Performance - Skoda Rapid (2012-Present)

Custom Car Number Plate Keyring – Personalised Reg Plate Keyring for Car Enthusiasts Add a personal touch to your keys with our Custom Number Plate Keyring, designed to replicate your actual car registration plate. Whether you're a proud car owner, collector, or just love a bit of custom flair, this keyring is the perfect accessory to show off your pride and joy. ✅ Customisable with your exact number plate✅ Durable Dual Layer 6mm acrylic construction✅ Colour Customisable for maximum visibility✅ Ideal gift for car lovers, new drivers or clubs✅ Lightweight yet strong – built to last Why choose our number plate keyring? Each keyring is made to order using high-quality materials that ensure long-lasting colour and detail. It’s lightweight enough for everyday use, yet tough enough to handle daily wear and tear. The miniature plate design mirrors UK registration plates, giving it a premium and authentic look. Choose whatever colour Face plate and back plate you want to give you a truly customised look. Perfect for: Personal use Gifts for new car owners Car club merchandise Show & shine accessories  

Read more less

Higher Output Ignition Coils.for all Volkswagen I Audi I Skoda I Seat with:1.0 TSI EA211 / 1.2 TSI EA211 /1.4 TSI EA211 / 1.4 Hybrid For your 1.0 / 1.2 / 1.4 TSI, RacingLine's Higher Output Ignition Coils deliver greater energy output, ensuring a stronger and more consistent spark. A simple plug-and-play upgrade over the OE factory coils.VWR900004 (individual coil pack) What do they do?The RacingLine Higher Output Ignition Coils are a direct plug-and-play upgrade from your OE ignition coils. Whether your engine is standard or Stage 3 tuned, it will immediately benefit from the greater energy output and stronger, more consistent spark generated by a set of RacingLine Coil Packs. The RacingLine Higher Output Ignition Coils deliver a 10% increase in output energy versus OE. This greater output is perfect for drivers looking to maximise output from either their stock or modified car.  Why have we settled on a 10% gain in output energy for our Coil Packs? Because this is the optimum increase level for VWG's smaller capacity TSI engines. Beyond this, no additional benefit is gained, yet the coil's internal temperatures begin to rise sharply. So, at this level, our Coil Packs can maintain coil voltage under load with little or no drop-off, performing consistently from idle through to the shift point or red-line. Replacement is all the more worthwhile on older engines still running the OE Coil Packs. A new set makes a great preventative maintenance upgrade to avoid the risk of misfires caused as the OE Coil Packs age and gradually break down. Fitment couldn't be easier. These are a simple plug and play replacement. Remove the OE Coil Packs, replace with our Higher Output versions. Confirmed applications VWR900004 – RED   All vehicles fitted with the following engines: 1.0 TSI : EA211 1.2 TSI : EA211 1.4 TSI : EA211 1.4 Hybrid : EA211 1.6 MPI : EA211   Sold individually.  Most popular models with these engines include: > VW Golf 8 & 8.5 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Up! GTI 2016+ > VW Up! 1.0 TSI 2016+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > VW Polo 5 6C/6R 2008-2018 > VW Polo 6 AW 2017+ > VW T-Cross 2017+ > Audi A1 2010-2018 > Audi A1 GB 2019+ > Audi A3 8Y & 8Y.2 2020+ > Audi A3 8V 2013-2020 > Audi Q3 2019+ > Audi Q2 2017+ > SEAT Ibiza 6J 2008-2017 > SEAT Ibiza 6F 2017+ > SEAT Leon 4 & 4.5 FW 2020+ > SEAT Leon III 5F 2015-2020 > SEAT Ateca 2016+ > SEAT Arona 2017+ > SEAT Toledo 2012+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+ > Skoda Fabia IV 2021+ > Skoda Karoq 2017+ > Skoda Rapid 2017+ > Skoda Kamiq 2019+ > Skoda Scala 2019+ > Skoda Kodiaq 2018+   What do Coil Packs do?A Coil Pack's function is to transform the car battery’s 12-volt output to a much higher voltage. This intensified electrical energy provides a more reliable source for your spark plug to function from, improving engine performance by igniting the fuel and air mixture more efficiently. We've spend a lot of our development time optimising the Coil Pack's energy levels to ensure operating temperatures are controlled. Over the lifecycle of our Coil Pack, this thermal management will help to prevent future break down.  Coil Packs that generate higher than 10% over OE will overheat and deteriorate over time. We've increased energy output gain to a level that will keep coils as cool as possible for as long as possible. This level of increase represents the 'sweet spot' of the diminishing returns of how much additional energy can benefit the spark strength versus the rapid increase in  internal temperatures for long term reliability and performance.

