Please note: Will not fit september 2020 models onward as ford have changed the engine! Description The Fully Re-Designed Intake Kit from Enhanced Performance adds both performance and visual beauty to your MK8 Fiesta 1.0 EcoBoost Expect to see gains of around 5-10BHP from stock, this kit will also function exceptionally along side any stage 2 remap. You can also run this induction kit on a fully standard EcoBoost with no issues! Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. Features Removes ugly original plastic & restrictive airbox. Adds power and torque  more responsive and exciting driving experience Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') free flowing Cone Airfilter CNC sensor boss Powder coated alloy heat-shield with C Performance logo laser cut into it. Adds style to your engine bay Easy fitting, takes less than 15-20 minutes to install (See guide here) Whats in the kit? 1x Enhanced Performance MK8 Heat shield powder coated black 1x CNC Sensor Tube 1x Choice of Cone Air Filter 1x Fitting Kit Warranty 12 months as standard! Videos Induction Kit Whilst Driving

Read more less

The new AIRTEC Motorsport induction kit that works perfectly with the standard 1.0 Fiesta Mk8 ST-Line.Expect to see gains of 5-10bhp compared to the original Airbox.Please note: This kit is designed to fit the pre 2020 model that has the turbo at the front. for the 2020-onwards 1.0 EcoBoost model with the turbo at the rear please see:  INDUCTION KIT FOR FIESTA MK8 1.0 & ST-LINE (REAR TURBO 2020 ONWARDS) Enhanced induction sound, great looks and loud recirculation dump valve noise on let off.Features: Removes ugly original plastic & restrictive airboxAdds power and torquemore responsive and exciting driving experienceEnhanced induction sound and turbo recirculation noise (dump valve ‘psssh’)free flowing Airfilter & optional k&n dry charger filter coverCNC maf sensor bossPowder coated alloy heat-shield with 80mm cold feed pipe which directs air to bottom of filterCold feed pipe, secure to bottom of heat-shield and secures to lower boost hose, or attach to front lower bumper as shown in the photoAdds style to your engine bayEasy fitting, takes less than 15-20 minutes to install It’s easy to fit, looks great, sounds even better, doesn’t cost the earth and can be put back to standard within 10 minutes (warranty)A simple modification that transforms the look of your engine bay. Please note: Bolt needs cutting if fitting optional silicone hose. Registered Design Right number 6023921 AIRTEC part no: ATIKFO17

Read more less

As part of our expanding Fiesta Mk8 platform product range, AIRTEC Motorsport is proud to launch our intake kit for the 2020 onwards 1.0-litre and ST-Line suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s original air intake system to allow more flow whilst maintaining low intake temperatures, improving response, as well as sound and aesthetics within the engine bay. Having previously designed a number of shielded induction kits for other performance models, we were keen to develop an extensive intake package for the 2020 onwards 1.0 EcoBoost model to offer significant improvements. Featuring a free-flowing cotton air filter, laser cut shield and accompanying aluminium intake pipe with billet MAF housing, our kit is a direct replacement for the restrictive OEM air box set up. To ensure the new air filter does not suffer with heat soak issues from the confines of the engine bay, the shield provides a barrier from the heat of the engine and is fed cold air from the original front intake. There is also the option to add a Pro Hoses silicone intake pipe, which replaces the flexible OEM item with a less restrictive, freer flowing hose that’s available in three colours to improve the look of the engine bay. The result is increased power, improved throttle response, heightened induction noise and a more pleasing look to the engine bay. The kit requires no additional drilling or cutting to fit and comes complete with all the correct fixtures and fittings, as well as detailed instructions. Please note: This kit is designed to fit the 2020-onwards 1.0 EcoBoost model with the turbo at the rear. The pre 2020 model has the turbo at the front – see here: induction kit for Fiesta MK8 ST-Line front turbo  Please ensure correct fitment before ordering.  Features: Comprehensive induction kit designed specially for the 2020 onwards Mk8 1.0 EcoBoost platform Large cotton air filter for improved flow and increased performance Laser cut shield helps to ensure lower intake temperatures Optional Pro Hoses intake hose to further improve flow Improved soundtrack and under bonnet aesthetics Long-lasting, high-quality black powder coat finish Includes all fixtures and fittings AIRTEC Part No: ATIKFO35

Read more less

"Its so good we put our name on it" Giving you the brand new Enhanced Pro Filter - Made by ProRam exclusively for CEUK (RamAir) The filter itself has a 90mm Inlet, and comes with 4x Reducer Rings allowing it to be installed to an 85mm, 80mm, 75mm and 70mm inlet also! A metal end cap allows for our EP Logo & the iconic CEUK logo to be laser engraved, whilst durable rubber polymer is used at the base to provide strength! Reinforced wire mesh holds this synthetic black cotton piece together with the grab bar featuring the iconic ProRam Logo.  The perfect replacement filter for your air intake kit! Neck Inside Diameter (A): 90mm Overall Width (B): 150mm Overall Length: 165mm

