PERFORMANCE - SEAT ALTEA (2004-2015)
RamAir RamAir Performance Oversized Induction Kit - VAG Group EA113 2.0 TSI Engines
This Performance oversized intake kit with black silicone intake pipe is designed to fit Audi, Seat, Skoda & VW with the 2.0 TFSI AXX BPY BWA engines. Compatible with both K03 and K04 turbos Features 90mm Intake Diameter Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions Easy to clean using our filter maintance kit - CK-003 What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include: Black powder coated heat shield Ramair foam filter Black silicone and aluminium inlet pipe Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2007-2008 Skoda Octavia VRS (MK2) 2.0 TFSI 2005-2008 VW Jetta (A5) 2.0 TFSI 2006-2013 Seat Leon (MK2) 2.0 TFSI 2005-2009 VW Passat (B6) 2.0 TFSI 2004-2009 Seat Toledo (5P) 2.0 TFSI 2004-2015 Seat Altea (MK1) 2.0 TFSI 2006-2010 VW Eos (MK1) 2.0 TFSI 2004-2009 VW Golf (MK5) 2.0 TFSI 2004-2013 Audi S3 (8P) 2.0 TFSI 2011-2012 VW Golf GTi Edition 35 (MK6) 2.0 TFSI 2009-2013 VW Golf R (MK6) 2.0 TFSI 2009-2016 VW Scirocco R (MK3) 2.0 TFSI 2006-2013 Seat Leon Cupra (MK2) 2.0 TFSI 2006-2013 Seat Leon Cupra R (MK2) 2.0 TFSI 2006-2010 Audi TT (8J) 2.0 TFSI 2004-2009 Audi A3 (8P) 2.0 TFSI 2004-2008 VW Golf GTi (MK5) 2.0 TFSI 2004-2008 VW Golf GTi Edition 30 (MK5) 2.0 TFSI
£282.23 - £303.34
VIS VIS Motorsport High Pressure Fuel Pump Internals - 2.0T FSI EA113
VIS Motorsport HPFP Internals - 2.0T FSI EA113 Modification of the 2.0T-FSI EA113 to Stage 2+ or above required additional volume of high-pressure fuel in order to eliminate 'fuel cut', especially in the mid-range. The limitation of how much volume of fuel the high pressure pump can flow is dependent upon the volume displaced by the pressurizing cylinder inside the pump.This upgrade replaces the internal parts that are responsible for pressure and volume of fuel that reaches your injectors to meet the demands that come with higher power levels.Tolerances involved, the final surface finish on the piston inside the fuel pump is so critical that it can be damaged by touching them with bare hands.The tolerances between the piston and the new sleeve the piston rides in can only be measured by a machine which uses air volumes to measure the part clearances to within microscopic levels.Features: Piston has 55% more area over the OEM Piston head optimized for ideal fuel flow direction Piston surface hardened and heat treated in 3 different stages Uses OEM-style spring keeper, not a higher rated one that will prematurely wear the cam follower Get the most out of the direct injection fuelling system on your 2.0T FSI. Not only does the upgrade increase the amount of fuel your high pressure fuel pump can deliver but it will also decrease the duty cycle of the N276 solenoid on your pump. Lowering the duty cycle of the N276 will extend the life of this solenoid, an item that commonly fails on these pumps but isn't available separately. Even a standard stock or Stage 1 car will see benefits from running these internals Can sustain easy 600 hp, over 175 bar if hardware setup allow! Laser marked for better traceability and protecting from fake replica Pump housing O ring made of Viton Each HPFP internal kit is sold as a rebuild kit only(not complete unit). fits: Shop By Car/SEAT/CUPRA/Toledo Mk3 (5P) Shop By Car/SEAT/CUPRA/Leon Mk2 (1P) Shop By Car/SEAT/CUPRA/Altea Shop By Car/Audi/TT Mk2 (8J) Shop By Car/Audi/A4 (B7) Shop By Car/Volkswagen/Passat B6 Shop By Car/Volkswagen/Jetta Mk5 Shop By Car/Volkswagen/EOS Shop By Car/Volkswagen/Scirocco Shop By Car/Volkswagen/Golf Mk5 Shop By Car/Volkswagen/Golf Mk6 Shop By Car/Audi/A3 (8P 03-13) Shop By Car/Audi/S3 (8P) Shop By Car/Skoda/Octavia Mk2 (1Z)
£350.00 - £407.00
PlexiClick® - Invisible Number Plate Holder Clip
This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily
£10.00
Pro Props Pro Props Carbon Fibre Bonnet / Boot / Door Show Prop
Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)
£69.99
Enhanced Edition LED H7 Mini
Introducing the Enhanced Edition LED H7 Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in ANY H7 Fitments and replaces the OEM lamp unit for an ultra bright replacement. This bulb can be used as a dipped & high beam upgrade as well as a foglight. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! No longer any need for clips & caps! The bulb is designed to fit in any H7 fixing without any adjustments or additional items, and utilising its 4 point technology, this can be orientated in either 2 or 4 location points to ensure the best output and zero polarity issues! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H7 fitting Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H7 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£54.00£42.00
