Racingline

Racingline Bonnet/Hood Gas Strut A Gas Strut conversion to lift & hold your bonnet/hood for Golf Mk8 (all models). A PRODUCT YOU SHOULDN’T NEED…..BUT DO! Just like it should have come from the factory… Our new Golf Mk8 Gas Strut conversion kit lets you get rid of the cheap bonnet prop that the car now comes with. Simple, and fully reversible DIY fit in ten minutes. No cutting or drilling required. After some experimentation, we have produced a gas strut with the correct length and pressure for the Golf 8 bonnet. Lifts and closes with the perfect resistance. Included is a high-grade stainless steel ball-end bracket, which screws onto the existing bonnet latch bracket stud – no new holes or drilling needed. At last – your bonnet will open easily and stay open while you’re working in the engine bay. Note: Will only fit Mk8 Golf models (nothing else!) Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR810002

Read more less

Racingline Performance Silicone Boost Hose Set EA888 Gen4The RacingLine Gen.4 Boost Hose package is a three-piece kit to replace the factory soft flexible rubber hoses and replace them with our beautiful reinforced silicone replacement versions. The kit is a direct OEM replacement: simply remove the factory hoses, and replace them with the three uprated silicone pipes. Simple.Stepped internal joint transitions give a port-matched laminar airflow path, greatly reducing turbulence versus other non-stepped designs.Of course the RacingLine hoses are pressure tested far beyond the turbo’s capabilities, allowing the system to maintain performance under extreme temperature and high-boost conditions. By minimising these restrictions, the smoother airflow and optimised hose routing ensures that the turbo meets less resistance and can thus perform more effectively - moving a larger volume of air and minimising turbulence.Within the kit, the two Intercooler Boost Hoses have unique steel wire helix buried within the silicone construction to eliminate the very real risk of hose collapse, yet still allowing sufficient flexibility without wall distortion and minimising airflow blockage.A great upgrade for any remapped 2.0 TSI EA888 gen.4 car running higher boost than standard. Also available with : 1. addon Turbo Outlet Hose for 300hp+ Vehicles with Continental Turbocharger  2. Boost Hose Kit and Muffler Delete Kit for 245hp Vehicles with Garrett Turbocharger Only Compatible with the following Vehicles:  > VW Golf 8 GTI 2020+> VW Golf 8 GTI Clubsport 2020+> VW Golf 8 R 2020+> VW Arteon R 2.0 TSI 320ps 2020+> VW T-Roc R 2.0 TSI 2021+> Audi S3 8Y 2020+> Audi A3 2.0 TSI 8Y 2020+> Audi TT 45 TFSI 2.0 TSI 8S 2021+> Audi SQ2 2.0 TSI EA888.4 2021+> Cupra Leon IV 300 TSI FW 2020+> Cupra Leon IV 245 TSI FW 2020+> Cupra Ateca 300PS EA888.4 2021+> Cupra Formentor 310PS 2020+> Cupra Formentor 245PS 2020+> Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+> Skoda Superb III 3V 2.0 TSI EA888.4 2020+> Skoda Kodiaq vRS 2.0 TSI EA888.4 2021+

Read more less

Racingline Brake Kit 5mm Hub Adaptor (Pair) 5×112 – VWR620005MM Clearance over big brake kits is always a challenge, especially with factory wheels. All of RacingLine’s brake kits feature our unique design that allows these 5mm Hub Adaptors to be solidly, mechanically mounted onto the front face of the disc to give you that extra clearance. No more adding loose spacers onto your car. Fitting and removal of the Hub Adaptor is a simple, reversible upgrade that takes minutes to do. If you ever plan to change wheels in the future, or if you run different wheels for road or track, or winter and summer, just fit or remove the adaptors to suit. As these Hub Adaptors are mechanically locked onto the disc hub, They aren’t  classified as spacers in countries where spacers are illegal. The 5mm of extra space will mean that the OEM factory wheels will fit over our brake kits. POSITIVE FIXATION  Clever ‘petal’ design (female on the disc, male on the Hub Adaptor) plus a fixing screw physically locks the two parts together. HIGH QUALITY Beautiful midnight-black gloss anodised finish will keep the Hub Adaptors looking beautiful and  corrosion -free. INSTALL & REMOVE Removal and refit just takes minutes to do if you ever change your wheels. Perfect for the: RacingLine Stage 2 Monoblock Performance Brake Kit RacingLine Stage 3 Forged Monoblock Performance Brake Kit​ Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR620005MM

