacement for a bulb that has given up the ghost or just doesn't seem as bright any more! Available in 5000k or 6000k - Price is for 1 Single Bulb Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Depending on batch, live cable may be red or blue, so please don’t be concerned if the picture shows a blue cable and yours is red - the product is the same. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering.

Read more less

CEUK ChromoLite Indicator Upgrade Tired of the orange look of your current indicator bulbs? Want something different? Well here you go! Our indicator bulbs are a mirror reflective silver colour, But still glow Bright Orange. Not only are they brighter than standard, but they enhance the look of your car dramatically by taking away the horrible orange of factory bulbs! These bulbs are the offset pin type, please check they are correct for your car before ordering. Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Description  Now we give you the Chaser Edition Bluetooth footwell strip kit  This kit is for any car, simply tell us in the description what fuse type you have in your glove box fuse holder and we will send it out! with over 600 static colours, and 200 “Fluid” colour changing and dancing modes this really is a game changer  Controlled fully by your mobile phone using Bluetooth and our fantastic control app all the functions are controlled by you! Powered by your ignition the strip will come on as soon as you start your car and remain on until the ignition is switched off, The kit utilises your passenger footwell fuse box for power What’s in the Box? Footwell Strip Wiring Loom Bluetooth Control Module Instructions Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Glove Box strip not included - This is for other Models - Images are catalogue images Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less