Performance - Toyota Supra MK5 (A90 / J29) 2019-Present

This MST Performance Intake System has been designed for 2023+ Toyota Corolla GR 1.6 This Cold Air Intake System is the perfect addition to your engine bay. The system gives your vehicle added horsepower, torque, a snappier throttle response and of course an aggressive induction sound. Features include: * Maximizes airflow to provide gains about 6-8hp & 0.6kgm * Larger-sized air box along with a 3.5" large diameter pleated air filter * Better throttle response and more aggressive induction sounds * High-flow air filter, easy to maintain * Direct fit kit

Read more less

MST Heat Shield Clear Top Cover - This only for customers who already own MST Intake Kit.   Compatible kits are below: MST-TY-SUP01 MST-TY-SUP01L Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2019-2025 BMW Z4 (G29) 3.0 (B58) 2020-2025 TOYOTA SUPRA (A90)  3.0 (B58) GR

Read more less

This is a performance enhancing induction kit for the MK5 Supra and BMW Z4 2.0T B48 Features Improved throttle response Black powdercoated heat shield and inlet pipe Dyno results: max gains 12-14bhp (this may vary dependant on vehicle) Easy to maintain dry pleated filter Cold air straight to the turbo charger What Does It Do? This induction kit deliver increaseds air flow and induction noise over the standard restrictive air box. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black powdercoated heat shield Red pleated filter Silicone joiner Black powdercoated inlet pipe Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2018-2021 BMW Z4 (G29) 2.0 (B48) 2019-2021 Toyota Supra (A90) 2.0 (B48) 2019-2021 Toyota Supra (A90) 2.0T (B48)

Read more less

MST Performance have developed this turbo inlet kit for the BMW G series B58 engine. Using our silicone pipe to replace the OEM plastic pipe design that restricts airflow & muffler. Creating more power & better turbo response. The smooth interior of our silicone pipe maximizes the airflow. Features: No more OEM pipe design that restricts the airflow. Enhanced turbo response & engine power output. High heat resistant silicone pipe, more durable than the OEM pipe. Remove the OEM muffler design. Direct installation while still keeping the OEM airbox. No need for tuning. Vehicle Fitment: BMW 240i (G4x) – 3.0T B58 – 2019+ BMW 340i inc. xDrive (G2x) – 3.0T B58 – 2019+ BMW 440i inc. xDrive (G2x) – 3.0T B58 – 2019+ BMW Z4 (G2x) – 3.0T B58 – 2019+ Toyota Supra A90/A91 – 3.0T B58 – 2019+

Read more less

MST Turbo Inlet Pipe for BMW B58 G series/ Toyota Supra A90 A91/BMW Z4 (BW-B5805H) Only Compatible with MST Intake Kits  Features Improved throttle response Cold air straight to the turbo charger Improved turbo response Enlarged diameter on the silicone hose What Does It Do? This turbo inlet delivers increased air flow over the standard turbo inlets. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black silicone hoses Full fitting kit with easy step by step instructions Fits BMW M340i B58 G20 G21 G22 G23 3.0T M240i G42 BMW Z4 Toyota Supra A90 A91 

Read more less

P3 V3 OBD2 Gauge Basic Features Plug and Play Install - plugs directly into your OBD2 port (Want to keep your OBD2 port open? The P3 hard-wire harness kit also available) OEM Integration - installs in your vent for a sleek install while retaining air flow Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analogue boost sensor Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units) Boost (via OBD2 port using OEM sensors or P3 analogue boost sensor) Coolant temperature Engine oil temperature Air/Fuel ratio (AFR or Lambda) Vehicle speed (can be calibrated in 1% increments from -9% to +20%) Intake air temperature Throttle angle Ignition timing Engine RPM Exhaust gas temperature Battery voltage Programmable shift light analogue input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor analogue input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor Acceleration timers (0-60mph/0-100mph/60-130mph) Braking timers (60-0mph/100-0mph) Optional Add-Ons P3 analogue Boost sensor - plugs directly into gauge harness, no wiring required) Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port

