Torque Mounts

The Motorsport Line StreetSport Motor Mount Retrofit Kit for the Audi/VW MQB chassis is designed to convert your existing TrackSport Motor Mounts into StreetSport Motor Mounts. These heavy-duty mounts will result in a moderate increase in noise, vibration, and harshness (NVH) transfer into the cabin, as they are designed to drastically reduce engine movement compared to the factory parts, but will introduce less NVH than our TrackSport mounts due to the lower-durometer rubber used. Additional NVH is most noticeable at idle, but once the vehicle is moving, NVH is only slightly higher than stock. BUYER'S GUIDE: The following guide is designed to help customers choose which mount best meets their specific needs. StreetSport    TrackSport Power levels exceeding Stage 1    Power levels exceeding conventional stages Car is launched or taken to HPDE or Drag events    Car is heavily launched at drag strips or only used for track events Car is used on road as a commuter    Ultimate performance and rigidity is desired  Less NVH is desired    "Where we're going, we don't care about NVH!"    FEATURES: Converts TrackSport Mounts to StreetSport Mounts to Lower NVH Manufactured from 6061-T6 Billet Aluminum Anodized for Long Life and Great Looks Extreme-Duty for the Most Punishing Performance Applications Great Solution for Highly-Tuned Stock Turbo Power Levels Replaceable 50 Durometer Density Line Rubber Bushings with Void-Free Construction Significantly Less NVH than TrackSport Versions Virtually Indestructible Lifetime Warranty Updates One Set of Engine/Transmission HARDWARE REQUIREMENTS: This product is intended to be used in conjunction with one of the following products. The mount bases of the kits shown below are swapped with the mount bases in this kit, resulting in the same spec as our StreetSport mounts. 034-509-5028 - Motorsport Line TrackSport Motor Mount Pair for Audi 8V/8V.5 A3/S3, 8S TT/TTS, and VW MkVII Golf/GTI/R 034-509-5030 - Motorsport Line TrackSport Motor Mount Pair for Audi 8V.5 RS3 and 8S TTRS EVO DAZA NOTES: Lifetime warranty covers replacing Density Line rubber bushings should they ever wear out, and replacement of any billet aluminum component in the unlikely event of a failure.

Read more less

034Motorsport's Motorsport TrackSport Mounts for Audi 8V/8V.5 A3/S3 8S TT/TTS and VW Mk7 Golf/GTI/R models are the new standard in ultra-high performance. These mounts are designed with extreme performance in mind, manufactured from billet aluminum and high-durometer rubber, making them virtually indestructible, while maintaining better ride characteristics than polyurethane alternatives. These mounts have a lifetime guarantee regardless of power level applied and type of track racing they are used for. Motorsport TrackSport Mounts are void-free and fluid-free, eliminating the slop associated with the factory engine/transmission mounts, and are designed to be completely rebuildable with replaceable Density Line rubber bushings. These extreme-duty mounts will increase noise, vibration, and harshness (NVH) transfer into the cabin, as they are designed to drastically reduce engine movement compared to the factory parts. HIGH-DUROMETER RUBBER VS. POLYURETHANE: Density Line Mounts are manufactured from high-durometer rubber instead of polyurethane for a number of reasons. While vulcanized rubber mounts are more expensive to prototype due to increased complexity of manufacturing and high initial tooling costs, rubber is inherently better than polyurethane as a damping medium for mounts and bushings. Rubber is able to deal with stress under both tension and compression, while polyurethane mounts rely on the damping medium to be effective only under compression. Rubber is also excellent in shear, where polyurethane is ineffective, making it ideal for applications that apply a shear force to the bushing during articulation. Rubber does not pack and wear like polyurethane does, which ultimately results in a long-lasting part with consistent performance. BUYER'S GUIDE: The following guide is designed to help customers choose which mount best meets their specific needs. StreetSport    TrackSport Power levels exceeding Stage 1    Power levels exceeding conventional stages Car is launched or taken to HPDE or Drag events    Car is heavily launched at drag strips or only used for track events Car is used on road as a commuter    Ultimate performance and rigidity is desired  Less NVH is desired    "Where we're going, we don't care about NVH!"    FEATURES: Manufactured from 6061-T6 Billet Aluminum Anodized for Long Life and Great Looks Extreme-Duty for the Most Punishing Racing and Extreme Performance Applications Great Solution for Highly-Tuned Stock Turbo and Big Turbo Power Levels Replaceable 65 Durometer Density Line Rubber Bushings with Void-Free Construction Virtually Indestructible Lifetime Warranty Reduced Drivetrain Slop Decreased Engine Movement Under Load More Direct Power Transfer Improved Shifting Feel Complete Drop-In Replacement of Factory Engine/Transmission Mounts Sold in Pairs NOTES: Lifetime warranty covers replacing Density Line rubber bushings should they ever wear out, and replacement of any billet aluminum component in the unlikely event of a failure.

