Turbo Inlet

​​​​​​Fitting this part increases the airflow into the turbo by replacing the restrictive plastic OEM turbo inlet pipe. This innovative product fits all MQB platforms as well as both left and right hand drive vehicles and is a direct replacement for OEM part code 5Q0129635L. When fitting this part, you will increase the available airflow and create an impressive sound by creating a larger, smoother transition between the turbo inlet hose and compressor housing inlet. An all-aluminium construction that fits with standard inlet hose or aftermarket systems, featuring a precision mandrel bent CNC formed pipe along with a precision CNC high flow machined flange. Twin o-ring seal design between the turbo coupler and inner surface of the turbo inlet ensures no leaks and no debris can be drawn into the turbo internals. This part also fits with our induction hose, FMMK7INDH Increased airflow. All aluminium construction. CNC machined couplers for a precision fit. No check engine lights Black hardwearing powdercoated finish. Compatible with LHD and RHD Up to 8 BHP and 16 ft/lbs or torque improvement Made in Great Britain.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

All too often OEM components sacrifice performance in an effort to appeal to a wide variety of customers. While an enthusiast typically wants better boost response and more power, all while hearing the turbocharger breathe, a non-enthusiast may give up these characteristics for a quieter ride. Give your 3.0T Audi B9 S4 or S5 the performance it deserves and engage with your car for a more enjoyable driving experience!  In the case of the factory turbo inlet pipe, mounted between the compressor housing and air intake hose, its purpose is to channel air from the inlet hose into the turbocharger inlet, all while reducing engine bay acoustics and sacrificing quality materials in favor of cheap molded plastic material. With the ECS Big Bore Turbo Inlet Pipe, the factory inlet pipe is removed and replaced with our straight-through, high flow cast aluminum inlet. This increases available airflow and turbocharger sound by creating a larger, smoother transition between the turbo inlet hose and compressor housing inlet. To top things off, the flange and bungs are TIG welded, machined billet aluminum to ensure longevity, strength, and dimensional accuracy.   Key features:  Cast aluminum construction 55mm ID at the turbo inlet to maximize air flow (compared to stock 52.2mm) with an 11% increase in area 66mm ID at the intake elbow Retains factory PCV return and wire loom anchors Machined billet flange and bungs for a precision fit and durability  Oil resistant o-ring and stainless hardware included   Performance: Increased bore diameter for increased flow and reduced restriction to the turbo At -20 in Hg test pressure, the stock inlet has a flow rate of 327 CFM vs the ECS inlet which has a flow rate of 382 CFM, a 16.8% increase in flow rate over the stock plastic inlet! This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 S4 Quattro 3.0T Audi B9 S5 Quattro 3.0T Audi B9 S5 Quattro 3.0T Sportback Audi B9 S5 Quattro 3.0T Cabriolet *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

The two most popular modifications to the 2.5T engine are intakes and turbo inlet pipes.  Our 4.0" Silicone Turbo Inlet Adapter allows you to easily mate your ECS Tuning Kohlefaser Luft-Technik Intake system to the popular OE location 4.0" aftermarket turbo inlet pipes on the market.   4-ply silicone construction to prevent collapse Maintains 4" diameter through the entire intake up to the turbo inlet Stepped inside diameter on both ends to ensure the smoothest airflow path possible  Works with aftermarket OE location 4.0" cast/aluminum turbo inlet pipes

Read more less

    In most vehicle applications, the corrugated turbo inlet hose found in the intake system is not designed for performance or modification. It was designed to get the job done, and when adding a performance filter, intake, or tune the stock inlet hose can start to show it's weakness when suction from the turbocharger is increased. The ECS Carbon Fiber Turbo Inlet Pipe was designed in-house and made with high quality hand laid carbon fiber layers providing a strong and secure fit. A smooth interior provides unimpeded airflow, while the carbon fiber exterior adds an appearance upgrade to any engine bay.    PART DESIGN The carbon fiber pipe is constructed from 2x2 twill weave carbon fiber, gloss clear coated for UV and heat protection for continuous operating temperatures of up to 300°. Designed to fit perfectly in place of the factory accordion pipe, our CAD design assures a smooth gradual transition from the intake/airbox to the turbo inlet. The included silicone hose couplers allow clean fitment of any intake setup; The smooth, straight coupler is used with a hard mounted intake pipe configurations to the engine (such as ECS Kohlefaser Luft-Technik mounted to the cylinder head) The accordion rubber coupler is used with OE-type mounting configurations (such as OEM airbox)   PERFORMANCE FEATURES With its smooth interior surface as compared to the OEM accordion tube's ribbed, turbulent interior you can expect a smoother transition from air filter to the turbo inlet. We found that utilizing the carbon inlet tube over silicone provides a stronger, more pronounced induction noise that we all love!    PRODUCT DEVELOPMENT Our ECS Carbon Fiber Turbo Inlet Pipe was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods.   INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish including how to remove your OEM parts in detail and how to select each coupler! See our Installation PDF under the INSTALLATION Tab for more information.   Cross Reference APR Tube, APR Inlet Pipe, carbon fiber inlet tube This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8V S3 Quattro 2.0T Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V Quattro 2.0T Audi MK3 TT (2014+) Quattro 2.0T Audi TTS MK3 (2014+) 2.0T Volkswagen Alltrack All 1.8T Gen3 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 Volkswagen Jetta VII GLI 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

