Performance - Renault Megane MK4 RS280 & 300 (2016-PRESENT)

Compatible vehicles:Renault- Megane- Mk4RS 280 (17-)RS 280 Cup (17-)RS 300 Trophy (18-)   FMBH9 is yet another performance upgrade product for the Renault Megane IV R.S, perfectly complimenting the performance products we have already produced for this platform. This oil breather hose uses a four-ply silicone construction, which is a substantial improvement over the single ply rubber OE hose.  As such the longevity of FMBH9 will far eclipse that of the OE hose, which is why Forge Motorsport can offer a lifetime warranty on all silicone-based products.   Not only is FMBH9 a functional improvement, but with it being available in black, blue, red, or yellow, this product really helps to improve the looks of the Megane’s engine bay. This product really compliments our FMKT027 when ordered in the identical colour and is a direct replacement for the OEM part.            The hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments and will enhance any engine bay both technically and aesthetically. As with all Forge products, these hoses come with our lifetime warranty. 

Read more less

 Vehicle Fitment: Renault - Megane- Mk4 RS 280 (17-) RS 280 Cup (17-) RS 300 Trophy (18-) The Renault Megane RS 280/300 intake is the result of widespread design trials through dyno testing and flow analysis. It was developed to achieve three main objectives:  Maintain low inlet temperatures in comparison to other aftermarket induction kits   Improved air flow  Look aesthetically pleasing and enhances the look of your engine bay  Our first criteria has been met by enclosing the PRORam filter with our CAD designed sheet aluminum airbox. The OE location for the airbox is not ideal as it is mounted at the back of the engine bay which inherently gets very warm and so it was crucial in our design to make sure we shielded as much of the hot side as possible. It was imperative to incorporate both OE air ducts in our design to allow as much cold air flow to the filter as possible; all these considerations are in order to keep IAT’s as low as possible. The second objective was met by trialing and testing of different air filters and we have even gone to the extent of using two different independent dynos to make sure the data collated was accurate. Results showed that we achieved the best gains with the PRORam performance filter. Unlike other aftermarket intakes our kit utilises a huge velocity stack that in turn houses the filter which has been designed with a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximize surface area and in turn increase the turbos air flow.   When you look at the data, the gains are there to been seen. The Forge Motorsport intake system makes +15bhp improvement even though the ambient temperature in the dyno cell has risen +3°C. The biggest gain we achieved was with the combination of both FMINDK31 & FMTIA4. This test was conducted at the hottest period of the day, however it made an outstanding +20bhp along with higher torque figures lower in the rev range, thus improving throttle response.  We also took the liberty to test a rival intake from the marketplace to see how that compared, this also worked well and demonstrated further, the need of free-flowing filtration on this vehicle.  The vehicle used for testing was a Renault Megane 280 cup with Stage one K-tec software and performance exhaust and sports cat. Testing was completed on Litchfield’s Maha dyno, manufactured by the same people who currently supply BMW M sport and Mercedes Benz for all their engine calibration and Dyno testing. We also used Performance Remap in Gloucester with their VTEC 4 wheel-drive dynamometer. This was to ensure all our data has been achieved with results as accurate as possible by conducting all tests on two independent rolling roads. Finally, the aesthetical challenge to enhance an engine bay which we felt is bland and a bit messy. Obviously, function over form is our number one priority, however we have tried to produce something which is quite stealthy and classy, but is also purposeful. Finished in our black textured powder coating gives the air box an air of OE quality. The cold side of the air box has been left open to aid breathing and show off the large PRORam filter. When taking this product out of the box for the first time you will get to see and feel the quality of this product. Components like the expertly machined MAF boss and the precision laser cut brackets showcase our manufacturing expertise and reassure the enthusiasts the quality is second to none.    As a by-product of all the above not only will you notice the increased performance but a slight change in your engine acoustics can also be heard. As with all Forge Motorsport products we offer a no quibble lifetime guarantee on all parts of this kit excluding the filter. A commonly asked question is will this fit a competitor’s & OE turbo inlet hose intake? The answer is yes it will fit other manufacturers inlet hoses and fits to the original Renault inlet hose.  MAF Boss Manufactured from 6082 aerospace grade aluminium.  Black anodised & powder coating for ultimate protection and durability.   PRORAM performance air filter which has been designed with a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximize surface area and in turn increase air flow.  No engine check lights (EML)  Increased air flow   The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone.  This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist.  The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically  The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader.  Lifetime warranty       