Read more less

Racingline Carbon Fibre Air Intake System RS4/RS5 (B9) 2.9 V6 TFSI Our latest Cold-Air Intake System kit for the current ‘B9’ Audi S4, RS4 and S5, RS5 enables cold, dense air from outside the engine bay to reach the fuel metering unit more efficiently for great power gains. Our High-Flow TriFoam™ triple-layer construction is simply the best filtration material on the market, and is the key to the power gains achieved Each filter is handmade in the UK The intake uses a clever design which retains the original Audi lower box of the intake, adding in a replacement lid, TriFoam™ filter and front intake scoop By reducing turbo spool by up to 500rpm in some cases through the enhanced efficiency of the system, lightning fast turbo response is guaranteed.  In our experience, no other intake kit gives higher gains It’s not just about performance; the beautiful carbon weave of the intake will enhance your engine bay every time you lift the bonnet! How does it sound? You’ll hear the rich induction noise from this race-bred intake as soon as you accelerate hard. However, as a fully-enclosed intake, volume levels are well-contained. Confirmed Applications Audi RS4 (B9) 2.9 V6 TFSI 2018+ Audi RS5 (B9) 2.9 V6 TFSI 2018+ Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR1241RS4

Read more less

Racingline DSG Oil Cooler System for MQB DQ381 (7 Speed Only) – VWR29DQ381 It’s not just your engine oil that you need to protect. Your DSG gearbox is susceptible to overheating. And the higher your power, the harder you drive, the more important it is to protect it. Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade – losing its lubrication properties. When this happens, the DSG will protect itself and begin to lower the torque, increase shift times and in extreme circumstances even loose gear selection. The RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15  – 20   degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune). The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler – doubling up your cooling capability when it’s needed with less heat transfer into the water system. Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow. What’s included in the kit Oil cooler mounting brackets AN10 210 series Nylon braided feed and return line Billet CNC thermostatic adaptor block Replacement, low-profile oil/water cooler AN10 10-row oil/air cooler core Fitting kit containing all necessary nuts, bolts, washers and rubber mounting bobbins The kit for all MQB cars comes supplied with two bracket kits. One kit is for Audi S3 models, the other is for all Golf 7 and other MQB models. Mounting for the bracket set requires drilling bolt holes through the front crash bar. Product Variations DSG DQ250 6-SPEED VWR29G7250DSG DQ381 7-SPEED VWR29DQ381 Why fit a DSG Cooler Kit? Our unique DSG Oil Cooler Kit is an essential fit for any hard-driven MQB 2.0 TSI car running high power levels or in hot climates. It’s a complete ready to install package, using a clever sandwich plate design for straightforward and completely reliable installation. Transferring more power and torque through the DSG gearbox generates ever more heat to dissipate.  Significantly increased oil temperatures means only one thing: a decrease in the ability for your DSG box to stay properly cooled, eventually causing power drop and gear selection issues. Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade – losing its lubrication properties. When this happens, the DSG will protect itself and begin to lower the torque, increase shift times and in extreme circumstances even loose gear selection. The RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15  – 20   degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune). The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler – doubling up your cooling capability when it’s needed with less heat transfer into the water system. Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow. Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR29DQ381

Read more less

One of the most cost-effective improvements you can make to your car, improving power and economy. The Racingline Performance Panel Filter simply fits directly into the airbox as a direct replacement for the standard restrictive paper air filter element.   Audi A3 (8P) 2.0 TFSI SEAT Altea 2.0 TFSI SEAT Leon (1P) 2.0 TFSI Sport / FR 2.0 TFSI Cupra / Cupra R SEAT Toledo (5P) 2.0 TFSI Skoda Octavia (1Z) 2.0 TFSI vRS VW EOS (1F) 2.0 TFSI VW Golf Mk5 2.0 TFSI GTI 2.0 TFSI GTI Ed30 VW Golf Mk6 2.0 TFSI GTI Ed35 2.0 TFSI ‘R’ VW Jetta Mk5 2.0 TFSI VW Passat (B6) 2.0 TFSI VW Passat CC 2.0 TFSI VW Scirocco Mk3 (13) 2.0 TFSI ‘R’ Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR11G502