THIS WILL ONLY FIT 4" INTAKES - THIS WILL NOT FIT THE STOCK AIRBOX With Forge leading the way in aftermarket products for the new Hyundai’s, we are proud to present our turbo inlet adaptor for the i30N and Veloster N.  Designed and developed by our highly skilled team on the Solidworks CAD system, the all billet turbo adaptor and high flow silicone inlet pipe is proven to benefit your engines performance. With one of the weak links on the i30N and Veloster's intake system being the restrictive aluminium inlet pipe, we found something more was needed on stage 1 and 2 tuned vehicles. You can not go wrong with Forge hardware on your tuned Hyundai - the results speak for themselves! Mated to our 4” intake and high performance filter (FMINDK28) the gain from the turbo adaptor alone was 10BHP, and, along with a gain in torque, it really transforms your driving experience. The power can be felt from just above 3000 RPM and helps keep a hard consistent pull all the way to the rev limiter.                                                                   Testing was completed on a Maha independent dyno, manufactured by the same people who currently supply BMW M sport and Mercedes Benz for all of their engine calibration and dyno testing. Interestingly there has been lots of divided opinions about our intake requiring a heat shield. Testing took place with the bonnet shut and replicated wind speeds of around 70MPH. Intake temperatures were logged and monitored along with thermal images taken,. During this testing, we did not see the inlet pipe or intake temperatures rise; even after 4 hard pulls, the inlet temperatures stayed at a steady 30°C. The Forge developed turbo inlet adaptor improves your i30N or Veloster's airflow in several ways. Designed in a similar way to a conventional velocity stack, it routes the air more directly into your turbo charger and allows more air to be compressed due to its larger capacity. This can have a positive effect on accelerating your vehicle after long deceleration or between gear changes due to more air being kept within the intake system. The Forge turbo inlet adaptor and high flow inlet pipe has a capacity of more than 150% over the stock item. Not only will you notice the increased performance, but also a slight change in your engine acoustics can be heard. As with all Forge motorsport products we offer a no quibble lifetime guarantee on both the silicone hose and billet adaptor. Will this fit other intakes? The answer is yes, it will fit other manufacturers intakes that have an inlet pipe of 102mm (4”). This will not fit the OEM. This is a simple installation and a modification that releases even more power from the Hyundai`s motor and fitting takes typically around 45 minutes and includes a full set of comprehensive installation instructions. Manufactured from 6082 aerospace grade aluminium Black anodised for ultimate protection and durability Increased capacity of over 150% No engine check lights (EML) Perfect fit with our induction kit Increased air flow The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader Made in the UK Lifetime warranty   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

TURBO INLET HOSE The Revo Machined Turbo Inlet has been designed and engineered to directly replace the stock elbow or the IS38 Revo Machined Turbo Inlet when fitting the Revo IS38ETR Enhanced Turbo Upgrade. The Machined Turbo Inlet has been designed to match the inlet diameter of the Revo IS38ETR turbo to allow for a smoother uninterrupted airflow transition between components.  Can be used with the Revo 2.0 TSI Turbo inlet hose or with the Revo Carbon Series Airbox lid and 100mm Silicone Turbo Inlet Hose.   KEY FEATURES Machined from a single piece of billet Aluminium  Smooth Taper Matched Internal diameter Smooth and increased airflow MACHINED TURBO INLET The Revo machined inlet replaces the restrictive plastic OEM inlet elbow. The machined billet aluminium inlet securely fits the IS38ETR using locking tabs and integrated O-rings. With almost double the cross-sectional area compared to other available products, air can stabilise and distribute before a smooth tapered transition to the turbo. Removing the internal steps between components further ensures uninterrupted airflow and removes any unnecessary turbulence.     Notes: Designed to be used with Revo Inlet hoses Please contact your local Revo Authorised Dealer for additional information and availability. © Revo