Read more less

This is a performance intake kit to fit Renault Megane 4 1.8 RS. Features Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions Easy to maintain foam air filter Easy to clean using our filter maintance kit - CK-003 What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include: Black powder coated heat shield Ramair foam filter Black aluminium inlet pipe Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2017-2025 Renault Megane (MK4) 1.8 RS Tce 280 2017-2025 Renault Megane (MK4) 1.8 RS 300

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Mk4 Megane RS performance exhaust is made fits from the catalytic converter/GPF section backwards, this exhaust replaces the centre and rear sections.  Cobra Sport opted for 3in/76.2mm stainless steel pipework for the biggest upgrade in terms of performance, flow rate and sound levels.  This Cobra Sport performance exhaust fits from the catalytic converter/GPF section backwards, replacing the centre and rear sections, keeping the stock catalyst and GPF (gasoline particulate filter) in place. Please note: This performance exhaust upgrade is non-valved and does not fit later Trophy models with the factory-fit exhaust valve, fitment to valved models may result in a warning light.  Test Results Sound - Engine at Idle: 79dB (+10.3dB) - Static 4,000rpm test: 83.5dB (+2.5dB) All relevant fittings and gaskets are supplied. Download Renault Megane R.S. PDF Brochure >> Press Release Renault have owned the hot hatchback scene ever since the launch of their first hot hatchback, the Renault 5 Alpine, back in 1976. The recipe has been evolved and perfected over the past four decades and the latest hot hatchback to come from Dieppe is the all-new Renault Megane R.S. 300 Trophy. The Megane R.S. is powered by the 300BHP 1.8L turbocharged engine as seen in the Alpine A110 sports car, and features Renualt's '4Control' four wheel steering system which allows for enhanced agility and cornering performance. The result is a hot hatchback which can lap the Nürburgring in under 8 minutes, making it one of the fastest and most advanced hot hatchbacks currently on sale. As a result, the Megane R.S. has really hit the spot with enthusiast drivers around the world, however it is shipped from the factory with a muted exhaust sound which dilutes the overall driving experience. Cobra Sport's all new performance exhaust range has been designed to enhance the driving experience of the Megane R.S. by developing a precision TIG-welded performance exhaust which not only adds a new level of sound but also adds performance.Cobra Sport's research and development team were also able to increase the sound level by +12.9dB whilst offering a significant weight saving of over 30% in Venom non-resonated cat back configuration. Cobra Sport's research and development team have developed an extensive range of performance exhaust systems, that will cater to the needs of any Renaultsport enthusiast.The Renault Megane R.S. 280/300 performance exhaust configurations are as follows:Cat Back with rear silencer – The Cobra Sport cat back with rear silencer offers Megane R.S. drivers a strong upgrade from the standard sound. By adding extra bass from the bottom end of the revs, the 1.8L turbocharged engine is allowed to sing to its hearts content when under load with the backbox supplying silencing that won’t disturb your neighbours every time you enter the street. This setup is also ideal to be matched with our high flow sports catalyst downpipe. Venom Resonated Cat Back – The Cobra Sport Venom Resonated cat back presents the perfect middle ground of aggression and drivability. The factory mapped pops and crackles remain intact all be it with a touch of softening when compared to those produced by the Non-resonated Venom system. By removing the rear silencer, this setup offers a significant sound upgrade in all areas of the rev range. Venom Non-Resonated Cat Back – The Cobra Sport non-resonated cat back system is designed for those that want to stand out in the crowd without effecting their emissions and catalytic converter. By removing all silencers after the Cat and GPF the Cobra Sport team have unleashed the full potential of the 1.8L 4-cylinder, making it a real head turner. The factory mapped pops and crackles become more pronounced with a heightened volume and feeling of emotion for when you want to feel the hostility from your B-road barnstormer. Like all Cobra Sport exhausts, this system utilises precision TIG-welding techniques for exemplary fit and finish – a feature that gives Cobra Sport an advantage over other manufacturers. With over 25 years in the performance exhaust industry, each Cobra Sport exhaust system is designed, manufactured and tested in Sheffield, the heart of the UK steel industry. Media Exhaust Sound Example - Resonated Venom Cat Back Exhaust Promotional Video - Fitted with Venom Cat Back Exhaust. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.