Read more less

This is a performance enhancing induction kit for the B48 Toyota Supra and BMW Z4. For a full list of compatibility please see chart below. Features Improved throttle response Dyno results: max gains 12-14bhp (this may vary dependant on vehicle) Easy to maintain dry pleated filter Cold air straight to the turbo charger What Does It Do? This induction kit delivers increased air flow and induction noise over the standard restrictive air box. Whether this kit is being installed to a standard vehicle or to an already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the highest quality components in all of their kits, see below for what this kit will include... Roto-Molded Crosslinked Polyethylene Heat Shield Black silicone intake pipe Red pleated filter Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2018-2021 BMW Z4 (G29) 2.0 (B48) 2019-2021 Toyota Supra (A90) 2.0 (B48)

Read more less

This performance intake kit is designed to fit 3.0 B58 Toyota Supra and BMW Z4 models from 2019 onwards. It is suitable for both right and left-hand-drive vehicles. Features An open air induction kit will give your car that ever needed increase in induction.  Will give the vehicle an increase in BHP and more importantly torque. Optimise airflow and filtration by utilising the twin-tangential velocity stack that brings smooth air flow and the nanofibre filtration media. Easy to clean using our filter maintance kit - CK-003 What Does It Do? This induction kit will increase the airflow into the turbo while increasing engine noise over the restrictive factory air intake system. This kit includes everything required for the fitting of the induction kit. What Will I Get? Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include: Black heat shield Ramair foam air filter Black silicone hose with take-off Intake Pipe with MAF housing Turbo Adapter Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2019-2024 Toyota Supra (A90) 3.0T B58 GR 2019-2021 BMW Z4 (G29) 3.0 (B58) 2025 Toyota Supra (A90) 3.0T B58 GR 2022-2025 BMW Z4 (G29) 3.0 (B58)