Read more less

The higher the boost, more fuel and air is needed. To solve the issue with turbo lag, They've created their own designed Leyo Motorsport turbo inlet pipe. This full aluminium piece increases the reliability and unrestricted airflow direct to your turbocharger. With Leyo Motorsport’s research and developers, they've manufactured what we believe to be one of their best and most important performance products, the Leyo Motorsport turbo inlet pipe. More air being sucked into your turbo will allow horsepower gains not seen from OEM units. They’ve enhanced the size of the inlet pipe to give better throttle response, more linear power feed, and more leeway when tuning your performance vehicle. Leyo Motorsport turbo inlet pipe can have on your pride and joy. Be sure you’re quick to order as demand is currently through the wastegate. Designed by Leyo and tested by the Leyo Motorsport team HQ. Full aluminium tubing. CNC Aluminum Shark Fin flange for secure fitment. CNC Aluminum OEM neck for secure fitment Fits all Air Intake system on the market. Smooth, more linear power gains. Larger than the OEM unit for increased air flow. Simple installation Powder coated & laser etched logo. Race Track Proven

Read more less

For those who prefer a more stealth installation and setup, LEYO Turbo Inlet Hose provides the perfect solution over restrictive OEM plastic piping. With five layers of silicone for durability and reinforced steel wrapped wire core for structural integrity, LEYO Turbo Inlet Hose is a quality alternative for improving induction air flow which is also compatible with factory air box setting. Direct OEM replacement Steel wrapped wire core reinforced Made with five layers of silicone for maximum durability Smoother intake airflow Structure does not collapse under hard acceleration

Read more less

Leyo Motorsport Turbo Muffler Delete - EA888 Gen3More air comes in, more air goes out, and so the flow of energy from your turbo should not be wasted. The OEM turbo muffler is just that, a wasteful restrictive part hiding the true potential of your street or track weapon. Leyo Motorsport has in-house researched and developed its very own one piece design turbo muffler delete eliminating that inefficiency from the OEM product. Leyo Motorsport have created something special that allows greater throttle response, more aggressive power and that beautiful turbo spool in one stylish 6061 billet aluminium product. Finished in hard anodised coating, the Leyo Motorsport turbo muffler delete is the perfect companion to any engine enthusiast seeking more power.See the difference the Leyo Motorsport turbo muffler delete can have to your pride and joy. Designed by Leyo and tested by the Leyo Motorsport team HQ. Unique trumpet design for optimal flow and sound. Machined to 0.01mm tolerance with Japanese laser technology. Includes dual o-ring seals for prolonged turbo life. Notes: Fits vehicles with IHI 'IS12', 'IS20', or 'IS38' TurbochargersNot suitable for vehicles with the 'Garrett' Turbocharger

Read more less

Racingline Hi-Flow Turbo Inlet 1.0TSI – VWR12UPITINLET The new 1.0 TSI Turbo Inlet Elbow transforms the airflow reaching your turbocharger. Let your engine breathe free! It’s compatible with your factory intake box, ideally combined with our Performance Filter. It also fits with other aftermarket intakes, and will be the perfect compliment to our upcoming Cold Air Intake too. It’s ready to support higher power outputs and even turbo upgrades in future. The Intake Upgrade Kit comprises a new high-flow Turbo Silicone Inlet Hose plus Turbo 90 Inlet. Together these upgrades allow greatly increased airflow from your intake into the turbocharger for lightning fast turbo response and a worthwhile power gain. So whether you’re running a standard airbox or you’ve already fitted an intake system, you’ll be wasting potential airflow gains without this Turbo Inlet Elbow! Confirmed Applications All models fitted with the current EA211 1.0 TSI engine; Volkswagen UP GTI 2016+ Volkswagen UP 1.0 TSI 2016+ Volkswagen Polo 1.0 TSI 2017+ AW Volkswagen Polo 1.0 TSI 2014+ AW Volkswagen Golf 7 & 7.5 1.0 TSI 2015-2020 Volkswagen Caddy 1.0 TSI 2015-2020 Volkswagen T-Roc 1.0 TSI 2017+ Volkswagen T-Cross 1.0 TSI 2017+ Volkswagen Touran 1.0 TSI 2018+ Audi A1 1.0 TSI 2015+ Audi Q2 1.0 TSI 2016+ Audi A3 1.0 TSI 2016+ Seat Ibiza 1.0 TSI 2015+ Seat Leon 1.0 TSI 2015+ Seat Arona 1.0 TSI 2017+ Seats Ateca 1.0 TSI 2016+ Seats Toledo 1.0 TSI 2017+ Skoda Fabia 1.0 TSI 2014+ Skoda Octavia 1.0 TSI 2016+ Skoda Karoq 1.0 TSI 2017+ Skoda Rapid 1.0 TSI 2017+   Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR12UPITINLET