Read more less

Note - This product is designed without a rear silencer and will be loud. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Mk4 Megane RS performance exhaust is made in 3"/76.2mm pipework and fits from the catalyst/GPF section backwards, replacing the centre and rear sections. The resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. This Cobra Sport performance exhaust fits from the catalytic converter/GPF section backwards, replacing the centre and rear sections, keeping the stock catalyst and GPF (gasoline particulate filter) in place. Venom (Non-Resonated) Cat Back Test Results (Race Mode): Sound - Engine at Idle: 87.5dB (+18.8dB) - Static 4,000rpm test: 93.9dB (+12.9dB)  Venom (Resonated) Cat Back Test Results (Race Mode): Sound - Engine at Idle: 86.7dB (+18.2dB) - Static 4,000rpm test: 89.1dB (+8.1dB)  Please note: This performance exhaust upgrade is non-valved and does not fit later Trophy models with the factory-fit exhaust valve, fitment to valved models may result in a warning light.  This exhaust is sold for off road use only. All relevant fittings and gaskets are supplied. Download Renault Megane R.S. PDF Brochure >> Press Release Renault have owned the hot hatchback scene ever since the launch of their first hot hatchback, the Renault 5 Alpine, back in 1976. The recipe has been evolved and perfected over the past four decades and the latest hot hatchback to come from Dieppe is the all-new Renault Megane R.S. 300 Trophy. The Megane R.S. is powered by the 300BHP 1.8L turbocharged engine as seen in the Alpine A110 sports car, and features Renualt's '4Control' four wheel steering system which allows for enhanced agility and cornering performance. The result is a hot hatchback which can lap the Nürburgring in under 8 minutes, making it one of the fastest and most advanced hot hatchbacks currently on sale. As a result, the Megane R.S. has really hit the spot with enthusiast drivers around the world, however it is shipped from the factory with a muted exhaust sound which dilutes the overall driving experience. Cobra Sport's all new performance exhaust range has been designed to enhance the driving experience of the Megane R.S. by developing a precision TIG-welded performance exhaust which not only adds a new level of sound but also adds performance.Cobra Sport's research and development team were also able to increase the sound level by +12.9dB whilst offering a significant weight saving of over 30% in Venom non-resonated cat back configuration. Cobra Sport's research and development team have developed an extensive range of performance exhaust systems, that will cater to the needs of any Renaultsport enthusiast.The Renault Megane R.S. 280/300 performance exhaust configurations are as follows:Cat Back with rear silencer – The Cobra Sport cat back with rear silencer offers Megane R.S. drivers a strong upgrade from the standard sound. By adding extra bass from the bottom end of the revs, the 1.8L turbocharged engine is allowed to sing to its hearts content when under load with the backbox supplying silencing that won’t disturb your neighbours every time you enter the street. This setup is also ideal to be matched with our high flow sports catalyst downpipe. Venom Resonated Cat Back – The Cobra Sport Venom Resonated cat back presents the perfect middle ground of aggression and drivability. The factory mapped pops and crackles remain intact all be it with a touch of softening when compared to those produced by the Non-resonated Venom system. By removing the rear silencer, this setup offers a significant sound upgrade in all areas of the rev range. Venom Non-Resonated Cat Back – The Cobra Sport non-resonated cat back system is designed for those that want to stand out in the crowd without effecting their emissions and catalytic converter. By removing all silencers after the Cat and GPF the Cobra Sport team have unleashed the full potential of the 1.8L 4-cylinder, making it a real head turner. The factory mapped pops and crackles become more pronounced with a heightened volume and feeling of emotion for when you want to feel the hostility from your B-road barnstormer. Like all Cobra Sport exhausts, this system utilises precision TIG-welding techniques for exemplary fit and finish – a feature that gives Cobra Sport an advantage over other manufacturers. With over 25 years in the performance exhaust industry, each Cobra Sport exhaust system is designed, manufactured and tested in Sheffield, the heart of the UK steel industry. Media Exhaust Sound Example - Resonated Venom Cat Back Exhaust Promotional Video - Fitted with Venom Cat Back Exhaust. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

