Triple R Composites (TRC)

Elevate your Fiesta with our ST-Line Rear Spats! These finishing touches add a stylish flair to your vehicle, making it stand out on the road. Make a statement and turn heads with these sleek and modern rear spats. Upgrade your ride today! Finished in a gloss black gel coat and supplied with a full stainless steel fixing kit. 

Read more less

Transform the style of your vehicle with the Fiesta Headlight Brows. These aggressive and stylish add-ons will revamp the appearance of your car and make it stand out on the road. Elevate your driving experience now! Our brows are now manufactured using a new process to insure they are one of the thinnest available on the market today. They measure between 1-1.5mm, thus preventing 'bonnet rub'. Manufactured from fibreglass and supplied in a gloss black gel coat with 3M double sided tape ready to fit.

Read more less

Please Note: This product will require painting for the perfect finish. Transform your Ford Fiesta MK7 Zetec S into a head-turning machine with our stylish and functional spoiler lip. Designed to enhance the look of your car while improving its aerodynamics, this product is a must-have for any passionate driver. Upgrade your ride and make a statement on the road! Manufactured from fibreglass and finished in black gel coat. This spoiler lip requires bonding on using a polyuerthane adhesive (such as tigerseal).

Read more less

A new style of rear spoiler we are proud to present!   Manufactured in sections and then clicked together. This attaches onto your existing spoiler using screws provided, we recommend some polyeurathane adhesive too (not provided).  Then hide the screw holes with the cover caps provided. CAD designed from vehicle scan data and manufactured in Nylon 12 on our SLS 3D printer giving the perfect fit. These parts are then media blasted and coloured black giving an oem  apperance.   This item may require manufacturing depending on stock levels, so please allow 1-2weeks for delivery.

Read more less

The Styling Factory - Fiesta MK7 Spoiler Cap is a gloss black boot spoiler lip giving the rear end a much more aggressive look.This product is supplied in gloss black ready to be fitted.You'll need to use a polyurethane adhesive such a Tiger Seal to fit this product Please note - This item is not a TRC product and is imported.

Read more less

Enhance the sleek look of your Ford Fiesta with these stylish side skirt splitters. Their design follows the car's lines to create an exaggerated, sporty appearance. Turn heads and stand out on the road with these eye-catching additions. These are manufactured using time proven composite technology. Supplied as pictured in a gloss black gel coat, along with a comprehensive stainless steel fixing kit and branded with our TRC gel badge, ready to fit.

Read more less

Current leadtime approx 1-2 weeks Manufactured from fibreglass and supplied as pictured in a gloss black gell.This product may require some trimming / sanding to ensure the perfect fit. Due to the manufacturing process this item may require prepping and painting, it is supplied in a black finish but may have small imperfections in the surface.   It comes with a full stainless steel fitting kit and is a simple direct fit.This diffuser is a direct replacement. Please note - This diffuser does not fit the US spec Fiesta.

Read more less

Our fog light extension are the perfect way to give your ST's front end a little more agression. These are 3D printed in Nylon12 and supplied in a mottled charcoal/black finish as in the close up latter picture. We advise that these are bonded using a polyurethane adhesive such a as tiger seal for maximum safety and security.(NOT SUPPLIED) If you'd rather your extensions are colour coded, then a body shop will be able to do this for you. - THESE DO NOT COME COLOUR CODED OR GLOSS BLACK FROM US!

Read more less

These fins are supplied in a set of 4 as pictured with rain light centre mount including LED light.CAD designed from vehicle scan data and manufactured in Nylon 12 on our SLS 3D printer giving the perfect fit. These parts are then media blasted and coloured black giving an oem bumper trim apperance.   The LED centre light can be wired in as desired, the red wire is the positive feed, the black wire the earth and the yellow wire can be toggled against the positive feed to change the strobe pattern of the light.Provided with a stainless steel fitting kit.   If you are looking for just the diffuser fins please see our other items.   This item may require manufacturing depending on stock levels, so please allow 1-2weeks for delivery.

Read more less

Current leadtime approx 1-2 weeks**New and Improved fitment. Re-designed / developed to offer improved fitment.** Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit.This product is supplied with fixings and is a simple direct fit. To protect our designs this product has been registered with the Intellectual Property Office - Registered design number - 6038647

Read more less

Add the perfect finishing touch to your Ford Fiesta MK7.5 ST180 with our high-quality rear spats. These spats will complete your look and make your car stand out on the road. Elevate your driving experience with these must-have accessories! Supplied as pictured in a gloss black gel coat and comes with a full stainless steel fitting kit.

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper   Our Ford Fiesta ST180 V3 front splitter, the third varient design. The V3 is the most OEM designed front splitter that follows the front bumpers curves. The V3 splitter lends itself to the Ally-Aero Front splitter if you want to gain the race inspired look.   This product is manufactured utilising time proven composite technology.  This splitter is supplied as pictured in a gloss black gell coat, along with a comprehensive stainless steel fixing kit, Branded with our TRC gel badge, ready to fit.

