Performance - BMW 1 Series F40

 MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, However we do recommend a re-map to ensure the issue is resolved.   M18 x 1..5 Fitment   Depending on stock levels at any given time you may be sent either the straight or right angled piece - These both function the same even though the differ in appearance

Read more less

Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M135i performance exhaust is made in 3"/76.2mm pipework and fits from the Gasoline Particulate Filter section backwards (GPF-back) replacing the centre and rear sections. GPF Back with Box Delete Test Results: Sound - Engine at Idle: 73.5dB (+10.5dB) - Static 3,800rpm test: 95.1dB (+13.1dB) All relevant fittings and gaskets are supplied. This exhaust offers a significant improvement in terms of exhaust tone, bass and sound level whilst keeping the stock catalyst and GPF in place. This exhaust has a choice of 4" (101.6mm) tailpipe options including a choice of carbon fibre tip options. Please Note: The 'Valved' exhaust retains the use of exhaust valves. When switching drive modes (e.g. Eco to Race mode) your exhaust tone will continue to swap from quieter to louder tones as before. The 'Non-Valved' exhaust removes the use of exhaust valves. When switching drive modes (e.g. Eco to Race mode) your exhaust tone will not change from quieter to louder as before. Using a Non-Valved exhaust will not harm the running of your vehicle, you will simply not have exhaust sound options, however, the Cobra Sport exhaust has been designed with this in mind. The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product. EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases.

Read more less

Direnza Ceramic Coated Exhaust Downpipes are manufactured from T304 grade stainless steel, and feature smooth, matte ceramic finish to give extra heat protection on those intense track-sessions. A direct replacement for the stock part, Direnza mandrel-bent exhaust components are fully TIG welded and feature CNC-machined flanges for strength and an accurate, secure fit everytime. Engineered to not only improve power and torque across the entire RPM range but Direnza exhaust components improve throttle response to help you push further and faster on the road or the track Fitment Mini F56 Cooper S 2.0T 2014-onwards modelsMini F54 Clubman S 2.0T 2015-2019 modelsBMW 1 Series F40 M135ix 2019-onwards models Please note-not suitable for F40 M135ix models with a GPF Product Category Exhaust Decat Exhaust Decat - Length (mm) 500 Exhaust Decat - Pipe Bore (mm) 90-70 Exhaust Decat - Other 2 x Sensor Ports

Read more less

Direnza GPF delete pipes are manufactured from T304 grade Brushed Steel for those intense track-sessions. A direct replacement for the stock part, Direnza mandrel-bent exhaust components are fully TIG welded and feature CNC-machined flanges for strength and an accurate, secure fit every time. Engineered to not only improve power and torque across the entire RPM range but increase volume and allow for additional power in the future should you ever want it. 3″ Diameter for maximum gas flow giving optimum performance increases Replaces restrictive GPF which restricts gaining more power from the 2.0L B48 turbo engine Tig welded from T304 stainless steel for maximum strength and rust prevention Designed to be a direct replacement for the OEM GPF for ease of installation GPF Delete Decibel Readings:Valves Closed: 81.9DBValves Open: 85.5DB May require bypass software on vehicle ECU. Fitment BMW 1 Series F40 M135i 2019 onwards models Bore Size (mm) - 76 Exhaust Sleeve Clamp - 76mm – 70mm

Read more less

Particulate Filter-back OPF/GPF Back System with GT-115 Burnt Titanium Trims (Proposed EC System Awaiting Testing) Part No. Description Tailpipe Pipe Diameter Race EC MSBM326 Adapter to OE GPF/OPF 3.00-inch (76.20mm) MSBM327 Connecting Pipe MSBM328 Rear Silencer Assembly MSBM329 LH Valved Outlet Pipe MSBM330 RH Outlet Pipe MSTIP253 x2 4.5" Tailpipe Trim Burnt Titanium 115GT Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Particulate Filter-back OPF/GPF Back System with GT-115 Cerakote Black Trims (Proposed EC System Awaiting Testing) Part No. Description Tailpipe Pipe Diameter Race EC MSBM326 Adapter to OE GPF/OPF 3.00-inch (76.20mm) MSBM327 Connecting Pipe MSBM328 Rear Silencer Assembly MSBM329 LH Valved Outlet Pipe MSBM330 RH Outlet Pipe MSTIP251 x2 4.5" Tailpipe Trim Cerakote Black 115GT Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Particulate Filter-back OPF/GPF Back System with GT-115 Polished Trims (Proposed EC System Awaiting Testing) Part No. Description Tailpipe Pipe Diameter Race EC MSBM326 Adapter to OE GPF/OPF 3.00-inch (76.20mm) MSBM327 Connecting Pipe MSBM328 Rear Silencer Assembly MSBM329 LH Valved Outlet Pipe MSBM330 RH Outlet Pipe MSTIP250 x2 4.5" Tailpipe Trim Polished 115GT Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Particulate Filter-back OPF/GPF Back System with GT-115 Titanium Trims (Proposed EC System Awaiting Testing) Part No. Description Tailpipe Pipe Diameter Race EC MSBM326 Adapter to OE GPF/OPF 3.00-inch (76.20mm) MSBM327 Connecting Pipe MSBM328 Rear Silencer Assembly MSBM329 LH Valved Outlet Pipe MSBM330 RH Outlet Pipe MSTIP252 x2 4.5" Tailpipe Trim Titanium 115GT Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Particulate Filter-back OPF/GPF Back System with JET-115 Carbon Trims (Proposed EC System Awaiting Testing) Part No. Description Tailpipe Pipe Diameter Race EC MSBM326 Adapter to OE GPF/OPF 3.00-inch (76.20mm) MSBM327 Connecting Pipe MSBM328 Rear Silencer Assembly MSBM329 LH Valved Outlet Pipe MSBM330 RH Outlet Pipe MSTIP244 x2 JET 115 Carbon Trims 115mm JET-115 Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M135i performance exhaust is made in 3"/76.2mm pipework and fits from the downpipe to the centre section, replacing the GPF exhaust section. This exhaust makes the system louder as it removes the GPF filter and therefore, offers a significantly sportier exhaust note. The resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. Fitment will require basic engine tuning at time of fitment to cancel the EML light. Fitment is for motorsport and off road use only. The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product. EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality.  This BMW M135i performance exhaust is made in 3"/76.2mm pipework and fit from the turbo backwards (turbo-back system), these parts replace the front pipe, centre and rear sections. The resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. Please Note: The 'Valved' exhaust retains the use of exhaust valves. When switching drive modes (e.g. Eco to Sport mode) your exhaust tone will continue to swop from quieter to louder tones as before. The 'Non-Valved' exhaust removes the use of exhaust valves. When switching drive modes (e.g. Eco to Sport mode) your exhaust tone will not change from quieter to louder as before. Using a Non-Valved exhaust will not harm the running of your vehicle, you will simply not have exhaust sound options, however the Cobra Sport exhaust has been designed with this in mind. IMPORTANT: this exhaust removes the PPF filter and will require engine tuning at time of fitment to cancel the EML light. Fitment is for motorsport and off road use only as this system removes the PPF filter. Fitted images show the non-valved resonated version. The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product. EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M135i performance exhaust is made in 3"/76.2mm pipework and fits from the turbo to the PPF section. The sports cat exhaust option will enable you to pass a UK MOT emissions test or police road side checks. The de-cat sports exhaust is sold for motorsport and off road use only and will NOT be able to pass a UK MOT emissions test or police road side checks. All relevant fittings and gaskets are supplied for fitment. Fitment will require basic engine tuning at time of fitment to cancel the EML light. The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product. EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases.

Read more less