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This GR Supra performance exhaust is made in 3" (76.2mm) pipework and fits from the Gasoline Particulate Filter section backwards (GPF-back), replacing the centre and rear sections. This exhaust offers improvement in terms of exhaust tone, bass and sound level whilst keeping the stock catalyst and GPF in place. This exhaust system has been designed to be easily upgradable to a full turbo-back exhaust in the future by purchasing additional sections. The twin valved system offers a jekyll and hyde personality, with the exhaust valves closed the exhaust is refined - allowing the driver to eat up miles in total tranquillity. Then when you hit the country lanes and unleash the B58, the exhaust valves open, and exhaust gases are split between the rear silencer and rear silencer by-pass, delivering the ultimate audible upgrade whilst keeping the factory gasoline particulate filter and catalytic converter in place.  Download Toyota GR Supra PDF Brochure >> GPF Back Test Results: Sound - Engine at Idle: 65dB (+7dB) - Static 4,000rpm test: 91.7dB (+6.7dB) Please Note: The resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. This 'Valved' exhausts retain the use of exhaust valves. When switching drive modes (e.g. Eco to Race mode) your exhaust tone will continue to swap from quieter to louder tones as before. The single valve setup offers a more subtle change in tones when compared with the twin valve setup.  All relevant fittings and gaskets are supplied. Press Release The previous generation Toyota Supra is regarded as one of the best sports cars of all time by petrolheads.  Featuring a powerful and durable turbocharged straight-6 engine, the Supra is a tuners dream, with many owners tuning them past 700BHP. However, in 2002 the final A80 Supra rolled off the production line, and despite fans all round the word calling out for a successor, Toyota wouldn't deliver a successor for another 17 years. After making JDM fans wait 17 years for their favourite sports car to return, there is a lot of pressure on Toyota to ensure the fans weren't disappointed. The recipe for the GR Supra has remained the same, a rear-wheel drive coupe with an excellent chassis and a highly tuneable 6-cylinder engine. Upfront there is one of the most capable engines currently in production, BMW's iconic B58 3.0 litre turbocharged straight-6, which produces 340BHP and 500Nm of torque. Enough to fire the JDM legend from a standstill to 62MPH in just 4.3 seconds - a figure which will frighten its rivals from Bavaria and Stuttgart.  The well proven B58 straight-6 makes the Toyota GR Supra a tuners dream, however emissions regulations have resulted in the introduction of a GPF (Gasoline Particulate Filter), which limits the aural potential of the glorious straight-6 powerplant.   For those looking to awaken the sound and unlock the performance of their GR Supra, Cobra Sport has the solution with their newly released performance exhaust range, which is stepping away from the norm by focusing primarily on the tuning market. The Toyota GR Supra performance exhaust configuration options are as follows:  GPF Back – Pipework attaching to the gasoline particulate filter and continuing to the rear of the vehicle. (factory catalytic converter and GPF retained) Cat Back – Pipework deleting the GPF filter and attaching to the catalytic converter and continuing to the rear of the vehicle. (Factory Catalytic Converter retained but deleting the GPF - ECU remap required – Off-road and motorsport use only) Turbo Back –  Pipework attaching to the turbo via a downpipe (Sports Catalyst and De-Cat options both available) and continuing to the rear of the vehicle. (Factory Catalytic Converter and GPF deleted allowing for the smoothest possible flow of exhaust gas and sound upgrade - ECU remap required, off-road and motorsport use only) Downpipes – To standard exhaust fitment (Sports Cat will allow you to pass MOT emissions tests, De-Cat is for off-road and motorsport use only) The Cobra Sport research & development team have developed a full double valved turbo back performance exhaust which features a 4.5 in/114.3mm 200 cell high flow sports catalyst teamed with dual 3"/76.2mm pipework, offering unprecedented flow rates for the biggest upgrade in terms of performance, flow rate and sound levels, opening up the tuning possibilities of the Toyota GR Supra. For those who want to add audible emotion without the need for any engine tuning, Cobra Sport offer their GPF-back performance exhaust range, fitting from the petrol particulate filter and replacing the centre and rear sections, keeping the stock catalyst and GPF in place (MOT compliant). The GPF-back setup is available in two formats, a twin valved setup utilises Cobra Sport's unique rear silencer to allow a subtle increase in sound when cruising and add a deep aggressive tone when you push the loud pedal. The twin valved system offers a jekyll and hyde personality, with the exhaust valves closed the exhaust is refined - allowing the driver to eat up miles in total tranquillity. Then when you hit the country lanes and unleash the B58, the exhaust valves open, and exhaust gases are split between the rear silencer and rear silencer by-pass, delivering the ultimate audible upgrade whilst keeping the factory gasoline particulate filter and catalytic converter in place.  The Cobra Sport development team have also injected the GR Supra with it's signature venomous DNA in the form of the Venom GPF-Back system. This performance exhaust setup offers the biggest audible increase whilst keeping the factory fit emissions devices in place. In Venom GPF-back configuration the GR Supra recorded a +16dB increase in the 4,000RPM static sound test.   Media Static Sound Example - Single Valved GPF Back with Rear Boxes

