Crossover & Hard Pipe

Pro Hoses Six-Piece Coolant Hose Kit for Hyundai I30N. A 6 PIECE hose kit available in 3 different colours, choose from Gloss Black, Performance Blue, Race Red. Currently made to order, please allow 3-4 weeks from order.

Read more less

Pro Hoses Boost Hose Kit for Renault Megane 4 RS280/300. To replace the stock boost hoses. Available in Gloss Black, Performance Blue, Race Red or Orange (Made to order – Please allow 2-4 Weeks)

Read more less

AIRTEC Motorsport big boost pipe kit for a Meglio (Megane turbo powered Clio) Designed to directly replace the original boost pipes and hoses with larger and freer flowing 50mm AIRTEC Motorsport hard pipes and Pro Hoses silicone connectors. This complete kit creates an easy, simple upgrade solution for a Renault Megane turbo converted Clio. Fits Clio 197 without factory air-con fitted (or air-con delete kit fitted). Comes complete with 2x hard pipes and 4x Pro Hoses silicone connectors. WILL FIT WITH STOCK MEGANE INTERCOOLER

Read more less

Pro Hoses boost symposer hose kit for Renault Clio 220 Trophy & Clio RS 1.6 200 Turbo. Available to buy individually or as a pair. Made by Pro Hoses.

Read more less

AIRTEC Motorsport hot side boost pipe for Renault Clio. now only available in black Features of hot side: Designed to increase air flow with no kinks and a less restrictive pipe – To fit standard and AIRTEC intercooler kits Will not fit with Ultra racing strut brace (Will require spacers) Only available in Pro-Series Black

Read more less

AIRTEC Motorsport hot side lower boost pipe for PUMA MK2 ST   Designed to increase airflow on the Fiesta MK8 ST-200 as a replacement of the restrictive standard boost pipe, the AIRTEC Motorsport hot side boost pipe creates a much smother air flow by replacing the restrictive bends and smaller diameter pipe.   Features: Swaged ends to prevent blowing of on bigger power cars. Will work perfect with standard or re-mapped Fiesta ST's. To fit with both, stock and AIRTEC intercooler. Resonator delete. Fitting takes less than 30 minutes to install and fits to standard boost hoses.   52mm pipe throughout, compared to the restrictive 42mm resonated standard pipe. AVAILABLE ONLY IN SILVER FINISH Registered Design Right number:

Read more less

Designed to replace the restrictive OEM pipe, this 10mm larger silicone elbow and alloy connector offers increased flow. By reducing restriction within the induction system, air flow improves and potential power increases can be released. The elbow is carefully engineered to be a direct replacement item, which ensures a simple installation process and comes with a gloss black Pro Hoses silicone hose, as well as all fixtures and fittings. Please note: fits PRE-FACELIFT (2017 to 2021) Features: 10mm larger internal diameter than stock Improved air flow for increased power CNC machined Simple DIY installation Direct replacement Enhanced sound Pro Hoses silicone connector Registered Design Right number: 6093143 AIRTEC part no: ATIKHYU2

Read more less

Adding to our growing range of performance parts, AIRTEC Motorsport are proud to introduce our big boost pipe kit suitable for the Hyundai I30N. Featuring a larger diameter, freer-flowing design, the boost pipes allow increased air flow.   TECHNICAL DATA Adding to our growing range of performance parts, AIRTEC Motorsport are proud to introduce our big boost pipe kit suitable for the Hyundai I30N. Featuring a larger diameter, freer-flowing design, the boost pipes allow increased air flow. On the hot side, from the turbo to the intercooler, the pipework features a 63mm diameter and on the cold side, from the intercooler to the throttle body, it increases to 70mm to further reduce restriction. The cold side is also a direct fit and match to own upgraded AIRTEC Motorsport intercooler’s outlet size, but can be used on standard intercoolers too. Both pipes are designed to directly replace the OEM boost pipes and come supplied complete with Pro Hoses silicone hose connectors and all required jubilee clips and fittings. AIRTEC part no: ATMSHYU5

Read more less

REVO INTERCOOLER PIPE UPGRADE The Revo Intercooler Pipe Upgrade kit reduces charge system resistance and improves flow over the restrictive stock pipework. Designed for the Audi B9 chassis with the longitudinal 2.0TFSi engine, this upgrade features larger internal diameters, fewer restrictions for smoother airflow, and optimised routing. Reinforced, oil resistant silicone hoses, lightweight mandrel-bent aluminium pipework and flush fit joins to eliminate turbulence, the Revo Intercooler Pipe upgrade is designed to fit either the stock or Revo Intercooler. A multitude of design features and attention to detail that only Revo offer means this a product that performs. KEY FEATURES Increased internal diameter Smoother airflow Fits Revo and stock intercooler +8HP & 9NM Water Meth Bung KIT CONTENTS Revo throttle pipe Revo charge hose Revo throttle pipe Silicones Hose clamps INCREASED VOLUME Each part of the kit has been designed to increase the overall diameter and increase internal volume. Larger charge air volume in the system means reduced flow resistance, allowing the turbo to expend more energy on air compression and less energy overcoming restrictions; resulting in more power. CHARGE HOSE DESIGN The Revo charge hose is a smooth custom-designed silicone hose, with a tapered first bend from the turbo outlet to gradually transition to a larger diameter. The charge pipe is designed to directly replace the OEM part utilising optimised pipe routing and a unique constant-diameter design. Wire helix reinforcement with 5mm wall thickness gives greater strength and rigidity while allowing enough clearance from engine parts, increasing performance without compromising fitment. THROTTLE PIPE DESIGN The Revo throttle pipe is much larger than the stock part, manufactured using mandrel-bent aluminium hard pipe volume has been increased by 23%. The reinforced oil resistant silicone hoses are stepped and ID-matched to promote laminar, uniformed flow across the transition of parts. This part also has an integrated water methanol bung placed near the throttle body, allowing easy access from the top of the engine bay.     RESEARCH AND DEVELOPMENT  All Revo products are designed in-house using the latest 3D printing technology, CAD and CFD software. Every product is rigorously tested utilising an in-house Hub dyno and Revo data acquisition software. The benefits of the Revo intercooler pipe upgrade allows the turbo to run more efficiently, moving a larger volume of air and minimising turbulence. This increases power and torque, especially in the middle of the rev range as highlighted during controlled dyno testing. PERFORMANCE  Back to back testing of both the OEM intercooler pipe work and Revo upgrade was carried out on an Audi A4 B9 (2.0 TSI EA888 Gen 3) fitted with Revo intercooler, Stage 2 Software and the stock air intake system. The overall power gains between the two sets of runs was 8HP and 9NM. DOCUMENTS The following documents are available to view: FITTING INSTRUCTIONS Download the Revo Audi B9 2.0 TFSI Intercooler Pipe Upgrade Instructions

Read more less