Performance - Audi RS3 8P

Product Description Fits: RS3 (8P Chassis). 2011-2013. 4 Line set. Why should I change my to Braided Stainless Steel ones? YOUR SAFETY! Better brake pedal feel – firmer under pressure More efficient braking- the PTFE lined, Stainless steel will not expand under load unlike OEM rubber hoses Long Lasting- PVC outer and Stainless-Steel end fittings will outlast the standard Mild Steel and rubber lines many times Available in many outer colour options to compliment your vehicle Rigorously tested and approved to the FMVSS 106 certification standards  

Read more less

As this kit will be made bespoke for you, please allow 10-15 working days for manufacture and testing of the kit, this can vary depending upon workload and current COVID restrictions.Please note, all kits are for European specification vehicles only. Please contact us if you require a kit of another specification. Goodridge Premium Performance Brake Lines for for Audi RS3 2.5 TFSi Sportback 2011-2012. Superior to OEM brake lines, Goodridge Premium Performance Brake Lines feature a PTFE liner, wrapped in a stainless steel braided outer, ensuring that the line doesn’t expand under pressure. Effort exerted at the brake pedal is transferred directly to the calliper. Goodridge Premium Performance Brake Lines have been developed on the track, for use on the road. No expansion, firmer braking and increased confidence. Please note: All Goodridge Premium Performance brake line kits are supplied with copper crush washers where necessary.

Read more less

Our disc installation kits come with everything you need to install a big brake kit excluding the calipers and pads, allowing you the quality of Vagbremtechnic products with the option to source and supply your own ‘bargin’ priced new or second-hand  8 Piston Brembo Calipers which can be found from the Audi RS4 B7 / Audi R8 / Lamborghini Gallardo. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either a grooved or drilled. Matched with our lightweight aluminium bells finished anodised in black, this brake disc setup is a floating 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. Included in our kit:2x Caliper carriers2x 362×32 2 piece front brake discs1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:2x 8 Piston Brembo caliper from Audi RS4 B7 / Audi R8 / Lamborghini Gallardo1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing

Read more less

Our disc installation kits come with everything you need to install a big brake kit excluding the calipers and pads, allowing you the quality of Vagbremtechnic products with the option to source and supply your own ‘bargin’ priced new or second-hand  8 Piston Brembo Calipers which can be found from the Audi RS4 B7 / Audi R8 / Lamborghini Gallardo. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either a grooved or drilled. Matched with our lightweight aluminium bells finished anodised in black, this brake disc setup is a floating 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. Included in our kit:2x Caliper carriers2x 362×32 2 piece front brake discs1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:2x 8 Piston Brembo caliper from Audi RS4 B7 / Audi R8 / Lamborghini Gallardo1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing

Read more less

This disc installation kit come with everything you need to install a our 2 piece 362x32mm front brake discs to your Audi RS3 8P. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either a grooved or drilled. Matched with our lightweight aluminium bells finished anodised in black, this brake disc setup is a floating 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. New pads are highly recommended to be installed. Included in our kit:2x Caliper carriers2x 362x32 2 piece front brake discs1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing

Read more less

This is a ‘competition-only‘ pad designed to offer the very best performance in torque, feel, fade resistance and release. H16-03 won’t start to show signs of fade until around 900+°c which is well above what brake systems are designed to cope with in general. High initial ‘bite’ coupled with very good release characteristics means the driver can attack the braking area with little concern for locking wheels and improved confidence. Use this pad in most high stress brake applications for excellent results