Read more less

Requires mandatory ECU reflash when fitted. Fitment to PPF models is for motorsport and off road use only. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This GR Supra performance exhaust is made in 3"/76.2mm pipework and fits from the turbo backwards (turbo-back system), these parts replace the front pipe, PPF, centre and rear sections. This turbo back exhaust features a 4.5 in/114.3mm 200 cell high flow downpipe teamed with dual 3"/76.2mm pipework, offering unprecedented flow rates for the biggest upgrade in terms of performance, flow rate and sound levels, opening up the tuning possibilities of the Toyota GR Supra. The twin valved system offers a jekyll and hyde personality, with the exhaust valves closed the exhaust is refined - allowing the driver to eat up miles in total tranquillity. Then when you hit the country lanes and unleash the B58, the exhaust valves open, and exhaust gases are split between the rear silencer and rear silencer by-pass, delivering the ultimate audible upgrade. Download Toyota GR Supra PDF Brochure >> Please Note: The resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. The 'Valved' exhaust retains the use of exhaust valves. When switching drive modes your exhaust tone will continue to swap from quieter to louder tones as before. The single valve setup offers a more subtle change in tones when compared with the twin valve setup.  IMPORTANT: Engine tuning at time of fitment required to cancel the EML light. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sport catalyst version replaces a factory emissions device and is not EC homologated. This may not meet current emission laws for road use in your territory.  Fitment is for motorsport and off road use only as it removes the PPF filter.  All relevant fittings and gaskets are supplied. Press Release The previous generation Toyota Supra is regarded as one of the best sports cars of all time by petrolheads.  Featuring a powerful and durable turbocharged straight-6 engine, the Supra is a tuners dream, with many owners tuning them past 700BHP. However, in 2002 the final A80 Supra rolled off the production line, and despite fans all round the word calling out for a successor, Toyota wouldn't deliver a successor for another 17 years. After making JDM fans wait 17 years for their favourite sports car to return, there is a lot of pressure on Toyota to ensure the fans weren't disappointed. The recipe for the GR Supra has remained the same, a rear-wheel drive coupe with an excellent chassis and a highly tuneable 6-cylinder engine. Upfront there is one of the most capable engines currently in production, BMW's iconic B58 3.0 litre turbocharged straight-6, which produces 340BHP and 500Nm of torque. Enough to fire the JDM legend from a standstill to 62MPH in just 4.3 seconds - a figure which will frighten its rivals from Bavaria and Stuttgart.  The well proven B58 straight-6 makes the Toyota GR Supra a tuners dream, however emissions regulations have resulted in the introduction of a GPF (Gasoline Particulate Filter), which limits the aural potential of the glorious straight-6 powerplant.   For those looking to awaken the sound and unlock the performance of their GR Supra, Cobra Sport has the solution with their newly released performance exhaust range, which is stepping away from the norm by focusing primarily on the tuning market. The Toyota GR Supra performance exhaust configuration options are as follows:  GPF Back – Pipework attaching to the gasoline particulate filter and continuing to the rear of the vehicle. (factory catalytic converter and GPF retained) Cat Back – Pipework deleting the GPF filter and attaching to the catalytic converter and continuing to the rear of the vehicle. (Factory Catalytic Converter retained but deleting the GPF - ECU remap required – Off-road and motorsport use only) Turbo Back –  Pipework attaching to the turbo via a downpipe (Sports Catalyst and De-Cat options both available) and continuing to the rear of the vehicle. (Factory Catalytic Converter and GPF deleted allowing for the smoothest possible flow of exhaust gas and sound upgrade - ECU remap required, off-road and motorsport use only) Downpipes – To standard exhaust fitment (Sports Cat will allow you to pass MOT emissions tests, De-Cat is for off-road and motorsport use only) The Cobra Sport research & development team have developed a full double valved turbo back performance exhaust which features a 4.5 in/114.3mm 200 cell high flow sports catalyst teamed with dual 3"/76.2mm pipework, offering unprecedented flow rates for the biggest upgrade in terms of performance, flow rate and sound levels, opening up the tuning possibilities of the Toyota GR Supra. For those who want to add audible emotion without the need for any engine tuning, Cobra Sport offer their GPF-back performance exhaust range, fitting from the petrol particulate filter and replacing the centre and rear sections, keeping the stock catalyst and GPF in place (MOT compliant). The GPF-back setup is available in two formats, a double valved setup utilises Cobra Sport's unique rear silencer to allow a subtle increase in sound when cruising and add a deep aggressive tone when you push the loud pedal. The twin valved system offers a jekyll and hyde personality, with the exhaust valves closed the exhaust is refined - allowing the driver to eat up miles in total tranquillity. Then when you hit the country lanes and unleash the B58, the exhaust valves open, and exhaust gases are split between the rear silencer and rear silencer by-pass, delivering the ultimate audible upgrade whilst keeping the factory gasoline particulate filter and catalytic converter in place.  The Cobra Sport development team have also injected the GR Supra with it's signature venomous DNA in the form of the Venom GPF-Back system. This performance exhaust setup offers the biggest audible increase whilst keeping the factory fit emissions devices in place. In Venom GPF-back configuration the GR Supra recorded a +16dB increase in the 4,000RPM static sound test.   Media Static Sound Example - Resonated Double Valved Turbo Back Exhaust with High Flow Sports Catalyst Static Sound Example - Resonated Single Valved Turbo Back Exhaust with De-Cat

