Ford Fiesta MK7 Pre Facelift

Size: A=71mm B=50mm Quantity per car: 3/4 Price is for One Item

Read more less

PFR19-2030 is designed to eliminate creaks and squeaks from the rear springs. We have used our durable Purple 80 Shore A material to target reliability issues of the original part, since the softer OE specified foam quickly deteriorates, even on newer vehicles. OEM Part Number: 2037363 OEM Part Number: BV2Z-5586-B Quantity per car 2 (Price is for amount in pack)        

Read more less

These Road Series polyurethane bushes use Purple 80 Shore A material as fit and forget durable alternative to the original Fiesta MK7 models part.  Ford Fiesta Mk7 ST (2013-) Rear Beam To Chassis Bush PFR19-1511 OEM Part Number: 1805815 OEM Part Number: D65128460 Price Ex. VAT: £32.35 Price Inc. VAT: £38.82 Quantity per car 2 (Price is for amount in pack)   Fitting Instructions:1. Remove the original rubber bush from the rear beam, make sure to retain the original mounting bracket.2. Clean any dirt and corrosion from the bore of the arm and file off any sharp edges.3. Push in the polyurethane bush with the larger lip diameter facing the outside of the beam, as shown in Figure 1.4. Apply the supplied grease to the bore of the polyurethane bush and press fit the stainless steel sleeve into the bore of the bush.5. Re-fit the rear beam to the mounting bracket and to the vehicle and tension all hardware to manufacturers recommended torque settings.

Read more less

Fits manual and DCT transmission models only. This part is designed to limit excessive movement of the upper transmission under load by providing additional stability to the mount from filling excessive voiding in the original mount. This insert is very easy to fit and is a fast way to improve shift feel and performance. This should be considered as a performance upgrade and therefore an increase in noise and vibration is to be expected. OEM Part Number: 1796438 / C1BY-7M121-AA OEM Part Number: 1536197 / 8V51-7M121-AE. Price Ex. VAT: £32.35 Price Inc. VAT: £38.82 Quantity per car 1 PRODUCT PRICING INFORMATION The prices shown on our website are per bush.To get the total pack price you will need to multiple this price by the number of bushes per vehicle. Bush Price x Qty Per Car = Pack Price INSTRUCTIONS/DRAWING         

Read more less

Kit contains 2 x 12.9 Steel camber bolts, tab washers and nuts. Camber adjusting bolt to replace the original 12mm bolt. This fits 2 bolt hub to strut models only. Check bolt diameter. Size 12mm Price Ex. VAT: £18.30 Price Inc. VAT: £21.96 Quantity per car 1 PRODUCT PRICING INFORMATION The prices shown on our website are per bush.To get the total pack price you will need to multiple this price by the number of bushes per vehicle. Bush Price x Qty Per Car = Pack Price INSTRUCTIONS/DRAWING        Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts. Click HERE for more information

Read more less

FORD JACK PAD ADAPTOR PF19-860 PF19-860 is a polyurethane jack pad to fit around and protect the sill, designed to help lift stability and location, whilst protecting the underside of your vehicle. Size75mm DiameterFitment Guideline:Ford C-Max MK1 (2003-2010), Ford C-Max MK2 (2011 ON), Ford Fiesta Mk7 (2008 - 2017), Ford Fiesta Mk7 ST (2013 - 2017), Ford Fiesta Mk6 inc ST (2002-2008), Ford Focus Mk1, Ford Focus Mk1 RS, Ford Focus Mk1 ST, Ford Focus MK2, Ford Focus MK2 RS, Ford Focus MK2 ST, Ford Focus Mk3, Ford Focus MK3 RS, Ford Focus Mk3 ST, Mazda Mazda 3 BK (2004-2009), Mazda Mazda 3 BL (2009-2013)

Read more less

The PFF19-2025 poly engine mount insert is available from stock and backed by the Powerflex Lifetime Warranty. Although not a necessity, many of our customers fit the PFF19-2026 gear box insert at the same time for ultimate ST torque control.  Ford Fiesta Mk7 ST (2013-) Front Upper Engine Mount Insert PFF19-2025 This is an insert to fit into the original mount to limit movement of the engine to provide stability under acceleration. If fitting this to a diesel engined vehicle, an increase in noise and vibration is to be expected. This should be considered as a performance upgrade. Diagram Position: 25 Number of Bushes Supplied: 1 OEM Part Number: C1BY-6F012-BA OEM Part Number: 8V51-6F012-AJ Fitting Instructions:1. Clean any dirt and corrosion between the engine mount and the engine mount plate.2. Twist the polyurethane insert bush to open the bore along the split line and proceed to align the bore around engine mount rod. Once the bore is aligned it should allow the polyurethane bush to return to its original circular geometry. Make sure the textured surface is facing the engine mount. As shown in Figure 1, Pt1.3. Take the supplied O ring and carefully stretch it over the engine mount plate onto and around the polyurethane insert bush. The O ring should fit comfortably in the radial groove around the insert; preventing the insert from opening. As shown in Figure 1, Pt2.4. Re-fit engine mount to the vehicle. Tension all hardware to manufacturers recommended torque settings.

Read more less

Ford Fiesta Mk7 ST (2013 - 2017) Lower Engine Mount Bracket & Bushes, Fast Road PFF19-2020 Combining a new CNC machined aluminium lower torque mount with various durometer options to suit differing states of tune, this is a great way to reduce the amount of engine movement during hard acceleration and gear changing. It's also super easy to replace - just two bolts and it's out with the old, in with the new and no pressing out of any rubber! PFF19-2020 Lower Engine Mount Bracket & Bushes (Yellow 70A) is 50% stiffer than the OE mount and recommended for fast road use for standard or mildly tuned cars. Original rubber engine mounts can quickly become cracked and perished, causing excessive engine movement. Diagram Position: 6 Number of Bushes Supplied: 1 OEM Part Number: 1 695 146 OEM Part Number: 1313587Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

Ford Fiesta Mk7 ST (2013-) Front Arm Rear Bush, Caster Adjustable PFF19-1502G PU ball design comes built up, in a press fit capsule, caster adjustable Diagram Position: 2 Number of Bushes Supplied: 2

Read more less

Ford Fiesta Mk7 ST (2013-) Lower Engine Mount Small Bush 30mm Oval Bracket PFF19-2002 This part fits models with thicker (30mm) oval brackets only. For thinner (25mm) oval bracket use PFF19-2004 Diagram Position: 5 Number of Bushes Supplied: 1

Read more less

Ford Fiesta Mk7 ST (2013-) Lower Engine Mount Large Bush 30mm Oval Bracket PFF19-2001 This part fits models with thicker (30mm) oval brackets only. For thinner (25mm) oval bracket use PFF19-2003. Diagram Position: 6 Number of Bushes Supplied: 1 OEM Part Number: 1 695 146

Read more less

Included within this Powerflex suspension pack are the following parts for the Fiesta Mk7 ST: PFF19-1531 Front Wishbone Front BushPFF19-1502G Front Arm Rear Bush, Caster AdjustablePFR19-1511 Rear Beam To Chassis BushPFF19-2001 Lower Engine Mount Large Bush 30mm Oval BracketPFF19-2002 Lower Engine Mount Small Bush 30mm Oval Bracket   Ford Fiesta Mk7 ST (2013-) Powerflex Handling Pack PF19K-1004   Backed by the Powerflex Lifetime Warranty Number of Bushes Supplied: 1 Kit

Read more less