Read more less

With the success of FMINDK30 we took the opportunity to revisit the UP GTI and looked to see if we could improve on the 1.0 TSI air flow to the turbo charger. On investigation we could see that the OEM turbo adaptor was very restrictive and was an area in need for improvement. Therefore, our highly skilled development team got to work designing a solution to maximize the capacity by using our CAD system and physical prototypes. The OEM plastic turbo inlet includes a restrictive ribbed and hollow noise chamber that is designed to disturb the air flow and reduce induction noise, this OEM part has a detrimental effect to the engines performance especially when tuned. For the best possible gains, we removed the chamber allowing us to increase the volume and air flow significantly. Our hose design also has an internal stepped area where it is positioned and joined to the turbo housing, this is to ensure the transition is as smooth as possible from the inlet tract to the turbo. Several different designs and material choices were tested until we arrived with the product you see here. The construction of FMTIA3 is manufactured from reinforced multi ply silicone which is more durable than the OEM plastic pipe and it will also not suffer from heat soak like other similar products available. With its enlarged capacity and less restrictive surface area it routes air directly into your turbo charger and allows a greater volume of air to be compressed, this can have a positive effect on accelerating your vehicle after long deceleration or in between gear changes due to more air being kept within the inlet tract to the turbo charger. One significant feature of FMTIA3 is its compatibility with vehicles equipped with and without the PCV system integrated into the existing turbo intake, the early engines do not have the breather system in place from the fuel tank to the elbow. We supply the necessary hardware to blank of the elbow spouts if its required to fit the turbo inlet adaptor to the earlier engine revision The one way valve and coupler adaptor are also supplied so the elbow can be installed to the newer revised engine. The FMTIA3 is also compatible with the factory air box, however for the best performance results we recommend using our intake systems for your particular chassis application.   This is a product which is essential when tuning the 1.0 TSI engine, if its either stage one or stage two tuning we have seen consistent gains from 3-5 bhp depending on the vehicles state of tune. This is a straightforward yet very effective power increasing modification that can be fitted with basic tools and has a typical installation time of around 60 minutes. As with all Forge products it includes a full set of comprehensive installation instructions to make fitting as straightforward as possible. The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically Increased capacity  No engine check lights (EML) Increased air flow Lifetime warranty* FITS: >> AudiA1A1 (8X) 2010-20181.0 TSI 2015-2021 A1 (GB) 2018-1.0 TSIA31.0TSI>> SeatArona1.0 TSIIbizaMk5 (KJ) 2017 - late 20211.0 TSILeonMk3 2012-20201.0 TSI 2015-2020Toledo1.0 TSI >> SkodaFabiaNJ 2014-20211.0 TSI Octavia1.0 TSI (2018-2021)Rapid1.0 TSI>> VolkswagenGolfMK71.0 TSIMK7.51.0 TSIPolo1.0 TSI T-Roc1.0 116PSUp1.0 GTI/TSI