Introducing the Enhanced Edition LED H7 Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in ANY H7 Fitments and replaces the OEM lamp unit for an ultra bright replacement. This bulb can be used as a dipped & high beam upgrade as well as a foglight. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! No longer any need for clips & caps! The bulb is designed to fit in any H7 fixing without any adjustments or additional items, and utilising its 4 point technology, this can be orientated in either 2 or 4 location points to ensure the best output and zero polarity issues! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H7 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H7 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

  As part of our expanding Renault Sport product range, AIRTEC Motorsport is proud to launch our uprated top engine mount upgrade suitable for track or fast road use. This is designed to directly replace the original lower engine mount that is made from cast aluminium with a soft rubber bush insert. Our AIRTEC Motorsport heavy duty replacement is machined from billet aluminium and comes in a high-quality, anodised black finish with engraved logo. Accompanying the mount is a much stiffer polyurethane bush insert that radically reduces engine movement. As a result, throttle response is improved, wheel hop is reduced and gear changes feel more instant as excessive slack is removed from the driveline. The mount uses the original bolts and comes complete with fitting instructions. It is ideally matched with our direct replacement upper engine mount for a comprehensive driveline upgrade: AIRTEC Motorsport Upper Engine Mount for Renault Megane MK4 RS280/300 – AIRTEC Motorsport Please note: Uprating the torque mount to a stiffer busing will increase noise and vibration within the cabin. Features: CNC machined from solid billet aluminium High-quality anodised black finish Engraved AIRTEC Motorsport logo Reduces engine movement and wheel hop on hard acceleration Faster gear changes and improved throttle response Direct replacement for original cast aluminium and rubber insert Uses original fixtures and fittings and comes with instructions Can be fitted in 30 minutes with no special tools required Registered Design Right number: Application pending  AIRTEC Part No: ATMSREN9

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped & high beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H8 or H11 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H8/11 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

For hydraulic brake and clutch systems. Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3) Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual. Min. dry boiling point 260°C. Min. wet boiling point 165°C Notice Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs. Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water.  DOT 4 Technical Info Contents 500 ml Colour Pale Amber Chemical basis Butoxyethanol Shelf life from production 36 Month Min. wet boiling point 165 °C Min. dry boiling point 260 °C Density 1.052 g/ml Density conditions at 20°C pH value 7-11

Read more less

  As part of our expanding Renault product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the Megane RS Mk4 model, suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the Megane RS Mk4 model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality laser cut bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features: Developed specifically for the Renault Megane RS Mk4 Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High quality powder-coated black finish Pro Hoses silicone hoses Step-by-step fitting guide All fixtures and fittings Only available in Pro-Series Black AIRTEC Part No: ATMSREN11

Read more less

PFC13-14 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 13-14mm --- PFC15-16 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 15-16mm --- PFC17-18 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 17-18mm --- PFC19-20 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 19-20mm --- PFC21-22 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 21-22mm --- PFC23-24 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 23-24mm --- PFC25-27 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 25-27mm --- PFC28-30 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 28-30mm --- PFC31-33 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 31-33mm

Read more less

Here we introduce to you our #Enhanced Edition H1 LED Upgrade. This product can NOT be used as a cornering light! Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. Unlike other suppliers, CEUK has developed an LED bulb which does not require the splicing of wires and difficult intricate clips to hold the lamp in place. This unit fits in its entirety as an OEM H1 Halogen bulb would. The LED's come as standard 6000K ice white,  Its worth noting that due to the design of headlamps, different lamps and light units may give different results to those found in our pictures. Good to know. High Lumen Output Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 20,000 (10,000 Per Bulb) What's in the box 2x H1 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