Read more less

Note: Fitment will require basic engine tuning at time of fitment to cancel the EML light. Fits to PPF-equipped models only. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This GR Supra performance exhaust is made in 4.5"/114.3mm to 3"/76.2mm pipework and fits from the turbo to the PPF section. Download Toyota GR Supra PDF Brochure >> The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sports catalyst version replaces factory emissions devices and is not EC homologated. This may not meet current emission laws for road use in your territory.  Fitment will require basic engine tuning at time of fitment to cancel the EML light. Press Release The previous generation Toyota Supra is regarded as one of the best sports cars of all time by petrolheads.  Featuring a powerful and durable turbocharged straight-6 engine, the Supra is a tuners dream, with many owners tuning them past 700BHP. However, in 2002 the final A80 Supra rolled off the production line, and despite fans all round the word calling out for a successor, Toyota wouldn't deliver a successor for another 17 years. After making JDM fans wait 17 years for their favourite sports car to return, there is a lot of pressure on Toyota to ensure the fans weren't disappointed. The recipe for the GR Supra has remained the same, a rear-wheel drive coupe with an excellent chassis and a highly tuneable 6-cylinder engine. Upfront there is one of the most capable engines currently in production, BMW's iconic B58 3.0 litre turbocharged straight-6, which produces 340BHP and 500Nm of torque. Enough to fire the JDM legend from a standstill to 62MPH in just 4.3 seconds - a figure which will frighten its rivals from Bavaria and Stuttgart.  The well proven B58 straight-6 makes the Toyota GR Supra a tuners dream, however emissions regulations have resulted in the introduction of a GPF (Gasoline Particulate Filter), which limits the aural potential of the glorious straight-6 powerplant.   For those looking to awaken the sound and unlock the performance of their GR Supra, Cobra Sport has the solution with their newly released performance exhaust range, which is stepping away from the norm by focusing primarily on the tuning market. The Toyota GR Supra performance exhaust configuration options are as follows:  GPF Back – Pipework attaching to the gasoline particulate filter and continuing to the rear of the vehicle. (factory catalytic converter and GPF retained) Cat Back – Pipework deleting the GPF filter and attaching to the catalytic converter and continuing to the rear of the vehicle. (Factory Catalytic Converter retained but deleting the GPF - ECU remap required – Off-road and motorsport use only) Turbo Back –  Pipework attaching to the turbo via a downpipe (Sports Catalyst and De-Cat options both available) and continuing to the rear of the vehicle. (Factory Catalytic Converter and GPF deleted allowing for the smoothest possible flow of exhaust gas and sound upgrade - ECU remap required, off-road and motorsport use only) Downpipes – To standard exhaust fitment (off-road and motorsport use only) The Cobra Sport research & development team have developed a full double valved turbo back performance exhaust which features a 4.5 in/114.3mm 200 cell high flow sports catalyst teamed with dual 3"/76.2mm pipework, offering unprecedented flow rates for the biggest upgrade in terms of performance, flow rate and sound levels, opening up the tuning possibilities of the Toyota GR Supra. For those who want to add audible emotion without the need for any engine tuning, Cobra Sport offer their GPF-back performance exhaust range, fitting from the petrol particulate filter and replacing the centre and rear sections, keeping the stock catalyst and GPF in place (MOT compliant). The GPF-back setup is available in two formats, a double valved setup utilises Cobra Sport's unique rear silencer to allow a subtle increase in sound when cruising and add a deep aggressive tone when you push the loud pedal. The Cobra Sport development team have also injected the GR Supra with it's signature venomous DNA in the form of the Venom GPF-Back system. This performance exhaust setup offers the biggest audible increase whilst keeping the factory fit emissions devices in place. In Venom GPF-back configuration the GR Supra recorded a +16dB increase in the 4,000RPM static sound test. Media