Read more less

ITG Air Filter for the Ford Fiesta ST Mk8 Please note: This will not fit Post 2020 EcoBoost models as there was a change to the shape - please ensure you check the shape VS your own airbox before ordering! The ITG Air Filter has been expertly designed in-house by ITG themselves to guarantee you the signature high quality that you'd expect from an ITG system.  Measuring from 161 to 217mm, the Mk8 Ford Fiesta ST Air Filter improves the air flow passing through the standard airbox on the Mk8 Ford Fiesta ST 1.5 EcoBoost (2018-) model. ITG Air Filters Part number: WB285 ITG produce a wide range of air filter systems for a number of make and models, if you're in need of that little extra power or you're just after a superior filter in general to reduce the amount of dust, then the ITG Performance Air Filter is the filter for you. Need to Learn More? Please contact a member of our Mk8 Fiesta ST tuning experts at AET Motorsport for any additional details you require regarding the ITG Air Filter. Our team will be more than happy to help with any questions that you may have regarding the product. Call or Email to discuss: Tel: 01924 228042 | Email: info@aetmotorsport.com

Read more less

K&N Cleaning Kit Aerosol 99-5000EU K&N Power Kleen works to dissolve the dirt build up and old filter oil, and can be washed away with water. This Recharger Kit comes with a 204 milliliter aerosol spray can of oil and a 355 milliliter K&N pump bottle of Power Kleen air filter cleaner.99-5000EU will restore air flow efficiency and will bring your K&N oiled cotton air filter to like new condition   Can be used on both Foam & Cotton / Pleated  Labeled in English, Spanish, Swedish, Polish and Czech Restores filter to like new condition Removes road grime, engine exhaust and grease from K&N filters The only cleaner designed specifically for K&N cotton filters

Read more less

ITG Air Filter to suit Ford Fiesta Mk 8 ST 1.5 EcoBoost & 1.0 EcoBoost from 04/2018 onwards. mk2 puma st ITG Air Filter Code WB280 measures 161 x 217mm Please note: This will not fit Post 2020 EcoBoost models as there was a change to the shape - please ensure you check the shape VS your own airbox before ordering!

Read more less

This tube is designed to be a part of the intake system, generally placed between the Air Filter and primary hose when replacing the Airbox for an Open Air intake kit Measuring 70mm Externally at the filter side, and 60mm externally at the hose side and housing the twist type sensors found on post 2015 fords. Pipe is fully black with engraved EP Logo, Featuring Bracket and black screw to secure sensor. Designed to fit with an air filter using a 70mm Inlet Confirmed Fitment: Ford Fiesta MK8 1.0 EcoBoost May fit other vehicles

Read more less

As seen on the Fiesta ST - this will fit all models and replaces the single air feed food on the NON st models Genuine Ford Dual Air Feed As Fitted to the New Fiesta ST 1.5T EcoBoost Direct fit to 1.0 Mk8 Ecoboost Fiesta   The Fiesta Mk8 1.0 Ecoboost is fitted with a single cold air intake tube and quite restrictive when adding power. This will restrict the amount of air able to be passed to the air filter assembly and subsequently to the engine and turbo lowering any potential power output. The Mk8 ST comes with a very similar setup but with dual feeds which is a direct fit onto the 1.0 increasing that much needed Cold Air Flow. Will not fit standard 1.0 airbox - requires intake kit to be fitted.

Read more less

Pro Hoses Induction Hose for Fiesta MK8 1.0 & ST-Line Designed to replace the restrictive OEM pipe, this larger silicone hose offers increased flow. Pro Hoses Part Number: PH/INDFO25 TECHNICAL DATA Pro Hoses Induction Hose for Fiesta MK8 1.0 & ST-Line Designed to replace the restrictive OEM pipe, this larger silicone hose offers increased flow. By reducing restriction within the induction system, air flow improves and potential power increases can be released. This hose is carefully engineered to be a direct replacement item, which ensures a simple DIY installation process and is offered in a choice of gloss black, performance blue or race red. Features: Improved air flow for increased power Simple DIY installation Direct replacement Enhanced induction sound Choice of three different colours Pro Hoses Part No: PH/INDFO25

Read more less

This air box & intake pipe replacement induction kit is designed specifically for the Ford Fiesta mk8 1.0 Ecoboost. This kit allows for increase in airflow and induction noise over the factory intake equipment. The heat shield replaces the factory air box and mounts to standard OEM mounting points, it also replaces the standard intake hose. Whilst an ECU remap is not required, it will perfectly compliment the increased potential airflow.

Read more less

These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of motorsport filtration the PRORAM range by Ramair is the premium choice on the market today for your fast road or track car. Neck Inside Diameter (A):70mm Overall Width (B): 150mm Overall Length: 185mm Component Dimensions Base Width: 150mm Base Length: 37mm Filter Top Width (D): 120mm Filter Base Width: 150mm Filter Length (C): 148mm Item Specifics Base Material: Rubber Polymer Base Finish: Gloss Base Colour: Black Filter Material: Synthetic Filter Reinforcement: Black Wire Mesh If 70mm Filters are sold out, you may receive a 90mm Inlet filter with a 70mm reducer ring! TECHNICAL SPECS Neck Internal Diameter 70mm EAN 5056185609656

Read more less