ECS Tuning Shop

Product Details Relieve worry of an unfortunate impact creating an oil leak from the factory plastic oil pan by replacing it with a direct-fit stamped steel pan! MQB engines are currently equipped with a plastic oil pan from the factory. It's not a bad part, but it does present the issue of plastic being more prone to crack and create an oil leak in the event of an impact over a stamped steel counterpart that will typically dent, depending on the severity of the impact. This kit allows you to change out your current plastic oil pan with a stamped steel version that bolts right up!  Kit Includes: Stamped Steel Oil Pan Oil Pan Silicone Sealant Oil Pan Securing Hardware Oil Level Sensor Securing Hardware Settle for nothing less than complete protection with the Steel Oil Pan Kit! Be sure to check out the ECS Magnetic Drain Plug for your new oil pan to capture any harmful particles to help prevent premature wear, available as es2784400. *Note:  For non-MQB chassis, this is just an oil pan replacement kit. Replacement drain plug part number: N91167901.  Replacement drain plug gasket part number: N0138157. This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen All All 1.8T Gen3 Volkswagen All All 2.0T Gen3 GLI Volkswagen Beetle All 2.0T Gen3 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details    Protect your oiling system with confidence with our ECS Stainless Steel Oil Pan! Able to handle more abuse than the original, fragile plastic oil pan, all while retaining major ground clearance * and increasing oil capacity simultaneously. If you've ever worried about rocks or debris in the road compromising your fragile oil pan, this is MUST HAVE PROTECTION!  Not just another aluminum pan susceptible to cracking, our pan is beefy! Made from 11 gauge (1/8") T304 stainless steel and then 100% TIG welded and pressure checked for a perfect seal. To further ensure optimum sealing capacity, the mounting flange is thick, laser cut from 3/16" thick T304 stainless and then post machined and checked for flatness to our tight tolerances. Added strength and modularity is added into our design with six sturdy side gussets that are welded to the side walls and mounting flange surface. A welded-on M14x1.5mm bung converts your Gen3 engine to a standard, easy to use drain plug with our included ECS Magnetic Drain Plug. Factory provisions for the OEM oil level sensor are retained for direct, plug and play functionality. Topping off our pan is a laser cut "ECS" logo in the front corner for a subtle finishing touch.  Increasing oil capacity and ensuring oil temps stay in the safe zone were incorporated into our design. By bringing the sump further forward we were able to utilize more volume, approximately 1.0 - 1.5 Liters of added oil capacity, which helps extend oil service intervals and maintains more consistent operating temperatures. We also took our design a step further and added an integrated baffle plate to keep engine oil fixed around the oil pickup tube. Not available on OEM oil pans, our baffle plate helps to minimize oil starvation during hard cornering and braking.  Our pan is in-house designed and tested, made in the U.S.A. and engineered for the elements. A long-winded design journey that took several design revisions and multiple prototypes, we're proud to finally offer a SERIOUS oil pan with SERIOUS protection to the VW/Audi market! This kit includes ALL the required installation components to install onto your transverse mounted MQB Gen3 TSI engine.   This includes the following: ECS Stainless Steel Oil Pan Shorter T30 Oil Pan Mounting Bolts - QTY 20 Oil Level Sensor Securing Nuts - QTY 3 Conventional M14x1.5mm ECS Magnetic Oil Pan Drain Plug w/ Crush Washer  Oil Pan Gasket Sealant - 70ml   TECH SPECS: 11 gauge thick floor section 14 gauge thick wall sections Full construction T304 Stainless Steel and 100% TIG Welded Oil Pan Weight:  8.75 pounds Maximum Height of Oil Pan: 73.0mm (* OE 71.5mm) Increased Oil Capacity Over OEM:  Approximately 1.0 - 1.5 Liters additional This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8V S3 Quattro 2.0T Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V Quattro 2.0T Audi MK3 TT (2014+) Quattro 2.0T Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 Volkswagen Jetta VII GLI 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less