Read more less

The price is for ONE PAIR of spacers - if you wish to do all 4 spacers, you need to order QTY x2 All prices INCLUDE Longer Bolts where required.  The Wheel Spacers Detailed Below Also fits the following Vehicles: Manufacturer Vehicle Model Year AUDI A1 A1 SPORTBACK (GBA) 07.18 - AUDI A3 A3 / S3 / RS3 (8P1) 05.03 -08.12 AUDI A3 A3 / S3 / RS3 (8V) 04.12 - 10.20 AUDI A3 A3 / S3 / RS3 (8Y) 04.20 - AUDI A4 A4 / S4 / RS4 (B6) 11.00 - 12.04 AUDI A4 A4 / S4 / RS4 (B7) 11.04 - 06.08 AUDI A6 A6 / S6 / RS6 (C5) 01.97 - 01.05 AUDI A6 A6 / S6 / RS6 (C6) 05.04 - 03.11 AUDI A8 A8 (4D2, 4D8) 03.94 - 12.02 AUDI A8 A8 (4E_) 10.02 - 07.10 AUDI Q2 Q2 / SQ2 (GAB) 06.16 - AUDI Q3 Q3 / SQ3 / RSQ3 (8UB, 8UG) 06.11 - 10.18 AUDI Q3 Q3 / SQ3 / RSQ3 (F3B) 07.18 - AUDI Q4 Q4 (F4B) 03.21 - AUDI TT TT / TTS / TTRS (8J3) 08.06 - 06.14 AUDI TT TT / TTS / TTRS (8S) 07.14 - CUPRA ATECA ATECA (KH7) 09.18 - CUPRA BORN BORN (K11) 08.21 - CUPRA FORMENTOR FORMENTOR (KM7) 07.20 - CUPRA LEON LEON (KL1, KU1) INC ST 09.20 - FORD GALAXY GALAXY (WGR) 03.95 - 05.06 MG MG5 MG5 Kombi / MG5 Estate 10.20 - MG MG6 II MG6 II 11.17 - 12.19 SEAT ALHAMBRA ALHAMBRA (7V8, 7V9) 04.96 - 03.10 SEAT ALHAMBRA ALHAMBRA (710, 711) 06.10 - SEAT ALTEA ALTEA (5P1) 03.04 - SEAT ALTEA ALTEA XL (5P5, 5P8) 10.06 - SEAT ATECA ATECA (KH7) 04.16 - SEAT ARONA ARONA (KJ7) 07.17 - SEAT EXEO EXEO (3R2) 12.08 - SEAT EXEO EXEO ST (3R5) / EXEO STATION WAGON (3R5) 05.09 - SEAT IBIZA IBIZA V (KJ1) 01.17 - SEAT LEON LEON (1P1) 05.05-12.12 SEAT LEON LEON (5F1) INC ST 09.12 - SEAT LEON LEON (KL1) INC ST 11.19 - SEAT TARRACO TARRACO (KN2_) 09.18 - SEAT TOLEDO TOLEDO III (5P2) 04.04 - 05.09 SEAT TOLEDO TOLEDO IV (KG3) 07.12 - SKODA ENYAQ ENYAQ iV COUPE 05.22 - SKODA FABIA FABIA IV (PJ3) 06.21 - SKODA KAMIQ KAMIQ (NW4) 07.19 - SKODA KAROQ KAROQ (NU7) 07.17 - SKODA KODIAQ KODIAQ (NS7) 10.16 - SKODA KODIAQ KODIAQ (PS7) 01.24 - SKODA OCTAVIA OCTAVIA II (1Z3) 02.04 - 06.13 SKODA OCTAVIA OCTAVIA III (5E3, NL3, NR3) 11.12 - SKODA OCTAVIA OCTAVIA IV (NX3) 01.20 - SKODA RAPID RAPID (NH3) 07.12 - SKODA SCALA 02.19 - SKODA SUPERB SUPERB II (3T4) 03.08 - SKODA SUPERB SUPERB III (3V3) 03.15 - SKODA SUPERB SUPERB IV KOMBI (NZ5) / ESTATE (NZ5) 11.23 - SKODA YETI YETI (5L) 05.09 - VW ARTEON ARTEON (3H7, 3H8) 04.17 - VW BEETLE BEETLE (5C1) 04.11 - VW CADDY MK3 03.04 - VW CADDY MK4 05.15 - VW CADDY MK4 09.20 - VW CC 11.11 - 12.16 VW EOS EOS (1F7, 1F8) 03.06 - VW GOLF V MK5 10.03 - 02.09 VW GOLF VI MK6 01.05 - 12.13 VW GOLF VII MK7 08.12 - VW GOLF VIII MK8 11.20 - VW ID.3 ID.3 (E11) 11.19 - VW ID.4 ID.4 (E21) 09.20 - VW ID.5 ID.5 (E39) 07.21 - VW ID.7 ID.7 (ED) 06.23 - VW ID.BUZZ ID.Buzz Bus (EBB/EBA) 05.22 - VW JETTA JETTA III (1K2) 08.05 - 10.10 VW JETTA JETTA IV (162) 04.10 - VW PASSAT PASSAT (3B2) 08.96 - 12.01 VW PASSAT PASSAT (3B3) 11.00 - 08.05 VW PASSAT PASSAT (3C2) 03.05 - VW PASSAT PASSAT CC (357) 05.08 - 01.12 VW PASSAT PASSAT (3G2) 08.14 - VW PASSAT B9 10.23 - VW PHAETON PHAETON (3D_) 04.02 - VW POLO POLO (AW1, BZ1) 06.17 - VW SCIROCCO MK3 05.08 - VW SHARAN SHARAN (7M8, 7M9, 7M6) 05.95 - 03.10 VW SHARAN SHARAN (7N1, 7N2) 05.10 - VW T-CROSS T-CROSS (C11_) 12.18 - VW T-ROC T-ROC (A11) 07.17 - VW TAIGO TAIGO (CS1) 09.21 - VW TIGUAN TIGUAN (5N_) 09.07 - VW TIGUAN TIGUAN (AD1) 02.16 - VW TIGUAN TIGUAN (CT1) 09.23 - VW TOURAN TOURAN (1T1, 1T2) 02.03 - 05.10 VW TOURAN TOURAN (1T3) | GOLF TOURAN 05.10 - 05.15 VW T4 T4 09.90 - 04.03 The Table Below Shows Each Spacer Size & System: Spacer Width Total Car Widening System Number 5mm 10mm 1 8mm 16mm 2 10mm 20mm 2 12mm 24mm 2 15mm 30mm 2 18mm 36mm 2 20mm 40mm 2 20mm 40mm 7 22mm 44mm 2 25mm 50mm 7 30mm 60mm 7