  As part of our expanding Renault Sport product range, AIRTEC Motorsport is proud to launch our upper engine mount upgrade suitable for track or fast road use. This is designed to directly replace the original upper engine mount that is made from cast aluminium with a soft rubber bush insert. Our AIRTEC Motorsport heavy duty replacement is machined from billet aluminium and comes in a high-quality, anodised black finish with engraved logo. Accompanying the mount is a much stiffer polyurethane bush insert that radically reduces engine movement. As a result, throttle response is improved, wheel hop is reduced and gear changes feel more instant as excessive slack is removed from the driveline. The mount uses the original bolts. Features: CNC machined from solid billet aluminium High-quality anodised black finish Engraved AIRTEC Motorsport logo Reduces engine movement and wheel hop on hard acceleration Faster gear changes and improved throttle response Direct replacement for original cast aluminium and rubber insert Uses original fixtures and fittings AIRTEC Part No: ATMSREN10

Read more less

Pro Hoses induction hose for Renault Megane MK4. Available in a variety of colours including Gloss Black, Performance Blue, Race Red and Bright Yellow. Choose optional stainless jubilee clips. Part No: PH/INDREN1

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb V3 This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Will fit in any vehicle which takes a H8 or H11 fitting provided you have about 1 inch of space behind the bulb! Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H8/11 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.   

Read more less

Description Here we introduce to you our #Enhanced Edition H7 LED V3 Upgrade. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Its worth noting that due to the design of the bulb, The driver / Heat fade is built into the back of the bulb and may not fit into all headlamp types. If you have any concerns please contact us at support@ceuk.org Please note - Some vehicles may require an LED clip of some sort to fit this item, message us direct if you want to clarify if your vehicle requires these.  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H7 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints LED clip not included - If required Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Part of our IllumiNite range - an ultra bright white halogen replacement for your fog and cornering bulbs. 35W - 6500K Ice White Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering.

Read more less

Here we have our Bespoke dress up kits, One of the things that we are most famous for! Why do people spend thousands on making their engine bay look magical, but not replace the grubby rusty screws that come with your car from factory? That is a question we frequently ask, and we have the solution! We supply Anodized washers, complete with a stainless steel screw, to replace your existing ones and make your car really "Pop". The benefits are, Basically:- Your screws will never rust- You can select any colour you want!- It looks the bomb! This kit is for a Universal set of screws and washers in M6 fitment PLEASE ENSURE YOUR SCREWS ARE M6 BEFORE ORDERING! Contents: 10x Washer - 10x Stainless Steel Screw (M6)Locations: Headlights, Headlight Cover, Slam Panel etc You've seen these on eBay for £7, So why buy from us you ask...Well, The ones on eBay come with Cheaply made screws and washers, Our washers are made from a premium grade aluminium and anodized to last, and all our bolts are made from stainless steel!Our products are specific to your motor, And our replacement screws are direct stainless steel replicas of the factory screw. Meaning when they arrive, you fit them! No messing about, and no disappointment. Ad-Hoc screws and washers can be ordered, Please contact us for details!

Read more less

Description Here we introduce to you our #Enhanced Edition H7 LED V2 Upgrade. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white,  Its worth noting that due to the design of the bulb, The driver / Heat fade is built into the back of the bulb and may not fit into all headlamp types. If you have any concerns please contact us at support@ceuk.org Please note - Some vehicles may require an LED clip of some sort to fit this item, message us direct if you want to clarify if your vehicle requires these. These are sold separately.   Good to know. High Lumen Output Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 20,000 (10,000 Per Bulb) What's in the box 2x H7 LED Units (6000k Default) LED clip not included - If required Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

This product is for Full Kits with a MK7 Number Plate product option, where the customer can choose this item as part of their kit!

Read more less

3 Piece trim removal tool kit. Ideal for those little jobs, We use these for installing sequential indicators and fog light guards as they work great at removing mirror caps and fog surrounds All 3 tools are the same size with 1 narrow end.

Read more less

Price is for 1 single bulb H7 Replacement HID Bulb for almost any HID Kit, including our Enhanced & Ultimate Kits Perfect replacement for a bulb that has given up the ghost or just doesn't seem as bright any more! Available in 5000k or 6000k - Price is for 1 Single Bulb Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Depending on batch, live cable may be red or blue, so please don’t be concerned if the picture shows a blue cable and yours is red - the product is the same. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering.

Read more less