Triple R Composites (TRC)

Discover the latest addition to the triplercomposites lineup, the Volkswagen ID3 - Low Line Kit. New in and exclusively available, this bundle allows you to save money while upgrading the look of your vehicle. Designed to be stylish and sophisticated, this kit adds a touch of luxury and modern elegance to your ride. Enhance your driving experience and make a statement on the road with this must-have accessory. Make the smart choice and elevate your Volkswagen ID3 today. This kit consists of the front splitter, side skirts and rear spats along with all fixings. Finished in a gloss black gel coat ready to fit.

Read more less

Transform the look of your Hyundai i30N with our stylish and aggressively designed front splitter! Enhance the appearance of your car and make a bold statement on the road. Upgrade your ride today! This product is manufactured utilising time-proven composite technology, supplied as pictured in a gloss black gel coat along with a full stainless steel fitting kit.

Read more less

Elevate your car's style with the Hyundai i30N Side Skirt Splitters. The sleek design blends seamlessly with the rest of the kit, adding an exaggerated touch of style. Transform your vehicle into a head-turning powerhouse and experience the thrill of driving in ultimate style. Don't settle for ordinary, upgrade to the extraordinary! Manufactured in GRP finished in a gloss black and supplied with all fixings required.

Read more less

Transform your Audi R8 Gen 1 with our pre facelift rear spats. These stylish additions will not only enhance the appearance of your car, but also complete your kit and elevate your rear bumper. Stand out from the crowd and make a statement with our high-quality finish. Upgrade your ride today! The rear spats come supplied in a gloss black gel coat manufactured from robust GRP material which is time proven to out last the thermoset abs alternatives. These are supplied with a comprehensive stainless steel fitting kit to make installation as simple as possible.

Read more less

Upgrade your Audi R8 Gen 1 with our full low line kit, featuring a front splitter, side skirts, and rear spats. Transform the look of your car and save money with our bundle discount! Revamp your ride and turn heads on the road. Save 10% by purchasing the low line kit as a bundle These are supplied as pictured in a gloss black gel coat ready to fit and with a full stainless steel fitting kit.

Read more less

Transform the look of your Mercedes A45 AMG W176 with our aggressive and stylish Front Splitter! Upgrade your car's appearance and make a bold statement with this eye-catching addition. Get ready to turn heads and stand out on the road. This product is manufactured utilising time-proven composite technology, supplied as pictured in a gloss black gel coat along with a full stainless steel fitting kit.

Read more less

Elevate your Mercedes A45 AMG with these sleek side skirt splitters that perfectly match the front splitter. The inbuilt aero fin not only adds a stylish touch but also improves the car's aerodynamics for a smoother and more efficient ride. Take your driving experience to the next level with these impressive upgrades! Manufactured from GRP, finished in a gloss black as pictured, and supplied with all fixings required.

Read more less

Add the finishing touch to your Mercedes A45 AMG with our sleek and stylish rear spats. Enhance the aerodynamics of your car while giving it a more sporty and aggressive look. Elevate your driving experience today. Manufactured from fibreglass and supplied as pictured in a gloss black gel coat along with a full stainless steel fixing kit.

Read more less

Transform your ride with the full kit for the Mercedes A45 AMG. With its aggressive and unique design, this kit will completely elevate the look of your car, making it stand out from the rest. Upgrade your driving experience with this must-have addition to your Mercedes. Save money by buying as a bundle, all parts are finished in a gloss black gel coat and come supplied with full stainless steel fixing kits.

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper   Our Mondeo ST front splitter, Specifically styled design that follows the curves of the front bumper.   This product is manufactured utilising time proven composite technology. They are supplied as pictured in a gloss black gell coat ready to fit.   The splitter is supplied with a full stainless steel fitting kit.

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper.   Our Mustang Ecoboost front splitter, Specifically styled design that follows the curves and angles of the front bumper giving the front end and a more agressive look.    This product is manufactured utilising time proven composite technology.   They are supplied as pictured in a gloss black gell coat ready to fit. The splitter is supplied with a full stainless steel fitting kit.