Read more less

High-Flow Panel Air Filter – TT RS (8S) RS3 (8V) – VWR1130RS Looking for a simple, warranty-friendly upgrade for your car? Racingline’s HIgh-Flow Panel Air Filter for the latest and greatest Audi RS3 8V.2 and TTRS 2.5 TFSI cars replaces the restrictive factory paper filters with an improved, high flow and reusable lifetime triple-layer Trifoam filter. Allow your engine to breathe better and operate more efficiently – improve the engine’s airflow, and power and fuel economy gains will follow. By removing the inevitable restrictions that the standard paper panel filter gives, Racingline’s Panel Filter allows a small but worthwhile increase in airflow through to the turbo.    Simply put, it’s the best panel air filter you can buy. TRIFOAM® FILTER Racingline’s unique Trifoam® filter construction allows them to sandwich three different foams together for the perfect filtration and minimum restriction. HAND-MADE IN UK Each filter construction is hand-made in the UK for the reassurance of the highest quality together with exceptional dust-loading properties. EFFICIENCY GAINS The result?  More mid-range power and improved economy, without wrecking your warranty. Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR1130RS

Read more less

Racingline Magnetic Drain Plug for EA888 Gen.3 Engines (with Plastic Oil Sump) – VWR180004 Racingline’s Magnetic Oil Sump Drain Plug is now available for the 1.8 & 2.0 TSI EA888 gen3 and 2.0 TSI gen3B engines. These engines use a plastic oil pan, meaning that normal metal, screw-in sump plugs simply can’t be used. Our new ‘True-Lock’ fitting system means that, at last, you can protect your engine. By attracting and separating out the minute abrasive and ferrous metal particles that are carried by the oil, it prevents them from circulating throughout your engine’s lubrication systems. The harder your engine works, the greater the risk of nasty metallic debris, the greater the benefit of using a magnetic sump plug. Our unique ‘True-Lock’ fitting works with a simple quarter-turn to install the plug, then a PolyCarbonate locking ring ensures that it stays tight and sealed at all times. It’s a lifetime-use plug – simply replace the O-ring at each service. Install couldn’t be simpler – insist on our new Magnetic Billet Sump Plug with your next oil-change and simply screw it in! 2.0 TSI & 1.8 TSI / EA888 Gen 3 engines2.0 TSI / EA888 Gen 3B engines Notes: For plastic engine oil sumps only.

Read more less

Racingline MQB Propshaft Bearing Alignment Kit Our new MQB RacingLine Propshaft Bearing Alignment kit cuts out the factory tolerances to maintain accurate propshaft alignment every time, all of the time. Our precision-engineered, Propshaft Bearing Alignment Kit centralises the factory centre support bearing carrier by cutting out the enlarged factory hole tolerances. Meaning your propshaft is held in perfect true orientation at all times. The oversize holes on the factory brackets are designed to allow several degrees of ‘twist’ on the centre bearing carrier, causing unnecessary long-term stresses on the prop, bushes and bearings. That may be great to help the factory with quick production-line assembly, but will lead to accelerated wear on the bush and rubber housing from misalignment. Every hard launch & shift provokes movement in the drivetrain – over time this risks shifting the factory prop mount out of alignment. This simple alignment kit reduces the bolt hole size down from M14 to M8, allowing no further twist from the brackets and ensuring that your prop cannot move from this position. Fit this Propshaft Bearing Alignment Kit once, then forget it. Drive your car safe in the knowledge that your propshaft will remain in the correct alignment forever more and prolong the life of the bearings and bushings. Prior to our development, we were amazed how many cars were out of alignment from factory! Confirmed Applications For all MQB & MQB Evo AWD modelsVWR810009 VW Golf 8 R 2020+VW Golf 7 & 7.5 R 2013-2020VW Passat 2.0 BiTDI 4Motion B8 2015+VW Arteon 2.0 BiTDI 4Motion 2017+VW Arteon R 2.0 TSI 320ps 2020+VW T-Roc R 2.0 TSI 2019+VW Tiguan II 2.0 BiTDI 2016+ Audi S3 8Y 2020+Audi S3 8V 2013-2020Audi RS3 2.5 TSI 8V evo 2017-2020Audi TT 3 2.0 TSI 8S 2014+Audi TTS 3 2.0 TSI 8S 2015+Audi TTRS 3 2.5 TFSI 8S 2017+Audi SQ2 2018+Audi RSQ3 F3 2019+ SEAT Leon III Cupra ST 4Drive 5F 2017-2020SEAT Tarraco 2.0 TSI 190ps 2018+Cupra Ateca 2018+Cupra Formentor 310PS 2020+ Skoda Superb III 2.0 TDI 3V 2015-2020Skoda Kodiaq vRS 2018+