Read more less

Please note: Requires mandatory ECU reflash when fitted. Fits to PPF-equipped models only. Fitment to PPF models is for motorsport and off road use only. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This GR Supra performance exhaust is made in 3in/76.2mm pipework and fits from the front catalyst section backwards (Cat-back) replacing the PPF, centre and rear sections. Download Toyota GR Supra PDF Brochure >> IMPORTANT: Engine tuning at time of fitment required to cancel the EML light. Please Note: The resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. The twin valved system offers a jekyll and hyde personality, with the exhaust valves closed the exhaust is refined - allowing the driver to eat up miles in total tranquillity. Then when you hit the country lanes and unleash the B58, the exhaust valves open, and exhaust gases are split between the rear silencer and rear silencer by-pass, delivering the ultimate audible upgrade whilst keeping the factory catalytic converter in place. The single valve setup offers a more subtle change in tones when compared with the twin valve setup. All relevant fittings and gaskets are supplied. Press Release The previous generation Toyota Supra is regarded as one of the best sports cars of all time by petrolheads.  Featuring a powerful and durable turbocharged straight-6 engine, the Supra is a tuners dream, with many owners tuning them past 700BHP. However, in 2002 the final A80 Supra rolled off the production line, and despite fans all round the word calling out for a successor, Toyota wouldn't deliver a successor for another 17 years. After making JDM fans wait 17 years for their favourite sports car to return, there is a lot of pressure on Toyota to ensure the fans weren't disappointed. The recipe for the GR Supra has remained the same, a rear-wheel drive coupe with an excellent chassis and a highly tuneable 6-cylinder engine. Upfront there is one of the most capable engines currently in production, BMW's iconic B58 3.0 litre turbocharged straight-6, which produces 340BHP and 500Nm of torque. Enough to fire the JDM legend from a standstill to 62MPH in just 4.3 seconds - a figure which will frighten its rivals from Bavaria and Stuttgart.  The well proven B58 straight-6 makes the Toyota GR Supra a tuners dream, however emissions regulations have resulted in the introduction of a GPF (Gasoline Particulate Filter), which limits the aural potential of the glorious straight-6 powerplant.   For those looking to awaken the sound and unlock the performance of their GR Supra, Cobra Sport has the solution with their newly released performance exhaust range, which is stepping away from the norm by focusing primarily on the tuning market. The Toyota GR Supra performance exhaust configuration options are as follows:  GPF Back – Pipework attaching to the gasoline particulate filter and continuing to the rear of the vehicle. (factory catalytic converter and GPF retained) Cat Back – Pipework deleting the GPF filter and attaching to the catalytic converter and continuing to the rear of the vehicle. (Factory Catalytic Converter retained but deleting the GPF - ECU remap required – Off-road and motorsport use only) Turbo Back –  Pipework attaching to the turbo via a downpipe (Sports Catalyst and De-Cat options both available) and continuing to the rear of the vehicle. (Factory Catalytic Converter and GPF deleted allowing for the smoothest possible flow of exhaust gas and sound upgrade - ECU remap required, off-road and motorsport use only) Downpipes – To standard exhaust fitment (Sports Cat will allow you to pass MOT emissions tests, De-Cat is for off-road and motorsport use only) The Cobra Sport research & development team have developed a full double valved turbo back performance exhaust which features a 4.5 in/114.3mm 200 cell high flow sports catalyst teamed with dual 3"/76.2mm pipework, offering unprecedented flow rates for the biggest upgrade in terms of performance, flow rate and sound levels, opening up the tuning possibilities of the Toyota GR Supra. For those who want to add audible emotion without the need for any engine tuning, Cobra Sport offer their GPF-back performance exhaust range, fitting from the petrol particulate filter and replacing the centre and rear sections, keeping the stock catalyst and GPF in place (MOT compliant). The GPF-back setup is available in two formats, a double valved setup utilises Cobra Sport's unique rear silencer to allow a subtle increase in sound when cruising and add a deep aggressive tone when you push the loud pedal. The twin valved system offers a jekyll and hyde personality, with the exhaust valves closed the exhaust is refined - allowing the driver to eat up miles in total tranquillity. Then when you hit the country lanes and unleash the B58, the exhaust valves open, and exhaust gases are split between the rear silencer and rear silencer by-pass, delivering the ultimate audible upgrade whilst keeping the factory gasoline particulate filter and catalytic converter in place.  The Cobra Sport development team have also injected the GR Supra with it's signature venomous DNA in the form of the Venom GPF-Back system. This performance exhaust setup offers the biggest audible increase whilst keeping the factory fit emissions devices in place. In Venom GPF-back configuration the GR Supra recorded a +16dB increase in the 4,000RPM static sound test.