Read more less

Current leadtime approx 1-2 weeks Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper   Due to the Popularity of our Original front splitter for the MK7 ST180 we decided the market required a second varient. "The Modified" front splitter with it's edgy angles and raised centre section was designed to aid in ground clearance for the lowered Fiestas.   This product is manufactured utilising time proven composite technology.  This splitter is supplied as pictured in a gloss black gell coat, along with a comprehensive stainless steel fixing kit, Branded with our TRC gel badge, ready to fit. PLEASE NOTE - This splitter does NOT need or come with tie rods as seen in the picture, this was a customers choice

Read more less

Current leadtime approx 1-2 weeks Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper   Our Fiesta MK7 ST Original front splitter was the first design developed by ourselves and is the lowest sitting of the 3 varients available. The Original splitter is the bigger splitter choice and gives the most aggresive look to the front end. For the race inspired look The Original Splitter offers itself very well to the Ally-Aero Front Splitter.   This product is manufactured utilising time proven composite technology.  This splitter is supplied as pictured in a gloss black gell coat, along with a comprehensive stainless steel fixing kit, Branded with our TRC gel badge, ready to fit.

Read more less

Current lead time 1-2 weeksOur fog light extension are the perfect way to give your Fiestas front end a little more agression.These are 3D printed in a ABS plastic and supplied in a pair as pictured.We advise that these are bonded using a polyurethane adhesive such a as tiger seal for maximum safety and security (not provided)If you'd rather your extensions colour coded then a body shop will be able to do this for you. 

Read more less

Our brows are now manufactured using a new process to insure they are one of the thinnest available on the market today. They measure between 1-1.5mm, thus preventing 'bonnet rub'.   Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit.These brows are supplied with 3M double sided tape for fitment, we also advise using a polyurethane adhesive (such as tigerseal - NOT PROVIDED) to bond them on for maximum security. To protect our designs this product has been registered with the Intellectual Property Office - Registered design number - 6039677

Read more less

Our brows are now manufactured using a new process to insure they are one of the thinnest available on the market today. They measure between 1-1.5mm, thus preventing 'bonnet rub'.   Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit.These brows are supplied with 3M double sided tape for fitment, we also advise using a polyurethane adhesive (such as tigerseal - NOT PROVIDED) to bond them on for maximum security. To protect our designs this product has been registered with the Intellectual Property Office - Registered design number - 6039677

Read more less

Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit.This product is supplied with fixings and is a simple direct fit.

Read more less

These fins are supplied in a set of 4 as pictured with rain light centre mount including LED light.CAD designed from vehicle scan data and manufactured in Nylon 12 on our SLS 3D printer giving the perfect fit. These parts are then media blasted and coloured black giving an oem bumper trim apperance. The LED centre light can be wired in as desired, the red wire is the positive feed, the black wire the earth and the yellow wire can be toggled against the positive feed to change the strobe pattern of the light.Provided with a stainless steel fitting kit. If you are looking for just the diffuser fins please see our other items. This item may require manufacturing depending on stock levels, so please allow 1-2weeks for delivery.

Read more less

Current leadtime approx 1-2 weeksManufactured from fibreglass and supplied as pictured in a gloss black gel.This product may require slight sanding across the top edge to ensure perfect fitment where the diffuser meets the bumper.The diffuser install requires removal of the OEM diffuser and the use of the fixings provided and polyurethane adhesive.

Read more less

These surrounds are supplied as a pair as pictured.\ CAD designed from vehicle scan data and manufactured in Nylon 12 on our SLS 3D printer giving the perfect fit. These parts are then media blasted and coloured black giving an oem bumper trim apperance. This item may require manufacturing depending on stock levels, so please allow 1-2weeks for delivery.

Read more less

TO INSTALL THIS SPLITTER TO A FACELIFT MK8.5 FIESTA ST - THE ORIGINAL FORD PERFORMANCE SPLITTER MUST BE REMOVED! Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper  Due to the popularity of the MK8 fiesta kit we decided to develop a second variant. Taking inspiration from the shape of the grill, lines around the fog lights and wheel arch, using a stepped layer design incorporated with a large chamfered edge giving you this beast of a splitter.  This product is manufactured utilising time proven composite technology. They are supplied as pictured in a gloss black gell coat ready to fit. The splitter is supplied with a full stainless steel fitting kit.

Read more less

TO INSTALL THIS SPLITTER TO A FACELIFT MK8.5 FIESTA ST - THE ORIGINAL FORD PERFORMANCE SPLITTER MUST BE REMOVED! Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper Our MK8 Fiesta front splitter, Specifically styled design that follows the curves and angles of the front bumper. This product is manufactured utilising time proven composite technology.This splitter is supplied as pictured in a gloss black gell coat, along with a comprehensive stainless steel fixing kit, Branded with our TRC gel badge, ready to fit. To protect our designs this product has been registered with the Intellectual Property Office - Registered design number - 6038649

Read more less

The spoiler lip comes in a sprayed gloss back finish ready to fit For fitting this requires bonding on using a polyuerthane adhesive (such as tigerseal). NOT PROVIDED

Read more less