Read more less

Racingline Oil Filter Housing Audi (B9) S4, S5, RS4, RS5, SQ5 – VWR190001 Tired of staring at your cheap, brittle plastic oil filter housing every time you lift your bonnet? Us too, and that’s why we’ve come up with our beautiful billet Oil Filter Housing to replace it. It’s made to match OEM dimensions right down to the original factory size hex nut. The Filter Housing accepts the factory engine oil filter to maintain simplicity and keep that OEM fitment for your future oil changes. A quality part means you can forget about the problems of cracked plastic housings forevermore. Applications Audi S4 (B9) 3.0 V6 TFSI 2017+ Audi S5 (B9) 3.0 V6 TFSI 2017+ Audi RS4 (B9) 2.9 V6 TFSI 2018+ Audi RS5 (B9) 2.9 V6 TFSI 2018+ Audi SQ5 (B9) 3.0 V6 TFSI 2018+ Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR190001

Read more less

Racingline Performance R600 Intake EA888 Gen.4 Cold Air Induction Kit The RacingLine R600 Intake is the world’s most sophisticated and best-selling MQB-platform cold air intake, with a choice of two filter element types. And now, introducing our new R600 EVO version for the latest MQB EVO models such as Golf 8, Audi S3 8Y etc. Looking for the most sophisticated cold-air intake available for your MQB or MQB ‘EVO’ 2.0 or 1.8 TSI? The R600 intake is our best selling system for this platform. Little wonder, as it combines OEM-standard design and quality with significant power gains on uprated cars. OEM-standards of design, quality, materials and construction, hand-made in the UK. Fits like a factory part; lasts like a factory part. Twin CFD-optimised front intakes extending across the front of the car help achieve lower intake temperatures and worthwhile power gains. Enormous airbox volume houses the filter, complete with thoughtful details like connection to the original factory drain tube, and an SAI connection for US cars. Your choice of filter unit, to suit different needs. Both are double the size of standard – rated right up to 600hp and beyond. TRIFOAM® or Pleated Cotton Filter? Foam – Faster, for longer – The highest airflow of all filter types, for the best possible power for more of the time. As a high performance part, regular maintenance is essential to keep it at its very best. Cotton – Fit and forget – A robust ‘fit and forget’ filter that will last for years. It gives great initial power output but doesn’t have the dust-loading capacity of Trifoam. Ideal for Stage 1, 2 and 3 Tuning The PU material used for its construction is the same as the original factory air box and engine-cover, textured to match into the exact same finish. But it’s not just the appearance that’s built to OEM standard. The mounting points use the factory system, ensuring simple and reliable fitment, with nice details such as the factory drain-hole being retained. Huge filter area = 43,200mm Huge power gains over 4000rpm Racingline Performance R600 filter area = 96,477 mm Hand built in the UK Confirmed Fitment 2.0 TSI MQB ‘EVO’ / EA888.4 engines NEW!VWR1200R600E Trifoam filter // VWR1200R601E Cotton filter VW Golf 8 GTI 2020+VW Golf 8 GTI Clubsport 2020+VW Golf 8 R 2020+VW Arteon R 2.0 TSI 320ps 2020+VW Tiguan II 2.0 TSI 245ps 2021+VW Tiguan II R 2.0 TSI 320ps 2021+ Audi S3 8Y 2020+Audi A3 2.0 TSI 8Y 2020+ Cupra Leon IV 300 TSI FW2020+Cupra Leon IV 245 TSI FW 2020+Cupra Formentor 310PS 2020+Cupra Formentor 245PS 2020+ Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR1200R600E-PAR

Read more less

Racingline R600 Carbon Fibre Intake Lid – Gloss/Matte Finish Transform your engine bay with the addition of a true R600 carbon fibre lid. Confirmed Fitment Suitable for existing R600 Intake part numbers; VWR12G7R600 VWR12G7R601 VWR12G7R600E VWR12G7R601E Not suitable for EA888 Gen.4 Engine Vehicles – e.g. S3 8Y, Mk8 Golf R, Cupra Leon Mk4. Applications Please note, customers are wholly responsible for checking fitment for their vehicle.

Read more less