Read more less

This is a performance enhancing induction kit for the VAG 1.2 & 1.4 TSI TFSI EA211 engine. This may fit other VAG vehicles with this engine, please see vehicle fitment compatibility chart. Features Improved throttle response Reduced turbo lag Turbocharger feels more responsive Enhanced BOV sounds What Does It Do? This induction kit delivers increased air flow over the standard restrictive part. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black powdercoated turbo inlet pipe Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2014-2018 Audi A1 (8X) 1.2 TFSI 2014-2019 Skoda Octavia (MK3) 1.2 TSI 2014-2019 Seat Toledo (KG) 1.2 TSI 2014-2019 Seat Leon (MK3) 1.2 TSI 2014-2019 Seat Ibiza (6J/6P) 1.2 TSI 2014-2019 Skoda Rapid (NH) 1.2 TSI 2014-2019 Skoda Yeti (5L) 1.2 TSI 2014-2019 Skoda Fabia (NJ) 1.2 TSI 2014-2019 VW Golf (MK7) 1.2 TSI 2014-2019 VW Touran (MK2) 1.2 TSI 2014-2019 VW Beetle (A5) 1.2 TSI 2014-2019 VW Caddy (MK4) 1.2 TSI 2014-2019 VW Polo (6R/6C) 1.2 TSI 2014-2019 VW Jetta (A6) 1.2 TSI 2014-2019 Audi A3 (8V) 1.2 TSI 2014-2019 Audi Q3 (8UB/8UG) 1.4 TFSI 2014-2018 Audi A1 (8X) 1.4 TFSI 2014-2019 Audi Q2 (GA) 1.4 TFSI 2014-2019 Audi A3 (8V) 1.4 TFSI 2014-2019 Seat Toledo (KG) 1.4 TSI 2014-2019 Seat Alhambra (MK2) 1.4 TSI 2014-2019 Seat Ateca (KH) 1.4 TSI 2014-2019 Seat Leon (MK3) 1.4 TSI 2014-2019 Seat Ibiza (6J/6P) 1.4 TSI 2014-2019 Skoda Octavia (MK3) 1.4 TSI 2014-2019 Skoda Superb (MK3) 1.4 TSI 2014-2019 Skoda Rapid (NH) 1.4 TSI 2014-2019 Skoda Yeti (5L) 1.4 TSI 2014-2019 Skoda Fabia VRS (NJ) 1.4 TSI 2014-2019 Skoda Kodiaq (NS) 1.4 TSI 2014-2019 VW Golf (MK7) 1.4 TSI 2014-2019 VW Tiguan (5N) 1.4 TSI 2014-2019 VW Tiguan (AD/BW) 1.4 TSI 2014-2019 VW Tiguan Allspace (AD/BW) 1.4 TSI 2014-2019 VW Passat (3G) 1.4 TSI 2014-2019 VW Beetle (A5) 1.4 TSI 2014-2019 VW Caddy (MK4) 1.4 TSI 2014-2019 VW Passat (CC) 1.4 TSI 2014-2019 VW Polo (6R/6C) 1.4 TSI 2014-2019 VW Touran (MK2) 1.4 TSI 2014-2019 VW Polo Blue GT (6R/6C) 1.4 TSI 2014-2019 VW Scirocco (MK3) 1.4 TSI 2014-2019 VW Sharan (MK2) 1.4 TSI 2014-2019 VW Jetta (A6) 1.4 TSI

Read more less

This is a performance silicone intake hose for 1.2 & 1.4 TSI TFSI EA211 engine. This kit fits other VAG vehicles with this engine, please see vehicle fitment compatibility chart. Features Improved throttle response Silicone inlet pipe Dyno results: max gains 5-7bhp (this may vary dependant on vehicle) What Does It Do? This induction silicone intake hose delivers increased air flow over the standard restrictive part. Whether this hose is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black silicone inlet pipe Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2014-2018 Audi A1 (8X) 1.2 TFSI 2014-2019 Skoda Octavia (MK3) 1.2 TSI 2014-2019 Seat Toledo (KG) 1.2 TSI 2014-2019 Seat Leon (MK3) 1.2 TSI 2014-2019 Seat Ibiza (6J/6P) 1.2 TSI 2014-2019 Skoda Rapid (NH) 1.2 TSI 2014-2019 Skoda Yeti (5L) 1.2 TSI 2014-2019 Skoda Fabia (NJ) 1.2 TSI 2014-2019 VW Golf (MK7) 1.2 TSI 2014-2019 VW Touran (MK2) 1.2 TSI 2014-2019 VW Beetle (A5) 1.2 TSI 2014-2019 VW Caddy (MK4) 1.2 TSI 2014-2019 VW Polo (6R/6C) 1.2 TSI 2014-2019 VW Jetta (A6) 1.2 TSI 2014-2019 Audi A3 (8V) 1.2 TSI 2014-2019 Audi Q3 (8UB/8UG) 1.4 TFSI 2014-2018 Audi A1 (8X) 1.4 TFSI 2014-2019 Audi Q2 (GA) 1.4 TFSI 2014-2019 Audi A3 (8V) 1.4 TFSI 2014-2019 Seat Toledo (KG) 1.4 TSI 2014-2019 Seat Alhambra (MK2) 1.4 TSI 2014-2019 Seat Ateca (KH) 1.4 TSI 2014-2019 Seat Leon (MK3) 1.4 TSI 2014-2019 Seat Ibiza (6J/6P) 1.4 TSI 2014-2019 Skoda Octavia (MK3) 1.4 TSI 2014-2019 Skoda Superb (MK3) 1.4 TSI 2014-2019 Skoda Rapid (NH) 1.4 TSI 2014-2019 Skoda Yeti (5L) 1.4 TSI 2014-2019 Skoda Fabia VRS (NJ) 1.4 TSI 2014-2019 Skoda Kodiaq (NS) 1.4 TSI 2014-2019 VW Golf (MK7) 1.4 TSI 2014-2019 VW Tiguan (5N) 1.4 TSI 2014-2019 VW Tiguan (AD/BW) 1.4 TSI 2014-2019 VW Tiguan Allspace (AD/BW) 1.4 TSI 2014-2019 VW Passat (3G) 1.4 TSI 2014-2019 VW Beetle (A5) 1.4 TSI 2014-2019 VW Caddy (MK4) 1.4 TSI 2014-2019 VW Passat (CC) 1.4 TSI 2014-2019 VW Polo (6R/6C) 1.4 TSI 2014-2019 VW Touran (MK2) 1.4 TSI 2014-2019 VW Polo Blue GT (6R/6C) 1.4 TSI 2014-2019 VW Scirocco (MK3) 1.4 TSI 2014-2019 VW Sharan (MK2) 1.4 TSI 2014-2019 VW Jetta (A6) 1.4 TSI