Read more less

Note - This product is designed without a silencer and will be loud. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This GR Supra performance exhaust is made in 3"/76.2mm pipework and fits from the Gasoline Particulate Filter section backwards (GPF-back) replacing the centre and rear sections. This exhaust offers a significant improvement in terms of exhaust tone, bass and sound level whilst keeping the stock catalyst and GPF in place. Venom GPF Back Test Results: Sound - Engine at Idle: 66dB (+8dB) - Static 4,000rpm test: 101dB (+16dB) Download Toyota GR Supra PDF Brochure >> All relevant fittings and gaskets are supplied. Please Note: This 'Non-Valved' exhaust removes the use of exhaust valves. Using a Non-Valved exhaust will not harm the running of your vehicle, you will simply not have exhaust sound options, however, the Cobra Sport exhaust has been designed with this in mind. Press Release The previous generation Toyota Supra is regarded as one of the best sports cars of all time by petrolheads.  Featuring a powerful and durable turbocharged straight-6 engine, the Supra is a tuners dream, with many owners tuning them past 700BHP. However, in 2002 the final A80 Supra rolled off the production line, and despite fans all round the word calling out for a successor, Toyota wouldn't deliver a successor for another 17 years. After making JDM fans wait 17 years for their favourite sports car to return, there is a lot of pressure on Toyota to ensure the fans weren't disappointed. The recipe for the GR Supra has remained the same, a rear-wheel drive coupe with an excellent chassis and a highly tuneable 6-cylinder engine. Upfront there is one of the most capable engines currently in production, BMW's iconic B58 3.0 litre turbocharged straight-6, which produces 340BHP and 500Nm of torque. Enough to fire the JDM legend from a standstill to 62MPH in just 4.3 seconds - a figure which will frighten its rivals from Bavaria and Stuttgart.  The well proven B58 straight-6 makes the Toyota GR Supra a tuners dream, however emissions regulations have resulted in the introduction of a GPF (Gasoline Particulate Filter), which limits the aural potential of the glorious straight-6 powerplant.   For those looking to awaken the sound and unlock the performance of their GR Supra, Cobra Sport has the solution with their newly released performance exhaust range, which is stepping away from the norm by focusing primarily on the tuning market. The Toyota GR Supra performance exhaust configuration options are as follows:  GPF Back – Pipework attaching to the gasoline particulate filter and continuing to the rear of the vehicle. (factory catalytic converter and GPF retained) Cat Back – Pipework deleting the GPF filter and attaching to the catalytic converter and continuing to the rear of the vehicle. (Factory Catalytic Converter retained but deleting the GPF - ECU remap required – Off-road and motorsport use only) Turbo Back –  Pipework attaching to the turbo via a downpipe (Sports Catalyst and De-Cat options both available) and continuing to the rear of the vehicle. (Factory Catalytic Converter and GPF deleted allowing for the smoothest possible flow of exhaust gas and sound upgrade - ECU remap required, off-road and motorsport use only) Downpipes – To standard exhaust fitment (Sports Cat will allow you to pass MOT emissions tests, De-Cat is for off-road and motorsport use only) The Cobra Sport research & development team have developed a full double valved turbo back performance exhaust which features a 4.5 in/114.3mm 200 cell high flow sports catalyst teamed with dual 3"/76.2mm pipework, offering unprecedented flow rates for the biggest upgrade in terms of performance, flow rate and sound levels, opening up the tuning possibilities of the Toyota GR Supra. For those who want to add audible emotion without the need for any engine tuning, Cobra Sport offer their GPF-back performance exhaust range, fitting from the petrol particulate filter and replacing the centre and rear sections, keeping the stock catalyst and GPF in place (MOT compliant). The GPF-back setup is available in two formats, a double valved setup utilises Cobra Sport's unique rear silencer to allow a subtle increase in sound when cruising and add a deep aggressive tone when you push the loud pedal. The Cobra Sport development team have also injected the GR Supra with it's signature venomous DNA in the form of the Venom GPF-Back system. This performance exhaust setup offers the biggest audible increase whilst keeping the factory fit emissions devices in place. In Venom GPF-back configuration the GR Supra recorded a +16dB increase in the 4,000RPM static sound test. Media Static Sound Example - Venom GPF Back Driving Sound Example - Venom GPF Back

