Performance - Audi RS4 B8

 MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, However we do recommend a re-map to ensure the issue is resolved.   M18 x 1..5 Fitment   Depending on stock levels at any given time you may be sent either the straight or right angled piece - These both function the same even though the differ in appearance

Read more less

Non-resonated (louder). Uses OE tailpipe trims Part No. Description Tailpipe Pipe Diameter Race EC MSAU507 LH Downpipe (resonated) 2.37" (60.30mm) MSAU508 RH Downpipe (resonated) MSAU577REP Centre Silencer Replacement Assembly MSAU510 LH Rear Silencer with Active Exhaust Valve MSAU511 RH Rear Silencer with Active Exhaust Valve Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Resonated. Without Valves in the rear silencers. Polished Oval Trims Part No. Description Tailpipe Pipe Diameter Race EC MSAU306 Twin Link Pipe Assembly 2.36" (60.00mm) MSAU307 LH Centre Section MSAU308 RH Centre Section MSAU315 LH Rear Section Special 224 MSAU314 Brace Bar MSAU316 RH Rear Section Special 225 Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Here we have the Oil Cooler Manifold as seen in our Oil Cooler kit for the Audi RS4 4.2 (B7 2006-2008) - FMOCRS4  This Oil Cooler Manifold replaces the OEM part to allow the installation of an aftermarket oil cooler in place of the cooler that comes from the factory. Our Oil Cooler Manifold is machined from 6082 billet aluminium and then anodised black to prevent any possibility of corrosion. The manifold has two AN-12 fittings to allow you to add your own braided lines to suit your specific needs.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Scorpion Exhausts Audi RS4 B8 4.2 FSI Quattro Avant/RS5 4.2 V8 Coupe Resonated half system inc active exhaust valve Fits Years to Fits to OEM / Scorpion Pipe Diameter 63.5mm/2.5 One of the VAG group companies Audi really became noticed as producers of performance road cars in the early 80’s with their release of the legendary Audi Ur Quattro, the world’s first all-wheel drive turbo production car. This was a real game changer which went on to win numerous world rally championships and sowed the seeds for their future high performance road cars. Scorpion has a heritage of producing high quality performance exhausts for these legends of the 80’s through to the highly sought-after performance models available currently.  TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SAU048 Product Type Half System Resonated Resonated Valve Yes Fitment Years 2010 - 2015 Fits To OEM / Scorpion Model Fitment B8 Pipe Diameter 63.5mm/2.5" * Tailpipe OE Fitment Tailpipe Diameter N/A Shipping Dimensions 119cm x 60cm x 28cm Notes RS4 12-15 / RS5 10-15

Read more less

Scorpion Exhausts Audi RS4 B8 4.2 FSI Quattro Avant/RS5 4.2 V8 Coupe Resonated cat-back system inc active exhaust valve Fits Years to Fits to OEM / Scorpion Pipe Diameter 63.5mm/2.5 One of the VAG group companies Audi really became noticed as producers of performance road cars in the early 80’s with their release of the legendary Audi Ur Quattro, the world’s first all-wheel drive turbo production car. This was a real game changer which went on to win numerous world rally championships and sowed the seeds for their future high performance road cars. Scorpion has a heritage of producing high quality performance exhausts for these legends of the 80’s through to the highly sought-after performance models available currently.  TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SAU048SYS Product Type Cat-Back Resonated Resonated Valve Yes Fitment Years 2010 - 2015 Fits To OEM / Scorpion Model Fitment B8 Pipe Diameter 63.5mm/2.5" * Tailpipe OE Fitment Tailpipe Diameter N/A Shipping Dimensions 119cm x 60cm x 28cm Notes RS4 12-15 / RS5 10-15

Read more less