Enhanced Edition LED H8/11 Mini Fog Unit
Description Introducing the Enhanced Edition LED H8/11 Fog Bulb Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped & high beam upgrade Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H8 or H11 fitting Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H8/11 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£42.00
Wurth Wurth Brake Fluid - Dot4 500ml
For hydraulic brake and clutch systems. Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3) Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual. Min. dry boiling point 260°C. Min. wet boiling point 165°C Notice Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs. Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water. DOT 4 Technical Info Contents 500 ml Colour Pale Amber Chemical basis Butoxyethanol Shelf life from production 36 Month Min. wet boiling point 165 °C Min. dry boiling point 260 °C Density 1.052 g/ml Density conditions at 20°C pH value 7-11
£10.00
POWERFLEX POWERFLEX - REAR UPPER WISHBONE INNER BUSH (AUDI / SEAT / SKODA / VW MODELS)
REAR UPPER WISHBONE INNER BUSH PFR85-514 OEM Part Number: Arm = 5Q0505323D / 5Q0 505 323 D OEM Part Number: Arm = 1K0505323N / 1K0 505 323 N --- REAR UPPER WISHBONE INNER BUSH PFR85-514BLK OEM Part Number: Arm = 5Q0505323D / 5Q0 505 323 D OEM Part Number: Arm = 1K0505323N / 1K0 505 323 N --- fits: Audi A1 Quattro (2013), Audi S1 8X (2015 on), Audi A3 inc Quattro MK2 8P (2003-2012), Audi RS3 MK2 8P (2011-2013), Audi S3 MK2 8P (2006-2012), Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi RS3 MK3 8V (2015 - 2020), Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi RS3 MK4 8Y (2020 on), Seat Alhambra MK2 (2010 - ON), Seat Ateca Multi-Link (2016-ON), Volkswagen Beetle A5 Multi-Link (2011 - ON), Volkswagen Bora A5 (1K) (2005-2010), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK6 inc R 5K (2009-2012), Volkswagen Golf MK5 1K, Volkswagen Golf Mk5 GTI & R32, Volkswagen Golf Plus 5M, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK6 A6 Multi-Link (2011 - 2018), Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK5 A5 1K (2005-2010), Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon Mk2 1P (2005-2012), Skoda Octavia Mk2 1Z (2004-2012), Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Volkswagen Passat B6 & B7 Typ3C (2006-2013), Volkswagen Passat B8 (2013 on), Volkswagen Passat CC 35 (2008-2012), Audi Q2 4WD Quattro MULTI LINK, Audi Q3 8U, Audi RSQ3 8U, Audi Q3 F3, Audi RSQ3 F3, Volkswagen Scirocco MK3 (2008 - 2017), Seat Altea 5P (2004-), Seat Tarraco (2018-), Volkswagen Sharan MK2 (2010 - ON), Skoda Kodiaq (2017 - ON), Skoda Yeti 5L (2009 - 2017), Skoda Superb (2009-2010), Skoda Superb (2010 - 2015), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen Tiguan 5N MK1 (2007 - 2017), Volkswagen Tiguan AD/BW MK2 (2017 on), Seat Toledo Mk3 5P (2004-2009), Volkswagen Touran (2003-2015), Volkswagen Touran (2017 - ), Audi TT MK2 8J (2007-2014), Audi TTRS MK2 8J (2009-2014), Audi TT / TTRS Mk3 FV/8S (2014 on), Volkswagen Vento A5 (2005 - 2010), Volkswagen Arteon (2017 on), Volkswagen CC (2012 - 2017), Volkswagen Eos 1F (2006-2016)
£69.85
POWERFLEX POWERFLEX - REAR LOWER TRACK ROD INNER BUSH (AUDI / SEAT / SKODA / VW MODELS) (Copy)
REAR LOWER TRACK ROD INNER BUSH PFR85-512 OEM Part Number: Arm = 1K0501529F / 1K0 501 529 F OEM Part Number: Arm = 1K0501529J / 1K0 501 529 J OEM Part Number: Arm = 1K0501529C / 1K0 501 529 C --- REAR LOWER TRACK ROD INNER BUSH PFR85-512BLK OEM Part Number: Arm = 1K0501529F / 1K0 501 529 F OEM Part Number: Arm = 1K0501529J / 1K0 501 529 J OEM Part Number: Arm = 1K0501529C / 1K0 501 529 C --- FITS: Audi A1 Quattro (2013), Audi A3 inc Quattro MK2 8P (2003-2012), Audi RS3 MK2 8P (2011-2013), Audi S3 MK2 8P (2006-2012), Seat Alhambra MK2 (2010 - ON), Volkswagen Beetle A5 Multi-Link (2011 - ON), Volkswagen Bora A5 (1K) (2005-2010), Volkswagen Golf MK6 inc R 5K (2009-2012), Volkswagen Golf MK5 1K, Volkswagen Golf Mk5 GTI & R32, Volkswagen Golf Plus 5M, Volkswagen Jetta MK6 A6 Multi-Link (2011 - 2018), Volkswagen Jetta MK5 A5 1K (2005-2010), Seat Leon Mk2 1P (2005-2012), Skoda Octavia Mk2 1Z (2004-2012), Volkswagen Passat B6 & B7 Typ3C (2006-2013), Volkswagen Passat CC 35 (2008-2012), Audi Q3 8U, Audi RSQ3 8U, Volkswagen Scirocco MK3 (2008 - 2017), Seat Altea 5P (2004-), Volkswagen Sharan MK2 (2010 - ON), Skoda Yeti 5L (2009 - 2017), Skoda Superb (2009-2010), Skoda Superb (2010 - 2015), Volkswagen Tiguan 5N MK1 (2007 - 2017), Seat Toledo Mk3 5P (2004-2009), Volkswagen Touran (2003-2015), Audi TT MK2 8J (2007-2014), Audi TTRS MK2 8J (2009-2014), Volkswagen Vento A5 (2005 - 2010), Volkswagen CC (2012 - 2017), Volkswagen Eos 1F (2006-2016)