Read more less

Pagid RS - Allround Racing Brake PadsRS14GT cars, Touring cars for club racing and track days.RS 14 features good allround characteristics for many applications. It is a low metallic resin bonded material containing steel and acrylic fibers. RS4-2Classic rally pad and also very popular in small formula and touring cars.RS 42 is a low metallic resin bonded material containing steel and acrylic fibers. The characteristics make this material appropriate for small formula cars. RS4-4Very good rear axle pad for all front engine cars. Very popular club racing compound.RS 44 works for formula cars all the way up to lighter passenger cars. It is a low metallic resin bonded material containing steel and acrylic fibers. The smooth progression of friction from cold to hot makes this material easy to work with. Pagid RSL - Endurance Brake PadsRSL1Used in GT cars, Touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well.RSL 1 is a low metallic resin bonded material containing steel and acrylic fibers. It maintains a constant friction level over a wide range of temperatures. Its low wear rate and disc friendliness makes this material appropriate for endurance races. RSL2GT cars, Touring cars and prototype endurance racing. Due to excellent modulation characteristics often also used in sprint races.RSL 2 is based on the RSL 1 compound but has been further improved in terms of pad and disc life as well as friction stability vs. temperature.It is a low metallic resin bonded material containing steel and acrylic fibers. Furthermore it maintains a constant friction level over a wide range of temperatures. RSL19Rear axle usage in combination with RSL 1 and RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and Touring cars.??????RSL 19 is a low metallic resin bonded material containing steel and acrylic fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristic RSL29Very popular in club racing and track days. GT cars, Touring cars and prototype endurance racing. Due to excellent modulation characteristics also often used in sprint races.RSL 29 features very good modulation and release characteristics. It is a low metallic resin bonded material containing steel and acrylic fibers.The friction level of the material maintains constant at a low-medium level. Another advantage is the easy bedding in behavior. Pagid RST - Rally, Sprint and Stock Car Racing Brake PadsRST1Rally tarmac, GT cars and Touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors.RST 1 has a very high friction level and high temperature resistance. It is a semi metallic resin bonded material containing steel and acrylic fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. RST2Rally tarmac, GT cars and Touring cars circuit racing and NASCAR. Also used as rear pad in combination with RST 1 front. Recommended for GT and Touring Car racing on tracks where higher temperatures are an issue.RST 2 is a semi metalic resin bonded material containing steel and acrylic fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. RST3Rally tarmac and gravel, GT cars, Touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.RST 3 is a medium-high friction metal- ceramic compound containing steel and acrylic fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. RST4Formula cars and open wheel racing. Rear axle material for Rally (tarmac and gravel) and for all front engine cars. Also used in NASCAR on long ovals.RST 4 is a semi metallic resin bonded material containing steel and acrylic fibers. This material has a medium friction level and high temperature resistance. RST5Specifically designed and developed for rally racing. Comes for a variety of different pad shapes established in rally sports, especially WRC and Group R.The RST 5 is tailor-made for the challenging requirements of rally sports. Due to its optimized thermal management, it provides ideal performance from low temperatures to extremely high temperature conditions. Thus, it has a great cold ramp-up behavior. Its ideal heat transfer guarantees that the generated heat stays in the brake pad and does not move into the brake fluid, making the RST 5 highly fluid fade resistant.The recovery properties of the material also provide assurance of a constantly ideal operating temperature. With its high initial bite and generally high friction level the RST 5 is a new rally material that perfectly manages the balance between high aggression and prevention of wheel spin, providing the driver with a feeling of reliability and outstanding performance, even under the most demanding conditions. Pagid RSC - Racing Brake Pads for Ceramic Composite DiscsRSC1Race and track day compound for all known types of ceramic brake discs.RSC 1 is a low metallic resin bonded material containing steel and acrylic fibers. This material features good allround characteristics and is suitable for all types of usage. RSC2Special race compound for ceramic discs with a high content of fibers in the friction surface for sprint and endurance circuit racing.RSC 2 is a low metallic resin bonded material containing steel and acrylic fibers. This material is specifically developed for above mentioned applications. RSC3Special race compound for ceramic discs with low content of fibers in the friction surface for sprint and endurance circuit racing.RSC 3 is a low metallic resin bonded material containing steel and acrylic fibers. This material is specifically developed for above mentioned applications.

Read more less

Type of Application:DS2500 - Off Road Use'Track Day' - Front and Rear of vehicle'Rally' - Rear of vehicle'Circuit Sprint' - Rear of vehicle'Formula' - Front and Rear of vehicle DS3000 - Off Road Use'Rally' - Front and Rear of vehicle'Circuit Sprint' - Front of vehicle'Formula' - Front and Rear of vehicle As a general guide we recommend that you consider the following when making your material compound selection: 4WD cars = same compound front and rear Rear traction cars = same compound front and rear. Front traction cars = high friction level in the front axle (i.e. DS3000), lower friction level on the rear axle (i.e. DS2500, 4003). For further advice please contact us. DS2500 (H)Track day & light race use for all vehicle types.Road style refinement but with race material ability to withstand heat with respect to life and μ.Average friction coefficient of 0.42 over working temperature range of 20°C to 500°C. DS3000 (R)Heavy duty all-round material choice.Multiple applications - touring car, rally, single seat.Average friction coefficient of 0.48 over working temperature range of 200°C to 650°C.

Read more less

The calipers included in this kit are 6 Piston AP Racing Radical II . The piston sizes are matched extremely well to provide a pedal feel that is just like OEM. This kit comes with Ferodo DS2500 brake pads. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either grooved or hooked. Matched with our lightweight aluminium bells finished anodised in black, this brake disc setup is a floating 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. *** INSTALLATION NOTE ***This kit will only fit vehicles with 19" Wheels or larger. On SOME 19" wheels there could be contact, we strongly recommend dry fitting for clearance before final installation.Wheel spacers or replacement wheels may be required.  Included in our kit:2x 6 Piston AP Racing calipers2x Caliper carriers2x 390x34mm 2 piece front brake discs1x Braided front brake lines1x Set of Ferodo DS2500 Brake Pads4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:Brake fluid to flush system when installing