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

Introducing the Enhanced Edition LED H7 Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in ANY H7 Fitments and replaces the OEM lamp unit for an ultra bright replacement. This bulb can be used as a dipped & high beam upgrade as well as a foglight. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! No longer any need for clips & caps! The bulb is designed to fit in any H7 fixing without any adjustments or additional items, and utilising its 4 point technology, this can be orientated in either 2 or 4 location points to ensure the best output and zero polarity issues! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H7 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H7 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped & high beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H8 or H11 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H8/11 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

For hydraulic brake and clutch systems. Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3) Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual. Min. dry boiling point 260°C. Min. wet boiling point 165°C Notice Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs. Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water.  DOT 4 Technical Info Contents 500 ml Colour Pale Amber Chemical basis Butoxyethanol Shelf life from production 36 Month Min. wet boiling point 165 °C Min. dry boiling point 260 °C Density 1.052 g/ml Density conditions at 20°C pH value 7-11

Read more less

PFC13-14 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 13-14mm --- PFC15-16 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 15-16mm --- PFC17-18 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 17-18mm --- PFC19-20 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 19-20mm --- PFC21-22 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 21-22mm --- PFC23-24 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 23-24mm --- PFC25-27 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 25-27mm --- PFC28-30 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 28-30mm --- PFC31-33 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 31-33mm

Read more less

Here we introduce to you our #Enhanced Edition H1 LED Upgrade. This product can NOT be used as a cornering light! Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. Unlike other suppliers, CEUK has developed an LED bulb which does not require the splicing of wires and difficult intricate clips to hold the lamp in place. This unit fits in its entirety as an OEM H1 Halogen bulb would. The LED's come as standard 6000K ice white,  Its worth noting that due to the design of headlamps, different lamps and light units may give different results to those found in our pictures. Good to know. High Lumen Output Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 20,000 (10,000 Per Bulb) What's in the box 2x H1 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Performance silicone hose kit for the Supra JZA70 1JZ-GTE. Hose kit contains two coolant/radiator hoses.Made by Pro Hoses.Please note: Custom colours are made to order, please expect a 5-10 day delay on custom colours.Peak show times may be a longer 7-10 day delay.Available in a variety of colours.Part no: PH/COLTOY3

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb V3 This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Will fit in any vehicle which takes a H8 or H11 fitting provided you have about 1 inch of space behind the bulb! Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H8/11 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.   

Read more less

Description Here we introduce to you our #Enhanced Edition H7 LED V3 Upgrade. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Its worth noting that due to the design of the bulb, The driver / Heat fade is built into the back of the bulb and may not fit into all headlamp types. If you have any concerns please contact us at support@ceuk.org Please note - Some vehicles may require an LED clip of some sort to fit this item, message us direct if you want to clarify if your vehicle requires these.  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H7 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints LED clip not included - If required Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Part of our IllumiNite range - an ultra bright white halogen replacement for your fog and cornering bulbs. 35W - 6500K Ice White Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering.

Read more less