Read more less

This precision-machined bush insert has been carefully designed to reduce the range of movement in the OEM Lower Dogbone bush that counter acts engine movement under heavy acceleration and braking, resulting a firmer feel when shifting. To be sure that you have selected the correct bush insert for your vehicle please check the fitment guide below: CNC Machined from a single billet of aluminium alloy. All Forge machined parts go through a rigorous quality control procedure to ensure that they have been made to the highest standard (working to a tolerance of less than 0.1mm). With a hardwearing black anodised finish which protects the part from oxidation to ensure it looks its best for longer. Developed in house at our Gloucester R&D workshop with working prototypes 3D printed and test fitted. Part of a wider range of bush inserts Forge currently have in development, please see the Forge Motorsport website for details. This Bush Insert appears on the following vehicles:  Audi RS3 2.5TFSI. Audi TTRS 2.5TFSI. Audi TTRS 8s Audi TTS 2.0TSFI. Audi  S3  Seat Leon (290-300bhp) 2.0TFSI. Volkswagen Golf MK7 GTI 2.0TFSI. *When fitting please Torque to 135 Nm If your vehicle has this bush (part number : 5Q0 198 037 B) fitted  you need a type “A” insert, part number FMAM-B2 If your vehicle has the alternative bush (part number: 5Q0 198 037 C) fitted you need type “B” insert, part number FMAM-B3   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This precision-machined bush insert has been carefully designed to reduce the range of movement in the OEM Lower Dogbone bush that counter acts engine movement under heavy acceleration and braking, resulting a firmer feel when shifting. To be sure that you have selected the correct bush insert for your vehicle please check the fitment guide below: CNC Machined from a single billet of aluminium alloy.  All Forge machined parts go through a rigorous quality control procedure to ensure that they have been made to the highest standard (working to a tolerance of greater than 0.1mm). With a hardwearing black anodised finish which protects the part from oxidation to ensure it looks its best for longer. Developed in house at our Gloucester R&D workshop with working prototypes 3D printed and test fitted. Part of a wider range of bush inserts Forge currently have in development, please see the Forge Motorsport website for details. *When fitting please Torque to 135 Nm If your vehicle has this bush (part number : 5Q0 198 037 B) fitted  you need a type “A” insert, part number FMAM-B2 If your vehicle has the alternative bush (part number: 5Q0 198 037 C) fitted you need type “B” insert, part number FMAM-B3 We advise customers to carry out a visual check before ordering the VW Golf Mk7 bush insert as the dogbone bushes are interchangeable and can be retro fitted.

Read more less

TECHNICAL DATA AIRTEC Motorsport billet dogbone mount insert for MQB EA888. Designed to fill the larger void in the stock mount, to limit engine movement without loosing ride quality or introducing any unwanted addition road noise, vibration or harshness into the cabin. By fitting the AIRTEC Motorsport billet mount insert this restricts any wheel hop possible on harsh acceleration to ensure a smoother driving experience. Unlike other polyurethane options available, the billet mount will not wear over time. AIRTEC part no: ATMSVAG6

Read more less

The Ultimate PUMA MK2 ST Upgrade!! If you haven't changed the engine mount on your PUMA MK2 ST you're running on borrowed time, especially if you have done power upgrades such as a stage 1 remap. We learned a lot from the Fiesta ST180 with our VUDU rear motor mount/roll mount improving grip and massively reducing wheel hop we already knew a rear mount for the PUMA MK2 ST was going to be compulsory. Naturally this compliments the PUMA MK2 ST's amazing chassis and with our PUMA MK2 ST Remap this mount makes for an amazing drive. KEY FEATURES:- T6061 Aerospace grade aluminium body VUDU Specific sure hardness bushes to ensure longevity Stainless steel torque plate and connecting pin 12 Month manufacturer guarantee Testing the VUDU way!! check out the blog to read how we tested the VUDU PUMA MK2 ST engine mount at the prestigious Nürburgring along with over 10k road miles.  

Read more less

Lower Torque Mount Small Bush Insert PFF19-2221 Testing during the development of the engine mount to determine stiffness and the effect of fitting a Powerflex insert. In our Red 65 Shore A material, the movement of the engine mount is reduced by almost half for a given load by the engine. For ultimate engine stability we recommend using our complete engine mount PFF19-2221.

Read more less

Lower Torque Mount Large Bush Insert PFF19-2224 Testing during the development of the engine mount to determine stiffness and the effect of fitting a Powerflex insert. In our Red 65 Shore A material, the movement of the engine mount is reduced by almost half for a given load by the engine. For ultimate engine stability we recommend using our complete engine mount PFF19-2222.

Read more less

Steeda's streetable performance engine mount is manufactured from high grade billet aerospace aluminum and polyurethane bushings. This engine mount is a direct replacement for your rear engine mount. The increased bushing stiffness will reduce bushing deflection and reduce or eliminate wheel hop on your front wheel drive Fiesta. The reduced bushing deflection will also give your Fiesta a firmer shifting feel and put more of your vehicles power to the ground.Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less