Read more less

Turbo Inlet Hose The Revo Turbo Inlet Hose has been designed and engineered to directly replace the stock pipe and elbow found in vehicles with the 1.8 and 2.0 TSI engines with an IHI turbo. The Revo Turbo Inlet Hose offers a high-quality single piece replacement for the OEM parts which allows for smoother uninterrupted air flow, improving the throttle response and performance of your vehicle. Key Features Increased performance Improves air flow efficiency Constant taper for smoother flow Turbo matched inlets Replaces restrictive stock turbo elbow Engineered for both LHD and RHD fitment OEM Part With ample efficiency for a stock vehicle, the OEM system quickly becomes a choking point for the engine when running Revo Software. With a generously sized air box, the standard plastic intake hose causes the most amount of restriction; convolutions designed to allow for engine movement disrupt airflow, a small internal diameter limits the volume of air and a sharp reduction in hose diameter at the turbo causes turbulence. Turbo Inlet The Revo machined inlet replaces the restrictive elbow found on the IS20/IS38 turbos. The machined billet aluminium inlet securely fits to the OE unit using locking tabs and integrated O-rings. With almost double the cross-sectional area compared to other available products, air can stabilise and distribute before a smooth tapered transition to the turbo. Removing the internal steps between components further ensures uninterrupted airflow and removes any unnecessary turbulence. Silicone Hose Design The Revo Turbo Hose as an increased inner diameter that gradually tapers from air box to turbo to optimise airflow, while maintaining the tolerances required to fit both LHD and RHD vehicles with a standard air box. Designed to directly replace the plastic hose and turbo elbow, this upgrade reduces restriction and maximises smooth airflow improving both power and torque throughout the rev range. A four-ply construction with an internal wire helix increases strength to prevent collapsing under pressure. Internal steps flush fit against the stock air box and the machined inlet, creating a smooth transition between components ensuring the smoothest airflow possible to the turbo. A machined bung is integrated in to the hose, connecting the stock PCV system vacuum. Research and Development All Revo products are designed in-house and are rigorously tested. The Revo Turbo Inlet Hose allows the Stock IS38 turbo to run more efficiently, intake a larger volume of air and minimise turbulence. This increases power and torque, especially at the top end of the rev range as highlighted during controlled Dyno testing. Graphs Data Up to 12WHP and 15NM gains Graphs produced with Revo stage 2 software on Audi S3 8V Stock Runs with complete OEM Air intake setup Revo Runs with Revo Intake Hose and ProPanel Filter Technical Documents The following documents are available to view: Fitting instructions Download the Revo Turbo Inlet Hose Fitting Instructions Vehicle Applications Audi A3 (8V) 1.8 / 2.0 TFSI 12 - Audi S3 (8V) 2.0 TFSI 12 - Audi TT (MK3) 2.0 TFSI 15 - Audi TTS (MK3) 2.0 TFSI 15 - Seat Leon (MK3) 1.8 / 2.0 TSI 12 - Skoda Octavia (MK3) 1.8 / 2.0 TFSI 12 - Skoda Superb 2.0 TSI 15 - Volkswagen Golf (MK7) R 2.0 TSI 12 - Volkswagen Golf (MK7) GTI 2.0 TSI 12 - Volkswagen Golf (MK7) 1.8 TSI 12 - * Fitments for 1.8 TSI & 2.0 TSI Engines with IHI IS20 and IS38 Turbos © Revo Technik

Read more less

Product Details In most vehicle applications, the rubber turbo inlet hoses found in the intake system are not designed for performance or modification. They were designed to get the job done, but when you add a performance filter, intake, or tune the stock hoses can start to show their weakness. The ECS Silicone Turbo Inlet Hose was engineered in-house with a high quality 5-ply construction, providing a strong but flexible structure to ensure a secure fit. A smooth interior provides unimpeded airflow, while the smooth, unassuming exterior adds an appearance upgrade to any engine bay.  ECS' Silicone Turbo Inlet Hose arrives with the necessary clamps for proper installation.  This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A5 Quattro 2.0T Audi B8 Allroad Quattro 2.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less