£94.48
POWERFLEX POWERFLEX - LOWER ENGINE MOUNT SMALL BUSH - AUDI / SEAT / SKODA / VW MODELS
PFF85-505 OEM Part Number: 1J0199851 OEM Part Number: 1K0199855 --- LOWER ENGINE MOUNT SMALL BUSH PFF85-505BLK OEM Part Number: 1J0199851 OEM Part Number: 1K0199855 --- FITS: Audi A3 inc Quattro MK2 8P (2003-2012), Audi S3 MK2 8P (2006-2012), Volkswagen Bora A5 (1K) (2005-2010), Volkswagen Caddy Mk3 Typ 2K (2004 - 06/2010), Volkswagen Golf MK6 inc R 5K (2009-2012), Volkswagen Golf MK5 1K, Volkswagen Golf Mk5 GTI & R32, Volkswagen Golf Plus 5M, Volkswagen Jetta MK5 A5 1K (2005-2010), Seat Leon Mk2 1P (2005-2012), Skoda Octavia Mk2 1Z (2004-2012), Volkswagen Passat B6 & B7 Typ3C (2006-2013), Volkswagen Passat CC 35 (2008-2012), Volkswagen Scirocco MK3 (2008 - 2017), Seat Altea 5P (2004-), Skoda Superb (2009-2010), Seat Toledo Mk3 5P (2004-2009), Volkswagen Touran (2003-2015), Audi TT MK2 8J (2007-2014), Audi TTRS MK2 8J (2009-2014), Volkswagen Vento A5 (2005 - 2010), Volkswagen CC (2012 - 2017), Volkswagen Eos 1F (2006-2016)
£36.22
POWERFLEX Powerflex ANTI-ROLL BAR LATERAL SUPPORT CLAMPS - 13-33mm
PFC13-14 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 13-14mm --- PFC15-16 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 15-16mm --- PFC17-18 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 17-18mm --- PFC19-20 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 19-20mm --- PFC21-22 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 21-22mm --- PFC23-24 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 23-24mm --- PFC25-27 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 25-27mm --- PFC28-30 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 28-30mm --- PFC31-33 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 31-33mm
£48.54
Enhanced Edition LED H1
Here we introduce to you our #Enhanced Edition H1 LED Upgrade. This product can NOT be used as a cornering light! Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. Unlike other suppliers, CEUK has developed an LED bulb which does not require the splicing of wires and difficult intricate clips to hold the lamp in place. This unit fits in its entirety as an OEM H1 Halogen bulb would. The LED's come as standard 6000K ice white, Its worth noting that due to the design of headlamps, different lamps and light units may give different results to those found in our pictures. Good to know. High Lumen Output Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 20,000 (10,000 Per Bulb) What's in the box 2x H1 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£33.00
Enhanced Edition LED H8/11 Fog Unit V3
Description Introducing the Enhanced Edition LED H8/11 Fog Bulb V3 This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped beam upgrade Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Will fit in any vehicle which takes a H8 or H11 fitting provided you have about 1 inch of space behind the bulb! Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H8/11 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£54.00£45.00
Enhanced Edition LED H7 - Version 3
Description Here we introduce to you our #Enhanced Edition H7 LED V3 Upgrade. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Its worth noting that due to the design of the bulb, The driver / Heat fade is built into the back of the bulb and may not fit into all headlamp types. If you have any concerns please contact us at support@ceuk.org Please note - Some vehicles may require an LED clip of some sort to fit this item, message us direct if you want to clarify if your vehicle requires these. Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H7 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints LED clip not included - If required Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£45.00 - £72.50
IllumiNite H11 Fog / Cornering Bulbs
Part of our IllumiNite range - an ultra bright white halogen replacement for your fog and cornering bulbs. 35W - 6500K Ice White Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering.