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:70mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:76mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:83mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:90mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This filter is designed to be fitted to the outside of a rigid pipe such as a MAF sensor housing. These filters have an rubber polymer neck and a cone shaped filter element. This enables easy fitting to space-restricted engine compartments, whilst providing a large surface to maximise potential air flow. The filters are constructed using stainless steel cage internal and our famous 15mm thick twin layer foam.  Ramair universal filters are designed and manufactured for a very diverse range of applications and are made here in the UK. They are available in many different sizes and styles available.  Clean using our filter maintenance kit - CK-003 This product has the following dimensions: Filter Internal Neck Diameter: You choose Filter Neck Length: 23mm Filter Overall Height: 130mm Filter Base Width: 150mm Filter Top Width: 93mm Filter Material: 15mm Dual Layer Foam

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This filter is designed to be inserted into a flexible hose such as a rubber or silicone intake pipe. These filters have an aluminium ram-pipe neck and a cone shaped filter element. This integral cone channels all the incoming air, towards the inlet manifold, and in doing so, reduces unnecessary turbulence. These filters are also cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of pleated surface area an added boost of power to your engine too! These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of motorsport filtration the pleated range by Ramair is the premium choice on the market today for your fast road or track car. With its large size, technologically advanced filter and bell mouth alloy spun base this filter kit is capable of handling extremely large power & flow rates. Filter Outer Neck Diameter: Select Your Option Filter Neck Length: 45mm (1.8inch) Filter Overall Length: 185mm (7.3inch) Filter Base Width: 150mm (5.9inch) Filter Top Width: 120mm (4.7inch) Filter Material: Pleated Nanofibre Filter Base Material: Aluminium Filter Base Finish: Black Powder Coat

Read more less

This Performance intake kit is designed to fit the MK7 Volkswagen Golf, Audi, Seat Leon, and Skoda that have the EA211 - 1.4 TSI/TFSI engine. Features 70mm intake diameter Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions Easy to clean using our filter maintance kit - CK-003 What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits, see below for what this kit will include: Black powder coated heat shield Ramair Foam Filter Black powder coated aluminium intake pipe PVC intake ducting Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2014-2019 Audi Q3 (8UB/8UG) 1.4 TFSI 2014-2018 Audi A1 (8X) 1.2 TFSI 2014-2018 Audi A1 (8X) 1.4 TFSI 2014-2019 Audi Q2 (GA) 1.4 TFSI 2014-2019 Skoda Octavia (MK3) 1.2 TSI 2014-2019 Seat Toledo (KG) 1.4 TSI 2014-2019 Seat Toledo (KG) 1.2 TSI 2014-2019 Seat Alhambra (MK2) 1.4 TSI 2014-2019 Seat Ateca (KH) 1.4 TSI 2014-2019 Seat Leon (MK3) 1.2 TSI 2014-2019 Seat Leon (MK3) 1.4 TSI 2014-2019 Seat Ibiza (6J/6P) 1.4 TSI 2014-2019 Seat Ibiza (6J/6P) 1.2 TSI 2014-2019 Skoda Octavia (MK3) 1.4 TSI 2014-2019 Skoda Superb (MK3) 1.4 TSI 2014-2019 Skoda Rapid (NH) 1.4 TSI 2014-2019 Skoda Rapid (NH) 1.2 TSI 2014-2019 Skoda Yeti (5L) 1.2 TSI 2014-2019 Skoda Yeti (5L) 1.4 TSI 2014-2019 Skoda Fabia VRS (NJ) 1.4 TSI 2014-2019 Skoda Kodiaq (NS) 1.4 TSI 2014-2019 Skoda Fabia (NJ) 1.2 TSI 2014-2019 VW Golf (MK7) 1.2 TSI 2014-2019 VW Golf (MK7) 1.4 TSI 2014-2019 VW Tiguan (5N) 1.4 TSI 2014-2019 VW Touran (MK2) 1.2 TSI 2014-2019 VW Tiguan (AD/BW) 1.4 TSI 2014-2019 VW Tiguan Allspace (AD/BW) 1.4 TSI 2014-2019 VW Passat (3G) 1.4 TSI 2014-2019 VW Beetle (A5) 1.2 TSI 2014-2019 VW Caddy (MK4) 1.2 TSI 2014-2019 VW Beetle (A5) 1.4 TSI 2014-2019 VW Caddy (MK4) 1.4 TSI 2014-2019 VW Passat (CC) 1.4 TSI 2014-2019 VW Polo (6R/6C) 1.2 TSI 2014-2019 VW Polo (6R/6C) 1.4 TSI 2014-2019 VW Touran (MK2) 1.4 TSI 2014-2019 VW Polo Blue GT (6R/6C) 1.4 TSI 2014-2019 VW Scirocco (MK3) 1.4 TSI 2014-2019 VW Sharan (MK2) 1.4 TSI 2014-2019 VW Jetta (A6) 1.4 TSI 2014-2019 VW Jetta (A6) 1.2 TSI 2014-2019 Audi A3 (8V) 1.2 TSI 2014-2019 Audi A3 (8V) 1.4 TFSI

