Performance - BMW M3 F80

Manufactured from Aircraft Grade T-6061 Aluminium Billet our Gear Shift Paddle Set put you back in control of your E92 M3; added feel and ease of use make our Gear Shift Paddle Set the natural choice over the OEM Paddles. Our elegant paddle set has been specifically designed with the BMW M3 Performance Steering Wheel in mind and therefore follows the curves and lines of the wheel itself.  Available in two finishes to complement the interior of your BMW, either Titanium Silver or Dark Anthracite Grey. We have developed these paddles with the track in mind, making it easy for you to select gears no matter the steering angle. Along with maintaining the OEM Control Unit and replacing the whole paddle, not just being a bond-on unit.

Read more less

Issues relating to the standard three-piece crank hub on the S55 engine are widely known, but these are fully addressed with the installation of the MMR Performance one-piece billet crank hub and capture plate.The OE units friction plate are known to slip, causing the timing to alter enough that piston-to-valve contact can occur and, if not totally standard and within the warranty period, leaves owners with a very expensive repair bill!We know of this problem only too well, having experienced this issue twice ourselves, so we were committed to developing a product that would ensure owners of standard power outputs have complete peace of mind, as much as those that wish to increase the power and torque output without having to worry; MMR have engineered the most comprehensive solution on the market and at one of the most compelling price points. The MMR Performance one-piece crank hub is machined from billet EN36 that's been heat-treated with a 0.75mm case hardening, making it incredibly strong and durable. The one-piece design ensures the friction plates can't slip and with a new crank bolt tightened appropriately, this alone delivers a substantial improvement in reliability versus the OE version.For the ultimate solution, which then also removes the possibility for this bolt to be able to loosen, we've engineered an additional billet aluminium capture plate that securely houses the whole head of the crank bolt, making it impossible for it to come undone.  Careful design has also allowed us to develop a solution that's easy to install compared to some other products as there's no drilling or modification required to the OE crankshaft, which saves you time and ultimately money, too.The MMR crank hub kit is available in two forms, with either our one-piece crank hub, or our one-piece crank hub together with our billet capture plate, please select from the product option below before ordering. 

Read more less

Issues relating to the standard three-piece crank hub on the S55 engine are widely known, but include the need to ensure the OE crank bolt can't loosen, which is one cause of the crank hub friction plates starting to slip.Machined from T-6061 billet aluminium before being anodised in our trademark finish, the MMR Performance capture plate secures the head of the OE crank bolt and prevents it from turning or being able to loosen.Secured to either the MMR one-piece crank hub, or the OE crank hub, the elongated slots ensure a perfect, secure installation, every time.Installation of the capture plate is also possible with the engine remaining in-situ, with just the need to drop the radiator, in order to gain adequate access to install.Pleaste note: crank hub shown for illustration only.

Read more less

MMR Performance Oil Filter Housing for the BMW N20 / N52 / N54 / N55 / S55 Models The beautifully crafted billet aluminium MMR Performance Oil Filter Housing, finished in a polished anodised dark anthracite, provides a direct replacement for the plain looking plastic filter housing on the stock BMW engine.  The Oil Filter Housing is the latest addition to the stunning MMR Performance collection with each product within the collection providing an exquisite feel and exceptional product experience whilst creating a real focal point to your BMW engine bay. BMW models are equipped with a plastic oil filter housing that is not so easy on the eye and can be fragile to cracks when removing or replacing, this can lead to engine oil leaks. The MMR Performance Oil Filter Housing makes the necessary enhancements to prevent these problems occurring by improving the original design with their billet aluminium material. Not only does this provide your BMW engine bay with a light and durable replacement but it also provides a tasteful finish with the polished anodised dark anthracite coating. The MMR Oil Filter Housing Fits The Following BMW Engines: BMW N20 BMW N52 BMW N54 BMW N55 BMW S55 See more from MMR Performance in the YouTube clip below:  

Read more less

MMR Performance Charge Pipe Kit for the S55 F8x M2C / M3 / M4 Experience the signature MMR Performance high quality on your BMW M2C, M3 or M4 model with the MMR Charge Pipe Kit! This performance enhancing Charge Pipe Kit from MMR Performance provides your S55 powered BMW M2 competition, M3 or M4 model with everything you need to drastically enhance both the performance and reliability of the model. The pipework on the standard BMW Charge Pipes is not up to the required standard in order to run the increased boost pressure. The increased boost can be prone to splitting or cracking making it not ideal for BMW models running exceptionally high amounts of power. The lightweight construction of the MMR Charge Pipe Kit provides a direct replacement for these inadequate pipes, therefore offering an appropriate solution to the pipe splitting problems whilst assuring you of the signature MMR Performance quality, even at the significantly higher power outputs.  Looking as good as they perform, the MMR Performance Charge Pipes are constructed in the finest smooth bore pipework. Enhancing the airflow passing through the system as well as improving on the throttle response and ultimately the power output, the Charge Pipe Kit is expertly finished off in a durable crinkle black finish with the unique MMR logo etched into the side of the pipe.The MMR Charge Pipe Kit also includes a charge-cooler to throttle-body hard pipe for the easy addition of either a methanol or water injection. What's Included? Three high-flow aluminium charge pipes with CNC leak-free connections. Three silicone coupler hoses. C-clip. Jubilee clips. MMR Performance Product Code: MMRTCP10 Want to learn more about MMR Performance? Get in contact with a member of our BMW tuning experts at AET Motorsport for any additional details you require. With worked performed on our very own BMW M4, our team will have no problem answering any questions that you may have. Check out the MMR Performance Event Film below:

Read more less