Read more less

This listing is for the Fins ONLYPlease select Front splitter Fins Skirt Fins or Both Sets  (save when buying the set)

Read more less

Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit.   Sold as a Pair.

Read more less

Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit.  It comes with a full stainless steel fitting kit and is a simple direct fit.Please note the skirt splitter fins as seen in the pictures are sold as an optional extra and will require painting.Sold as a Pair.

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper.   Our FL Mustang front splitter, Specifically styled design that follows the curves and angles of the front bumper. Please note the splitter fins as seen in the pictures are sold as an optional extra and will require spraying.Make this kit stand out even more with our tie bars sold on the merchandise page.   This product is manufactured utilising time proven composite technology.   They are supplied as pictured in a gloss black gell coat ready to fit. The splitter is supplied with a full stainless steel fitting kit.

Read more less

The products is manufactured from fibreglass in two halves and joined together therefore this product will require painting before install.You can order this product in a sprayed gloss black finish or in an un finished state that will require prepping in painting. This spoiler lip requires bonding on using a polyurethane adhesive (such as tiger seal).

Read more less

Elevate your Mustang's look with our pre-facelift side skirt splitters! These sleek splitters add exaggerated flair to your style, enhancing the already powerful presence of the Mustang. Embody the spirit of the Mustang and stand out from the crowd with these stylish additions. Manufactured from fibreglass and supplied as pictured in a gloss black gel coat along with a full fixing kit.

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper.   Our Mustang front splitter, Specifically styled design that follows the curves and angles of the front bumper.    This product is manufactured utilising time proven composite technology.   They are supplied as pictured in a gloss black gell coat ready to fit. The splitter is supplied with a full stainless steel fitting kit.

Read more less

This product is manufactured utilising time proven composite technology.These side skirt splitters are supplied as pictured in 3 seperate parts each side and a gloss black gell coat, along with a comprehensive stainless steel fixing kit, Branded with our TRC gel badge, ready to fit.  

Read more less

A new style of rear spoiler we are proud to present!   Manufactured in sections and then clicked together. This attaches onto your existing spoiler using a polyeurathane adhesive.  CAD designed from vehicle scan data and manufactured in Nylon 12 on our SLS 3D printer giving the perfect fit. These parts are then media blasted and coloured black giving an oem  apperance.   This item may require manufacturing depending on stock levels, so please allow 1-2weeks for delivery.

Read more less

A new style of rear spoiler we are proud to present!   Manufactured in sections and then clicked together. This attaches onto your existing spoiler using a polyeurathane adhesive.  CAD designed from vehicle scan data and manufactured in Nylon 12 on our SLS 3D printer giving the perfect fit. These parts are then media blasted and coloured black giving an oem  apperance.   This item may require manufacturing depending on stock levels, so please allow 1-2weeks for delivery.

Read more less

These rear diffuser extentions are the perfect way to give your Pumas rear bumper an even more agressive look!   Sold as a pair, manufactured in Nylon 12, media blasted and coloured black, Please see the pictures with the white background for finish and colour as the ones on the vehicle are prototypes.We advise that these are bonded on using a polyurethane adhesive such a as tiger seal for maximum safety and security. If you'd rather your extensions are colour coded, then a body shop will be able to do this for you

Read more less

This is for the rain light centre mount including LED light only.CAD designed from vehicle scan data and manufactured in Nylon 12 on our SLS 3D printer giving the perfect fit. These parts are then media blasted and coloured black giving an oem bumper trim apperance.   The LED centre light can be wired in as desired, the red wire is the positive feed, the black wire the earth and the yellow wire can be toggled against the positive feed to change the strobe pattern of the light through different modes including a solid red light.Provided with a stainless steel fitting kit.   This item may require manufacturing depending on stock levels, so please allow 1-2weeks for delivery.

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper   Our Puma front splitter, Specifically styled design that follows the curves of the front bumper.    This front splitter is supplied as pictured in a gloss black gell coat, along with a comprehensive stainless steel fixing kit, Branded with our TRC gel badge, ready to fit.

Read more less