£15.60£13.00
Universal Engine Bay Dress Up Kit (M6 Fitment)
Here we have our Bespoke dress up kits, One of the things that we are most famous for! Why do people spend thousands on making their engine bay look magical, but not replace the grubby rusty screws that come with your car from factory? That is a question we frequently ask, and we have the solution! We supply Anodized washers, complete with a stainless steel screw, to replace your existing ones and make your car really "Pop". The benefits are, Basically:- Your screws will never rust- You can select any colour you want!- It looks the bomb! This kit is for a Universal set of screws and washers in M6 fitment PLEASE ENSURE YOUR SCREWS ARE M6 BEFORE ORDERING! Contents: 10x Washer - 10x Stainless Steel Screw (M6)Locations: Headlights, Headlight Cover, Slam Panel etc You've seen these on eBay for £7, So why buy from us you ask...Well, The ones on eBay come with Cheaply made screws and washers, Our washers are made from a premium grade aluminium and anodized to last, and all our bolts are made from stainless steel!Our products are specific to your motor, And our replacement screws are direct stainless steel replicas of the factory screw. Meaning when they arrive, you fit them! No messing about, and no disappointment. Ad-Hoc screws and washers can be ordered, Please contact us for details!
£13.00
Enhanced Edition LED H7 - Version 2
Description Here we introduce to you our #Enhanced Edition H7 LED V2 Upgrade. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, Its worth noting that due to the design of the bulb, The driver / Heat fade is built into the back of the bulb and may not fit into all headlamp types. If you have any concerns please contact us at support@ceuk.org Please note - Some vehicles may require an LED clip of some sort to fit this item, message us direct if you want to clarify if your vehicle requires these. These are sold separately. Good to know. High Lumen Output Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 20,000 (10,000 Per Bulb) What's in the box 2x H7 LED Units (6000k Default) LED clip not included - If required Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£53.99£44.99
MK7 Fiesta Number plate Option
This product is for Full Kits with a MK7 Number Plate product option, where the customer can choose this item as part of their kit!
£7.50 - £17.00
Direnza Direnza - VW Golf Mk5 2.0TDI / Seat Leon 2.0 TDI / Audi A3 8P 2.0 TDI - Ceramic Coated Decat Downpipe
This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. Direnza Ceramic Coated Exhaust Downpipes are manufactured from T304 grade stainless steel, and feature smooth, matte ceramic finish to give extra heat protection on those intense track-sessions. A direct replacement for the stock part, Direnza mandrel-bent exhaust components are fully TIG welded and feature CNC-machined flanges for strength and an accurate, secure fit everytime. Engineered to not only improve power and torque across the entire RPM range but Direnza exhaust components improve throttle response to help you push further and faster on the road or the track Fitment Audi A3 8P 1.9, 2.0 TDI – BKC, BXE, BKD, AZV engines 05/03+Seat Altea 1.9, 2.0 TDI – BKC, BJB, BKD, AZV, BXE engines 05/04+Seat Leon 1.9, 2.0 TDI – BKC, BXE, BKD, ASV engines 09/05+Seat Toledo 2.0 TDI – BKD, ASV engines 10/04+Skoda Octavia 1.9, 2.0 TDI – BKC, BXE, BLS, BKD, AZV engines 07/04+VW Caddy 1.9 TDI – BJB engine 04/04+VW Golf 1.9, 2.0 TDI Mk.5 – BKC, BXE, BXF, BRU, BKD, AZV engines 10/03+VW Golf Plus 1.9, 2.0 TDI Mk.5 – BKC, BKD, AZV engine 06/05+VW Jetta 1.9, 2.0 TDI – BKC, BKD, AZV engines 12/05+VW Passat 2.0 TDI – BWV, BE, BMA, BKP engines 03/05+VW Touran 1.9, 2.0 TDI AVQ, BKC, BXE, BXF, BRU, BKD, AZV engines 08/03+ Product Category Exhaust Decat Exhaust Decat - Length (mm) 1180 Exhaust Decat - Pipe Bore (mm) 57
£130.00
Trim Removal Tool - 3 Piece Kit
3 Piece trim removal tool kit. Ideal for those little jobs, We use these for installing sequential indicators and fog light guards as they work great at removing mirror caps and fog surrounds All 3 tools are the same size with 1 narrow end.