Read more less

This performance intake kit is designed to fit the VW 1.0 TSI platform. For full compatibility please check list below. Features Easy to maintain with our filter maintenance kit – CK-003 Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits, see below for what this kit will include: Black powder coated heat shield Proram pleated filter Black powder coated aluminium intake pipe Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2015-2018 Audi A1 (8X) 1.0 TFSI 2016-2020 Audi A3 (8V) 1.0 TFSI 2017-2025 Seat Arona (KJ) 1.0 TSI 2016-2025 Seat Ateca (KH) 1.0 TSI 2015-2020 VW Caddy (MK4) 1.0 TSI 2014-2022 Skoda Fabia (MK3) 1.0 TSI 2015-2020 VW Golf (MK7) 1.0 TSI 2019-2025 Skoda Kamiq (NW) 1.0 TSI 2017-2025 Skoda Karoq (NU7/ND7) 1.0 TSI 2015-2020 Seat Leon (MK3) 1.0 TSI 2016-2020 Skoda Octavia (MK3) 1.0 TSI 2017-2025 VW Polo (AW) 1.0 TSI 2017-2019 Skoda Rapid (NH) 1.0 TSI 2016-2020 Audi Q2 (GA) 1.0 TFSI 2019-2025 Skoda Scala (NW) 1.0 TSI 2018-2025 VW T-Cross (MK1) 1.0 TSI 2019-2025 VW T-Roc (MK1) 1.0 TSI 2017-2019 Seat Toledo (MK4) 1.0 TSI 2015-2017 Seat Ibiza (MK4) 1.0 TSI 2018-2025 Seat Ibiza (MK5) 1.0 TSI

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

Custom 4D Number Plate Tags – Pair | Fully Legal | Any Colour & Logo Add a bold, custom touch to your UK number plates with our CEUK 4D Number Plate Tags – fully road legal and made to match or enhance your 4D plates. These are not just stickers – they’re premium, 3mm acrylic tags with a raised 4D effect, available in any colour and logo combination you choose. Designed to stick to the left side of your number plate using weatherproof backing tape, these tags offer a fully customisable and stylish upgrade that complies with UK number plate regulations. ✅ Key Features: Sold as a Pair – includes 2x matching tags 100% Road Legal – 50mm wide to comply with DVLA size regulations Fully Customisable:• Choose tag colour• Choose logo/emblem• Choose logo orientation• Choose logo colour Weatherproof & Durable – designed to last in UK conditions Easy Fit – pre-applied adhesive for quick install 🛠️ Size Options: Option 1 – Standard Plates (No Frame): • H 110mm x W 50mm x T 3mm• Designed to fully cover the corner of any number plate without a frame Option 2 – Plates with Surround Frame: • H 100mm x W 47mm x T 3mm• Slightly smaller to fit inside plate frames (may leave a small border) 💡 Note: Fit may vary slightly due to universal design. See product images for visual examples. Looking for something completely custom? Contact us at support@ceuk.org and our in-house design team will be happy to help you create a truly unique tag!

Read more less

Custom 4D Number Plate Tags – Fully Legal Acrylic Pair | Multiple Colours & Logos Take your number plate styling to the next level with CEUK’s Custom 4D Number Plate Tags – designed to perfectly complement 4D number plates, but also compatible with any standard UK number plate. Crafted from 3mm premium acrylic, these tags are 100% road legal at just 50mm wide, and adhere easily to the left-hand side of your plate using pre-applied, weatherproof adhesive backing. Sold as a pair (2 tags), each set is fully customisable to match your build’s style. 🎨 Customisation Options: Choose your tag colour Choose your logo or emblem Choose the logo orientation Choose the logo colour 📏 Size Options: Option 1 – For Plates Without Frames: • H 110mm x W 50mm x T 3mm• Designed to fully cover the plate’s left edge — ideal for plates fitted directly to the car. Option 2 – For Plates With Surround/Holder: • H 100mm x W 47mm x T 3mm• Slightly smaller to fit cleanly within most number plate holders (see sizing disclaimer below). ✅ Key Features: Sold as a pair (2 tags included) Legal under UK number plate regulations Premium laser-cut acrylic (3mm thick) Weatherproof adhesive – pre-applied for easy install Designed and made in the UK by CEUK Perfect for adding personal or branded touches to your plate setup ⚠️ Disclaimer: Full-size tag (Option 1) is universal and may slightly overlap corners depending on plate shape — designed to fully cover edge areas. Smaller tag (Option 2) may leave a 1–2mm border between the tag and frame depending on your holder’s dimensions. 📩 Want Something Completely Custom? No problem — just email support@ceuk.org, and our design team will help bring your idea to life.