Read more less

A Big Brake kit with 6 pot calipers and 356 x 32mm ventilated discs. The discs are grooved to remove braking residuals and maintain optimum performance. Included in the kit are Forge braided brakes hoses, mountings, and brake pads. This kit is suitable for the VW Mk5 Golf including R32, Golf Mk6/Mk7, Audi A3, TTRS, TTS, VW Scirocco, 2013 model VW Beetle, as long as they are fitted with 18inch or larger wheels. If you are running stock VW wheels, you may need to fit a 5mm spacer in order to clear the back of the spokes. To download our fitment template click here. This brake kit is supplied with either our Forge Ceramic Brake Pads (FMBKPAD) or  EBC Yellow Pads. For further information on EBC pads please see EBC website. Depending on your wheel design, you may need spacers between the hub and the wheel in order to clear the calipers. These kits do not have CE / TUV approval and are recommended for race use only Each Caliper weighs 3.25kg Each Disc weighs 9.35kg Torque Settings: Carrier to Hub 260NM Caliper to Carrier 139NM   Colour Code: Dark Blue- ZAK Beam Blue Download our guide on how to clean and maintain your Forge Motorsport Big Brake Kit Please Note: Forge Motorsport or its resellers will not offer any warranty or replacement if brake vibration, abnormal pad wear, caused by uneven discs which has resulted after poor and incorrect installation.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits Multiple Vehicles

Read more less

Revo Big Brake Kit UpgradeImproves stopping power under any condition OVERVIEW The Revo Big Brake Kit Upgrade is engineered to improve your stopping power in any condition. Whilst stock brakes are perfectly adequate for general driving; the braking system is often overlooked when enhancing a vehicle's performance. The Revo brake kit is made by world-leading brake manufacturer Alcon; utilising over 30years of motorsport braking innovation only the best materials, techniques and processes have been used. In-depth testing is a key factor in the development of our products; our brake kits have been aggressively tested in a variety of conditions in both road and track scenarios to ensure they meet the constant high stress of track days, sprints and fast road driving. Test kits were installed on our in house development vehicles along with several vehicles around the world and put through their paces to prove their worth over the stock setup; providing exceptional performance combined with consistency and durability you can rely on, corner after corner, stop after stop. Made by world leading brake manufacturer Alcon, only the best materials, techniques and processes have been used, with every step of the manufacturing process completed in the UK. Alcon has been at the forefront of motorsport braking innovation for over 30 years. BENEFITS Low Rotational Mass Improved Pedal Responsiveness Lower Long-term Maintenance Costs Superior Heat Dissipation: Less Prone To Fade Increased Braking Performance On & Off Track 100 - 0 MPH AVERAGE STOPPING DISTANCE CALLIPERS Our lightweight six-pot calliper is a single-piece aluminium Mono-bloc design. This design has been used to maximise rigidity, pedal feel and overall braking performance. The calliper incorporates a progressive six-piston setup to give great brake balance, and high quality seals increasing resilience to road salts and other corrosive elements. DISCS We use a two-piece floating disc and hat design to efficiently dissipate heat. The friction surface features crescent groves designed to increase bite and remove debris from the pad surface giving the perfect balance between brake feel and longevity. The discs feature internal cooling vanes that draw air from the centre of the disc outward to maximise heat dissipation and minimise heat transfer to the callipers, pads, and brake fluid, which plays an all-important part in providing consistent stopping power for your vehicle. BRAKE PADS We supply our brake kit with Ferodo DS Performance Pads that offer a consistent pedal feel and fantastic braking performance both from cold and when hot. Combined with low wheel dusting, minimal noise characteristics, and low disc and pad wear rates this is the ideal pad compound for general road and track driving. BRAKE LINES Our brake kit is supplied with stainless lines; consisting of a PTFE inner and stainless steel braided outer to eliminate the spongy feel of original rubber hoses, provide superior resistance to corrosion, and offer consistent braking performance. BRAKE FLUID Our brakes are supplied with Motul Dot 5.1 brake fluid; specifically designed for brakes systems with ABS. This is a long-life synthetic brake fluid with superior boiling point qualities to conventional Dot 3 and 4 spec. fluids. KIT CONTENTS Revo by Alcon Caliper x2 (3.3 Kg Each) Revo by Alcon Discs x2 (7.66 Kg Each) 6061 Aluminium Anodised Bell x2 6061 Aluminium Anodised Caliper Bracket Revo Stainless Steel Braided Brake Lines Motul Dot 5.1 Brake Fluid Ferodo DS Performance Brake Pads     TECHNICAL DOCUMENTS The following documents are available to view:   FITTING TEMPLATE Download the Revo Big Brake Printable 355mm Disc Template. See if the Big Brake kits will fit inside your wheels. FITTING TEMPLATE Download the Revo Big Brake Printable 380mm Disc Template. See if the Big Brake kits will fit inside your wheels.   FITMENT      Manufacturer Model Engine Year Audi RS3 (8P) 2.5 TFSI  2010 - 2012   Notes: Recommended Revo Authorised Dealer fitment only. Please contact your local Revo Authorised Dealer for additional information and availability.

Read more less