£1.80£1.50
Replacement H7 HID Bulb
Price is for 1 single bulb H7 Replacement HID Bulb for almost any HID Kit, including our Enhanced & Ultimate Kits Perfect replacement for a bulb that has given up the ghost or just doesn't seem as bright any more! Available in 5000k or 6000k - Price is for 1 Single Bulb Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Depending on batch, live cable may be red or blue, so please don’t be concerned if the picture shows a blue cable and yours is red - the product is the same. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering.
£18.01£15.00
Racingline RacingLine Replacement Rotors Only - STAGE 2 AND STAGE 3 BIG BRAKE KITS
Racingline Replacement 352mm Rotors - STAGE 3 - VWR680000These replacement Rotors come without bells ready to build onto the original bells of your 2013-2016 Volkswagen Racing 6-Pot Brake kit.Please note: They are not compatible with the Other generations of Racingline Big Brake Kit. Racingline Replacement 360mm Rotors - STAGE 3 - VWR680001 These replacement Rotors come without bells ready to build onto the original bells of your 2016-2018 Racingline 6-Pot Brake kit.Please note: They are not compatible with the Other generations of Racingline Big Brake Kit. Racingline 345mm Replacement Rotors (Complete) - STAGE 2 - VWR680002These replacement rotors are suitable for the Racingline 'Stage 2' Brake Kit for the PQ35 Platform and MQB Platform ModelsSold as a Pair of Rotors.- The discs have a new thickness of 30mm- The min thickness is 28mm- The max wear thickness is 1.4mm per side Racingline Replacement 355mm Rotors - STAGE 3 - VWR680003These replacement Rotors come without bells ready to build onto the original bells of your Current Generation 355mm Racingline Stage 3 Big Brake Kit.- The discs have a new thickness of 32mm- The min thickness is 30mm- The max wear thickness is 1.4mm per sidePlease note: They are not compatible with the Older generations of Racingline Big Brake Kit. Racingline Replacement 380mm Rotors - STAGE 3 - VWR680004These replacement Rotors come without bells ready to build onto the original bells of your Current Generation 380mm Racingline Stage 3 Big Brake Kit.- The discs have a new thickness of 32mm- The min thickness is 30mm- The max wear thickness is 1.4mm per sidePlease note: They are not compatible with the Older generations of Racingline Big Brake Kit.
£491.40 - £655.20
ChromoLite Silver Indicator Bulb - 382
CEUK ChromoLite Indicator Upgrade Tired of the orange look of your current indicator bulbs? Want something different? Well here you go! Our indicator bulbs are a mirror reflective silver colour, But still glow Bright Orange. Not only are they brighter than standard, but they enhance the look of your car dramatically by taking away the horrible orange of factory bulbs! These bulbs are the offset pin type, please check they are correct for your car before ordering. Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£8.00 - £15.01
Chaser Edition RGB Footwell Kit - Universal Fit ANY Car
Description Now we give you the Chaser Edition Bluetooth footwell strip kit This kit is for any car, simply tell us in the description what fuse type you have in your glove box fuse holder and we will send it out! with over 600 static colours, and 200 “Fluid” colour changing and dancing modes this really is a game changer Controlled fully by your mobile phone using Bluetooth and our fantastic control app all the functions are controlled by you! Powered by your ignition the strip will come on as soon as you start your car and remain on until the ignition is switched off, The kit utilises your passenger footwell fuse box for power What’s in the Box? Footwell Strip Wiring Loom Bluetooth Control Module Instructions Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Glove Box strip not included - This is for other Models - Images are catalogue images Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.
£66.00£55.00