Read more less

Enhanced Edition H7 Mini LED Bulbs – Ultra Compact, 6000Lm Output (6000K Ice White) All the power of our popular V3 LED Bulb – in a compact, low-profile design.Introducing the Enhanced Edition H7 Mini, designed to deliver exceptional brightness and clarity while eliminating the bulk of traditional LED upgrades. This is the perfect solution for tight-fit housings or vehicles with limited rear clearance. Ideal for dipped beam, high beam, or fog light applications, the H7 Mini fits any vehicle using a standard H7 fitting – no adapters, clips, or caps required. 💡 Why Choose the H7 Mini? Massive 6000Lm per bulb output – crisp 6000K Ice White Micro-sized cooling fan built into the shaft – no bulky heat sink Zero polarity issues – 4-point design works in multiple orientations Plug & Play Installation – fits directly into H7 sockets with no mods Compatible with projector and reflector housings ⚙️ Technical Specs: Voltage: 12V Wattage: 28W LED Chip: 3570 Colour Temperature: 6000K (Ice White) Lumen Output: 6000Lm per bulb Fitment: H7 (replaces OEM halogen) 📦 What's in the Box: 2x H7 Mini Enhanced Edition LED Bulbs Default colour: 6000K Ice White Supplied with 12-month CEUK warranty (keep packaging if longer warranty is stated) ⚠️ Vehicle Fitment Note: While this bulb fits all standard H7 sockets, spec-level variants (e.g. Ford ST, VW GTI) may use different housings. Please confirm bulb type before ordering by checking your existing unit. Installing LEDs may trigger a dashboard bulb error on some vehicles. This is harmless and explained in our FAQs.

Read more less

Enhanced Edition H8/H11 Mini LED Bulbs – Ultra Bright, Compact Fit (6000K Ice White, 6000Lm) All the power of our V3 LED bulb – in a sleek, compact design.Introducing the CEUK Enhanced Edition H8/H11 Mini LED Bulbs, engineered for maximum output and perfect fitment in tight headlight or fog light housings. These bulbs deliver a massive 6000Lm per bulb and feature a compact heat management system – ideal for modern vehicles where space is limited. Compatible with H8 and H11 fitments, these bulbs are perfect for fog lights, dipped beams, or high beam upgrades, delivering clear, crisp 6000K Ice White light with superior reliability. 💡 Key Features: 6000Lm Output Per Bulb – 6x brighter than most OEM halogens Ultra-Compact Design – mini cooling fan built into the shaft, no bulky heat sink Plug & Play Fitment – no adapters, clips, or caps needed 12V, 28W Power Efficiency Zero Polarity Issues – works in any orientation Suitable for Projector & Reflector Housings Safe for OEM Components – no CANBUS interference on most vehicles ⚙️ Technical Specs: Voltage: 12V Wattage: 28W LED Chip: 3570 Colour Temperature: 6000K Ice White Lumen Output: 6000Lm per bulb Fitment: H8 / H11 📦 What’s in the Box: 2x H8/H11 Enhanced Edition LED Bulbs (6000K Ice White) CEUK 12-Month Warranty (retain packaging if warranty is extended) ⚠️ Fitment Note: Always double-check your vehicle's bulb type – special editions (e.g., Ford ST, VW GTI) may differ from standard specs. Some vehicles may display a dashboard error message when LEDs are installed – this is harmless and addressed in our FAQs.

Read more less

For hydraulic brake and clutch systems. Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3) Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual. Min. dry boiling point 260°C. Min. wet boiling point 165°C Notice Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs. Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water.  DOT 4 Technical Info Contents 500 ml Colour Pale Amber Chemical basis Butoxyethanol Shelf life from production 36 Month Min. wet boiling point 165 °C Min. dry boiling point 260 °C Density 1.052 g/ml Density conditions at 20°C pH value 7-11

Read more less

PFC13-14 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 13-14mm --- PFC15-16 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 15-16mm --- PFC17-18 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 17-18mm --- PFC19-20 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 19-20mm --- PFC21-22 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 21-22mm --- PFC23-24 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 23-24mm --- PFC25-27 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 25-27mm --- PFC28-30 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 28-30mm --- PFC31-33 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 31-33mm

Read more less

Enhanced Edition H1 LED Headlight Bulbs – 6000K Ice White | 20,000Lm | Direct Fit Experience unmatched brightness and clarity with the CEUK Enhanced Edition H1 LED Bulbs – designed for performance, built for simplicity. This powerful LED upgrade delivers a sharp, clean 6000K ice white output with a total output of 20,000 lumens, offering a drastic improvement over standard halogen H1 bulbs. ⚠️ Important: These are not suitable for cornering light applications. 🚀 Vision, Without Restriction We've engineered a direct-fit, no-fuss H1 LED solution that doesn't require any wire splicing, adapters, or awkward metal clips. Unlike many aftermarket options, CEUK’s H1 LEDs are built to fit into standard halogen bulb slots using the existing connectors and mounting points — just like OEM. Perfect for night drives, low-light conditions, or simply modernising your lighting setup, these bulbs are ideal for those who want high performance without the hassle. 💡 Why Upgrade to CEUK H1 LEDs? ✅ Direct OEM Fit – No clips, wiring mods, or converters ✅ 6000K Ice White Output – Modern, premium look ✅ Up to 20,000 Lumens Total Output – Huge visibility gain ✅ 50W Power Draw Per Bulb – Bright, but safe for OEM harnesses ✅ Projector & Reflector Compatible – Versatile installation ✅ No Flickering or Overheating – Optimised for daily driving ✅ Reduced Eye Strain – Crisp light that mimics daylight ✅ Quick & Easy Install – Designed with DIY installers in mind ⚙️ Technical Specifications: Spec Value Voltage 12V Wattage 50W per bulb Colour Temp 6000K (Ice White) Brightness 10,000Lm per bulb (20,000Lm total) Fitment H1 (Standard Halogen Socket) 📦 What You’ll Receive: 2x CEUK Enhanced Edition H1 LED Bulbs (6000K Ice White) CEUK 12-Month Warranty (keep original packaging if longer warranty is stated) Support from our UK-based team if you need fitting advice 🔧 Vehicle Compatibility: This product is suitable for any vehicle using an H1 halogen headlight bulb – whether for dipped beam, high beam, or fog lights. Please Note: Always confirm bulb type before purchase. Some high-spec models (e.g. Ford ST, VW GTI) may use a different fitment than base trims. ⚠️ CANBUS Warning: Some vehicles may display a dashboard error message after installing LEDs due to reduced power draw. This is a harmless effect. See our FAQs for easy solutions like resistors or error cancellers, if required. 🧠 Did You Know? OEM halogen H1 bulbs typically produce 1,200–1,500 lumens per bulb. CEUK’s Enhanced Edition H1 LEDs provide over 6x the brightness with significantly less heat. White 6000K lighting not only looks better, but it improves contrast on road markings, kerbs, and signs — helping reduce driver fatigue during night driving. 🎯 Perfect For: Daily Drivers who want better visibility Car Enthusiasts looking to modernise the look of their headlights DIY Modders wanting a true plug & play upgrade Show Builds that need a clean, bright, premium light output  

Read more less

Enhanced Edition H8/11 LED Fog Light Bulb V3 – 6000K Ice White + Colour Tint Kit Upgrade your visibility and style with the CEUK Enhanced Edition H8/11 LED Bulb V3, the ultimate plug-and-play LED upgrade for your fog lights or dipped beam. Designed for OEM-fit compatibility, this next-generation bulb delivers an ultra-bright 6000K Ice White beam with no wiring or modification needed – and includes tint options for complete visual customisation. 🔥 Why Choose the V3 H8/11 Bulb? 💡 6,000 Lumens per bulb (12,000Lm pair) 🧊 6000K Ice White output as standard 🟡 Tint Kit Included: 2x 3000K Yellow Film Wraps 2x 8000K Cool White/Blue Film Wraps 🔧 Fits all H8 and H11 bulb sockets 🧩 No adapters, clips or wiring required 🌟 Compatible with reflector & projector housings 🧠 Designed to reduce eye strain while improving night-time visibility ⚠️ Fitment Note: Ensure at least 1 inch of space behind the bulb in your housing for safe installation. ✅ What’s in the Box: 2x CEUK Enhanced H8 / H11 LED Bulbs (6000K Ice White Default) 2x 3000K Yellow Adhesive Films (Fog Style) 2x 8000K Blue-White Adhesive Films (Colder Tint) Installation Tips 12-Month CEUK Warranty (keep packaging if a longer warranty is stated) ⚙️ Technical Specifications: Spec Detail Voltage 12V Wattage 50W per bulb Lumen Output 6,000Lm per bulb Colour Temp 6000K (default), optional 3000K or 8000K via tint film Fitment H8 / H11 🚗 Vehicle Compatibility: Fits any vehicle using H8 or H11 bulbs in: ✅ Fog Lights ✅ Low Beam / Dipped Beam (space permitting) ⚠️ Note: Check for trim-specific variations (e.g., Ford ST, VW GTI) before ordering. Some modern vehicles may display a dashboard bulb warning due to low power draw. This is harmless and may require a resistor or decoder depending on your vehicle. See our FAQs for more help. 🧠 Did You Know? OEM halogen bulbs output roughly 1,200–1,500 lumens CEUK Enhanced LED Bulbs deliver over 4x the brightness Yellow tint boosts visibility in fog, rain or snow 8000K offers a distinct premium aesthetic for show or daily use 🎯 Perfect For: Drivers seeking maximum light output Customisation lovers who want style + function Fog light or dipped beam LED upgrades Cars with tight headlight units (space-saving design)

Read more less